We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Infrared Sensor.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Infrared Sensor×セキュリティハウス - List of Manufacturers, Suppliers, Companies and Products

Infrared Sensor Product List

16~30 item / All 40 items

Displayed results

Low power consumption infrared sensor PXB-100SW

Low power consumption and capable of wireless operation, 4-stage high-power beam infrared sensor.

■Solar Power Compatible By combining the floodlight with a separately sold solar power unit, it can be used with single-sided wiring only on the receiver side, even in locations where dual-sided wiring is difficult. Additionally, by adding a solar power unit and a contact input unit to the receiver side, it can support full wireless operation. Therefore, it is possible to maintain surveillance up to 100 meters even in locations where wiring work is challenging. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee against failures or malfunctions caused by lightning strikes. ■Structure Preventing Insects (Insect and Drip Proof Design) Using insect-proof bushings that wrap around the wires and dedicated gaskets, it achieves dustproof, drip-proof, and insect-proof measures equivalent to IP65. The insect-proof bushing can be cut to match the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, it enhances the ability to distinguish between ambient light (such as sunlight and car headlights) and ensures reliable outdoor surveillance.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor PB-IN-200HFC

Infrared Sensor PB-IN-200HFC

■4-Stage Power Beam Adopts a 4-stage beam simultaneous cutoff method to prevent malfunctions caused by small animals. It features a high-power beam with a distance margin of 10 times. ■Modulation Frequency Switching Function The modulation frequency can be switched among four levels, preventing infrared wrapping and mutual interference. ■Light Emission Power Switching Function The light emission power can be switched between two levels, allowing for efficient settings according to the surveillance distance. ■Auto Gain Lock Function Within the maximum surveillance distance, it automatically sets the optimal sensitivity margin for any surveillance distance. ■External Environment Diagnosis Function If the light reception level decreases due to weather changes such as dense fog, heavy rain, or snowfall, it will notify you through environmental output. ■Programmable AGC Function Automatically increases light reception sensitivity during adverse weather conditions like dense fog, heavy rain, or frost to prevent malfunctions. ■Alarm Memory Display Function Easily check the sensors that have triggered an alarm. You can choose between auto-reset and manual reset options. ■Sound Check Function Allows for adjustments and confirmations through sound during light axis adjustment, operation checks after installation, alarm memory display, and gain lock confirmation.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor for visitor counter PLC-5B2

This is an infrared sensor for the visitor counter.

■Features ● Infrared sensor for customer counters with a detection distance of 5m (real-time output). ● It is a reflective sensor with an integrated light-emitting and light-receiving unit, allowing for wiring work only on the main unit side, which enhances maintenance. ● It uses a retroreflector, allowing for an incident angle of infrared rays of up to 30° (±15°). ● Compatible with all of our customer counter products.

  • Entrance and exit control system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-100EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

■This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas and Vapor Explosion Protection 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition degrees G1 to G4, accommodating most explosive gases. ■Dual modulation method By adopting our unique dual modulation method for the infrared beam, it enhances the distinguishability from ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies, "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-100EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-200EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas and Vapor Explosion Protection 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between external light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-400EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, it enhances the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, enabling multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor Near-infrared beam interruption type PR-11BE

Outdoor/indoor mountable one-sided wiring reflective infrared sensor.

■ Convenient one-sided wiring It can be used with one-sided wiring, making it suitable for locations where dual-sided wiring is difficult. Since the light-emitting and light-receiving parts are integrated into a reflective sensor, the wiring work only involves the sensor body. Additionally, maintenance is hassle-free. ■ Installable both outdoors and indoors The installation location is not limited to outdoors or indoors. Two types of attenuation sheets for light axis adjustment are included, one for outdoor use and one for indoor use. Mounting hardware for poles is also included as standard. (Compatible poles: φ38 to φ45mm) ■ Easy light axis adjustment Light axis adjustment can be done at just one location on the sensor. The adjustment is performed using a sighting device, the included attenuation sheet, and the light-receiving sensitivity indicator lamp. ■ Excellent disturbance light characteristics By adopting a special filter that efficiently cuts visible light and enhancing the disturbance light compensation circuit, it is unaffected by changes in illumination of up to 50,000 lux. Influences from sunlight, mercury lamps, fluorescent lights, and car headlights are not a problem under normal usage conditions. ■ Freely adjustable monitoring direction The lens section can be moved horizontally (±90°) and vertically (±10°), allowing for flexible setting of the monitoring direction, which does not limit the installation location and expands its applications.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor near-infrared beam interruption type (reflective type) PR-5B

Ideal reflective infrared sensor for close-range surveillance.

■ Ideal for close-range surveillance It outputs an alarm signal when an intruder interrupts the space between the reflective sensor and the mirror. It is perfect for monitoring indoor entrances, corridors, stairs, or notifying of visitors at the front door. ■ Compact slim design The thickness of the sensor body is 23.5mm, making it a compact size comparable to a pocket calculator. The color and design have been carefully crafted to allow for inconspicuous installation on walls, ensuring it does not create any sense of discomfort. ■ Easy installation This is a reflective sensor with an integrated light-emitting and light-receiving unit, so wiring work is only needed for the main unit. Additionally, it simplifies maintenance. ■ Excellent resistance to stray light Thanks to a special filter that efficiently cuts visible light and unique measures against stray light, it is hardly affected by external light sources such as sunlight. ■ Reflective mirror can be installed within a 30° range Using a retroreflective mirror allows for a comfortable incident angle of infrared rays up to 30° (±15°). This means installation locations are not limited, and applications are broadened. ■ User-friendly design ● Can be used with a wide range of voltages. (DC10.5V to 26V)

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Type (Reflective) Indoor 5m Use PR-5BU

Indoor embedded infrared sensor available in two types: reflector reflection type (for 5m) and direct reflection type (for 1m).

■Adopts two types of reflection methods It employs an infrared beam interruption method that detects blockage by the human body between the main unit and the reflector, outputting an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security monitoring. ■Easy installation Thanks to the integrated reflection method that combines the light-emitting and light-receiving units, it can be used with wiring only to the main unit. This allows the infrared sensor to be used even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it includes an optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■Uses a retroreflective reflector It uses a highly retroreflective reflector, allowing it to reflect in the direction of the sensor's optical axis within an incident angle of 30° (±15°), which broadens the range of possible installation locations and applications.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Indoor embedded infrared sensor available in two types: reflector reflection type (for 5m) and direct reflection type (for 1m).

■Adoption of two types of reflection methods The infrared beam is reflected by the human body passing through the area, and the light entering the main unit is detected, triggering an alarm using the infrared beam light entry method. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security monitoring. ■Easy installation Thanks to the integrated reflection method that combines the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This allows the infrared sensor to be used even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a built-in type, it includes an optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect both moving and stationary objects, making it suitable for various applications, including security. ■User-friendly design ● Contact switching function that can be set according to the operating system (a contact/b contact) ● Tamper function to prevent vandalism ● Alarm indicator light for convenient operation confirmation (red LED: lights up during alarm) ● Sensitivity adjustment available according to the installation location

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor near-infrared beam interruption type (reflective type) PR-10BA

A reflective infrared sensor with one-sided wiring that can vary the detection direction.

■Freely adjustable detection direction The sensor body can be adjusted within a range of 180° left and right, allowing you to freely set the detection direction. ■Easy operation confirmation and light axis adjustment It is equipped with an operation indicator light (red LED), making it easy to confirm operation. Additionally, the light axis can be adjusted solely on the sensor side. ■Easy installation As it is a reflective sensor with an integrated light-emitting and light-receiving unit, wiring work is only required for the main unit. This also reduces hassle during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector, the incident angle of infrared can be up to 30° (±15°), providing flexibility. This allows for a wider range of applications without limiting installation locations. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-bracket (BL-10 sold separately) further expands its applications. ● For new constructions, we recommend the recessed type that does not stand out and does not compromise aesthetics. ● The recessed PR-10BAU comes with a mounting box (for 3-gang switch box).

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor Near-infrared beam interruption type PR-10BAU

A reflective infrared sensor with one-sided wiring that can vary the detection direction.

■Easy operation confirmation and optical axis adjustment It has an operation indicator light (red LED), making it easy to confirm operation. Additionally, the optical axis adjustment can be made solely from the sensor side. ■Easy installation Since the light-emitting and light-receiving parts are integrated into a reflective sensor, wiring work is only required for the main unit. This also saves effort during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector, the incident angle of the infrared light can accommodate up to 30° (±15°). This allows for flexibility in installation locations and expands its applications. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-brackets (BL-10 sold separately) further expands its applications. ● For new constructions, we recommend a recessed type that does not stand out and does not compromise aesthetics. ● The recessed PR-10BAU comes with a mounting box (for 3-gang switch boxes).

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor near-infrared beam interruption type (opposite type) PB-30SU

Indoor embedded infrared sensor compatible with a single switch box.

■Compatible with single switch boxes It is compatible with commercially available single switch boxes (deep type), allowing for a neat installation with only a 7mm protrusion from the wall due to its slim design, enabling unobtrusive security. Additionally, the molded resin exterior (frame: white / cover: wine red) matches interior decor without compromising aesthetics. ■Light sensitivity adjustment function By attaching the cover to the main unit, it incorporates a light sensitivity adjustment function that automatically increases sensitivity. After removing the cover during installation or inspection to adjust the light axis, simply reattaching the cover will automatically enhance sensitivity, providing a more reliable security line. ■AGC circuit It is equipped with an auto gain control (AGC circuit) that automatically maintains appropriate sensitivity based on the surrounding environment. ■Light power switch The light power can be switched, ensuring optimal sensitivity according to the installation distance. ■Alarm contact switch The alarm output contacts can be switched, making it compatible with any system. 〈a contact (closed during alarm) / b contact (open during alarm)〉

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor PB-100T

Indoor two-beam infrared sensor with standard white cover.

■Strong against external light interference (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish incoming light from external sources (such as sunlight and car headlights), achieving highly reliable monitoring. ■Beam setting possible in any direction Both the projector and receiver can rotate their internal optical systems ±90° horizontally, allowing for arbitrary setting of the monitoring direction. ■User-friendly design Wide adjustment range (horizontal angle ±90°, vertical angle ±10°) ■Detection response time adjustment function The detection response speed can be continuously varied from 0.05 to 0.7 seconds using a volume control. This allows for countermeasures against false alarms according to the site conditions. ■Modulation frequency switching function This feature is effective when conducting linear monitoring with multiple infrared sensors or during multi-stage monitoring. By switching the modulation frequency of the pulse beams from the projector and receiver, mutual interference can be avoided. (Switching between modulation frequencies from 1CH to 4CH is possible) ■Two-stage beam simultaneous interruption method By adopting an AND method that does not trigger an alarm unless both upper and lower infrared beams are interrupted simultaneously, the risk of false activation due to momentary interruptions with a time lag is reduced.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Infrared Sensor