16～25 item / All 25 items
Custom One-Touch Coupler
Features 1. Easy connection by simply pushing the workpiece in. 2. Easily detachable by grabbing the sleeve and pulling it towards you. 3. The ratchet inside the coupler distributes pressure, preventing dents on the workpiece.
Custom One-Touch Coupler
Features 1. It is a one-touch coupler specifically for shrink tubes. 2. The four resin claws securely lock in place just by pushing it into the workpiece. 3. It can be easily removed by pushing the sleeve towards the shrink tube side. 4. The structure ensures that the packing closely adheres to the end face of the shrink tube for sealing.
Custom One-Touch Coupler
Features 1. It is a clip joint that grips the workpiece from the outside. 2. It connects by opening the clip and pushing it in. 3. The clip securely locks the protrusions of the workpiece. 4. It seals the inner circumference of the workpiece with an O-ring.
Custom One-Touch Coupler
Features 1. A coupler that connects to female-type workpieces. 2. Fixed by opening the ratchet and pushing it in. 3. Seals the inner circumference of the workpiece with an O-ring.
Custom One-Touch Coupler
Features 1. It has a structure that seals the workpiece in two places simultaneously (two claws move in parallel to lock the special male workpiece). 2. The workpiece can be attached and detached by moving two plates up and down. There are two holes in the coupler, allowing for simultaneous sealing. 3. There is a filling area at the back where fluid can flow.
Custom One-Touch Coupler
Features 1. A structure that seals the workpiece at two locations simultaneously (a structure where two claws move in parallel to lock the special male connector). 2. A structure that seals with an O-ring on the coupler side for the 2-pin connector B. 3. The specification with a swivel joint allows for easy attachment and detachment even if the piping position changes.
Custom One-Touch Coupler
Features 1. A coupler that completes sealing and locking simply by screwing in the screw, without the need for sealing tape that could cause foreign matter contamination. 2. Locking is completed as the packing comes into contact with the end face of the screw just by screwing it in. The structure enhances adhesion under internal pressure. 3. Easy to attach and detach without tools. (A hand-tightening structure that does not require tools or sealing tape.)
One-touch male thread joint
Features 1. A coupler that connects with a one-touch to the male threaded workpiece. 2. It locks and seals by pushing the end into the workpiece. 3. The packing adheres closely to the threaded end face to create a seal. 4. Equipped with a tightening function, allowing for emergency disconnection or additional tightening.
Custom One-Touch Coupler
Features 1. The claws close and lock simply by pushing into the workpiece. 2. Seals the inner circumference of the workpiece with an O-ring. 3. Easily removable by pulling the sleeve.
Custom One-Touch Coupler
Features 1. It has a structure that seals and locks through the friction between the workpiece and the rubber. 2. By applying clamp air, the packing contracts and holds the workpiece. When the clamp air is released, the packing opens and the workpiece can be removed. 3. A structure that seals the outer peripheral side of a workpiece where end-face sealing is difficult (air-driven).
