更新日： 集計期間:Feb 18, 2026～Mar 17, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
61～90 件を表示 ／ 全 102 件
16W high lumen, high-quality LED round fluorescent lamp
Direct factory sales, low prices, and the ability to manage delivery times, 10 years of experience in Japan, 2 years of quality assurance! 50,000 hours of long lifespan. Electricity costs reduced by half! 205mm, 225mm, 300mm, 375mm ● For more details, please download the catalog or contact us.
Wide angle 330 degrees luminous 110lm/W
We have achieved bright LEDs while reducing power consumption by adopting high-brightness SMD (Surface Mount Device) type LEDs. By using high-brightness LED chips, we have achieved sufficient brightness of 1000 lumens with a low power consumption of only 9W. Not only is the brightness impressive, but we also use chips with a high color rendering index of Ra>80, ensuring that colors appear vibrant and do not cause eye fatigue. The use of glass tubes minimizes brightness degradation even after years of use. 【Features】 ○ Emphasis on component selection, investing in finish and quality ○ Adoption of highly efficient LEDs → 110lm/w (bright with low power consumption) ○ Confidence in quality and price → A price that satisfies, with quality, brightness, and performance that meet expectations For more details, please contact us or download the catalog.
60,000 hours of long-life design. Cost reduction with the introduction of LED fluorescent lights!
Since the power supply device is separate, the lamp is very lightweight, significantly reducing the burden on the lighting fixtures compared to other LED lighting. With a wide beam angle of 270°, it effectively utilizes the reflective properties of the fixtures, illuminating the ceiling brightly. <Features> ● Compatible with G13 and R17d bases. ● Lightweight design at 210g. ● Designed lifespan of 60,000 hours. ● Various specifications and color temperature products available. For more details, please contact us or download the catalog.
No construction required, anyone can easily install it. Significantly reduces power consumption!
The FL Tube, compatible with glow and rapid starter ballasts and designed for direct power connection, is a lamp that can be installed without any modifications to existing fixtures (40W type). It can be used with glow and rapid-start fluorescent fixtures. From the day you replace it: - Power consumption is reduced by up to 50% - CO₂ emissions are significantly reduced - Designed lifespan is over four times that of fluorescent lamps Since wiring work by a qualified professional is not required, anyone can easily replace it and achieve LED conversion. Even if the existing ballast reaches the end of its life, it will light up again when directly connected to power (direct connection work requires an electrician). For more details, please contact us or download the catalog.
This is domestically produced FPL/FHP type LED lighting in Japan. It is for the SKRF series with three lights (one power supply for three lamps) and is reasonably priced in terms of cost and installation!
★Sample products are available for free rental!!★ *Limited quantities are available, so please act quickly. *We will consult with you in advance regarding the rental period. Point 1 ~【Made in Japan】 We achieve top-level high quality, short delivery times, and reliable after-sales service through integrated production at our own Aomori factory. It can be installed in existing compact fluorescent lamps and lighting fixtures (wiring and other construction may be required). Point 2 ~Up to 3 lamps can be connected with a single dedicated power supply (note). Installation costs are reduced, making it very affordable! (Note: The power supply and lamps are limited to our specified products. Please do not install products from other manufacturers.) Point 3 【Equipped with 4-level dimming function】 ~No special construction or dimming equipment is required. You can adjust the brightness in 4 levels using the existing ON/OFF switch. Power output: switches from 100% → 70% → 50% → 30%. Point 4 ~Since we manufacture in our own factory, we can accommodate various customizations. Examples: Light color: Various options from 3000K to 6500K Sizes: FPL36/FHP32W type, FPL55/FHP45W type, and others.
Initial cost 0 yen, installment payment available for up to 6 years, free samples available for loan! Lasts about 5 times longer than conventional fluorescent lights, made in Japan.
The Bright Compact Fluorescent Lamp for indoor lighting is a domestically produced (by Elebam) high-brightness, high-efficiency LED fluorescent lamp. Since LED fluorescents do not use harmful substances like mercury, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is reduced. 【Features】 ■ Same shape as compact fluorescent lamps → Can be installed in existing lighting fixtures as it has the same shape as conventional compact fluorescent lamps (FPL/FHP type). ■ Energy-saving, long lifespan, high quality → Utilizes high-performance LEDs to achieve energy savings and a long lifespan (40,000 hours) while maintaining high color rendering (Ra85). → The aluminum and polycarbonate used are recyclable. ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube. → The risk of injury from shattering is low even if dropped. ■ Proven and reliable domestic production → LED fluorescent lamps are produced in domestic factories. High performance and quality, as well as custom solutions for a wide range of demands. For more details, please contact us or download the catalog.
"Clara" straight tube LED
Easy to install due to the built-in power supply type.
The Glow/Rabbit starter you are currently using is replaceable.
The KFL40W-90W(WW) is a 40W type LED fluorescent lamp. It can replace the glow/rabbit starter currently in use. The light color is warm white (white), with a color temperature of 2700K (5000K) and a brightness of 510Lux at 1.0m. The power consumption is 20W, and the input voltage is AC100 to 220V. The color rendering index is 85, the beam angle is 120°, and the operating temperature range is -20 to +55°C. For more details, please contact us or refer to the catalog.
Initial cost 0 yen, maximum installment payment of 6 years, free sample, currently available for loan! Made in Japan.
The Bright straight LED fluorescent lamp for indoor lighting is a high-brightness, high-efficiency LED fluorescent light made in Japan (manufactured by Elebam). Since LED fluorescents do not use harmful substances like mercury, disposal is easy. Traditional fluorescent lights used glass, but LED fluorescent lights use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is reduced. 【Features】 ■ Energy-saving and environmentally friendly → Easy disposal as it does not use harmful substances like mercury → The aluminum and polycarbonate used are recyclable ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about 5 times longer than traditional fluorescent lights → Approximately 40,000 hours of long life (compared to traditional fluorescent lights' lifespan of about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacements For more details, please contact us or download the catalog.
Initial cost 0 yen, maximum installment payment of 6 years, free sample, currently available for loan! Domestic production, proven track record and reliability! Over 3 million units produced domestically.
The Bright straight tube LED fluorescent lamp for indoor lighting is a high-brightness, high-efficiency LED fluorescent light made in Japan (manufactured by Elebam). Since LED fluorescents do not use harmful substances found in mercury lamps, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is significantly reduced. 【Features】 ■ Energy-saving and environmentally friendly → Easy disposal as it does not use harmful substances from mercury lamps → The aluminum and polycarbonate used are recyclable ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about five times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to traditional fluorescent lamps' lifespan of about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacements For more details, please contact us or download the catalog.
No installation required, high-quality LED round fluorescent lamp 30*205mm
The LED round fluorescent lamp that does not require installation can be replaced with the existing round type 20 fluorescent lamp. It can be substituted for various conventional fluorescent lamps. It can be directly installed without any construction, making it convenient and eliminating labor costs. It has a long lifespan of 50,000 hours and can reduce electricity costs by half! It provides bright, uniform light without any unevenness. For more details, please download the catalog or contact us.
Initial cost 0 yen, maximum installment payment of 6 years, free samples available, currently on loan! Domestic high-brightness, high-efficiency LED fluorescent lights for indoor lighting, approximately 5 times longer lasting than conventional fluorescent lights.
The Bright straight LED fluorescent lamp for indoor lighting is a high-brightness, high-efficiency LED fluorescent light made in Japan (manufactured by Elebam). Since LED fluorescents do not use harmful substances found in mercury lamps, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is reduced. 【Features】 ■ Energy-saving and environmentally friendly → Easy disposal as it does not use harmful substances from mercury lamps → The aluminum and polycarbonate used are recyclable ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about five times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to the lifespan of traditional fluorescent lamps: about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacements For more details, please contact us or download the catalog.
Power consumption is about one-third of that of fluorescent lights! Additionally, with the dimming function, energy-saving effects are enhanced.
【Main Features】 ■ Energy-saving: Only 16.3W consumption (2,385lm) for a direct 40W type. ■ Dimming Function 【4-step dimming type (switch dimming)】 Can be dimmed to four levels of brightness. No dimming equipment is required. You can adjust the brightness in four levels using the existing switch (ON/OFF). Once set, it remains unchanged even when the power is turned off. In places like hallways or parking lots where strong brightness is not needed, you can dim to 30%, and in offices, you can set it to 70% or 50%. Why not use dimming effectively to save more on electricity bills? ＜Dimming and Power Consumption＞ 70% dimming (power consumption 16.3W), 50% dimming (11.7W), 30% dimming (7.0W), 100% dimming (23.4W) ■ Continuous Dimming: Supports continuous dimming with PWM method. If a dimming signal line is present, it can be replaced with LED. ■ Domestic Production: High quality is ensured through consistent production at our own Aomori factory (ISO certified).
Initial cost 0 yen, installment payments available for up to 6 years! 5-year warranty, free samples available for loan!
The Bright straight tube LED fluorescent lamp for indoor lighting is a domestically produced (by Elebam) high-brightness, high-efficiency LED fluorescent light. Since LED fluorescents do not use harmful substances found in mercury lamps, they can be disposed of easily. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is significantly reduced. 【Features】 ■ Energy-saving and environmentally friendly → Since they do not use harmful substances from mercury lamps, disposal is easy → The aluminum and polycarbonate used are recyclable ■ Safe materials that do not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about 5 times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to the lifespan of traditional fluorescent lamps: about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacements For more details, please contact us or download the catalog.
Power consumption is about one-third of that of fluorescent lights! Additionally, with the dimming function, energy-saving effects are enhanced.
**Main Features** ■ Energy-saving: Only 16.3W consumption for a direct tube 40W type (2,385lm) ■ Dimming Function **4-step dimming type (switch dimming)**: Can be dimmed to four levels of brightness. No dimming equipment is required. You can adjust the brightness in four levels using the existing switch (ON/OFF). Once set, it remains unchanged even when the power is turned off. In places like hallways or parking lots where strong brightness is not needed, you can dim to 30%, and in offices, you can use 70% or 50% dimming. Why not use dimming effectively to save on electricity costs? <Dimming and Power Consumption> 70% dimming (power consumption 16.3W), 50% dimming (11.7W), 30% dimming (7.0W), 100% dimming (23.4W) ■ Continuous Dimming: Supports continuous dimming using PWM method. If a dimming signal line is present, it can be replaced with LED. ■ Domestic Production: High quality is ensured through consistent production at our own Aomori factory (ISO certified factory).
Power consumption is about one-third of that of fluorescent lights! Additionally, with the dimming function, energy-saving effects are enhanced.
**Main Features** ■ Energy Saving: The direct tube type consumes only 16.3W (2,385lm) with a power rating of 40W. ■ Dimming Function 【4-Level Dimming Type (Switch Dimming)】 Can be dimmed to four levels of brightness. No additional dimming equipment is required. You can adjust the brightness in four levels using the existing switch (ON/OFF). Once set, it retains the brightness level even when the power is turned off. In places like hallways or parking lots where strong brightness is not needed, you can set it to 30% dimming, while in offices, you can use 70% or 50% dimming. Why not use dimming effectively to save on electricity costs? < Dimming and Power Consumption > 70% dimming (power consumption 16.3W), 50% dimming (11.7W), 30% dimming (7.0W), 100% dimming (23.4W) ■ Continuous Dimming: Supports continuous dimming using PWM method. If a dimming signal line is available, it can be replaced with LED. ■ Domestic Production: Ensures high quality through consistent production at our own Aomori factory (ISO certified).
High brightness, high quality, energy-saving LED straight fluorescent lamp. Low heat generation, safe fluorescent lamp.
T8 20W Type High Brightness LED Fluorescent Lamp with PSE, CE, and ROHS certification. 【Product Benefits】: 1. Energy-saving and economical. LED fluorescent lamps do not require heat to produce light, making them efficient with low power consumption. Naturally, this significantly reduces electricity costs. 2. Long lifespan of 50,000 hours. The lifespan of LED fluorescent lamps is about 50,000 hours, which is eight times longer than regular fluorescent lamps. Therefore, it reduces the hassle and cost of replacements. 3. Instant lighting. The response time of LED fluorescent lamps is very short. They become bright instantly when the switch is turned on. 4. Low heat generation. LED fluorescent lamps emit very little ultraviolet and infrared radiation, resulting in low heat generation. Thus, they do not get hot under the light, making it less attractive to insects. 5. Environmentally and human-friendly. They are safe, free of harmful substances, and non-polluting. 6. Bright and high brightness. 7. High color rendering. ● For more details, please download the catalog or contact us.
Initial cost 0 yen, supports installment lease payments for up to 6 years! 5-year warranty, free sample available for loan! Domestic high-brightness, high-efficiency indoor LED fluorescent lights.
The indoor lighting Bright straight tube LED fluorescent lamp is a domestically produced (by Elebam) high brightness and high efficiency LED fluorescent light. Since LED fluorescents do not use harmful substances found in mercury lamps, they can be disposed of easily. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is significantly reduced. 【Features】 ■ Energy-saving and environmentally friendly → Since they do not use harmful substances from mercury lamps, disposal is easy → The aluminum and polycarbonate used are recyclable ■ Safe materials that do not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about 5 times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to traditional fluorescent lamps' lifespan of about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacement For more details, please contact us or download the catalog.
★2本無料サンプル貸出可能★コンパクト蛍光灯FDL/FHPを既存器具使用でLEDに交換可能。LEDに交換で電気代を削減！
■海外から直輸入のため低価格でお出しが可能です。 ■コンパクト型FDL/FHP蛍光灯代替LED製品です。 ■白色・電球色取り揃えております。 ■既存器具をそのまま利用可能 ■安心の2年間保証
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more secure LED fluorescent lights, Nano LED. Ideal for apartments.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Of course, the performance of LED fluorescent lights is important, but the most crucial part of LED fluorescent lights, known as the "life of the LED," is the converter, which is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Free Sample Available] Reduce Electricity Costs of Fluorescent Lights! Safer and More Reliable LED Fluorescent Lights - Nano LED. Ideal for Factory Offices.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Of course, the performance of LED fluorescent lights is important, but the most crucial part of LED fluorescent lights, known as the "life of the LED," is the converter, which is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more reliable LED fluorescent lights, Nano LED. Ideal for offices.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Of course, the performance of LED fluorescent lights is important, but the most crucial part of LED fluorescent lights, known as the "life of the LED," is the converter, which is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more reliable LED fluorescent lights, Nano LED. Ideal for restaurants.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Of course, the performance of LED fluorescent lights is important, but the most crucial part of LED fluorescent lights, known as the "life of the LED," is the converter, which is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs for fluorescent lights! Safer and more secure LED fluorescent lights, Nano LED. Ideal for supermarkets.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Not only does the LED fluorescent light perform well, but the most important part of the LED fluorescent light, known as the "life of the LED," is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more secure LED fluorescent lights, Nano LED. Ideal for automobile showrooms.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Of course, the performance of LED fluorescent lights is important, but the most crucial part of LED fluorescent lights, known as the "life of the LED," is the converter, which is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more reliable LED fluorescent lights, Nano LED. Ideal for coin laundries.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Of course, the performance of LED fluorescent lights is important, but the most crucial part of LED fluorescent lights, known as the "life of the LED," is the converter, which is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs for fluorescent lights! Safer and more reliable LED fluorescent lights, Nano LED. Ideal for convenience stores.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Of course, the performance of LED fluorescent lights is important, but the most crucial part of LED fluorescent lights, known as the "life of the LED," is the converter, which is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more secure LED fluorescent lights, Nano LED. Ideal for golf courses.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Not only does the LED fluorescent lamp perform well, but the most important part of the LED fluorescent lamp, known as the "life of the LED," is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lamps and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more secure LED fluorescent lights, Nano LED. Ideal for nursing facilities.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Not only does the LED fluorescent lamp perform well, but the most important part of the LED fluorescent lamp, known as the "life of the LED," is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lamps and converters, delivering "brighter lighting" to the entire world.
[Available for rental from 1 free sample] Reduce electricity costs of fluorescent lights! Safer and more secure LED fluorescent lights, Nano LED. Ideal for bicycle parking lots.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Not only does the LED fluorescent light perform well, but the most important part of the LED fluorescent light, known as the "life of the LED," is produced in-house with NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lights and converters, delivering "brighter lighting" to the entire world.
