Magnetic Field Probeのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Magnetic Field Probe - メーカー・企業4社の製品一覧とランキング

Magnetic Field Probeの製品一覧

16～22 件を表示 ／ 全 22 件

表示件数
XF-R 400-1 (H field magnetic field probe)

XF-R 400-1 (H field magnetic field probe)

Same basic structure as the "XF-R 100-1" and "XF-R 3-2" probes!

The "XF-R 400-1 Magnetic Field Probe" is a passive near-field probe with a head size of 25mm in diameter. It has high sensitivity and is suitable for measurements within a maximum range of 10cm around assemblies and devices. The larger the tip diameter, the higher the sensitivity, allowing for the detection of magnetic fields over a wider area. Additionally, the XF series magnetic field probes come with a built-in 50Ω termination resistor. 【Specifications】 ■ Type: Near-field Probe ■ Size: Φ25mm Probe Head ■ Frequency Range: 30MHz to 6GHz ■ Connector: SMA female, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
XF-B 3-1 (H field magnetic field probe)

XF-B 3-1 (H field magnetic field probe)

Detecting magnetic field lines radiating at a 90° angle from the measurement target!

The 『XF-B 3-1』 magnetic field probe is a passive near-field probe. The internal coil is arranged perpendicular to the shaft, allowing for accurate measurements when the probe head is used vertically against the assembly or device being measured. For example, it can be approached from above to access difficult-to-reach printed circuit boards sandwiched between components. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ4mm probe head ■ Frequency range: 30MHz to 6GHz ■ Connector: SMA female, Jack ■ Resolution: 2mm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
RF-R 400-1 (H field magnetic field probe)

RF-R 400-1 (H field magnetic field probe)

The current attenuation sheath provides a solid electrical shield!

The "RF-R 400-1" magnetic field probe is a passive near-field probe with a head size of 25mm in diameter. It has high sensitivity and is suitable for measurements in a range of up to 10cm around assemblies and devices. The larger the tip diameter, the higher the sensitivity, allowing for the detection of magnetic fields over a wider area. It has the same basic structure as the "RF-R 50-1" and "RF-R 3-2". 【Specifications】 ■ Type: Near-field probe ■ Size: Φ25mm probe head ■ Frequency range: 30MHz to 3GHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
LF-R 3 (H field magnetic field probe)

LF-R 3 (H field magnetic field probe)

It is compact and very easy to use, and it is also electrically well shielded due to the current attenuation sheath.

The "LF-R 3 Magnetic Field Probe" is a passive near-field probe that directly detects RF magnetic fields on assemblies with high resolution, including IC pins, IC cases, conductive paths, decoupling capacitors, and areas surrounding EMC components. It has the same basic structure as the "LF-R 50" and "LF-R 400" probes, but this product offers the highest resolution. It is suitable for measurements close to components with high magnetic field strength, but not for measurements from a distance. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ3mm probe head ■ Frequency range: 100kHz to 50MHz ■ Connector: SMB male, Jack ■ Resolution: 1mm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
LF-U 5 (H field magnetic field probe)

LF-U 5 (H field magnetic field probe)

Can be connected to a 50Ω input spectrum analyzer or oscilloscope!

The "LF-U 5 Magnetic Field Probe" is a passive near-field probe designed to detect magnetic fields from a wide range of conductive paths, cables, connectors, electronic components, and more. The probe functions like a coupling clamp. Position the curved bottom of the probe on the surface of the component. It also detects magnetic field lines coming straight or from the side from other sources relative to the probe. 【Specifications】 ■ Type: Near-field Probe ■ Size: 6×6mm Probe Head ■ Frequency Range: 100kHz to 50MHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
LF-U 2.5 (H field magnetic field probe)

LF-U 2.5 (H field magnetic field probe)

During measurement, place the probe head gap on the object being measured!

The "LF-U 2.5 Magnetic Field Probe" is a passive near-field probe designed to selectively detect RF currents in conductive paths, SMD components, and IC pins. The probe head features a magnetically active gap approximately 0.5mm wide. It functions similarly to the "LF-U 5" probe. While the "LF-U 5" is suitable for larger components such as cables and connectors, this product is designed for SMD components and pins. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ4mm probe head ■ Frequency range: 100kHz to 50MHz ■ Connector: SMB male, Jack ■ Resolution: 0.5mm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wavecontrol Magnetic Field Probe WPH1000

Wavecontrol Magnetic Field Probe WPH1000

The new WPF1000 magnetic field probe features a high sensitivity of 0.018 A/m, isotropic RMS measurement, and complies with international standards.

New H-field broadband probe WPH1000 from Wavecontrol! High sensitivity of 0.018 A/m, isotropic RMS measurement, and compliant with international standards for magnetic field probe WPF1000. 【Main Features】 - High sensitivity - Isotropic & RMS measurement - Excellent attenuation - Compliant with international standards

  • EMC Testing
  • Strength Testing Equipment
  • Other electronic measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Magnetic Field Probeの関連カテゴリ

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.