Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
121～150 item / All 205 items
IEC61850-3/EN50155 Industrial Optical Media Converter: IMC-P111-M12 Series
◆IEC61850-3 and EN50155 compliant optical media converter ◆With LFP function ◆IP30 enclosure ◆1×10/100Base-T(X) M12 connector ◆For substation and railway network applications
Control and monitoring possible via NMC in FRM220 management chassis!
The 『FRM220-10GCM』 is a 2-port 10GBase-R and 1-port 100M/1G/2.5G/10GBase-T Ethernet converter. It has built-in SNMP and web-based management features, allowing network administrators to monitor, configure, and control each 10G converter (both local and remote). Additionally, it is equipped with one 100M/1G/2.5G/10GBase-T RJ45 port, enabling connection of 100M/1G/2.5G/10G compatible devices to a 10G Ethernet fiber backbone. 【Features】 ■ Local/Remote In-band management support ■ Far-end fault indication (FEF indication) ■ Auto-sensing/Auto MDI/MDIX ■ LFPT function ■ Flow control (pause) *For more details, please download the PDF or feel free to contact us.
Industrial gigabit PoE media converter for interface conversion between copper wire (UTP) and optical fiber!
The 『IMC-1001S-PHE』 is an industrial-grade unmanaged PoE Gigabit media converter equipped with 1 UTP port and 1 SFP port. Compliant with the IEEE 802.3af/at (PoE+) standard, it can supply up to 30W of power to PoE-enabled devices. It supports dual-rate (100/1000Mbps) SFP, allowing for speed selection on the fiber side. Designed for use in harsh environments such as IP surveillance systems, industrial networks, and ITS (Intelligent Transportation Systems), it is also suitable for defense and public infrastructure applications. 【Features】 ■ Equipped with DIP switches for various function settings ■ Robust metal housing compliant with IP30 / fanless design ■ Wide temperature operation range of -20 to 70℃ ■ Supports Jumbo frames (up to 9K bytes) ■ Provides reverse connection protection and overcurrent protection ■ Redundant 48VDC input power supply (removable terminal block) *For more details, please download the PDF or feel free to contact us.
It converts RS422/RS485 serial communication into optical signals in hazardous locations, enabling long-distance transmission via optical fiber.
It can be used for control and other operations with explosion-proof equipment in hazardous locations, and when using fiber optic cables for data communication to safe areas. It has a built-in switching power supply and can be used with an AC100V power supply. *Electrical equipment used in hazardous locations, even if it has explosion-proof certification overseas such as IECEx or ATEX, cannot be used in Japan unless it has passed domestic explosion-proof testing. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas.
Ultra-compact! 10GBASE-T/R (SFP+) compatible media converter [Interop Best of Show Award Judge's Special Award]
The "LEX1881-1F" is a super compact media converter for 10G electrical/optical connections. It can be mounted in a modular chassis (LEX1012-15/45). The 10G optical module uses SFP+ and supports 10GBASE-SR/LR/ER/ZR. Single-core types (20km/40km/60km) and CWDM-compatible SFP+ are also available. It transmits repeater operation, jumbo frames, and VLAN-tagged frames. 【Features】 ○ Supports Auto-Negotiation and Auto MDI/MDI-X ○ No frame size limitations or frame control (due to repeater operation) ○ Standards compliant: 10GBASE-T, 10GBASE-R ○ Equipped with LFP (Link Fault Pass-Through) function (configurable via DIP switch) ○ Equipped with LLR (Link Loss Return) function *For more details, please contact us or download the catalog for viewing.
![[Case Study] Miyawaka City Intranet](https://image.mono.ipros.com/public/product/image/ef3/2000347127/IPROS7922793496033239395.jpg?w=280&h=280)
Supporting the construction of regional intranet networks! Case study of the introduction of FXC-made media converters.
We would like to introduce a case where FXC-made media converters were adopted in the Miyawaka City regional intranet network configuration. By mounting the introduced media converters on the MCMRARK100 (rack mount), we enabled power redundancy and monitoring via SNMP. Additionally, the link forward function allows for easy detection of abnormalities during fiber optic line breaks, which was a concern with conventional media converters. In addition to the media converters, we have also introduced FXC-made switching hubs in some locations. These products offer excellent cost performance and provide a range of user-friendly options for engineers. [Case Study] ■ Miyawaka City Intranet ■ Products Introduced: FXC-made Media Converters *For more details, please refer to the PDF document or feel free to contact us.
100BASE-FX/1000BASE-X media converter
■Achieved the world's smallest size (※1) as a Gigabit media converter supporting Ethernet OAM. ■Uses SFP for optical modules. Compatible with 100BASE-FX/1000BASE-SX/SX2/LX/ZX. Single-core types (BiDi/BX) and CWDM-compatible SFPs are also available! ■Switch operation. Supports jumbo frames. ■Supports power loss notification function (Dying Gasp). ■Signal Detect can be confirmed via LED. ■Fanless design, made in Japan, domestic quality. (※1) Based on our research for standalone (single unit) Gigabit media converters supporting Ethernet OAM. ●For more details, please contact us or download the catalog.
Ideal for installation in locations where securing power is difficult, such as factories and remote areas (dams/riverside), "NC1G-PE Series" surveillance cameras.
The "NC1G-PE series" is a media converter that converts between 10/100/1000BASE-T and 1000BASE-X. It is equipped with PoE receiving functionality (802.3af), making it an ideal product for installation in locations where securing power is difficult, such as surveillance cameras in factories or remote areas (dams/riversides). Additionally, it features LFP functionality, which is helpful for identifying the cause of issues when they occur. For more details, please contact us or download the catalog.
The "NC1G Series" media converter enables low-cost network construction for offices, factories, schools, and more.
The NC1G series (AC Type) is a media converter that converts between 10/100/1000BASE-T and 1000BASE-X. The link supports only auto-negotiation and, while being cost-effective, is equipped with LFP (Link Fault Pass Through) functionality. If the link is disconnected, it automatically disconnects the other link, which helps in identifying the cause during a fault occurrence. This product features one 10/100/1000Mbps RJ45 port and one 1000BASE-X SFP port, and it uses the included AC adapter for power. The SFP slot is fixed for implementation, and there are three models available: one with a 1000BASE-SX SFP, one with a 1000BASE-LX SFP, and one with a single-fiber bidirectional (LC or SC) configuration. The single-fiber bidirectional model should be used in pairs with 1310nm (Type A) and 1550nm (Type B). For more details, please contact us or download the catalog.
Industrial media converter that converts 10/100/1000BASE-T to 1000BASE-SX/LX.
The MCI2000 series is an industrial media converter that operates in a wide temperature range of -40℃ to +75℃, converting 10/100/1000BASE-T to 1000BASE-SX/LX. In addition to standard features, products in this series support LFP (Link Fault Pass Through) functionality and can operate within a voltage range of DC12V to 48V. Furthermore, it is designed for industrial environments with high reliability, featuring a wide operating temperature range, alarm relay terminals that output alarm signals to prevent troubles in the event of port shutdowns or power failures. For more details, please contact us or download the catalog.
Transparent communication regardless of the protocol! Low-latency transmission, less than a few ns (10GbE transmission).
We would like to introduce our media converter, the 'FX-112GSX series'. It features a lineup of SFP+ modules compatible with 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, and 10GBASE-ZR. Additionally, we offer CWDM and single-core type SFP+ modules, allowing multiple lines to be transmitted over a single optical fiber. 【Features】 ■ Repeater (transparent) communication ■ Extensive SFP+ lineup ■ Network monitoring support ■ LFP function included *For more details, please refer to the PDF materials or feel free to contact us.
Is the lightning protection measures perfect? Changing the LAN cable to POF (plastic optical fiber) is one of them.
To protect various measuring instruments and precision machinery from lightning damage, I believe that on-site personnel are implementing surge protection products (such as lightning guards) and taking measures such as "turning off the power and unplugging the devices" every time lightning occurs. However, lightning damage can also occur due to direct strikes, as well as significant induced currents caused by electromagnetic induction, which can affect those devices that are often connected via LAN. Therefore, as a countermeasure, it is difficult to unplug all LAN cables connected to the devices, so our company has promoted the use of plastic optical fiber (POF) for LAN cables and developed a DIY kit for POF media converters that can be installed by the on-site personnel themselves.
A media converter that efficiently realizes network construction at a low cost. We will introduce methods to maximize benefits with minimal capital investment.
◆◆Media converters are the key to achieving cost-effective network integration◆◆ LAN cables are virtually the industry standard for wiring in local area networks (LAN). LAN cables have evolved to support Ethernet speeds of 10 gigabits and above. In the use case analyzed in this white paper, fiber optic cables emerge as the optimal choice for building a LAN. By using media converters, you can extend the distance of the LAN with fiber optics while enhancing network security and connecting fiber optics to the desktop. This document explains how to integrate LAN cables and fiber optic cables in new or existing IT infrastructure to maximize benefits with limited capital investment.
This is a PoE-compatible media converter that converts 10/100/1000BASE-T to 1000BASE-SX!
Model Number: LPS500A-MM-LC-R3 ■ Maximum 30W, supports 802.3at ■ Compliant with EN62368 ■ Supplies power to PoE devices via CATx link ■ Monitors signal loss on both receiving ports of LAN cables and fiber with link failure pass-through ■ Prevents loss due to data transmission over invalid links with remote fault detection ■ Supports 802.3x flow control on full-duplex ports and back pressure on 10BASE-T/100BASE-TX half-duplex ports ■ Jumbo frame support (2 KB in normal mode, 9 KB in cut-through mode) ■ Warranty: Free 2-year send-back service
Introducing the compact design of the small and lightweight "DN2800E Series"!
The "DN2800E series" is a media converter specifically designed for 100M use. It has a wide operating temperature range and can be economically converted to optical. Additionally, as a repeater type, it can transmit regardless of packet length and can also transmit VLAN-tagged packets. Furthermore, it can be directly mounted into our media converter chassis (each series of DNHDxE), making it suitable for storage in a 19-inch rack or for fixing to a DIN rail, while featuring a compact design that is small and lightweight. 【Features】 ■ Media converter specifically designed for 100M use ■ Wide operating temperature range and economical optical conversion ■ As a repeater type, it can transmit regardless of packet length ■ Capable of transmitting VLAN-tagged packets ■ Compact design that is small and lightweight *For more details, please refer to the PDF document or feel free to contact us.
Achieve stable communication resistant to noise! An industrial media converter compatible with DIN rail mounting.
The "DN2400E" is an industrial media converter dedicated to 100M. It is an industrial model with high environmental resistance and is compatible with DIN rails. It has high noise resistance in accordance with JISC61000-6-2, and operates as a repeater, enabling data transfer with the shortest delay. 【Features】 ■ 100M dedicated type media converter ■ Industrial model with high environmental resistance ■ High noise resistance in accordance with JISC61000-6-2 ■ Low-latency transmission through repeater operation ■ Available in board state ■ Board moisture-proof coating *For more details, please refer to the PDF document or feel free to contact us.
![RS232-RS422/485 Converter [ISC-1112-I]](https://image.mono.ipros.com/public/product/image/675/2000336499/IPROS6293827590634836949.jpg?w=280&h=280)
ORing Industrial RS-232 to RS-422/485 Serial Media Converter (Isolated Type)
This is a serial media converter with the following features: ● Supports various baud rates and data formats ● Supports automatic RS-485 data flow control ● Compatible with a maximum baud rate of 115.2 Kbps ● Accepts +9~30 VDC input ● ABS plastic housing ● Compatible with DIN rail and wall mount installation
Ideal for harsh FA environments with noise! Usable in a wide range of environments due to its broad temperature range.
The "DN2400E Series" is an industrial media converter that complies with the immunity standard "JIS C 61000-6-02" for factory environments, achieving strong resistance to noise and stable communication. It is available not only in a chassis type but also in a board type, making it suitable for installation in areas with limited space. Additionally, the board is coated with a moisture-resistant coating, making it less susceptible to ESD and gas influences. 【Features】 ■ High noise resistance ■ Suitable for installation in areas with limited space ■ Moisture-resistant coating on the board ■ Low latency transmission ■ Usable in a wide range of environments due to a guaranteed temperature of -20 to 60°C *For more details, please refer to the PDF document or feel free to contact us.
A fiber optic media converter that allows for changes in mode (single, multi) and number of fibers (1 fiber, 2 fibers).
The "MCT-5002FSMSFP+" is a compact media converter that implements two SFP+ slots and supports 1000BASE-X/10GBASE-R fiber-to-fiber connections. By complying with the 3R regenerated optical output standards, it enables data transfer between different optical communication devices. Additionally, it features a loopback test function and a signal loss alarm function for link diagnostics and troubleshooting. 【Features】 ■ 3R regenerated optical output ■ Compact size ■ Plug and play ■ Compatible with dedicated rack mount chassis ■ Compliant with IEEE802.3ae:10GBASE-R/IEEE802.3z:1000BASE-X *For more details, please refer to the PDF document or feel free to contact us.
Compact model compatible with 1000BASE-X / Lineup also includes models compatible with 100/1000BASE-X
The "MCT-3002 series" is a compact media converter equipped with simple functions that can be installed in a space-saving manner. It is a media converter capable of converting between 10/100/1000BASE-T and 1000BASE-X. Despite being a simple model, it features a link failure notification function, allowing users to check for link failures on the opposite end via the device's LED. There is also a dual-rate model that supports 10/100/1000BASE-T and 100/1000BASE-X, enabling selection of equipment based on the installation environment. The device's LED allows for easy confirmation of link status and the transmission speed settings of the device, making it simple to check the communication status. 【Features】 ■ Compliant with 10/100/1000BASE-T ■ Compliant with 1000BASE-X (100/1000BASE-X) ■ Conversion between fiber optic and UTP ■ Plug and play ■ Link failure notification via link alarm *For more details, please refer to the PDF document or feel free to contact us.
Bridging the gap between traditional Ethernet and automotive Ethernet! Compact size and powerful.
The "RAD-Moon" is an automotive Ethernet media converter that connects one port from the BroadR-Reach (100BASE-T1) physical layer to one port of 4-wire 10/100 Ethernet (100BaseTX). It is low-cost, compact in size, and high-performance, making it suitable for applications such as monitoring, analysis, and diagnostics in automotive Ethernet environments. It is designed to be small and robust enough to fit into a laptop bag for easy transport. 【Features】 ■ USB powered ■ Master-slave auto-configuration ■ Active link LED for both PHYs ■ Compact size ■ Aluminum housing *For more details, please refer to the PDF materials or feel free to contact us.
Compact and sturdy design! An Ethernet media converter that can be easily carried in a PC bag.
"RAD-Moon 2" is a cutting-edge Ethernet media converter for in-vehicle Ethernet applications. It is designed to be compact and robust, making it easy to carry in your laptop bag. Additionally, it functions as a media converter, allowing the PC to exchange information with a 100/1000BASE-T1 ECU. This enables users to perform node simulations, direct diagnostics, or ECU flashing. 【Features】 ■ 100/1000BASE-T1 via Marvell 88Q2112 PHY ■ Network activity displayed in a bar graph ■ Power input range of 4.5 to 40V, suitable for use with vehicle power supplies ■ Durable USB Type-C connector for power, configuration, and PHY register monitoring *For more details, please refer to the PDF document or feel free to contact us.
Ideal for carrying in a bag for a laptop! We offer a compact and sturdy casing.
The "RAD-Moon3" is a new Ethernet media converter for in-vehicle Ethernet applications. It converts the physical layer of Ethernet from MultiG BASE-T1 at 2.5/5/10 Gbit to the same MultiG BASE-T. This is necessary for directly connecting a PC equipped with standard 8-wire Ethernet to in-vehicle ECUs and switches that use the vehicle-specific 2-wire Ethernet. It offers a compact and robust housing suitable for carrying in a laptop bag. 【Features】 ■ Membrane buttons for device configuration without software ■ Adopts the H-MTD connection method designed for MultiGBASE-T1 ■ Power supply range of 4.5 to 40V, powered from a barrel jack for in-vehicle power supply ■ Allows monitoring and updating of PHY registers via USB using Vehicle Spy or Intrepid's open-source API *For more details, please refer to the PDF document or feel free to contact us.
Expand the usable range from the sensor to the controller! Compact and sturdy aluminum housing.
The 'RAD-Phobos Series' we handle is a media converter that performs conversion, repetition, splitting, and aggregation of SerDes links. It helps to equalize GMSL2 or FPD-Link III interfaces and extends the usable range from sensors to controllers. Additionally, this device can monitor the lock and link status of input and output video ports. 【Features】 ■ Input/Output: FAKRA Code Z (Water Blue) ■ Configurable I2C address and link mode ■ Power over Coax Injector (depending on version) ■ Power range: 5-40V ■ Supports the full bandwidth of SerDes links *For more details, please refer to the PDF materials or feel free to contact us.
Connection distance up to 550m to 80km! Switch-type Fast Ethernet/Gigabit Ethernet media and rate converter.
The CentreCOM MMC200/MMC2000 series is a standalone media converter that converts 10/100/1000BASE-T twisted pair cables and fiber optic cables. It supports single-core or dual-core fiber optic cables and can extend the connection distance of Ethernet systems up to 80 km. It is compatible with smart missing link functionality, which automatically disconnects the link on the opposing device's 10/100/1000BASE-T port if the link on one of the 10/100/1000BASE-T ports is severed. The local port supports 10BASE-Te/100BASE-TX/1000BASE-T, allowing direct accommodation of legacy 10BASE-T systems. With optional features, wall mounting is also possible. ■ A wide range of options to choose from based on the type of fiber optic and maximum transmission distance ■ Ultra-compact and lightweight design for easy installation with external power models ■ Reduced power consumption with consideration for the environment *For more details, please refer to the related links or feel free to contact us.*
Operating temperature up to 50℃ - Fast Ethernet Media Converter
The CentreCOM LMC111/LMC112/LMC113 is a media converter that performs conversion between 100BASE-TX and 100BASE-FX. The LMC111/LMC112 supports communication over 2 km with a 2-core multimode fiber, while the LMC113 supports communication over 15 km with a 2-core single-mode fiber. Additionally, compared to the conventional LMC100 series, it features improvements such as an expanded operating temperature range (0 to 50°C), reduced power consumption, and support for Auto MDI/MDI-X functionality. *For more details, please refer to the related links or feel free to contact us.*
Connection distance up to 40km, 100M 1-core SMF repeater type media converter.
The CentreCOM MMC201/MMC202 is a media converter that converts 100BASE-TX twisted pair cable to optical fast Ethernet. The optical fiber cable supports single-mode with one core, allowing for a maximum connection distance of 15 km for a 100 Mbps Ethernet system when used in pairs with MMC201A/201B, and up to 40 km when used in pairs with MMC202A/202B. Additionally, optical fiber cables are less susceptible to noise, making them suitable for environments such as factories and laboratories. *For more details, please refer to the related links or feel free to contact us.*
Operates at temperatures ranging from -10 to 60℃! A product with enhanced Ethernet and fiber optic conversion capabilities.
This product is designed to transparently convert Ethernet networks to fiber networks. In addition to standard features, it is equipped with a link fault pass-through function and has DC 3,000 V surge protection (EFT) against overvoltage, making it suitable for harsh operating environments. Moreover, it supports automatic detection of MDI/MDIX, eliminating the need for crossover cables. 【Features】 ■ RJ45 connector 10/100 Mbps × 1 ■ 100 Mbps multimode/single mode SC connector × 1 ■ Full duplex/Half duplex ■ Store & Forward transmission ■ Auto-negotiation *For more details, please refer to the PDF document or feel free to contact us.
[Moxa] Protected from electrical interference and chemical corrosion! Supports a maximum baud rate of 921.6kbps.
Moxa's "TCF-142 Series" is a media converter equipped with a multi-interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi/single-mode fiber. It features a very convenient function that automatically detects the serial baud rate. It can transmit signals without data loss even if the device's baud rate changes. Additionally, it can set up fiber rings with a total circumference of up to 100 km. 【Features】 ■ Supports ring and point-to-point transmission ■ Extends RS-232/422/485 transmission up to 40 km in single mode (TCF-142-S) and up to 5 km in multi-mode (TCF-142-M) ■ Reduces signal interference ■ Protects against electrical interference and chemical corrosion ■ Supports baud rates of up to 921.6 kbps *For more details, please refer to the PDF document or feel free to contact us.
Supports WDM type fiber modules to reduce the cost of Moxa fiber cables!
Moxa's "CSM-400 Series" consists of slide-in type Ethernet to fiber managed media converters for the NRack System. These modules provide media conversion from 10/100BaseT(X) to 100BaseFX (SC/ST connectors) and can be installed in any NRack System chassis. They support LFP and FEF for easy tracking of network link failures, offer store-and-forward mode and passthrough mode, support 802.3AM OAM for remote management and monitoring, and include WDM type fiber modules to reduce the cost of fiber cables. 【Features】 ■ LFP (Link Fault Pass-through) and FEF (Remote Fault) ■ Two different operating modes: Store & Forward and Passthrough ■ Supports auto-negotiation ■ Supports IEEE 802.3AH OAM protocol ■ Plug and play *For more details, please refer to the PDF materials or feel free to contact us.
