Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 275 items
This is the most standard aluminum body, steel mandrel AC rivet.
This is a cheap commercial-type rivet. It has higher strength than the Avex rivet, but it is not suitable for environments where vibrations occur. There are also longer sizes available, such as 510 and 512.
It is a beautiful all-stainless steel rivet that does not wear out.
This is a rivet that allows for strong bonding with powerful attraction without deforming the thin base material on the back side. It has minimal play and misalignment within the pilot hole, offering excellent seismic resistance, and can be used with sheets as thin as 1.0mm. It retains the same types and bonding plate thickness as the conventional Abinox II.
It is a hex nut that is pressed into thin steel and aluminum base materials.
This is a hexagonal nut that can be press-fitted. It can be attached to thin plates or base materials with small edge distances. It can also be easily attached to aluminum plates that are not suitable for welding. Additionally, the KALEI nut made by POP has a unique shape (neck and groove) in the neck section, providing high installation strength. There is a wide variety compared to similar products from other manufacturers (including M3 and M4 sizes that can be installed on materials with a thickness of less than 1mm, as well as those made of copper alloy). Furthermore, the iron version is also notable for being usable on hard base materials. *For use on base materials with a hardness of Hv300 (HRB105.5) or lower.
This is a TL rivet with a buckling section that expands widely in three directions. It is ideal for fastening soft materials such as resin.
At the time of fastening, the body expands widely in multiple directions, making it suitable for soft materials. It is highly effective in preventing pull-out due to deformation of pilot holes in soft materials and thin sheets.
This is a standard male CD stud. The part number notation varies by manufacturer, but the dimensions and specifications are almost the same.
It is a stud welded using the CD (Capacitor Discharge) method, which allows for easy and instantaneous welding simply by turning on the switch of a dedicated welding gun. There are external thread (male) types and internal thread (female) types available.
This is a flat-head type shield nut with a bag-shaped lower part. When in use, there are constraints on the bolt length (to avoid contact between the nut bottom and the bolt tip).
This is a pop nut with a bag-shaped closed lower part. It is ideal when you want to avoid damaging the inside of the workpiece with the bolt tip. It is also effective in preventing moisture and dust intrusion, as well as wiring tangles.
This is the lightest riveter that can install 3.2mm and 4.0mm rivets. *It is currently discontinued.
This is a tool for brand rivet setting. The long-loved Genesis (G) series and nG series tools have been replaced by the new XT series, which offers sizes XT1 to XT3 for different rivet sizes. The successor to the nG1 tool is the ProSet XT1.
This is a booster separation type tool for speed rivets.
This is a tool for speed riveting. It is a specialized tool for fastening items such as Bribb, Showbart, Rib Screw, and Abtronic. The 7530 model has a separate gun and booster, so during operation, you only need to hold the gun part, making it lightweight and easy to handle.
This is an all-steel type of AC rivet.
This is a cheap commercial-type rivet. It has higher strength than the Avex rivet, but it is not suitable for environments where vibrations occur. There are also longer sizes available, such as 610 and 612.
Blind riveter with long nose piece! Equipped with a vacuum adjustment dial that does not require Joe adjustment.
We would like to introduce our air/hydraulic blind riveter 'SI-715'. It is equipped with a vacuum function and does not require jaw adjustment. It comes with a long nose piece. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Capacity: 2.4φ/3.2φ/4.0φ/4.8φ ■ Stroke: 23.5mm ■ Overall length × height: 290mm × 275mm ■ Weight: 1.55kg ■ Air consumption: 1.8L/rivet *For more details, please refer to the PDF document or feel free to contact us.
Joe does not require adjustment! A blind riveter equipped with a long nose piece and vacuum function.
We would like to introduce our air/hydraulic blind riveter 'SI-725'. It features a vacuum adjustment dial and comes with a long nose piece. No jaw adjustment is required. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Capacity: 4.8φ/6.4φ/7.8φ ■ Stroke: 22.5mm ■ Overall length × height: 305mm × 310mm ■ Weight: 1.88kg ■ Air consumption: 1.8L/rivet *For more details, please refer to the PDF document or feel free to contact us.
Maximum tension value of 20,000N! Cordless with a lithium-ion battery, suitable for any work location.
The 'SI-735' handled by Shinano Kihan Co., Ltd. is a cordless blind riveter equipped with a brushless DC motor. It features an auto-reverse function and a maximum tension value of 20,000N. We offer a variety of nosepieces in sizes 3.2φ, 4.0φ, 4.8φ, and 6.4φ. 【Features】 ■ Built-in LED light ■ Forward/reverse switch button ■ Brushless DC motor ■ Battery level indicator lamp ■ Auto-reverse function *For more details, please refer to the PDF document or feel free to contact us.
Wall connection fittings (for steel, wood, and ALC substrates, 1/2 nut mounting fittings) allow the nut section to rotate freely even when tilted 8° in any direction.
Temporary scaffolding connection fittings for wall-to-wall connections, designed for retrofitting methods, are very convenient as they do not require welding or similar processes. They do not damage wall materials (such as siding) or cause any wear.
Press-fitting stainless steel fasteners into SUS304 plates, which was previously impossible!
It is now possible to produce new weld-free sheet metal from areas that could only be joined by welding.
Press-fitting stainless steel fasteners into SUS304 plates, which was previously impossible!
It is now possible to produce new weld-free sheet metal from areas that could only be joined by welding.
Press-fitting stainless fasteners into SUS304 plates, which was previously impossible!
It is now possible to produce new weld-free sheet metal from areas that could only be joined by welding.
We can accommodate even very small lots! Orders placed by 2 PM will be shipped on the same day! Introduction of nuts.
This is an introduction to the 'nuts' available on the online store "Nuts Super Dot Com" of Yamamoto Tech Co., Ltd. This product can be selected from materials such as iron, brass, stainless steel, aluminum, S45C, titanium, and SUS316L. For iron, you can choose from various surface treatments including raw (uncoated), chromate, nickel, and more. Additionally, surface treatments suitable for each material are available. For details on materials and prices, please refer to "Nuts Super Dot Com." 【Available Materials】 ■ Iron ■ Brass ■ Stainless Steel ■ S45C ■ Titanium ■ SUS316L *For more information, please feel free to contact us.
8MCN-24MCN Coupling Nut Super Tool
Coupling Nut CN COUPLING NUT Super Tool - Material: S45C - Heat Treatment: Quenching HRC30-35 - Finish: Black Oxide
Presentation of the new product catalog: A versatile hardware provider handling everything from housing equipment to facility equipment.
Shibutani's Industrial Equipment Division is an all-rounder in hardware, handling everything from residential equipment to industrial machinery. With a consistent management system from design and engineering to manufacturing, testing, and logistics at our own factory, we can provide high-quality and reasonably priced products starting from a single unit. We also respond promptly to customizations, special orders, and small lot requests that other manufacturers cannot accommodate. We are currently offering a new product introduction catalog as a gift! Please check it out via PDF download. 【New Product Lineup】 ■ 'Floating Nut' that can be easily installed by simply inserting it ■ 'APC Cylinder' that allows for master key configuration ■ 'Damper Bracket' made of stainless steel with excellent corrosion resistance ■ 'Foot Bolt' featuring a slim foot design ■ 'Seismic Latch' achieving an ultra-thin thickness of 10mm *For more details, please refer to the PDF materials or feel free to contact us.
Due to the spring mechanism, it accommodates a wide range of plate thicknesses! Easy-to-install floating nut.
The "EB-1001-M4/M5/M6" is a floating nut that can be easily installed by simply inserting it. It allows for easy installation by just inserting it into a hole that has been drilled. Since tapping is not required, work time can be reduced. The nut can move within a range of 2mm all around, allowing for fine adjustments after temporary fixing. It is compatible with panel thicknesses from 0.5 to 8mm, making it suitable for a wide range of panels. 【Features】 ■ Reduces work time ■ Compatible panel thickness: 0.5mm to 8mm ■ Nut can move within a range of 2mm all around ■ Compliant with RoHS directives ■ Easily joins two panels *For more details, please refer to the PDF document or feel free to contact us.
The corresponding plate thickness is 0.5 to 8 mm, making it suitable for a wide range of panels! *Limited time 20% OFF campaign ongoing!
The "Floating Nut EB-1001-M4/M5/M6" allows for easy installation by simply inserting it into a pre-drilled round hole. Since tapping is not required, work time can be reduced. 【Features】 ■ Due to its spring mechanism, it accommodates a wide range of plate thicknesses from 0.5mm to 8mm. ■ The nut can move within a 2mm range all around, allowing for fine adjustments after temporary fixing. ■ Compliant with RoHS directives. ============================ *Limited-time campaign ongoing!* Content: 20% OFF the design price Period: Until noon on December 27, 2018 (Thursday) ============================
High-performance closed-end type! Excellent water tightness between the base material and the rivet.
We handle the "Shield Valve Rivet" manufactured by Robutex Fastening Systems Co., Ltd. Since the backside of the base material buckles and fixes, the joint strength in the tensile direction is dramatically increased, making it particularly suitable for cases where the backside base material is soft or thin. Application examples include various electronic device enclosures, various residential joints, and solar panels. 【Features】 ■ Provides higher clamping force compared to standard closed-end types ■ Excellent water tightness between the base material and the rivet ■ The backside of the base material (the buckling side) buckles and fixes ■ Dramatically increases joint strength in the tensile direction ■ Suitable for cases where the backside base material is soft or thin *For more details, please refer to the PDF materials or feel free to contact us.
Innovation with precision knurling! Advance Industry's insert nuts - high quality × efficiency is our essence.
This photo product is made by processing an iris knurl on a CNC automatic lathe. Of course, it is processed from knurling material, but by performing the knurling process within the CNC automatic lathe, the potential for cost advantages increases. Regarding the insert (knurled) nuts, there are both through-threaded and stop-hole types. We have a track record with materials such as brass C3604, stainless steel SUS303, and aluminum A2017, among others.
Equipped with a 6-stage parts former from Nut Former, it is capable of forging not only nuts but also long bolts and precision parts.
Our company has actively taken on products with shapes and dimensions that are theoretically difficult to process, making mass production possible. We accumulate technology and continuously strive for improvement.
The bolt is equipped with a high-quality anti-loosening feature.
The "Fuji Rock Bolt Type N" is a locking bolt equipped with a high-quality anti-loosening function. Even in areas where using a nut is difficult, this product allows for secure tightening operations. 【Features】 ■ Equipped with a high-quality anti-loosening function ■ Exhibits both anti-loosening and sealing effects ■ Simplifies tightening operations and prevents installation errors *For more details, please refer to the PDF document or feel free to contact us.
Introducing the convenient FINE U-NUT/M10 to M50 dedicated tightening tool set.
The "FINE-U NUT TOOLSET 00-10" is a dedicated tightening tool set for FINE U-NUTs from M10 to M50. This tool set includes a socket and ratchet handle for fastening the "FINE U-NUT," which allows for arbitrary and appropriate positioning. We also offer dedicated tightening tools for FINE U-NUTs from M55 to M100. *For more details, please refer to the PDF document or feel free to contact us.*
The U-NUT coated with stainless steel and hot-dip galvanized zinc is used for the installation anchors of soundproof panels and the mounting brackets for soundproof panels on the New Meishin Expressway.
The U-NUT, synonymous with locking nuts, continues to evolve not only in its anti-loosening performance but also in durability and vibration resistance. Here are some examples of where the U-NUT locking nut has been implemented. 【Case Overview】 ■ Adoption Location - Shin-Meishin Soundproof Panels (Support Installation Anchors and Soundproof Panel Mounting Hardware) ■ Adopted Products - Clip U-Nut (Stainless Steel) / HEX U-Nut (Stainless Steel, Hot-Dip Galvanized) ■ Reasons for Adoption - Anti-loosening function, proven track record, on-site construction management/safety management, and fall prevention measures ■ Other Features - Performance results of the anti-loosening function can be verified according to NEXCO construction management guidelines. *For more details, please refer to the PDF document or feel free to contact us.
【Free samples available!】You can see various nuts in person! Contact us now!
【Free samples available!】 Air leakage, vibration reduction, shock absorption, and noise prevention. You can see various types of nuts in person! Please feel free to contact us for more details. Rubber nuts have the same functions as regular nuts and feature air leakage prevention, vibration reduction, shock absorption, and noise prevention at the joints during assembly. Metal insert nuts allow for easy work as an alternative to welding, tapping screws, and bolts/nuts, and they can be set up without damaging the surface of the object. Nylon kits are ideal for reducing noise and vibration, making them suitable for metals, fiberglass, plastics, and more. They can also be reused. While metal insert kits require special nut tools, rubber nuts and nylon nuts do not require special installation tools and can be riveted to steel plates.
(NT-00001) Nut M0.8
Order number: TN-00001 Screw diameter: 0.8 mm Square nut M0.8
(TN-00005) Square Nut M0.8
Order number: TN-00005 Screw hole diameter: 0.8 mm Shape: Square nut
