We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Passive Sensors.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Passive Sensors Product List and Ranking from 4 Manufacturers, Suppliers and Companies | IPROS GMS

Passive Sensors Product List

31～60 item / All 64 items

Displayed results
Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor and indoor passive sensor that significantly reduces missed reports and malfunctions with its unique triple mirror system and signal processing method.

■Triple mirror sensor that forms a unique area Equipped with three sets of optical unit systems. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical unit systems significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles an outdoor light and incorporates internal area adjustment (movable mirrors), making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of malfunctions caused by small animals By adopting independent detection units for each mirror, signal processing reduces malfunctions caused by small animals such as cats. Furthermore, by using the pet mode (only for three-dimensional monitoring), it can also cancel out medium-sized dogs (approximately 50 cm in height), allowing for operation in homes with pets. Additionally, by attaching a bird stopper to the top, it becomes harder for birds to perch, significantly reducing unexpected malfunctions.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor MS-12T-N

Outdoor/Indoor Passive Sensor MS-12T-N

Reduced false alarms through AND detection in two directions: horizontal area and downward area! This enables more stable security outdoors.

■ Adoption of 2-direction AND detection for horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect something, which reduces false triggers caused by small animals like dogs and cats, as well as false triggers due to excessive detection area extension, enabling more stable security outdoors. ■ Outdoor installation possible It has a rainproof structure, allowing for outdoor installation. It can be mounted on walls and poles, so it does not limit installation locations. (Additional mounting brackets are required for pole installation.) ■ Day/night discrimination function Equipped with a day/night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Adjustable from approximately 10lx to infinity) ■ Sensitivity adjustment volume It has a built-in sensitivity adjustment volume that allows for fine-tuning of sensitivity according to the installation environment, application, and operating conditions. The sensitivity for detecting human bodies can be adjusted within a range of approximately 30% to 170%. ■ Convenient features and user-friendly design ● The power supply voltage ranges from 10.5 to 30V (no polarity). ● It has a count switching function that allows for changing the number of sensor counts (1 time/3 times). ● There is a tamper output on the main unit. ● It includes an operation indicator light for convenient operation confirmation (red LED).

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor passive sensor with freely adjustable angles.

■Can be installed outdoors and semi-outdoors Due to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, allowing for flexible installation locations. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, enabling a neat installation. ■Fits well with exteriors With a novel design that has never been seen before, it perfectly fits into exterior coordination. Its smart design matches well in various locations, whether indoors or outdoors. ■Supports simple outdoor security This passive sensor can meet the needs for simple security in places where near-infrared beam sensors cannot be installed or where exterior design is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can now be adjusted up and down, left and right with just one touch. ■User-friendly design ● Equipped with an operation indicator lamp for convenient operation confirmation. (Lights up when detecting) ● Three types of options for flexible installation. ● Wide detection area (three-dimensional detection type 15m x 15m, linear detection type 30m)

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twin mirror type passive sensor, three-dimensional surveillance type, PA-6612W

Twin mirror type passive sensor, three-dimensional surveillance type, PA-6612W

This is a new type of passive sensor that significantly reduces the impact of small animals through a twin mirror system that forms a unique alert area.

■Wide Base Design By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Twin Mirror Configuring a Unique Area This is a new type of passive sensor that incorporates two sets of optical units, each equipped with twin-type elements. The area formed by the two sets of optical units maintains an optimal positional relationship according to the alert distance, regardless of the set distance, thanks to its unique mechanical design, significantly reducing false alarms caused by small animals. ■Micro-Motion Detection Function Equipped with a function that can sensitively detect even slight movements of a person. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert period through the flashing and lighting of the memory indicator (yellow). ● The memory indicator flashes for 3 minutes after the alarm, then continues to light for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type for 12m PA-5312A

Passive Sensor 3D Surveillance Type for 12m PA-5312A

A passive sensor that adopts fuzzy theory and is equipped with abundant safety features and micro-movement detection capabilities.

■Adoption of Fuzzy Theory The two outputs from the dual twin sensor are processed by a newly developed CPU, separating the temperature difference information between the detection object and the background, as well as the size information of the detection object. Using fuzzy theory, it makes a highly accurate judgment on whether the detection object is a human or a small animal, and outputs an alarm. ■Compact and High Performance A compact and soft design that matches well with interior decor. With a newly designed high-sensitivity dual twin sensor, optical system, and signal processing circuit, it has achieved an even denser surveillance area. ■Micro-Movement Detection Function By switching the mode selector, the dual twin sensor operates as two independent twin sensors. The number of sensitive zones doubles (from 18 pairs to 36 pairs), transforming it into a highly sensitive micro-movement detection sensor that can detect even slight movements of the human body or limbs. ■Abnormality Display Function Alarm Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during surveillance through the blinking or lighting of the memory display lamp (yellow). ■Abnormality Alarm Function It notifies of abnormalities through continuous alarm output and continuous lighting of the alarm display lamp.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type PA-6820WA

Passive Sensor Surface Surveillance Type PA-6820WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through a trouble alarm output and the illumination of the trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. * Transparent sprays or items with low near-infrared reflectivity may not be detectable. ■Wide Base Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the flashing and illumination of the memory indicator light (yellow) during the alert state. ● The memory indicator light will flash for 3 minutes after the alarm is triggered, then continue to illuminate for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805WA

Passive Sensor Spot Surveillance Type PA-6805WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● Transparent sprays or items with low near-infrared reflectivity may not be detected. ■Wide Base Design ● By widening the base (Φ150mm) compared to conventional designs, the issue of noticeable dirt marks on the ceiling surface during sensor replacement has been resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the flashing and illumination of the memory indicator light (yellow). ● The memory indicator light will flash for 3 minutes after the alarm is triggered, then continue to illuminate for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Round Surveillance Type PA-6810W

Passive Sensor Round Surveillance Type PA-6810W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) blinking or lighting up during the alert. ● The memory indicator light blinks for 3 minutes after the alarm, then continues to light up for 47 minutes before automatically turning off. ● The function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched to contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6810B(BL)

Passive Sensor PA-6810B(BL)

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7–30V. Enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renewals as well. ■Black Color Available for All Warning Models We have introduced a black version that considers harmony with ceilings in temples, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Additionally, the visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Our unique optical technology creates a sharp warning area, providing effective detection performance regardless of area settings, using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6805B(BL)

Passive Sensor PA-6805B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7-30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. Black color lineup for all warning-type models We have introduced a black version that considers harmony with the ceilings of temples, shrines, museums/art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to those of the white version. Unique Warning Area Configuration Thanks to our unique optical technology that creates a sharp warning area, effective detection performance is achieved regardless of area settings, using a movable mirror. Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type PA-6820B

Passive Sensor Surface Surveillance Type PA-6820B

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies, leading to cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Enables selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. ■Black Color Available for All Warning Type Models We have introduced a black version that considers harmony with ceilings in temples, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Additionally, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Warning Area Configuration Our unique optical technology creates a sharp warning area, providing effective detection performance regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6820B(BL)

Passive Sensor PA-6820B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7-30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Also suitable for renovations. ■Black Color Available for All Caution Type Models We have introduced a black version that considers harmony with the ceilings of temples, shrines, museums/art galleries, and stores. This allows the sensor to blend into the background and not stand out (does not compromise aesthetics). Additionally, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Caution Area Configuration Thanks to our unique optical technology that creates a sharp caution area, it demonstrates effective detection performance regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6806B

Passive Sensor Spot Surveillance Type PA-6806B

Energy-saving and compact design. The three-dimensional warning type also comes in black! A basic passive sensor with a single mirror type.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renewals as well. ■Black Color Available for All Warning Type Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Thanks to our unique optical technology that creates sharp warning areas, effective detection performance is achieved regardless of area settings using movable mirrors. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for one-touch operation, making the work smooth and efficient.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type for 45m PA-5045F

Passive Sensor Surface Surveillance Type for 45m PA-5045F

Wide-area surveillance passive sensor that controls various functions with a CPU.

■Dual Twin Element + CPU The CPU intelligently controls detection functions, alarm memory functions, and more. ■Ideal for Use Under Harsh Installation Conditions Even in the presence of phenomena that are likely to cause malfunctions, such as small animals (mice, dogs, cats, etc.), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■ASC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. No sensitivity adjustments are needed for each season. ■Reliable Design Resistant to Radio Interference By adopting a unique N.E. method (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Easy Area Setting The sensor unit features an area selector and area setting chart on the back, making it easy to set the surveillance area. ■Trustworthy and User-Friendly Design ● Includes a walk test switch for convenient operation verification. ● Features a sight area adjustment mechanism that allows visual confirmation of the area. ● Equipped with an auto-return function that automatically switches from sight adjustment mode to surveillance mode.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Long Area PA-9340

Passive Sensor Long Area PA-9340

Slim and compact wall-mounted passive sensor

■Slim and Compact This sensor is slim and compact, making it unobtrusive even when mounted on walls or pillars. ■Wide Variation The alert area comes in two types: wide area and long area, allowing for flexible use as needed. ■Adoption of Twin Elements The thermal elements, which are essential to the sensor's functionality, are equipped with a twin type, and their stable performance has already been proven. ■Operation Indicator Light (Red LED) You can check the operating status with the indicator light (red LED). There is also a convenient feature that allows it to be turned off during alert mode. ■Easy Maintenance It is set to the appropriate sensitivity, so no troublesome sensitivity adjustments are necessary. Additionally, you can monitor the sensitivity level with a check pin for easy maintenance. ■Tamper Switch It is set to the appropriate sensitivity, so no troublesome sensitivity adjustments are necessary. Additionally, you can monitor the sensitivity level with a check pin for easy maintenance.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor MS-12F-N

Outdoor/Indoor Passive Sensor MS-12F-N

Reduced false alarms through AND detection in two directions: horizontal area and downward area! This enables more stable security outdoors.

■Features This is a passive sensor that detects thermal radiation emitted from the human body and outputs relay contact signals, suitable for both indoor and outdoor use. ■Adoption of 2-direction AND detection for horizontal and downward areas The detection method outputs a detection signal only when both the horizontal area and downward area are detected, reducing false triggers caused by small animals like dogs and cats, as well as false triggers due to excessive detection areas, enabling more stable security outdoors. ■180° horizontal surveillance area with two sensors in upper and lower positions With two sensors positioned above and below, it is possible to monitor a horizontal area of 180°. Additionally, the detection method allows for the selection of AND detection or OR detection between the upper and lower sensors. ■Window surveillance possible through area adjustment By adjusting the area with the included area mask sheet, it is possible to monitor windows. The MS-12F-N can monitor windows on both sides by installing one unit at the center, utilizing the two sensors in the upper and lower positions. ■Outdoor installation possible Due to its rainproof structure, it can be installed outdoors. It can be mounted on walls and poles, allowing for flexible installation locations. (Additional mounting brackets are required for pole installation.)

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/indoor passive sensor, line detection type, for 30m, PA-30N

Outdoor/indoor passive sensor, line detection type, for 30m, PA-30N

Outdoor passive sensor with adjustable angles for free positioning.

■Can be installed outdoors and semi-outdoors Due to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, or poles, allowing for flexible installation locations. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, enabling a neat installation. ■Fits into exteriors Thanks to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Furthermore, it can be mounted on ceilings, walls, or poles, providing flexibility in installation locations. The pitch of the mounting base is also compatible with commercially available embedded boxes for a tidy installation. ■Supports simple outdoor security This passive sensor can meet the simple security needs in locations where near-infrared beam sensors cannot be installed or where the design of the exterior is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can now be adjusted up and down, as well as left and right, with just one touch.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Intelligent Passive Sensor PA-IN-5625

Intelligent Passive Sensor PA-IN-5625

Improved small animal identification performance with a twin mirror method and fuzzy processing double approach.

■Twin Mirror Method and Fuzzy Processing Method The sensor is equipped with two sets of optical units and dual twin elements + twin elements (PA-IN-5605 has twin elements x2). The area composed of these optical units maintains an optimal positional relationship according to the warning distance, regardless of the set distance, significantly reducing false alarms caused by small animals due to its unique mechanical design. Additionally, our proprietary fuzzy processing calculates the detection signals with the CPU to appropriately determine whether it is an intruder or a small animal. ■Compatible with Ceiling and Wall Installation ● You can select a model suitable for the installation location. ● It can be installed on either the ceiling or wall (the spot warning type is exclusively for ceiling mounting). There is also an attachment for embedded installation (BU-5600). The warning methods include three types: three-dimensional, surface, and spot types. You can choose a model suitable for the installation location. ■Rich Features ● Equipped with an external force alarm function that can quickly detect malicious masking or other interference aimed at the cover. ● Self-diagnosis function and equipment anomaly monitoring that monitors the elements and surrounding circuits. ● Tamper function that monitors improper attachment or opening and closing of the cover.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T35N(BL)

Outdoor/Indoor Passive Sensor PIR-T35N(BL)

A passive sensor for outdoor and indoor use that significantly reduces missed reports and malfunctions with its unique triple mirror system and signal processing method.

■Triple mirror that forms a unique area Equipped with three sets of optical units built into the sensor. This is a new type of passive sensor featuring twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the structure allows for a design similar to outdoor lights and internal area adjustments (movable mirrors), making it difficult to infer the direction of the area from the appearance, thus enhancing security. ■Reduction of malfunctions caused by small animals By adopting independent detection units for each mirror, signal processing reduces malfunctions caused by small animals such as cats. Moreover, by using the pet mode (only for three-dimensional vigilance type), it can also cancel out medium-sized dogs (approximately 50 cm in height), allowing for operation in homes with pets. Furthermore, by installing a bird stopper on the top surface, it becomes difficult for birds to perch, significantly reducing unexpected malfunctions. ■Supports installation heights of 2.0 to 6.0 meters! Since it can be installed at a height that is not easily accessible to people, it prevents acts of vandalism against the sensor.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor MS-100(BL)

Outdoor/Indoor Passive Sensor MS-100(BL)

Indoor and outdoor motion sensor switch. Select from four detection patterns in a variable multi-area!

■Adoption of Variable Multi-Area By combining variable multi-area with extensive adjustment functions, it allows for the selection of various mounting locations and four types of detection patterns with a single unit. ■As a switch for lighting and surveillance cameras It can be used for turning indoor and outdoor lighting on and off as an energy-saving and convenient lighting solution, and simultaneously serves as a switch to activate surveillance cameras. 【No-voltage relay contact output (a contact) + no-voltage relay contact output (a contact/b contact switching)】 ■All-weather switch With a rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, poles, etc., allowing for flexible installation locations. *The rainproof structure is only applicable when mounted vertically: equivalent to IP43. When mounted horizontally, it is not rainproof.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Round Surveillance Type PA-6810WA

Passive Sensor Round Surveillance Type PA-6810WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● Transparent sprays or items with low near-infrared reflectivity may not be detectable. ■Wide Base Design ● By widening the base part (Φ150mm) compared to conventional designs, the issue of noticeable dirt marks on the ceiling surface during sensor replacement has been resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the blinking and illumination of the memory indicator light (yellow). ● The memory indicator light blinks for 3 minutes after the alarm is triggered, then continues to illuminate for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type PA-6820W

Passive Sensor Surface Surveillance Type PA-6820W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base part (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) blinking or lighting up during the alert state. ● The memory indicator light blinks for 3 minutes after the alarm, then continues to light up for 47 minutes before automatically turning off. ● The function can be disabled using the mode selector. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up) ● Attachment: Wall mounting is also possible with BL-5000, BCW-401 (sold separately).

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805W

Passive Sensor Spot Surveillance Type PA-6805W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) flashing or lighting up during the alert state. ● The memory indicator light flashes for 3 minutes after the alarm, then continues to light up for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Round Surveillance Type PA-6810B

Passive Sensor Round Surveillance Type PA-6810B

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. This allows for the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. It enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. It is also suitable for renovations. ■Black Color Available for All Warning Type Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). The visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Thanks to our unique optical technology that creates a sharp warning area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805B

Passive Sensor Spot Surveillance Type PA-6805B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) The current consumption is reduced to about one-third (8mA) compared to our conventional products. This allows for the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) The operating voltage is DC 7 to 30V. This enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. It is also suitable for renovations. ■Black Color Available for All Caution-type Models We have introduced a black version that considers harmony with the ceilings of temples, museums/art galleries, stores, etc. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Caution Area Configuration Thanks to our unique optical technology that creates a sharp caution area, effective detection performance is achieved regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6806B(BL)

Passive Sensor PA-6806B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to approximately one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC7-30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. ■Black Color Available for All Warning Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums/art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Warning Area Configuration Our unique optical technology creates a sharp warning area, providing effective detection performance regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type for 20m PA-6720

Passive Sensor Surface Surveillance Type for 20m PA-6720

Standard passive sensor equipped with an auto-reset memory function.

■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during standby by the blinking and lighting of the memory indicator light (yellow). ● The memory indicator light blinks for 3 minutes after the alarm is triggered, then continues to stay lit for 47 minutes before automatically turning off. ● The function can be disabled using the mode selector. ■Easy Sensitivity Adjustment Function Sensitivity settings can be adjusted in four levels by switching the mode selector. This allows for optimal security based on the installation location. ● Adjustment range: 60%・80%・100%・120% ■Device Abnormality Alarm Function In the event of damage or disconnection in the internal circuit or connection parts of the sensor, the system will notify you of the abnormality through continuous alarm output and continuous lighting of the alarm indicator light. ■Reliable Design Resistant to Radio Interference Effective measures have been taken in circuit and mechanical design to counteract electrical noise from the line and airborne noise. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-altitude installation passive sensor, surface surveillance type, PA-8420

High-altitude installation passive sensor, surface surveillance type, PA-8420

Due to its unique high-density surveillance area, it can be installed in high places such as atriums and lobbies.

■Unique surveillance area capable of high-altitude installation This sensor can monitor from high altitudes, which was difficult with conventional sensors. Its unique high-density surveillance area allows for installation at heights of 4m to 8m. The high-density surveillance area, composed of four reflective mirrors, can be used in locations with high ceilings, such as atriums and event spaces, as well as under eaves in truck yards. ■Installable indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables surveillance even in locations where near-infrared beam sensors cannot be installed. ■Robust housing case Adopting an AES resin housing case, it has improved impact resistance and weather resistance. The risk of damage is relatively low even in places like gyms where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, its excellent weather-resistant sealing structure prevents water intrusion. (When using exposed wiring, please use the included waterproof bushing or conduit for wiring.)

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive sensors ideal for spot surveillance at entrances, exits, and pathways.

■ Two types: surface-mounted and recessed This is a sensor installed on the ceiling surface of entrances and corridors to detect intruders. We offer two models: surface-mounted and recessed, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■ Intrusion area adjustment function The width of the monitored area can be adjusted with a single touch according to the location being monitored. Wide: 2.8m at a height of 3.5m Narrow: 1.4m at a height of 3.5m. Additionally, the area angle can be adjusted from 3° to 30° in 10 steps (vertical angle from -10° to +20°). ■ Sensitivity adjustment volume The sensor is factory-set to the appropriate sensitivity, but it also includes a "sensitivity adjustment volume" that allows for fine-tuning based on installation conditions.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive sensors ideal for spot surveillance at entrances, exits, and corridors.

■Two types: ceiling-mounted and recessed This is a sensor installed on the ceiling surface of entrances and corridors to detect intruders. We offer two models: ceiling-mounted and recessed, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■Intrusion area adjustment function The width of the monitored area can be adjusted with a single touch according to the location being monitored. Wide: 2.8m at a height of 3.5m Narrow: 1.4m at a height of 3.5m. Additionally, the area angle can be adjusted up to 30° in 10 steps (vertical angle from -10° to +20°). ■Sensitivity adjustment volume The device is factory-set to the appropriate sensitivity, but it includes a built-in "sensitivity adjustment volume" that allows for fine-tuning based on installation conditions.

  • Other security and surveillance systems
  • Passive Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Passive Sensors

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.