We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Powder coatings.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Powder coatings×ナトコ - List of Manufacturers, Suppliers, Companies and Products

Powder coatings Product List

1～15 item / All 21 items

Displayed results
Powder Coating "Econa 51F"

Powder Coating "Econa 51F"

Low-temperature curing, non-fuming, matte type outdoor powder coating.

"Ekona 51F" is a powder coating that can accommodate materials that are difficult to bake at high temperatures, such as cast iron, due to its excellent low-temperature curing properties. It allows for a smooth, matte finish. The baking time is reduced to half compared to conventional powder coatings, with 20 minutes at 160°C and 10 minutes at 180°C. Additionally, there is no contamination of the baking and drying oven from resin, which can lead to reduced maintenance costs. 【Features】 ■ Excellent low-temperature curing ■ Significantly reduced baking time ■ Environmentally friendly (fuel consumption reduction, no VOCs, etc.) ■ No resin/odor during baking ■ Smooth, matte finish ■ Flexible service support (custom colors in small quantities and short delivery times) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 52A/D"

Powder Coating "Econa 52A/D"

Polyester/urethane main component - high smoothness type outdoor powder coating

"Ekona 52A/D" is a powder coating that excels in smoothness and allows for a thin film finish. With a gloss retention rate of 70% after 500 hours using a xenon lamp and passing the salt spray test for over 500 hours, it is suitable for a wide range of indoor and outdoor applications. Additionally, it does not use VOCs (volatile organic compounds) and can reduce substances subject to the PRTR law. 【Features】 ■ Main components: Polyester/urethane; high smoothness type ■ Excellent smoothness, capable of thin film finishing ■ Good coating performance in terms of weather resistance and corrosion resistance ■ Environmentally friendly (no VOCs, etc.) ■ Flexible service support (short delivery times, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 52E"

Powder Coating "Econa 52E"

Polyester/urethane main component, high weather resistance type outdoor powder coating.

"Ekona 52E" is a powder coating that excels in weather resistance and is suitable for long-term outdoor use. It maintains a gloss retention rate of 70% after 1,500 hours of exposure to xenon lamp light, showing minimal discoloration or gloss reduction even after prolonged outdoor exposure. It has passed the salt spray test for over 500 hours, demonstrating not only excellent weather resistance but also good coating performance in terms of corrosion resistance. 【Features】 ■ Polyester/urethane main component; high weather resistance type ■ Exceptional weather resistance, suitable for long-term outdoor use ■ Good coating performance in terms of corrosion resistance ■ Environmentally friendly (no VOCs used, etc.) ■ Flexible service support (custom colors from small quantities, short delivery times) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 52M"

Powder Coating "Econa 52M"

Polyester/urethane main component - metallic silver powder coating.

"Ekona 52M" is a silver metallic powder coating rich in metallic feel. By simply applying it uniformly within the standard film thickness range (70-90μm), it finishes beautifully. It does not cause repulsion with other coatings and can be used in conjunction with other coatings in the same work area. Metallic finishes are made to order in coarse and medium textures. 【Features】 ■ Main components: Polyester/Urethane ■ Rich metallic feel, silver metallic ■ Good film performance in terms of weather resistance and corrosion resistance ■ No repulsion with other coatings ■ Environmentally friendly (no VOCs used, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 53B"

Powder Coating "Econa 53B"

Double environmental performance with powder coating and low-temperature curing! Epoxy polyester type suitable for indoor use.

"Ekona 53B" is a powder coating that can accommodate materials that are difficult to bake at high temperatures, such as cast iron, due to its excellent low-temperature curing properties. It reduces the baking time to half compared to conventional powder coatings, with 20 minutes at 140°C and 10 minutes at 180°C, while exhibiting good smoothness. Additionally, it allows for approximately 20-30% reduction in fuel consumption and CO2 emissions compared to typical powder coatings. 【Features】 ■ Excellent low-temperature curing ■ Significantly reduced baking time ■ Environmentally friendly (fuel consumption reduction, VOC-free, etc.) ■ Good smoothness ■ Flexible service support (custom colors from small quantities, short delivery times) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 53F/G"

Powder Coating "Econa 53F/G"

Epoxy/Polyester main component, matte type indoor powder coating.

"Ekona 53F/G" is a powder coating that allows for a uniform and smooth finish. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion to various materials and corrosion resistance, is excellent, making it suitable for indoor decorative finishes such as steel furniture. Additionally, it does not use VOCs (volatile organic compounds), allowing for a reduction in substances subject to PRTR law management. 【Features】 - Epoxy/Polyester main component; matte type - Capable of achieving a uniform and smooth finish - Excellent coating performance in terms of adhesion to various materials and corrosion resistance - Environmentally friendly (no VOCs, etc.) - Flexible service support (short delivery times, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 53J"

Powder Coating "Econa 53J"

Design powder coating - matte leather-like indoor powder coating.

"Ekona 53J" is a powder coating that allows for a leather-like matte textured pattern simply by applying it uniformly within the standard film thickness range. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion and corrosion resistance to various materials, is excellent, making it suitable for indoor decorative finishes. Additionally, it is free of VOCs (volatile organic compounds) and can reduce substances subject to PRTR (Pollutant Release and Transfer Register) regulations. 【Features】 ■ Epoxy polyester type with a matte leather finish ■ Uniform textured pattern with one coat and one bake ■ Excellent coating performance in adhesion and corrosion resistance to various materials ■ Non-silicone, no beading ■ Environmentally friendly (VOC-free, etc.) ■ Flexible service support (custom colors available from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 53L"

Powder Coating "Econa 53L"

Decorative powder coatings and fine leather-like indoor powder coatings.

"Ekona 53L" is a powder coating that achieves a soft leather pattern simply by being applied uniformly, without the need for special techniques. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion and corrosion resistance on various materials, is excellent, making it suitable for indoor decorative finishes. Being silicone-free and non-repellent, it can be used alongside other paints in the same work area. 【Features】 ■ Epoxy polyester type, fine leather texture ■ Uniform surface texture with one coat and one bake ■ Excellent coating performance, including adhesion and corrosion resistance on various materials ■ Silicone-free and non-repellent ■ Environmentally friendly (no VOCs, etc.) ■ Flexible service support (can accommodate specified colors from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 53N"

Powder Coating "Econa 53N"

Double environmental performance with powder coating and low-temperature curing! Epoxy polyester type for indoor use.

"Econa 53N" is a powder coating that can accommodate materials that are difficult to bake at high temperatures, such as cast iron, due to its excellent low-temperature curing properties. The baking time is reduced to half compared to conventional powder coatings, with 20 minutes at 150°C and 10 minutes at 180°C. It exhibits good smoothness. Additionally, compared to typical powder coatings, it can achieve approximately 20-30% reduction in fuel consumption and CO2 emissions. 【Features】 ■ Epoxy polyester type ■ Excellent low-temperature curing properties ■ Significantly reduced baking time ■ Environmentally friendly (fuel consumption reduction, VOC-free, etc.) ■ Good smoothness ■ Flexible service support (accommodates a wide range of gloss specifications, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 55A"

Powder Coating "Econa 55A"

Polyester/urethane main component; high smoothness, thin film type powder coating.

"Ekona 55A" is a powder coating that excels in concealment, gloss, vividness, and smoothness with a thin film of 30μm. It forms a very smooth coating and allows for thin film application, significantly reducing the amount of paint used compared to conventional coatings. Additionally, it has no blurriness compared to traditional polyester powder coatings. With a gloss retention rate of 70% after 500 hours under a xenon lamp and passing the salt spray test for over 500 hours, its coating performance makes it suitable for a wide range of indoor and outdoor applications. 【Features】 ■ Main components: Polyester/Urethane ■ Excellent concealment, gloss, vividness, and smoothness with a 30μm thin film ■ Good coating performance in weather resistance and corrosion resistance ■ Environmentally friendly (no VOCs used, etc.) ■ Flexible service support (can accommodate specified jobs from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 56A"

Powder Coating "Econa 56A"

Excellent paintability! High smoothness and thin film type indoor powder coating.

"Ekona 56A" is a powder coating that excels in smoothness and hiding power, allowing for a thin film finish. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion to various materials and corrosion resistance, is excellent, making it suitable for indoor decorative finishes. Additionally, it is non-particle type, with no decrease in the ability to cover recessed areas, eliminating the need for correction work. It can be used with both corona electrostatic and tribo-electrostatic systems. 【Features】 ■ Epoxy polyester type ■ Excellent smoothness and hiding power, allowing for a thin film finish ■ Good coating performance, including adhesion to various materials and corrosion resistance ■ Good paint workability ■ Environmentally friendly (no VOCs used, etc.) ■ Flexible service support (can accommodate specified colors from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 52I" Cutting Oil Resistant Type

Powder Coating "Econa 52I" Cutting Oil Resistant Type

Due to its excellent cutting oil properties, it is suitable for metal products such as machine tools and automotive parts! Main components are polyester and urethane.

The "Econa 52 Series" is a powder coating with excellent cut oil resistance, primarily composed of polyester and urethane. It allows for changes in gloss and design while maintaining performance. 【Features】 ■ Excellent corrosion resistance (from sheet metal to castings) ■ Free of VOCs, contributing to the reduction of substances managed under the PRTR law ■ Supports various colors, gloss levels, and patterns *For more details, please contact us or download the PDF.

  • Repair Agent
  • paint
  • Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High weather resistance and corrosion resistance! Cutting oil-resistant polyester powder coating.

High weather resistance and corrosion resistance! Cutting oil-resistant polyester powder coating.

Functional powder coatings that demonstrate significant effects on cutting oils! The 'Econa' series of powder coatings can be uniformly applied even to edge areas.

Our popular product line, the "Econa Series" of powder coatings, features polyester/urethane-based powder coatings that provide functionality (such as resistance to cutting oils and high corrosion resistance)! They demonstrate excellent effectiveness in protecting and maintaining the aesthetics of metal products used around machine tools, road materials, distribution boards, and outdoors. [Introducing each functional powder coating in the Econa Series!] [For high cutting oil resistance...] ⇒ Econa 52I ▶ Maintains high corrosion resistance from sheet metal to castings ▶ Pattern compatibility is also available as needed [For high weather resistance and high corrosion resistance...] ⇒ Econa 52Q ▶ Reduces processes and costs with a single coat ▶ High corrosion resistance and high weather resistance suitable for outdoor applications ▶ Free from VOCs (volatile organic compounds) [For edge cover areas...] ⇒ Econa 51C・H, Econa 52C・H ▶ Exhibits excellent edge rust prevention ▶ Superior salt damage corrosion resistance *For more details, please refer to the catalog in PDF format or feel free to contact us. *We can also flexibly accommodate gloss, matte, and patterning requests.

  • Other polymer materials
  • paint
  • Rust Inhibitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa 51E"

Powder Coating "Econa 51E"

Superior weather resistance surpassing acrylic powder! Low-temperature curing at 160° for 20 minutes reduces fuel consumption! This is an outdoor powder coating that cures at low temperatures and is non-fume type.

"Ekona 51E" is a polyester powder coating that achieves high weather resistance with low-temperature curing. [Features] - Weather resistance surpassing that of acrylic powders - Gloss retention rate of 80% after 1500 hours in a Sunshine Weatherometer - Low-temperature curing coating - Significant reduction of harmful substances like tin - Measures against resin during curing - Custom colors available in small quantities - Short delivery time requests can also be discussed *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Coating "Econa High Edge Cover Type"

Powder Coating "Econa High Edge Cover Type"

By ensuring the film thickness at the edge, corrosion resistance is improved! High edge cover performance is provided while maintaining the performance of "Econa."

The "Econa High Edge Cover Type" ensures a thicker film at the edges compared to conventional products, demonstrating high corrosion resistance against metals. This type maintains the performance of various Econa products while providing enhanced high edge cover performance. 【Features】 ■ Cost reduction ■ Excellent rust prevention ■ Less tendency to drip even with high film thickness *For more details, please download the PDF or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Powder coatings

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.