High voltage probe
This is a probe ideal for high voltage measurement.
DC 10kV to 200kV, and a new dedicated model for 13.56MHz measurement has also been added to the lineup.
- 企業:栗田製作所 本社・京都事業部
- 価格:Other
更新日: 集計期間:Sep 03, 2025~Sep 30, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日: 集計期間:Sep 03, 2025~Sep 30, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日: 集計期間:Sep 03, 2025~Sep 30, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
61~75 件を表示 / 全 142 件
This is a probe ideal for high voltage measurement.
DC 10kV to 200kV, and a new dedicated model for 13.56MHz measurement has also been added to the lineup.
High voltage up to 100kV, high frequency of 100MHz, long cables up to 30m.
We can observe high-voltage, high-frequency waveforms from devices such as circuit breakers, transformers, and inverters, and we also have long cables available.
400W AC adapter, large output but small size switching adapter.
Are you looking for a high-output AC adapter? It is a 400W external power supply. The output is DC12V31.66A or DC24V16.66A, among others. While the output is high, the body size is compact, making it a new type of AC adapter. It complies with international safety certifications such as IEC62368-1 and medical standard 60601-1. Please feel free to consult us about the desired output plug and your specified connector. We prioritize reliability and have protective circuits such as overvoltage protection and overload protection. 【Features】 ■ Size L222*W112*H45mm ■ PSE mark and Electrical Appliance and Material Safety Law ■ IEC62368-1 & IEC60601-1 ■ Consultation available for desired connector ■ Long-term stable supply ■ Full inspection conducted ■ Long-term warranty *For more details, please refer to the PDF document or feel free to contact us.
Complies with various safety standards! Contributes to reducing the time from product development to market launch.
The "EV100/EV101" is an AC-DC power unit specifically designed for EV fast chargers. It features a wide range of adjustable output voltage and can support power supply at 400V, 800V, and 1000V. By connecting up to 12 units in parallel, a charging system with a maximum output of 360kW can be constructed. 【Features】 ■ Maximum output of 360kW with 12 units in parallel ■ High efficiency of 96% peak ■ Wide operating temperature range of -40 to 70℃ ■ Protection features: overcurrent, overvoltage, undervoltage, overheating ■ Monitoring and control via CANBus communication *You can download the English version of the catalog. For more details, please refer to the PDF document or feel free to contact us.
A high-voltage voltage divider that can be monitored from a distance!
The "DVI" is a high voltage divider that inherits the features of our high voltage meter, excluding the display section. You can utilize your existing multimeter, and it is also possible to monitor from a distance using cables. 【Product Lineup】 ■ Standard high voltage divider (Type DVI-100S) ■ High voltage divider (Type DVI Series) ■ Unit-type high voltage divider (Type DVI-50-X Series) *For more details, please download the PDF or contact us.
It is possible to measure the voltage from a high-pressure generator with a small output capacity! A very user-friendly voltmeter that allows for high-precision measurements in a short time.
The "DHM (AC/DC)" is a digital high-voltage meter that can measure voltages from high-voltage generators with high input resistance and low output capacitance, suitable for both AC and DC. It is compact and robust, allowing for easy portability, and it is a very user-friendly voltmeter that can achieve high-precision measurements in a short time. 【Features】 ■ Capable of measuring voltages from high-voltage generators with low output capacitance ■ Compact and robust for easy portability! ■ Achieves high-precision measurements in a short time *For more details, please download the PDF or feel free to contact us.
The frequency range is DC to 50MHz, within -3dB! The adapter, stand, and storage bag are optional.
We would like to introduce our high-voltage probe, the 'PG Series.' The internal structure uses an insulation method with insulating gas. It is a passive probe designed to connect to an oscilloscope for measuring high-voltage waveforms. The stand is optional. Please feel free to contact us if you need it. 【Features】 ■ Connects to an oscilloscope to measure high-voltage waveforms ■ The internal structure uses an insulation method with insulating gas ■ Adapter, stand, and storage bag are optional *For more details, please refer to the PDF document or feel free to contact us.
Choosing the appropriate TVS (Transient Voltage Suppressor) protects the product from latch-up.
With the development and improvement of USB interfaces and protocols, many smart products are adopting USB Type-C as their connection interface. This allows for the support of diverse video, audio, and data transmission at higher transfer speeds. At the same time, signal transmission has become more susceptible to interference from external power surges. Therefore, the use of TVS diodes for surge protection should be more stringent. However, if users pursue only TVS devices with low clamp voltages without considering other parameters such as operating voltage, there is a risk of affecting real-time communication on the Type-C interface or, in extreme cases, causing latch-up due to EOS (electrical overload), which could damage the circuit. To achieve proper and effective transient voltage surge protection in the interfaces of electronic products with complex signal and power lines, adding TVS diodes to the interface will be the most effective protection solution.
Universal active filter capable of setting a wide range of frequencies with a 3-digit BCD (most significant digit in hexadecimal).
【Features】 ○ The circuit method adopts a switching method of a resistor circuit network using analog switches to achieve a variable range of over 1000 times with state variable method. ○ The cutoff frequency can be set digitally. ○ Wide frequency range: - 1Hz to 1.599kHz for L type - 10Hz to 15.99kHz for H type ○ Built-in high-precision, high-stability capacitors. ○ Frequency can be set directly at TTL (C-MOS) level. ○ Four outputs (LP, HP, BP, BEF) can be obtained simultaneously. ● For other functions and details, please download the catalog.
A low-frequency voltage-controlled oscillator that can control a frequency range from ultra-low frequency to 20 kHz with a voltage of 0 to 10 V.
This is a low-frequency voltage-controlled oscillator that can control a frequency range from ultra-low frequency to 20 kHz with a voltage of 0 to 10 V! 【Features】 ○ Frequency range available: L type max 2 kHz, H type max 20 kHz ○ Wide frequency variable range (over 100 times) ○ Good linearity (within ±1%) ○ Triangle wave and square wave can be output simultaneously ● For other functions and details, please download the catalog.
VCO、SYNTHESIZER
RFMD (RF Micro Devices, Inc.) is a specialized manufacturer of VCOs and CROs in the United States. We offer high-performance VCOs in the ISM band ranging from 10MHz to 8GHz, with a wide variety of standard products for GSM, CDMA, W-CDMA, various wireless applications, broadcasting equipment, measuring instruments, and more. Custom products are also available. All products are designed and tested in-house, with final testing and packaging conducted entirely by automated machines. Furthermore, our products comply with ROHS standards and exhibit excellent phase noise characteristics.
Made-to-order production tailored to the customer's requirements (cutoff frequency, LPF or HPF)!
This is a 1-channel Butterworth-type LPF and HPF with a slope of 18dB/oct. By fully customizing it to meet the customer's required characteristics, it is possible to achieve a cutoff frequency characteristic that perfectly suits the intended use. It serves as a very versatile tool for noise removal, bandwidth limitation during A/D conversion, and more. It has a wide allowable power supply voltage range and low current consumption, making it operable on batteries. When used in combination with our product T-VSR02-15Z as a power supply for AC100V, it allows for the construction of a filter system at an extremely low cost. Although it is made to order, delivery is usually within about one week. It comes with a complete measurement report of characteristics.
24V power input → 5V 1A DC-DC power card
Power module card equipped with an isolated DC-DC converter capable of outputting DC 5V 1A from a DC 24V power input. ■□■Features■□■ ■24V power input → 5V 1A DC-DC power card ■Can be used when operating a PLC controller with a 24V power supply. ■No need to prepare a separate 5V power supply, and since the power supply is of the isolated type, it is also effective for noise countermeasures in FA environments. ■Compact, input/output card size 50mm × 30mm ■24V→5V (1000mA) isolated DC-DC equipped *Crimping punch is required for wiring this product. ■For other functions and details, please download the catalog or contact us.
It is possible to generate signals with frequencies ranging from 8 GHz to 12.5 GHz using an external analog voltage!
An external analog voltage can generate signals with frequencies ranging from 8 GHz to 12.5 GHz. We also offer a product that outputs this signal after doubling it twice. It has a built-in regulator to reduce frequency fluctuations caused by voltage variations. Additionally, it includes a filter to suppress second harmonics. Performance: Frequency Range: 8 GHz to 12.5 GHz (DsA034-0812) 18 GHz to 25 GHz (DsA034-1825) Tuning Voltage Range: 0.2 V to 13 V Output Level: +10 dBm or higher Second Harmonic Level: -30 dBc or lower Signal Connector: SMA (f) Tuning Voltage Connector: SMA (f) Power Supply Voltage: DC +12V *For more details, please contact us.
High-quality, highly reliable medical devices that meet safety standards.
Specializing in switching power supplies for various industrial equipment, we offer a wide range of standard products. Our product supply has been consistent over the long term, and in recent years, the achievements of small-batch production of diverse varieties have been recognized, making our power supplies highly popular.