Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
181～210 item / All 362 items
It is a radiation temperature sensor with a fast response in low temperature ranges.
Class minimum size M12, class fastest 9ms, heat resistance 120℃, no cooling required.
Hygienic and resistant to oil and water.
This device is a waterproof handheld thermometer with a piercing sensor type that can easily measure the internal temperature of food and liquid temperature. With the technology and experience gained from understanding the cooking and processing sites in the food manufacturing field, we confidently deliver a waterproof handheld thermometer that everyone on-site can use with peace of mind.
It is a radiation thermometer for laser welding and laser soldering equipment.
Built-in special blocking filter. Cuts all visible light, invisible light up to 1800nm, and 10.6μm.
It is a radiation thermometer for measuring combustion gases.
●Wide measurement temperature range: 200 to 1400°C ●Long focus 45:1 (φ27mm/1.2m) ●Equipped with a 2-point laser pointer for accurate aiming
Simple operation of just pulling the trigger.
●Wide measurement temperature range: 0 to 1300°C ●Long focus 120:1 ●Scope sighting
With gas temperature and humidity sensors, dew point and surface humidity are also calculated.
■Features ●Safely measures surface temperature without contact ●Marks the measurement area with a 4-point laser ●Captures with a spot ratio of 50:1 from a distance ●Equipped with a humidity sensor, allowing for calculations of dew point and surface humidity
One-handed easy measurement infrared radiation thermometer
Easy-to-read LCD backlit display
Compact and easy-to-use pen-type infrared thermometer.
●Measurement range: -33 to +250℃ ●Resolution: 0.2℃ (-9.9 to +199.9℃) ●Low battery indication ●LED light function
It is a compact, lightweight, and easy-to-use temperature and humidity meter.
● Portable pen-shaped thermometer and hygrometer ● Compact and lightweight at 21g with a clip ● Simultaneous display of temperature and humidity ● Displays maximum and minimum temperature and humidity ● Low cost
It is a non-contact infrared thermometer for high-temperature measurements with excellent environmental durability.
■Features ●Measurement temperature range: +250 to +1600℃ ●Long focus: φ12mm/3600mm ●Small spot measurement of φ0.5mm ●Equipped with a 2-point laser marker for accurate aiming ●Durable stainless steel head, heat-resistant up to 85℃, no cooling required ●Protection structure: IP65 ●Easy emissivity setting with the rotary switch on the main unit ●Cable extension up to 15m available
We recommend the use of calibrated thermometers or data loggers for monitoring the storage temperature of vaccines.
The FDA (Food and Drug Administration) and CDC (Centers for Disease Control and Prevention) in the United States recommend the use of calibrated thermometers and data loggers for monitoring the storage temperature of vaccines. The MI1M-231M continuously monitors and displays the minimum and maximum temperatures during vaccine storage.
Capture the temperature distribution visually and quickly check for temperature anomalies.
- Holds temperature information for all individual pixels (1024 pixels) on the screen. The temperature of the touched area is displayed. - Simple overlay function for thermal images and visible images. It clearly shows where the temperature is rising, and it does not become unclear what is being photographed. - Wide measurement range up to 380℃. Temperature display in 0.1℃ increments. - Emissivity: adjustable in increments of 0.01 within the range of 0.01 to 1.00. - Built-in humidity sensor allows for measurement of not only object temperature but also environmental humidity. Useful for understanding the measurement environment. - Equipped with a touch panel. Smooth operation for checking temperature at desired points and selecting menus. - Features an auto power-off function to reduce battery consumption.
Sturdy, simple, safe
The non-contact thermometer is a new generation portable product designed based on industrial standards that meet processing performance requirements in high-temperature environments. This product can detect process temperatures and anomalies with high precision, excellent optical resolution, and robustness. It is ergonomically designed and features a comfort grip that allows operators to hold it securely. Additionally, to enhance usability, it employs dot technology for situations where it is impossible to visually aim at the measurement target in high-temperature conditions using laser targeting alone. The PC software supports real-time communication, data storage, graph display, and analysis. This groundbreaking thermometer is equipped with a mobile application for quick data transmission and processing, allowing it to be temporarily used as an online thermometer.
A versatile infrared thermometer that can accurately measure various temperatures.
● The built-in camera instantly displays and records measurement values in photos. ● Data transfer and storage are possible via app or USB. ● It supports various applications with five measurement modes, ensuring accurate results. ■ Product Highlights This is a radiation thermometer that can accurately and quickly measure and record temperature and relative humidity. While recording measurement values, the built-in camera in the thermometer takes photos that immediately display the relevant numbers. Detailed data is promptly recorded and can be shared with remote devices via a manufacturer app through Bluetooth connection. The radiation thermometer features five measurement modes: complex surface mode, contact temperature mode (K-type function), dew point mode, thermal bridge mode, and a user mode that can accommodate customized values, allowing for the recording of various temperatures.
Display the temperature, humidity, and heat stress index WBGT, as well as absolute humidity VH, from a remote location wirelessly.
Wirelessly display temperature and humidity, as well as the heat stress index WBGT and absolute humidity VH, from a remote location. To understand the risk of heat illness and the outbreak of seasonal influenza. Communication distance is up to 100m (line of sight distance, height 1.2m).
This is a handheld infrared thermal imaging camera that has obtained domestic explosion-proof certification.
This is a handheld infrared thermal imaging camera that has obtained domestic explosion-proof certification. It comes with a rugged case designed for use in hazardous areas, while maintaining the operability of the M2432EX-6TF, which features real-time contour correction MSX from a digital camera and a touch panel. By using the M2432EX-6TF, you can safely and easily check temperature distribution in areas subject to explosion-proof regulations, such as storage and supply stations for hazardous materials, manufacturing sites, and factories. *Note: Only domestically certified products have obtained Japanese explosion-proof standards.*
One-handed easy-to-hold hand grip type
● In addition to thermal images, visible images can also be captured. Furthermore, a fused image combining both can be displayed, making it easier to identify which parts of the actual object correspond to hot spots and cold spots. ● The Enhanced IR function (software processing of thermal images) allows for upscaling thermal images of 96×96 (9,216 pixels) to a resolution equivalent to 240×240 (57,600 pixels). ● The built-in high-capacity battery enables continuous use for up to approximately 8 hours. ● It has a drop resistance of 2 meters and complies with IP54 standards for dust and water resistance. ● Data management, editing, and report creation are possible with software for Windows. *Tripod is not included.
● Internal temperature can be measured with a contact probe, and surface temperature can be measured non-contact.
The tip of the probe is thin at 1.8mm, allowing for a fast response time and making it less noticeable when it leaves marks on the measured object.
It is an infrared radiation thermometer that covers a wide temperature range from -60°C to 1550°C.
Since it can measure high temperature ranges, its applications are expanding. The distance coefficient is approximately 35:1, allowing for temperature measurements of narrower spots. The emissivity can be set in increments of 0.01 within the range of 0.10 to 1.00. With the circle-type laser marker, it is easy to confirm the target measurement location.
It is a single-function, easy-to-use infrared thermometer. It allows you to measure temperature hygienically and safely without touching the object being measured.
For the circle-type laser marker, it is easy to check the reference points for measurement. It covers a temperature range from -34°C to 356°C. Three selectable emissivity settings are available (0.95, 0.70, 0.30).
DIAS Infrared's PYROSPOT Series 44
The PYROSPOT Series 44 is a versatile and robust radiation and two-color thermometer. The series includes products with a measurement range of -40 to 2500°C. Various options are available for use in a wide range of applications.
DIAS Infrared's PYROSPOT Series 54
The DIAS Infrared PYROSPOT Series 54 is a versatile high-speed radiation thermometer and two-color thermometer with a wide measurement temperature range of -40 to 3000°C across the entire series. It features a stainless steel housing, making it suitable for use in harsh environments. There are three types of aiming for the measurement section: laser, through-lens aiming, or video camera. It can be used in industries such as steel and metal, melting furnaces, and ceramics.
DIAS Infrared's PYROSPOT Series 55
The series covers a temperature measurement range of 75 to 3000°C. It is suitable for measuring the surface temperatures of metals, graphite, and ceramics. The stainless steel housing, compliant with IP65, allows for use in harsh environments.
DIAS Infrared's PYROSPOT (radiation thermometer)
A pyrometer is also known as a radiation thermometer or infrared thermometer. PYROSPOT represents a pyrometer for non-contact point temperature measurement in the range of -40°C to 3000°C. To minimize temperature measurement errors physically caused by inaccuracies in emissivity, measurements should be taken at short wavelengths. We offer a wide variety of pyrometers based on measurement temperature range, interface, environmental performance, and more. By answering a survey, we can recommend the most suitable product for you.
Compact infrared thermometer compatible with USB-C connector.
World's smallest class infrared sensor Maximum optical resolution of 22:1 • Robust sensing head - Usable at ambient temperatures up to 180°C without cooling • Two-piece design with easily accessible programming key and LCD backlit display • Built-in USB interface for easy sensor configuration from a smartphone or PC
Significant reduction in construction labor and costs!
◆Remote operation using a fixed transmitter ・Operating ground trolleys and processing machines from the crane operator's cabin ・Operating scrap press machines from the operator's cabin of power shovels, etc. ◆As a relay device connecting various equipment ◆For transmitting automatic operation control signals ・Interlocking between moving equipment ・Transmitting automatic operation signals from the sequencer to moving bodies, etc. ◆For bidirectional communication between moving bodies ・Simultaneous operation control between two trolleys for transporting hull blocks, etc.
Ultra-compact Easy Infrared Radiation Thermometer
Ultra-compact φ18mm x 85mm with keychain attached
Elimination of air bubbles in adhesive! Defoaming treatment shortened to just a few minutes! Includes five examples of solutions!
The "Awatori Nentaro," which simultaneously performs stirring and degassing with two centrifugal forces of rotation and revolution. It is widely used as a mixer capable of high-speed uniform dispersion and degassing treatment. This time, we are offering the latest "Case Study Collection," which includes "five examples of problem-solving" from companies that have introduced the "Awatori Nentaro"! [Overview of the Cases] 1> Conductive adhesive (eliminated air pockets, increased yield) 2> Epoxy resin + inorganic filler (number of produced samples increased tenfold) 3> Silver paste (degassing time reduced from 30 minutes to a few minutes) 4> Special wall material for anechoic chambers (improved functionality without cutting fibers) 5> Carbon nanomaterials (disintegration of primary particles completed in 2 minutes) *You can view it immediately from the "Download" link below!
Examples of cases where 5 hours of stirring can be achieved in 3 to 4 minutes. "Adhesion and Sealing Edition"
The self-rotating and orbiting mixer "Awatori Rentaro" can simultaneously perform stirring and de-aeration, allowing for high-efficiency uniform dispersion. It has been introduced in various fields. We have created a case study collection summarizing examples of solutions to our customers' concerns, titled "I Want to Mix Cleanly Without Adding Bubbles." This collection includes cases that have led to time savings and quality improvements. [Contents (Excerpt)] <Adhesive and Sealing Edition> ◎ Material processing time reduced from 5 hours to just 3 or 4 minutes ◎ Simultaneous processing of dispersion and de-aeration! Suppression of particle sedimentation separation ◎ Achieving high-precision de-aeration of liquid agents in barrels
For the stirring treatment of lithium-ion battery materials. Simultaneous processing of up to 1.6 kg of defoaming and stirring. Online demo available.
The "Awatori Rentaro ARV-931TWIN" is a rotational and orbital mixer that excels in stirring and degassing lithium-ion battery materials, from production applications to small-scale sample production. It can process over 1.6 kg under vacuum using a dual-unit system, contributing to the efficiency of stirring processes for lithium-ion battery materials through simultaneous stirring and degassing. 【Features】 ■ Stirring mode with a maximum acceleration of 670G and vacuum environment for simultaneous stirring and degassing ■ Achieves sub-micron level bubble removal ■ Rotational speed can be set according to the properties of the material ■ Touch panel for easier condition setting ■ Communication functions for remote operation and traceability management *You can view product materials and the comprehensive catalog via "PDF Download." If you wish to request an online demo, please apply through "Contact Us."
