We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Radio-frequency anechoic chamber.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Radio-frequency anechoic chamber(10m) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

Radio-frequency anechoic chamber Product List

46～60 item / All 64 items

Displayed results
RF-E 10 (E field electric field probe)

RF-E 10 (E field electric field probe)

It has the same basic structure as the "RF-E 02" and "RF-E 05" probes, but with higher resolution!

The "RF-E 10" electric field probe is a passive near-field probe. The electrode width of the probe head is approximately 0.2mm, allowing it to pinpoint the location of even the smallest electric field sources, such as a conductive path of 0.1mm or a single IC pin. Since the electrode surface needs to be placed directly on the measurement target where the electric field strength is high, it is not suitable for wide-range measurements. For measuring larger areas, please use the "RF-E 02" or "RF-E 05". 【Specifications】 ■ Type: Near-field probe ■ Size: 0.5x2mm probe head ■ Frequency range: 30MHz to 3GHz ■ Connector: SMB male, Jack ■ Resolution: 0.2mm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMC testing equipment "SFT1400"

EMC testing equipment "SFT1400"

Connection to coupling pliers or three-phase coupling networks via high voltage output!

The "SFT1400" is an EMC testing device that simulates burst noise for EFT testing as defined in the IEC 61000-4-4 and DIN EN 61000-4-4 standards. With a very short rise time of 5 ns, individual pulses can generate a wideband RF spectrum of up to 300 MHz. It also offers various special features such as simulating real bursts and noise to mimic natural phenomena. Thanks to its high timing accuracy, it is possible to couple burst pulses very precisely to specific processing times of the EUT in order to identify the location of faults. 【Features】 ■ Generation of wideband RF spectrum ■ Simple operation ■ Color touch display ■ Parameters can be changed even during testing ■ Memory function ■ Special features such as real bursts and noise *For more details, please refer to the related links or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMC testing equipment "SFT 2400"

EMC testing equipment "SFT 2400"

Parameters can be changed even during testing! Easily and continuously detect values prone to failure in the EUT.

The "SFT 2400" is an EMC testing device capable of connecting to coupling pliers and three-phase coupling networks through high voltage output. It simulates burst noise for EFT testing defined by the IEC 61000-4-4 and DIN EN 61000-4-4 standards. With an extremely short rise time of 5 ns, individual pulses can generate a wideband RF spectrum of up to 300 MHz. Microsecond burst pulses are accurately triggered with less than 25 ns of jitter. 【Features】 ■ Generation of wideband RF spectrum ■ Simple operation ■ Color touch display ■ Special functions such as real burst noise ■ Optical interface included ■ Wide range of accessories available *For more details, please refer to the related links or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dual Polarized Vivaldi "TC-93076A"

Dual Polarized Vivaldi "TC-93076A"

We have a well-equipped dedicated fixture for polarization switching, XYZ axis position adjustment, and more.

The TC-93076A is a dual polarized bivalve that can shorten measurement time and reduce costs. It is capable of receiving sensitivity tests and transmission tests in frequency bands such as mobile phones, WLAN, PDA, Bluetooth, LTE, and GNSS. It can be installed in multiple units radially within a shield box, making it compact enough for OTA testing. Custom manufacturing is also possible to meet your specific needs, such as changes in the range of motion. Please feel free to consult us. 【Features】 - Ultra-compact - Wideband - Suitable for measurements in medium to large shield boxes - Well-equipped dedicated fixtures for polarization switching and XYZ axis position adjustment - Shortened measurement time and cost reduction *For more details, please refer to the related links or feel free to contact us.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UHF band RFID tag evaluation solution

UHF band RFID tag evaluation solution

[Application Example] Measures Against Radio Law Using a Radio Shielded Room

【Product Introduction】 ■Anechoic Chamber / Shield Box Low price, lightweight, short delivery time! High-quality, reliable, and cost-effective anechoic chambers and shield boxes provided by a measurement instrument manufacturer. ■Electric Turntable MT107 An electric turntable suitable for evaluating small antennas and wireless devices. UHF band RFID utilizes a radio wave method in the frequency range of 860 to 960 MHz. The output of the reader for on-site radio stations is less than 1W. To prevent unnecessary radio waves from spreading during evaluation and testing, the tester is used in conjunction with the anechoic chamber. We offer a variety of sizes of anechoic chambers.

  • Other electronic measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
STE1420

STE1420

Achieve connection to coupling pliers and three-phase coupling networks through high voltage output!

The 『STE1420』 is an EMC testing device that simulates burst noise for EFT testing as defined by the IEC 61000-4-4 and DIN EN 61000-4-4 standards. With a very short rise time of 5ns, individual pulses can generate a wideband RF spectrum of up to 300MHz. Standard test levels 1, 2, 3, and 4 are programmed, and additional test sequences can also be saved via the memory function. 【Features】 ■ Generation of wideband RF spectrum ■ Simple operation ■ Color touch display ■ Parameters can be changed during testing ■ Memory function *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SFT2400

SFT2400

Very short rise time of 5 ns! Individual pulses generate a wideband RF spectrum up to 300 MHz.

The "SFT2400" is an EMC testing device that simulates burst noise for EFT testing defined by the IEC 61000-4-4 and DIN EN 61000-4-4 standards. It also offers various special features, such as simulating "real bursts" and "noise" to mimic natural phenomena. The "IFM" and "DFM" (increase or decrease of frequency within the burst packet) functions are important tools for investigating the effects of resonance or saturation on the EUT. 【Features】 ■ Generation of wideband RF spectrum ■ Simple operation ■ Color touch display ■ Connection to coupling pliers or three-phase coupling networks via high voltage output ■ Parameters can be changed even during testing *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF-E 02 (E field electric field probe)

RF-E 02 (E field electric field probe)

Bring the underside of the probe head close to the object being measured and detect the emitted electric field!

The "RF-E 02" electric field probe is a passive near-field probe. It detects separated electric field sources on bus structures, large components, or the surfaces of power supplies. The lower electrode surface of the probe head is approximately 2x5 cm and works well at a distance of 1 to 2 cm from the component. It has the same basic structure as the "RF-E 05" and "RF-E 10" probes. 【Specifications】 ■ Type: Near-field probe ■ Size: 23x53 mm probe head ■ Frequency range: 30 MHz to 1.5 GHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Quad Rigid Horn "TC-93474A"

Quad Rigid Horn "TC-93474A"

A dedicated fixture is available for the compact and wideband antenna!

The "TC-93474A" is an ultra-compact quad rigid horn that allows for reduced measurement time and cost savings. Multiple units can be installed radially within a shielded box, enabling OTA testing. It is suitable for measurements within medium to large shielded boxes. It is capable of conducting reception sensitivity tests and transmission tests in frequency bands such as mobile phones, WLAN, PDA, Bluetooth, LTE, and GNSS. 【Features】 ■ Wideband ■ Comprehensive dedicated fixtures for polarization switching and XYZ axis position adjustment ■ Can be installed on the walls, ceiling, and floor of a shielded box ■ Adjustable in the X/Y/Z axis directions ■ Custom manufacturing is possible to accommodate changes in the range of motion as needed *For more details, please refer to the related links or feel free to contact us.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMC testing equipment "STE1420"

EMC testing equipment "STE1420"

A wide range of accessories is available! Special features such as real burst and noise.

The 『STE1420』 is an EMC testing device that can generate a wideband RF spectrum of up to 300MHz due to its very short rise time of 5ns, allowing for individual pulses. Standard test levels 1, 2, 3, and 4 are programmed, and additional test sequences can also be saved via the memory function. Furthermore, all burst parameters can be changed during burst testing, making it easy and continuous to detect the failure threshold of the EUT. 【Features】 ■ Generation of wideband RF spectrum ■ Simple operation ■ Color touch display ■ Parameters can be changed during testing ■ Memory function ■ Saving of test sequences *For more details, please refer to the related links or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF-E 05 (E field electric field probe)

RF-E 05 (E field electric field probe)

It has the same basic structure as the "RF-E 02" and "RF-E 10" probes, but it detects electric fields in a very narrow range!

The RF-E 05 electric field probe is a passive near-field probe designed for use with scanners manufactured by Langer. The electrode width of the probe head is approximately 0.5mm, allowing for accurate identification of electric fields around clocked lines, IC pins, and small components. By placing and holding it on components or printed circuit boards, it can detect sources of RF electrical interference. 【Specifications】 ■ Type: Near-field probe ■ Size: 1x8mm probe head ■ Frequency range: 30MHz to 3GHz ■ Connector: SMB male, Jack ■ Resolution: 0.6mm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Radio Wave Dark Room CHC Compact Hybrid Chamber

Radio Wave Dark Room CHC Compact Hybrid Chamber

A six-sided anechoic chamber with a grand plane, featuring a floor equipped with electromagnetic wave absorbers!

The "CHC Compact Hybrid Chamber" is a small electromagnetic wave anechoic chamber with a measurement distance of 3.0m. It allows for evaluations in accordance with the commercial product radiation immunity (EMS) testing standard IEC/EN61000-4-3, making it popular mainly for evaluation measures during research and development. Additionally, for radiation emission (EMI) testing, while there are height restrictions, preliminary evaluations based on the CISPR 16-1-4 standard can also be conducted. 【Features】 ■ EMI preliminary measurements according to CISPR 16-1-4 ■ EMS measurements fully compliant with IEC/EN 61000-4-3 ■ A cost-effective solution for EMS measurements combined with EMI measurements in the GHz range *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[OTA Test Use] Shielded Tent Type Simple Anechoic Chamber

[OTA Test Use] Shielded Tent Type Simple Anechoic Chamber

A low-cost, highly reliable simple electromagnetic anechoic chamber will be constructed using a hybrid structure of a shield tent and a high-performance anechoic space.

This is a radio anechoic chamber capable of OTA testing from 500MHz to 100GHz. It features a shielded tent constructed as an external shielding space, with six surfaces inside equipped with radio wave absorbers. Previous shielded tents experienced fluctuations in the internal electromagnetic field distribution and multipath interference due to reflections, making stable measurements difficult, especially for customers seeking product evaluation in OTA. This product addresses these issues by installing a robust radio wave absorber structure on all six surfaces inside the shielded tent, stabilizing the internal electromagnetic field distribution and enabling high-precision OTA testing. 【Main Applications】 ■ Mobile phone devices ■ Wireless communication devices ■ Base stations ■ Wi-Fi ■ Bluetooth ■ 5G (including sub-6 and millimeter waves) ■ Automotive radar (24GHz, 77GHz) ■ Human detection sensors (10GHz, 60GHz) ■ LPWA devices 【Features】 ■ High-performance shielded tent Ikisol Lab as standard ■ Can be constructed at a low cost with performance equivalent to previous radio anechoic chambers. ■ Can be built in a short construction period. *For more details, please feel free to contact us.

  • 内部.png
  • Cabinets and Boxes

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Quad Rigged Horn "TC-93474B"

Quad Rigged Horn "TC-93474B"

A compact size that allows for multiple installations in a radial arrangement and enables OTA testing!

The "TC-93474B" is a quad rigid horn suitable for measurements inside medium to large shielded boxes. It allows for polarization switching and can be mounted on the walls, ceiling, or floor of the shielded box, with adjustments possible in the X/Y/Z axis directions. It is capable of conducting reception sensitivity tests and transmission tests in frequency bands such as mobile phones, WLAN, PDA, Bluetooth, LTE, and GNSS. 【Features】 ■ Comprehensive dedicated fixture for polarization switching and XYZ axis position adjustment ■ Reduction of measurement time and cost ■ Multiple units can be installed radially for OTA testing ■ Ultra-compact ■ Wideband *For more details, please refer to the related links or feel free to contact us.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Radio-frequency anechoic chamber

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.