Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 80 items
Panel mount USB 2.0 Type A female-to-female cable type [Neutrik type bezel set]
● This is a panel mount type USB connector (USB 2.0 compatible, dual-side Type A female) designed to fit the Neutrik DLX series. ● This product is a combination of the USB 2.0 compatible extension cable SICC-USBAFTF-ST-200 and the Neutrik DLX size bezel 3013BUSXLRBK. For more details, please see the related link.
Snap-in relay connector with HDMI female ports on both sides, rear angle direction wiring pull-out type, white 【HDMI 2.0 compatible】
● This is a snap-in inline connector of HDMI type used for transmitting high-resolution digital images. ● It is compatible with HDMI 2.0. ● This adapter pulls the cable out at a 90° angle from the back side, making it ideal for use in tight spaces. For more details, please see the related links.
Snap-in relay connector with HDMI female ports on both sides, rear angle direction wiring pull-out type, black [HDMI 2.0 compatible]
● This is a snap-in inline connector of HDMI connector type used for transmitting high-resolution digital images. ● It is compatible with HDMI 2.0. ● This adapter pulls the cable out at a 90° angle from the back side, making it ideal for use in tight spaces. For more details, please see the related links.
Snap-in relay connector, both sides 3.5mm stereo mini socket terminals, rear angle direction wiring pull-out type, white.
● This is a snap-in relay connector for a 3.5mm stereo mini jack, which is commonly used for audio signal transmission. ● It is an adapter type that pulls the cable out at a 90° angle from the back side, making it ideal for use in tight spaces. Depending on the type of guide chip used, the cable can be pulled out in four directions: up, down, left, and right. ● It can be installed on outlet plates from other manufacturers using a guide chip. For more details, please refer to the related links.
Snap-in relay connector USB connector (Type A female, white) [USB 3.0 compatible] Cross-wiring type
● This is a snap-in extension connector for Type A USB connectors used for connecting peripheral devices to a computer. ● It supports USB 3.0. ● The connector shape is a female-to-female extension adapter type. ● The internal wiring of this product is cross-wired (pins 5 and 8, as well as pins 6 and 9 are crossed). Depending on the cable connected to this product, communication may not be possible under the USB 3.0 standard. ● It can be installed using a guide chip on outlet plates from other manufacturers. For more details, please refer to the related links.
Snap-in relay connector USB connector A-type dual insertion (both front and back sides are dual insertion A female) white
● This is a snap-in extension connector for type A USB connectors used for connecting peripheral devices to a computer. ● It is compatible with USB 2.0. ● The connector shape is a female-to-female extension adapter type. ● Additionally, the USB ports on both ends are dual-insertion type connectors that do not require attention to the insertion direction. ● It can be installed on outlet plates from other manufacturers using a guide chip. For more details, please refer to the related links.
Snap-in relay connector RJ-12 female (6-position 6-contact modular connector (female), compatible with 6-position 4-contact RJ-11, straight type crimping section)
● This is a snap-in relay connector for connecting modular cables for telephone and fax. ● The connector is an RJ-12 standard connector with 6 positions and 6 contacts, but it can also connect to the commonly used RJ-11 standard connector with 6 positions and 4 contacts. ● On the wall wiring side, you can connect telephone modular cables with 6, 4, or 2 contacts by crimping. ● When using the 6-position 4-contact (6P4C, RJ-11 standard) commonly used for telephone terminals, wire the back terminal block to terminal numbers 2, 3, 4, and 5 as follows for each wire of the 4-wire telephone line (wire colors are "black, green, red, yellow" or "black, white, blue, brown"): 2 ... black 3 ... red (or white) 4 ... green (or blue) 5 ... yellow (or brown) ● It can be installed on outlet plates from other manufacturers using a guide tip. For more details, please refer to the related links.
Snap-in relay connector, supports 10Gbps communication, PoE++ compatible, RJ-45 female (horizontal crimp type, for LAN wiring, CAT6A compatible)
● This is a snap-in relay connector for connecting LAN cables up to Category 6A. ● It is a relay adapter compatible with 10G BASE (10Gbps) Category 6A (transmission frequency bandwidth 500MHz/10GBASE-T) communication. ● It supports IEEE802.3bt (PoE++). This standard enhances the power supply capability of the network, making it suitable for specialized devices and high-power consumption devices such as video conferencing equipment. ● The product is of the type that is crimped horizontally. ● It can be installed on outlet plates from other manufacturers using a guide chip. For more details, please refer to the related links.
Snap-in relay connector, dual RJ-45 female cylindrical (for LAN wiring, CAT6 compatible, straight connection, white, short length type)
●This is a snap-in type relay adapter for extending LAN cables. ●The total length of the adapter is shorter than conventional products at 25mm, making it suitable for use in tight spaces. ●It supports 1000BASE-T (Category 6). ●The connector type is a female-to-female relay adapter. ●It can be installed on outlet plates from other manufacturers using a guide chip. For more details, please see the related links.
This is a snap-in inline connector for single-core (Simplex) use, designed to connect SC connectors used in fiber optic cables.
● This is a snap-in relay connector for single-core (Simplex) use, designed to connect SC connectors used in fiber optic cables. ● The connector shape is a female-to-female relay adapter type. ● Additionally, it can be installed on furniture outlets from other manufacturers using a guide tip. For more details, please refer to the related links.
24-Port Patch Panel with RJ45 Cable Hanger: PPCH-RJ/RJ24
● 1U size, 24 ports ● Cable hanger (removable) ● Adapters can be freely combined (optional) ● RoHS compliant
障害対策や保守対策、システムの障害場所の切り分け作業が容易に！！
★お急ぎの方はネットショップへ★ http://www.dci.co.jp/ ★特注応相談★ 光パッチパネルは回線側と宅内装置側との2枚セットで19インチラック（1U/2U 等）に取付けて使用します。光回線と光通信装置/光伝送装置を数多く保有する局舎、データセンター、放送センター、基地局などの回線の切分、回線及び装置の変更に使用されます。
![24-port optical patch panel [1-core SC, with cable hanger]](https://image.mono.ipros.com/public/product/image/583/2000161597/IPROS190931851117106485.jpg?w=280&h=280)
Single mode, multi-mode, OM3 common versatile specifications.
● 1U size, 24 ports ● Cable hanger (removable) ● Adapters can be freely combined (optional)
1 piece + compact and slim + no need for stripping + waterproof!
Just press and it's easy! Waterproof connector for wire splicing, ideal for on-site construction. 【Feature 1】Super easy wiring! - No special tools required: General pliers and similar tools can be used. - No need to strip wire insulation: Just cut the wire to the required length and insert it directly. - Connect one side at a time: Allows for splicing work between power supply and load by one person. - Transparent body: You can visually confirm if the wiring is correct. - Wide range of applicable wires: Suitable for single wires, tin-coated wires, and stranded wires from 0.3 to 0.75 sq. 【Feature 2】Revolutionary waterproof structure! - Simple: A groundbreaking waterproof structure filled with silicone-based hydrophobic gel inside the connector. - Immersion OK: Complies with IPX8* standards. *Passed water depth test of 1m for 2 hours. - High weather resistance: UV-resistant for outdoor exposure use. (Housing also made of UV-resistant resin) *For more details, please refer to the PDF document or feel free to contact us.
Introducing a crimp-type inline connector that does not require stripping of the wire insulation, compliant with the RoHS directive for 10 substances!
The "NDC Series" is a pressure connection type intermediate connector that can be easily connected with commercially available pliers. No stripping of wire insulation is required. It allows for male and female connections with a single connector. Additionally, "NDC2824," "NDC2420," and "NDC2018A" can be linked together to be used as multi-pole connectors. 【Features】 ■ Male and female connections possible with a single connector ■ No stripping of wire insulation required ■ Easy connection with commercially available pliers ■ RoHS compliant *For more details, please refer to the PDF materials or feel free to contact us.
