Release Coating Product List and Ranking from 4 Manufacturers, Suppliers and Companies

Mold surface treatment agent allows for continuous release. Easy application on-site.

Please try this when you have difficulty with resin molding. It demonstrates overwhelming continuous release properties. After application in the molding area, air dry for 2 minutes at room temperature.

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Please try this when regular release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, excellent release properties, continuous release with a single application, free of regulated substances.

FloroSurf FG-5095W is an environmentally friendly water-soluble release agent with excellent release properties. Please try it when conventional release agents do not work.

FluoroSurf FG-5095W is a water-soluble fluorine-based release agent. It is ideal for VOC countermeasures and does not use any regulated PFAS substances such as PFOA, PFOS, or PFHxS. When applied with a brush or spray to molds for resin molding elastomers and dried at room temperature for about 10 minutes, the release component reacts and adheres to the mold surface, demonstrating excellent release properties. ◎ The durability of the release effect is outstanding, allowing for continuous release. ◎ The film is at the nanometer level, enabling accurate reproduction even for complex and precise surface shapes. It can also be used for nanoimprinting. ◎ There is minimal contamination of the mold, significantly reducing cleaning efforts. ◎ There is no transfer to the molded products, eliminating the need for a cleaning process. ◎ There is no clouding of the workpiece during transparent resin molding.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for carbon fiber CFRP, excellent release properties.

Overwhelming continuous release properties in carbon fiber CFRP molding. Easy application with a brush or spray. Dries at room temperature in 5 minutes after application. Samples available.

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult carbon fiber (CFRP)! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluororesin is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cracking occurs during the release of carbon fiber sheets. ■ There is no cloudiness in the workpiece even with transparent resin molding. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is necessary during mold reworking. ■ It is effective in reducing melt fracture and sharkskin in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agents [for rubber molding] continuous release and quality improvement

Solving the challenges of rubber molding sites! Improving productivity with overwhelming release properties.

In the rubber molding industry, there is a demand for both product quality and productivity. Particularly in complex shapes and precision products, molding defects can occur due to release agent issues, potentially leading to reduced yield. Additionally, transfer of the release agent and adhesion to molds not only compromises product quality but also increases cleaning processes. Our water-soluble release agent addresses these challenges and supports the balance between productivity and quality. 【Usage Scenarios】 - Release of rubber molded products - Application to molds - Extrusion molding 【Benefits of Implementation】 - Improved continuous release properties - Reduction of molding defects - Decrease in cleaning processes - VOC-free, reducing environmental impact

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for electronic components

Ideal for precision molding! Continuous release, non-silicone, air-dry in 5 minutes at room temperature.

In the electronic components industry, precision molding requires the faithful reproduction of intricate mold shapes to efficiently produce high-quality products. Particularly in the molding of complex shapes and fine parts, the quality of release properties significantly affects production efficiency and product quality. Traditional release agents have led to issues such as poor release, transfer problems, and increased cleaning efforts, which can decrease productivity. Our water-soluble release agent addresses these challenges and contributes to improved productivity. 【Application Scenarios】 - Precision molding molds - Nanoimprinting - Extrusion molding (mouthpieces) 【Benefits of Implementation】 - Improved continuous release properties - Enhanced quality of molded products - Reduction in cleaning processes - Improved working environment

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, defects in mold release during the forming process are a significant factor that reduces production efficiency. Mold release defects can lead to damage to parts and aesthetic issues, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release capability. 【Application Scenarios】 - Forming of interior parts such as dashboards, door trims, and console boxes - Forming of parts with complex shapes or high design aesthetics - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield due to reduced mold release defects - Reduced frequency of mold maintenance - Cost savings through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, high performance and continuous release, transparent resin without cloudiness, dry.

Please try this when conventional release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily performed on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, faithfully reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * There is no cloudiness when molding transparent resins. * By applying it to the die of extrusion molding, it can also reduce defects like splay and sharkskin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for controls specified by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Improvement of Mold Release for Molding Dies! Non-Stick Coating for Aluminum Molds

What is the coating used to release rubber products that tend to stick from molds? We will introduce case studies of solutions through the surface treatment of molding molds.

■Concern When molding rubber of different materials in layers, the products molded in the mold enter the vulcanization process while still in the shape of the mold. The products were made of materials that easily adhered to the mold, resulting in a phenomenon where they stuck to the mold and could not be removed after vulcanization. ■Background During demolding, strong forces are applied, so using standard fluororesin coatings posed a risk of peeling due to insufficient film strength. We recommended a Bi-Coat that excels in release properties and wear resistance, but the mold in question was made of soft aluminum and required surface treatment compatible with sulfur vulcanization, necessitating the selection of a Bi-Coat treatment that could adapt to both conditions. ■Coating Adopted Super Bi-Coat NYY-11-F05 ■Adoption Process and Effects We tested a Bi-Coat suitable for aluminum substrates and usable for sulfur vulcanization. Initially, demolding was good, but rubber adhesion began to occur within a short period. Therefore, we proposed and tested the "Super Bi-Coat NYY-11-F05," which excelled in release properties, achieving both initial demolding and sustained release properties. This led to its adoption. *Product data PDF is available for download.*

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Surface Treatment to Enhance Release Properties of Biodegradable Plastic Molding Dies

We will introduce examples of surface treatments to enhance the release properties of biodegradable plastics and improve molding troubles.

■Concern Due to the different moldability of biodegradable plastics compared to regular plastics, there were issues with mold release in the prototypes, leading to molding troubles. ■Background We received this consultation because there is no track record of surface treatment with the materials being molded, and we do not know the appropriate surface treatment. ■Coating Adopted Bicoat Exceed NYK-2000E ■Adoption Process and Effects At Yoshida SKT, we prepared a collection of samples suitable for mold release from molding molds, and confirmed the release properties with actual plastics. We processed the well-performing NYK-2000E into the prototype mold, and it has been used without issues for several months. *Detailed surface treatment materials can be downloaded as a PDF.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

For cases where conventional release agents do not work well in molding precise surface shapes, please try Fluorosurf. There are numerous achievements in continuous molding.

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Fluorine treatment on mold surface in-house (easy application + room temperature drying)

It is easy to perform release agent treatment that surpasses in-house baked fluororesin processing. Significant reduction in processing costs and delivery times!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it to the mold with a brush or spray and allowing it to dry at room temperature for about 10 minutes, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. 【Features】 ■ Strongly adheres in reaction to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment and easy management *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of the molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability, with proven continuous release performance over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes, eliminating the need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce surface defects. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Dry fluorine-based mold release agent. Overwhelming continuous release performance. Please try it when conventional release agents do not work well. No cleaning of molded products required. Samples available.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other molds
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nanoimprint Release Agent Fluorosurf NL Series

We have a proven track record in improving the throughput of nanoimprinting! We can accommodate both quartz molds and electroformed molds.

Release agent for nanoimprint molds, Fluorosurf NL series By applying it to molds for nanoimprinting, a fluorinated compound (perfluoropolyether) is chemically bonded to the mold surface with a layer thickness of about 10 nm, achieving strong adhesion. This enables continuous release, significantly improving the productivity (throughput) of nanoimprint molding. Application can be easily done using methods such as spraying, and it dries at room temperature in 5-10 minutes. It is non-flammable and low-odor, making it safe. Reapplication is also easy. We offer two types: NL-1 for optical nanoimprinting NL-2 for thermal nanoimprinting *Free sample liquid available! (Please cover only the shipping cost = shipped cash on delivery) Feel free to request it.

Company：フロロテクノロジー
Price：Other

Other polymer materials
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release-type dry release agent for fine molding "Nanoimprint"

High release properties, compatible with nano-level surface shapes and nano-imprinting "FloroSurf" - Easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer coatings and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides strong release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin-walled products. ~ We are offering free samples exclusively for businesses! ~ Please select "Request Sample" via the [Contact Button] below.

Company：フロロテクノロジー
Price：Other

Other molds
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent Fluorosurf for precision surfaces, for fine molding, nanoimprint.

High release properties with nanometer-level surface shapes and compatibility with nanoimprinting "FloroSurf" - easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to provide release or you want to improve continuous release properties, this is where it shines. "FloroSurf" bonds tightly to the mold surface with a nanometer-level ultra-thin film, imparting strong non-stick and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins and elastomers, and fragile thin materials. ～ We are offering free samples exclusively for corporate clients! ～ Please indicate "Sample Request" when you contact us using the button below.

Company：フロロテクノロジー
Price：Other

Other molds
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine surface treatment of molds at our own site - Room temperature release agent - FluoroSurf

Fluorine-based dry release agent. Please try it when conventional release agents do not work well. Overwhelming continuous release properties. Easy to apply and dries at room temperature in 5 minutes. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Room temperature construction dry release agent Fluorine surface processing of molds at our own site

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Easy to apply, it dries at room temperature in 5 minutes on the molding site. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good environment on-site By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to businesses)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry high-performance release agent Fluorosurf silicone-free

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, and can be easily applied. Contains no silicone-based compounds.

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that it does not contaminate molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts exceptional durability, with proven performance for continuous release over thousands of shots, and reapplication using a brush or spray can restore its effectiveness. **Features** - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modifications. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.*

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. It is easy to apply, can be applied on the molding site, and only requires 5 minutes of air drying at room temperature. No cleaning of the molded products is necessary.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick coating: Transparent non-stick coating can be easily applied at room temperature.

Power of fluorine strongly prevents adhesion of adhesives and dirt! The transparent thin film surface treatment can be easily applied at room temperature. Recoating on-site is also easy.

The simplified fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This can save you the hassle of daily maintenance. 【This is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

The Fluoro Surf FG-5095W is an environmentally friendly water-based release agent with excellent release properties. Please try it when conventional release agents do not work.

FloroSurf FG-5095W is a water-based fluorine release agent. It is ideal for VOC countermeasures and does not use any regulated substances such as PFOA, PFOS, or PFHxS. When applied to elastomer molds for resin molding using a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the molding resin on the surface, demonstrating excellent release properties. The release component reacts and adheres to the mold surface, providing sustained release effects and enabling continuous release. It is particularly effective in situations where conventional release agents struggle to perform. The coating is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes, resulting in less mold contamination and significantly reducing cleaning efforts.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent case: No transfer to the workpiece in dry conditions! Continuous release is now possible!

It is easy to perform release agent treatment that exceeds in-house baked fluororesin processing. Significant reduction in processing costs and lead times!

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and dried at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents fail to work properly. The film is at the nanometer level, allowing for precise reproduction even on complex and intricate surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Furthermore, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, making cleaning of molded products unnecessary ■ Low odor and non-flammable, maintaining a good working environment and easy management.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

Demonstrates its true capabilities in thin material molding with overwhelming release properties. Easy to apply, can be applied on-site during molding, and dries at room temperature in just 5 minutes. Free of PFOA/PFOS. Non-flammable and safe.

The "FloroSurf FG-509X Series" is a release agent that forms a dry fluorine film on the surface of molds. By simply applying it with a spray gun in our manufacturing facility and allowing it to air dry at room temperature, a dry, non-stick surface is imparted to the mold. There is no need to outsource processing to specialized contractors. The film is extremely thin, allowing for excellent continuous release properties even for complex and precise shapes. Additionally, the release agent components do not transfer, so cleaning of the molded products is unnecessary. Please try it in cases where conventional release agents do not work well during CFRP molding. Furthermore, our products do not contain regulated substances such as PFOS or PFOA. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ Film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with a brush or spray gun, with air drying in just 10 minutes at room temperature. No need for external processing ■ No removal of the film is required during reapplication ■ Low odor and non-flammable. Not classified as an organic solvent, significantly reducing legal management items Applying it to the nozzle of extrusion molds can also reduce haze. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for transparent resin: "No cloudiness on the product!" "Continuous release is possible."

A dry release film is formed on the surface of the mold. Continuous release is possible, and there is no cloudiness on the resin. Since it is dry, the release agent components do not transfer, so cleaning of the workpiece is unnecessary.

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that molded products remain clean and do not require washing. It is the only release agent that does not cause cloudiness when molding transparent resins. With a thin film at the nanometer level, it demonstrates excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It has high release properties and excellent durability, with a proven track record of continuous release over thousands of shots. It is particularly effective in situations where conventional release agents fail. 【Features】 ■ The release agent components react with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ No removal of the film is required during mold reworking. ■ There is no transfer of release agent components, and cleaning of molded products is unnecessary. ■ When performance degrades, reapplication is as simple as top-coating! No need to remove the old film. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.).

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Please try the following for moldability: "Continuous molding possible" "Dry non-transfer"

Overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in just 5 minutes after application. The film thickness is only a few nanometers, and cleaning of the molded product is unnecessary. Sample available.

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. PFAS regulated substances (such as PFOS, PFOA) are not used. Please try it when conventional release agents do not work. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, enabling continuous release even when conventional release agents fail. ■ With a film thickness of just a few nanometers, it can faithfully reproduce surface shapes at the nano and sub-micron level. ■ FluoroSurf can be easily applied with brushes or spray guns, while Mold-Free can be applied with an aerosol. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, and no transfer of components to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ It is non-flammable, thus not classified as hazardous under fire laws. (Excluding Mold-Free) It has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding and addressing melt fracture issues.

Company：フロロテクノロジー
Price：Other

Other molds
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for recycled plastics, excellent release properties.

Overwhelming release properties even with recycled plastic. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application. No cleaning of molded products required. Samples available.

"FluoroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult recycled plastics! Please try it when conventional release agents fail. PFAS-regulated substances are not used. 【Features】 ■ The fluoropolymer film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with brushes or spray guns, while Mold Free can be applied directly from an aerosol can. The application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold Free MF-02S) ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent: high performance, continuous release possible, dry non-transfer, non-silicone.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using brushes or spray guns. * The release component reacts and bonds to the surface of the mold, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the die of extrusion molding, it can also reduce defects like orange peel and shark skin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for compliance with fire safety and occupational health regulations. * If you would like a free sample, please indicate "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for transparent resin: No cloudiness during the molding of transparent resin!

Release agent for transparent resin forms a dry release film on the mold surface. No cleaning of molded products is required. Non-flammable and safe + easy to apply. Contains no silicone compounds.

"FloroSurf" and "Mold Free" are fluorine-based dry release agents that do not cause cloudiness in transparent resins. They do not contain silicone, ensuring that molded products remain clean and do not require washing. Additionally, no PFAS regulated substances are used at all. These agents demonstrate their effectiveness in situations where traditional release agents struggle to perform. They are highly durable, with a proven track record of continuous release over thousands of shots, and their performance can be restored by reapplying with a brush or spray. There are two types available: solution type (product name FloroSurf) and aerosol type (product name Mold Free). 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking; reapplication restores release performance ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment (excluding aerosol type) *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release Coating Product List and Ranking from 4 Manufacturers, Suppliers and Companies | IPROS GMS