We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Shutter Gate.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Shutter Gate - List of Manufacturers, Suppliers, Companies and Products

Shutter Gate Product List

31～45 item / All 46 items

Displayed results
FIT GATE construction example: shutter gate + privacy wall 3

FIT GATE construction example: shutter gate + privacy wall 3

The wall extending to the back connects with the sleeve wall constructed of concrete blocks, creating a cohesive entrance area!

We would like to introduce a case where a gate that integrates a shutter gate and a privacy wall was manufactured and delivered. Due to the size of the gate, the shutter gate and privacy wall were manufactured separately and connected on-site. After the installation of the structure, the finishing work was carried out by the contractor. Ivory-colored tiles that matched the residence were applied, resulting in an elegantly finished gate. 【Case Overview】 ■ Approximately W8,140 × H2,925 mm (roof dimensions) ■ Installation time: about 5 hours ■ Finished with an elegant impression ■ A cohesive gate area *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 5

FIT GATE Construction Example: Shutter Gate 5

Introduction of a case where the roof of the shutter gate was made slightly larger at 150mm.

We would like to introduce a case where a shutter gate for two units was manufactured and delivered as a single unit FIT GATE. The dimensions are approximately W6,300 × H2,925 mm, and the installation time was about 3 hours. Normally, to allow for the carport roof to fit, the shutter gate's roof extends about 100 mm at the back, but this time we made it slightly larger at 150 mm. After the installation of the structure, finishing work such as tiling was carried out by the contractor. [Case Overview] ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 7

FIT GATE Construction Example: Shutter Gate 7

Introduction of a construction case where columns and beams were manufactured separately and connected on-site.

We would like to introduce a case where a shutter gate, with a part of the beam extended to serve as a roof for the approach, was manufactured and delivered by FIT GATE. Since the effective opening height of the shutter is H2500mm, the columns and beams were manufactured in segments and connected on-site. The extended beam, designed as a roof, was equipped with optional rain gutters to facilitate rainwater management. After the installation of the structure, the contractor applied the finishing touches, combining it with a stylish functional gatepost, resulting in a functional and fashionable gate. 【Case Overview】 ■ Dimensions: Approximately W8,685 × H3,225mm (total length) ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 11

FIT GATE Construction Example: Shutter Gate 11

The protruding roof in front has been fitted with downlights supplied during manufacturing.

We would like to introduce a case where a shutter gate designed with variations in the overhang and height of the roof and columns was manufactured and delivered by FIT GATE. Due to its height and depth, it was manufactured in sections and connected on-site. The downlights provided were installed during manufacturing on the protruding roof. After the structure was installed, finishing work was carried out by the contractor, completing the area around the gate. [Case Overview] ■ Dimensions: Approximately W6,480 × H3,125 mm (Effective opening W5,760 × H2,300) ■ Installation time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 12

FIT GATE Construction Example: Shutter Gate 12

We will introduce a case where each building was manufactured as a single unit and connected on-site.

We would like to introduce a case where a shutter gate with variations in depth was manufactured and delivered by FIT GATE. Each unit was manufactured as a single unit and assembled on-site. The front and back surfaces of each structure were aligned, creating a difference in depth. After the structure was installed, finishing work was carried out by the contractor. Although it is a simple gate, the difference in depth creates a spacious entrance and parking area. 【Case Overview】 ■ Dimensions: Approximately W8,700 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 13

FIT GATE Construction Example: Shutter Gate 13

The pipe shutter is installed in the factory and shipped. Installation work will be carried out after arrival at the site.

Here is an example of a shutter gate manufactured and delivered as a single unit. The pipe shutter was installed in the factory and shipped. It was transported using a 4-ton crane truck, and installation work was carried out after arriving at the site. After the frame was installed, the finishing work was done by the contractor, and a gray paint was applied to match the residence, resulting in a cool-looking gate. 【Case Overview】 ■ Dimensions: Approximately W6,090 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 14

FIT GATE Construction Example: Shutter Gate 14

Introduction of a case where the body setup was divided into two days, with approximately 3 to 4 hours of setup each day.

This is a case study of a shutter gate installed in a condominium, manufactured and delivered by FIT GATE. The installation of the structure was completed over two days, with approximately 3 to 4 hours of work each day. After the structure was installed, finishing work was carried out by the construction company, resulting in both buildings having a simple gate with a soft impression. [Case Overview] ■ Right side [Shutter Gate + Access Gate] - Approximately W7,370 × H3,075mm (at the highest point) - Effective opening of the shutter: Approximately W5,500 × H2,300mm ■ Left side [Shutter Gate] - Approximately W5,790 × H3,075mm - Effective opening of the shutter: W5,200 × H2,300mm *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 16

FIT GATE Construction Example: Shutter Gate 16

Introduction of a case where delivery was made directly to the site with one unit and installation was completed in a short time of about 2 hours.

We manufactured and delivered a FIT GATE to a private residence in a certain location in Tokyo. We installed the shutter in the factory and delivered a semi-finished structure with the base prepared as a single unit directly to the site, completing the installation in about two hours. After the structure was installed, the contractor carried out the finishing work, and the gate was completed. [Case Overview] ■ Dimensions: Approximately W5,850 × H2,925 mm (Effective opening of the shutter: W5,260 × H2,300 mm) ■ Installation time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: General gate + shutter gate (private residence)

FIT GATE construction example: General gate + shutter gate (private residence)

By unifying the height, a sense of unity is enhanced, creating an entrance that exudes a luxurious feel with the striking contrast of white and wood grain!

We would like to introduce a case where a gate and shutter gate were delivered to a private residence in Aichi Prefecture. Due to the large size of the gate, a split structure combining FIT GATE and FIT HIGH-WALL was manufactured, and connection work was carried out on-site. After the structure was installed, the contractor performed finishing work such as the installation of vertical bars, gates, beams, and wall finishing. 【Case Overview】 ■ Dimensions: Approximately W11,285 × H2,925 mm ■ Installation Time: Approximately 6 hours ■ Adjustments made to the position of the steel base ■ Reinforcement added to the substrate *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: General door + shutter gate 6

FIT GATE construction example: General door + shutter gate 6

Due to the large body, it is manufactured in parts! Electrical wiring for delivery boxes and lighting is installed in the factory.

We would like to introduce a case where a gate that integrates a general-purpose door and a shutter gate was manufactured and delivered by FIT GATE. Due to the large structure, it was manufactured in sections and delivered using two 4-ton unic trucks. Downlights provided by the client were installed on the protruding part of the shutter gate beam and the general-purpose door. Electrical wiring for delivery boxes and lighting was installed in the factory, and after the structure was set up, finishing work such as tiling was carried out by the construction company, completing the project. 【Case Overview】 ■ Dimensions: Approximately W9,300 (total length) × H2,925 mm (at the highest point) ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: General door + shutter gate 9

FIT GATE construction example: General door + shutter gate 9

Designed with modifications for fireproof areas, ensuring that the columns do not interfere with the steel frame base!

We would like to introduce a case where we manufactured and delivered a combination of a passage gate and a shutter gate at FIT GATE. Due to limited depth dimensions from the site to the residence, we adopted an exposed type shutter case and integrated the passage gate and shutter gate to create a smart gate. After the installation of the structure, the contractor completed the wall finishing, resulting in a gate that harmonizes with the residence. [Case Overview] ■ Dimensions: Approximately W7,250 × H3,115 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: General door + shutter gate 10

FIT GATE construction example: General door + shutter gate 10

The shutter gate is manufactured as a case exposure type! The roof of the entrance section is designed with GL steel plate roofing.

We would like to introduce a case where we manufactured and delivered a passage gate and shutter gate at FIT GATE. The passage gate and shutter gate were designed to fit within the height of the residential eaves and were manufactured and delivered as one unit. After the structural installation, finishing work was carried out by the contractor, and tiles were applied to the wall, making the bright color of the wood-grain shutter stand out beautifully. 【Case Overview】 ■ Dimensions: Approximately W6,050 × H2,635 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: General Door + Shutter Gate 17

FIT GATE Construction Example: General Door + Shutter Gate 17

A case where a design was requested to change the height of the shutter gate and the service entrance, as well as the eaves projection!

Here is a case study of the manufacturing and delivery of a passage gate and shutter gate at FIT GATE. A groove was processed on the ceiling of the passage gate to prevent rainwater from flowing inside. After the installation of the structure, the contractor completed the finishing work. The finishing materials and colors of the passage gate and shutter gate were differentiated, resulting in a simple and stylish gate that harmonizes with the residential area. [Case Overview] ■ Dimensions - Shutter Gate: Approximately W6,100 × H2,925 mm (Effective opening: W5,510 × H2,300 mm) - Passage Gate: Approximately W4,100 × H2,575 mm *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: Shutter gate for a residential development.

FIT GATE construction example: Shutter gate for a residential development.

The left side is an elegant entrance, while the right side features a sharp entrance design!

Here is an example of three shutter gates connected in a row at a residential development in Aichi Prefecture. The gates were manufactured in sections and assembled on-site. By varying the finishing work, we achieved a sense of unity while creating gates with distinct impressions. Additionally, although the design of the two gates side by side is the same, changes in the exterior design resulted in the left gate having an elegant appearance and the right gate having a sharp look. [Case Overview] ■ Dimensions: Approximately W5,800 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.