更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
31～42 件を表示 ／ 全 42 件
Ultra-small CMOS camera with a diameter of φ5.5mm. There is also a type with LED lighting (4 units).
Equipped with a CCIQ imaging sensor (646×496 pixels 1/8" CMOS) that has CCD-like image quality. Built-in controller allows direct extraction of video signals from the camera (cable length up to 30m). Recording and power supply are possible by connecting to a separately sold digital recorder. IP67 waterproof specification.
This is a compact camera with a VGA resolution that uses CXP for its interface and has a size of 29mm square.
Despite its compact size of 29mm square, the device is capable of image transfer at 523fps (CXP3, 8bit). Additionally, it features global trigger shutter operation, the ability to select target screen areas through ROI functionality, external trigger, defective pixel correction, and PoCXP, making it suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign object and appearance inspection, robot vision, and drone-mounted applications.
This is a compact camera with a 29mm square size that supports global shutter operation, allowing image transfer at a maximum of 538fps. It is suitable for inspection applications and similar uses.
The body is compact at 29mm square size, yet capable of image transfer at 538fps (during 3tap). Additionally, it supports global trigger shutter operation, allows for the selection of the target screen area through the ROI function to speed up image output, and includes features such as defective pixel correction. It is suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign matter and appearance inspection, robot vision, and drone-mounted uses. The Camera Link interface, unlike traditional digital output cameras, has standardized connectors, pin assignments, and cables as part of the Camera Link specification, making cable availability and handling easier. Currently, Camera Link is the most trusted and proven interface in use.
An industrial camera that enables high frame rates and long-distance transmission by using CXP in the interface.
The housing is compact, measuring 29mm in size, making it suitable for integration into other machines. Additionally, with global trigger shutter operation, it allows for image transfer at 85fps when using CXP-3 (8bit/10bit), enabling clear capture of objects flowing on the line, such as PCBs, food and pharmaceuticals, and tiny components. Its advantages of long cable length (up to about 100m with CXP1 and up to about 40m with CXP3) and being small and lightweight also make it promising for applications in robot vision and drone mounting. Furthermore, by incorporating features such as external trigger, long-distance transmission, ROI, subsampling, defective pixel correction, shading correction, and PoCXP, it enhances the visibility of the desired parts of the objects, contributing to improved inspection efficiency. For detailed specifications, please contact our sales department.
It is an industrial camera that enables high frame rates and long-distance transmission by using CXP in the interface.
The body is compact, measuring 29×29×55mm, making it suitable for integration into other machines. Additionally, with global trigger shutter operation, it enables high-speed image transfer at 239fps in CXP-6/8bit, allowing for clear capture of objects flowing on the line, such as PCBs, food and pharmaceuticals, and tiny components. Furthermore, taking advantage of its cable length and lightweight design, it is expected to be applied in creating VR/AR data by capturing subjects from 360° angles and synthesizing the data, as well as in robot vision and drone-mounted applications. Moreover, by incorporating features such as external trigger, long-distance transmission, ROI (only in the vertical direction), 2×2 binning (monochrome type only), defective pixel correction, and PoCXP, it enhances visibility of the desired parts of the objects, contributing to improved inspection efficiency. For detailed specifications, please contact our sales department.
It is a compact camera with a 29mm square size, featuring SXGA resolution, using CoaXPress for the interface, and equipped with a Sony CMOS sensor.
Despite its compact size of 29mm square, the housing enables the fastest image transfer of 276fps (at 8bit) among our SXGA cameras. Additionally, it features global trigger shutter operation, the ability to select the target screen area through ROI functionality, external trigger, horizontal and vertical inversion, defective pixel correction, shading correction, gain settings, gamma correction, and PoCXP, making it suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign matter and appearance inspection, robot vision, and drone-mounted applications.
Inspection devices, usable for security purposes, are compact and high-speed cameras capable of long-distance transmission at 5.3M/2M.
★ High resolution, compact, and lightweight size CMOS sensor, size W29×H29×D55mm. ★ Interface CoaxPress (CXP6×1 lane) Video output BNC connector. Capable of long-distance transmission. ★ Achieving high resolution and high frame rate With CoaxPress output, up to 5.3 million pixels/85fps (CXP5, CXP6) and 2.03 million pixels/239fps (CXP6, 8bit). ★ Equipped with functions necessary for FA applications Global trigger shutter operation is possible, ROI function allows selection of the target image area, defective pixel correction, PoCXP, etc. Available in monochrome (M), color model (R), and NIR (near-infrared) specifications. * The NIR model is only available for VCC-5CXP3.
This is a compact 29mm camera that supports global shutter operation and can transfer images at a maximum of 152fps, making it suitable for inspection applications.
The body is compact with a size of 29mm square, yet it is capable of image transfer at 152fps (during 3-tap). Additionally, it supports global trigger shutter operation, allows for the selection of the target screen area through the ROI function to accelerate image output, and includes features such as defective pixel correction. It is suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign matter and appearance inspection, robot vision, and drone-mounted uses. The Camera Link interface, unlike traditional digital output cameras, has standardized connectors, pin assignments, and cables through collaboration between camera manufacturers and board manufacturers, making cable availability and handling easier. Currently, Camera Link is recognized as the most reliable and proven interface.
Industrial camera capable of high frame rates and long-distance transmission by using CXP in the interface.
Equipped with a global shutter CMOS sensor, it features functions such as external trigger, ROI, defective pixel correction, sequence control, and shading correction, making it suitable for machine vision applications. Additionally, for customers who find it difficult to introduce expensive infrared cameras as production equipment necessary for high-sensitivity imaging in the near-infrared range, CIS also offers the VCC-5CXP3NIR (near-infrared model) equipped with a CMOS sensor that enhances sensitivity to near-infrared. This allows for imaging of areas that are difficult to confirm visually, leveraging the transparency of near-infrared wavelengths, and enables more precise imaging.
A high-resolution 24M CoaXPress camera equipped with a Sony IMX540 sensor, compact in size at 29x29x55mm. It includes the necessary features for factory automation applications.
Equipped with a SONY 4th generation global shutter CMOS sensor that excels in image quality and performance. Despite its compact size of 29(W)×29(H)×55(D)mm, it can output 24 million pixels at approximately 21.9fps (8bit). It includes various features suitable for machine vision applications, such as external trigger, long-distance transmission, ROI, defective pixel correction, shading correction, gain, gamma correction, and PoCXP. Additionally, data transmission, camera control, and power supply can be achieved through a single coaxial cable, contributing to space-saving and cost-effective solutions even when using multiple cameras.
We will introduce a portable, compact camera that is suitable for the scene!
Compact cameras are lightweight and high-quality, making them easy to carry. They are versatile for a wide range of uses, from personal to business, but many people may find it difficult to choose a model that suits their needs. In this article, we will introduce recommended portable compact cameras by different scenes. Use this as a hint to find the perfect one for your daily life or work. For those considering use in work environments like construction sites, we recommend the "G-POKE" mini camera from MIYOSHI Corporation. *You can view the detailed content of the column in the PDF. For more information, please feel free to contact us.*
