Supported materialsのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Supported materials - メーカー・企業4社の製品一覧とランキング

Supported materialsの製品一覧

16～30 件を表示 ／ 全 38 件

表示件数
3D printing compatible material 'ULTEM1010 | FDM'

3D printing compatible material 'ULTEM1010 | FDM'

An FDM material with high heat resistance and the lowest thermal expansion coefficient among FDM materials, possessing the highest level of strength.

The material called ULTEM1010, which is outputted with F9F900, has high heat resistance and exhibits the lowest thermal expansion coefficient among FDM materials, making it a top-level strength FDM material. It complies with industry standards for biocompatibility according to ISO 10993 and USP Class VI, as well as NSF 51 food safety requirements. It is printed with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch. *If the above certifications are required, we will guide you to the certified grade of FDM material called ULTEM1010 CG. Please indicate that compliance with various standards is necessary when inquiring.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Antero800NA | FDM'

3D printing compatible material 'Antero800NA | FDM'

In addition to toughness and wear resistance, it has features such as high strength, high heat resistance, low gas emission characteristics, and excellent chemical resistance!

The material Antero 800NA, produced with the F900, is a PEKK-based material suitable for applications that require high durability and weight reduction. It features toughness and wear resistance, as well as high strength, high heat resistance, low gas emission characteristics, and excellent chemical resistance. It is built with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Brochure Giveaway! Joint-supporting material 'Green Abalone' that works on the joints.

Brochure Giveaway! Joint-supporting material 'Green Abalone' that works on the joints.

New Zealand's "green-lipped mussels" are rich not only in the three major nutrients but also in minerals. They contain essential components for healthy joints.

It is said that the Maori people of New Zealand have very few cases of arthritis or rheumatism, and there is a song that has been passed down stating, "If you eat green-lipped mussels, the pain will disappear." Research on the application of green-lipped mussels for arthritis began in the 1970s, and now there are many research presentations and papers available. Here is a simple explanation of green-lipped mussels. [Content] ■ Explanation of the mechanism of joint pain ■ Introduction of the components and effects of green-lipped mussels ■ Checklist for joint health *For more details, please download the PDF or feel free to contact us.

  • Food/beverage functional materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material "Full Color Acrylic"

3D printing compatible material "Full Color Acrylic"

Due to the high strength of the material itself, tapping and secondary processing are also possible! A material suitable for figures and miniatures.

Introducing "Full Color Acrylic," a selectable material for 3D printing. This material is suitable for creating figures and miniatures through 3D printing. The shaping method used is full-color UV-curable inkjet. It allows for vibrant full-color modeling with over 10 million colors (600×300×800dpi). Compared to gypsum full color, it excels in reproducing fine designs and allows for flexible expressions. Additionally, secondary processing such as threading and tapping can be performed. 【Features】 ■ Material suitable for figures and miniatures ■ Shaping method: Full-color UV-curable inkjet ■ Excellent reproduction of fine designs ■ Flexible expressions possible ■ Use Cases It is widely used as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for shaping small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Titanium'

3D printing compatible material 'Titanium'

It is possible to create shapes with the strength of metal parts! A material suitable for the production of parts and design items.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce 'Titanium,' one of the selectable materials for 3D printing. It possesses the general material characteristics of titanium, allowing for post-processing, making it ideal for many applications, including aerospace and medical fields. Although titanium is a difficult metal to machine, 3D printing allows for high design freedom and mass production. It is built with a layer pitch of 0.03mm. Tests conducted in compliance with the following standards have passed: - REACH - RoHS Additionally, DMM.make can provide examples of cases where mass production has been achieved without using molds, utilizing 3D printing technology. For more details, please check the materials or contact us using the information provided within the materials.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material "Brass"

3D printing compatible material "Brass"

Casting brass using a 3D printed model as a mold! A material suitable for making accessories.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds without 3D printers to the creation of prototypes. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce "brass," one of the selectable materials for 3D printing. This material is suitable for creating accessories through 3D printing. The tips of shapes can be reproduced to a minimum width of about 0.8mm. We create a mold from the 3D printed model and cast brass. We use brass materials that are actually utilized in accessories. [Features] - Material suitable for the production of accessories - Casting brass using a mold made from a 3D printed model (lost-wax method) - Uses brass materials that are actually used in accessories [Usage Examples] We utilize 3D CAD data for a wide range of applications, including extrusion molding, casting, machining, as an alternative method for injection molding, molds, and formwork, as well as for molding small parts for IoT products and finished goods.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'MJF'

3D printing compatible material 'MJF'

For small to medium lot production! It is possible to achieve strength that can withstand practical use without introducing anisotropy in the manufactured products.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce 'MJF,' one of the selectable materials for 3D printing. This material has strength approaching that of injection molding. Additionally, it does not require molds, eliminating mold costs. You can choose from four materials: "PA12," its reinforced version "PA12GB," the very flexible "PA11," and the weather-resistant white "PA12W." 【Features】 ■ Capable of outputting small items ■ Multi Jet Fusion technology ■ Strength approaching that of injection molding ■ No molds required ■ No mold costs ■ Suitable for small to medium lot production ■ Use Cases Utilized in a wide range of applications as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for molding small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material "AGILISTA"

3D printing compatible material "AGILISTA"

It can produce waterproof packing structures in one go, making it usable for various applications from mock-ups and prototypes to maintenance parts.

DMM.make 3D Printing Service provides comprehensive support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. This page introduces 'AGILISTA,' a selectable material for 3D printing. This material features a layer pitch of 20-30μm and includes four types of resins suitable for mock-ups. You can choose from transparent resins with excellent toughness and rigidity, high heat-resistant resins, low-hardness silicone rubber, and high-hardness options, depending on your application. 【Features】 ■ Capable of outputting small items ■ One-shot output for waterproof gasket structures ■ Layer pitch of 20-30μm ■ Four types suitable for mock-ups available ■ Use Cases We utilize 3D CAD data for a wide range of applications, including extrusion molding, casting, machining, and as alternative methods for injection molding, molds, and formwork, as well as for forming small parts for IoT products and finished goods.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Stainless Steel (SUS316L)'

3D printing compatible material 'Stainless Steel (SUS316L)'

Layered manufacturing with high-precision binder jetting! Capable of creating high-precision metal products through sintering.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce the selectable 3D printing material 'Stainless Steel (SUS316L)'. This material is capable of producing strong and high-precision metal products through layered construction using a high-precision binder jetting method, followed by sintering. The color is gray silver, which exhibits a metallic luster when polished. 【Features】 ■ Capable of outputting small items ■ Can produce strong and high-precision metal products Additionally, DMM.make can provide examples of achieving mass production without using molds by utilizing 3D printing technology. For more details, please check the materials or contact us using the information provided within the materials.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Agilus Rubber'

3D printing compatible material 'Agilus Rubber'

A material suitable for a wide range of applications that require a soft shape. It can output materials of different hardness in one go.

DMM.make 3D Printing Service provides total support for various manufacturing processes, from mass production assistance using molds without 3D printers to the creation of prototypes. We offer a wide range of materials, from those boasting strength comparable to injection molding to soft materials like rubber and silicone. On this page, we introduce 'Agilus Rubber,' one of the selectable materials for 3D printing. This material is a new rubber-like substance suitable for a wide range of applications that require soft shapes. Its Shore hardness is A30-35. Additionally, it can be used for surfaces that require anti-slip properties. The printing method is PolyJet, resulting in a smooth surface. 【Features】 ■ Capable of outputting small items ■ Shore hardness ranges from A30-90 ■ Usable for surfaces requiring anti-slip properties ■ The PolyJet printing method results in a smooth surface ■ Use Cases It is utilized in a wide range of applications, including as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for shaping small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Silver | Casting'

3D printing compatible material 'Silver | Casting'

A mold will be created based on 3D printed casting wax, and silver (SV925) will be cast.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds made with 3D printers to the creation of prototypes. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce the selectable material for 3D printing, 'Silver | Casting.' This material is used to cast the 3D printed model into a mold, using silver materials that are actually utilized in accessories and other products. The tip of the shape can be reproduced to a minimum width of approximately 0.8mm. 【Features】 ■ Capable of outputting small items ■ Uses silver materials that are actually used in accessories Additionally, DMM.make can provide examples of cases where 3D printing technology has been utilized to achieve mass production without the use of molds. ■ Usage Examples 3D CAD data is used for a wide range of applications, including extrusion molding, casting, machining, and as alternative methods for injection molding, molds, and formwork, as well as for shaping small parts of IoT products and finished goods.

  • Contract manufacturing

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material "High-Precision Ceramic-Like" LumiaX1

3D printing compatible material "High-Precision Ceramic-Like" LumiaX1

It features a smooth surface finish, heat resistance up to a load deflection temperature (0.45MPa) of 280°C, exceptional rigidity, excellent chemical resistance, and electrical insulation properties.

We use a cutting-edge 3D printing technology that combines multiple patented techniques known as HPS molding methods. Ultracur3D(R)RG 3280 has a Young's modulus exceeding 10,000 MPa, allowing it to withstand significant forces without yielding, resulting in excellent load-bearing capacity. These features make it suitable for applications in industries exposed to extreme thermal environments, such as aerospace, automotive, and electronics. Due to its excellent dimensional stability and resistance to deformation, it has a proven track record of injecting 300 parts as an injection mold for resin molding. The resin used for injection can be molded from thermoplastics such as ABS, PP, PC, and TPE. In the case of using injection molds, it may be difficult to remove the model depending on its design, so we recommend using a release agent. At DMM.make, we typically deliver with supports, but by selecting the "removal available" option, we can deliver without supports. By curing the material, the load deflection temperature (1.82 MPa) can be improved to a range of 132°C to 162°C. There is no change in the load deflection temperature (0.45 MPa) due to thermal curing.

  • 3D Printer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Stainless Steel | SLM'

3D printing compatible material 'Stainless Steel | SLM'

Due to its high tensile strength, heat resistance, and corrosion resistance, it can be used for various applications.

It is a stainless steel material called SUS316L. Due to its high tensile strength, excellent heat resistance, and corrosion resistance, it can be used for various applications. In 3D printing, it offers greater design freedom compared to traditional methods and is also suitable for mass production. It is built with a layer pitch of 0.04mm.

  • stainless

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material "High-Precision Plastic"

3D printing compatible material "High-Precision Plastic"

Capable of reproducing high-precision and sharp edges! Suitable for drilling, tapping, and machining, and can also be used as parts for final products! Ideal for jigs!

This is a material called VisiJet(R) M2R-TN, produced using the ProJet(R) MJP 2500 Plus. It is built with a layer pitch of 32μm, allowing for high precision and sharp edge reproduction. Additionally, it features a smooth surface finish, making it suitable for painting and ideal for detailed railway model applications. In terms of mechanical properties, it is a plastic with excellent rigidity, capable of being drilled, tapped, and machined, and can also be used as parts for final products. The high-definition plastic has an ochre base color, but please note that areas where supports are attached will turn white due to support removal. Tests have been conducted in compliance with the following standards, and they have passed: USP Class VI.

  • plastic

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'PA12GB Glass Beads | MJF'

3D printing compatible material 'PA12GB Glass Beads | MJF'

This is a nylon material that can be used in scenes where greater strength is required, as it contains glass beads.

This is a nylon material suitable for mass production that contains glass beads called HP 3D High Reusability PA 12 Glass Beads, made with the HP Jret Fusion 4200. The MJF method has no anisotropy compared to the SLS method, offering high strength and dimensional accuracy, making it usable from prototypes to final products. The inclusion of glass beads allows it to be utilized in scenarios where higher strength is required. It is built with a layer pitch of 0.08mm. Tests have been conducted in compliance with the following standards and have passed: - REACH - RoHS - PAHs

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Supported materialsの関連カテゴリ

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.