Ultrasonic Cleanerのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Ultrasonic Cleaner - メーカー・企業144社の製品一覧とランキング

更新日： 集計期間:Jan 14, 2026～Feb 10, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Ultrasonic Cleanerのメーカー・企業ランキング

更新日： 集計期間:Jan 14, 2026～Feb 10, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 日本エマソン株式会社　ブランソン事業本部 Kanagawa//Industrial Machinery
  2. THE CREO CO., LTD. Tokyo//others
  3. Eプラン Chiba//Industrial Machinery
  4. 4 日本精機製作所 本社 Tokyo//Industrial Machinery
  5. 4 新科産業 Kanagawa//Testing, Analysis and Measurement
企業ランキングへ

Ultrasonic Cleanerの製品ランキング

更新日： 集計期間:Jan 14, 2026～Feb 10, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. July 2023: Free Ultrasonic Cleaning Seminar held in Kariya, Fukuoka, and Kumamoto. 日本エマソン株式会社　ブランソン事業本部
  2. Container washing and dewatering machine [Labor-saving and CO2 reduction. Can be combined with robots!] THE CREO CO., LTD.
  3. SAIW Ultrasonic Cleaner Eプラン
  4. 4 Ultrasonic Cleaner "GCX Series" 日本エマソン株式会社　ブランソン事業本部
  5. 5 Tabletop Ultrasonic Cleaner "Blansonic" 日本エマソン株式会社　ブランソン事業本部

Ultrasonic Cleanerの製品一覧

391～420 件を表示 ／ 全 439 件

表示件数
[Video] University of Tokyo. What are they doing? 'Secrets of Researchers Series #1-1'

[Video] University of Tokyo. What are they doing? 'Secrets of Researchers Series #1-1'

Interview with Yokoyama Laboratory at the Center for High-Resolution Environmental Analysis, Atmosphere and Ocean Research Institute, University of Tokyo - Yamato Science x Japan Emerson!

Amazing as expected! University of Tokyo Research Lab! Playing with the Earth?! "Climate Change," "Earth Science," "Environmental Restoration" Tracing the traces of the Earth and unraveling history. A close look at a lab that studies daily occurrences that will happen in the future. ~ Researcher Secrets Series #1-1 ~ Yokoyama Lab, Center for High-Resolution Environmental Analysis, Atmosphere and Ocean Research Institute, University of Tokyo ↓ You can watch the video below ↓

  • Other physicochemical equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Video] Peek into the Minds of Researchers: 'Secrets of Researchers Series #1-2'

[Video] Peek into the Minds of Researchers: 'Secrets of Researchers Series #1-2'

Interview with Yokoyama Laboratory at the Center for High-Resolution Environmental Analysis, Atmosphere and Ocean Research Institute, University of Tokyo, by Yamato Science x Japan Emerson!

Amazing as expected! University of Tokyo Research Laboratory! Playing with the Earth?! "Climate Change," "Earth Science," "Environmental Restoration" Tracing the traces of the Earth and unraveling history. A close look at a laboratory that researches daily events that will occur in the future. ~ Researcher Secrets Series #1-2 ~ Yokoyama Laboratory, Center for High-Resolution Environmental Analysis, Atmosphere and Ocean Research Institute, University of Tokyo ↓ You can watch the video below ↓

  • Other physicochemical equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Video] University of Tokyo. What are they doing? 'Secrets of Researchers Series #1-4'

[Video] University of Tokyo. What are they doing? 'Secrets of Researchers Series #1-4'

[Yamato Science x Japan Emerson] Professor! What are the analytical methods and instruments that unravel the "Why of the Earth"? <Tokyo University Atmosphere and Ocean Research Institute, Yokoyama Laboratory>

The key to unraveling the "whys" of the Earth! Introducing cutting-edge analytical methods and instruments. Playing with the Earth?! "Climate Change," "Earth Science," "Environmental Restoration" - tracing the Earth's traces and unraveling history. A close look at a research lab that studies daily occurrences. ~ Researcher Secrets Series #1-4 ~ Yokoyama Laboratory, Center for High-Resolution Environmental Analysis, Atmosphere and Ocean Research Institute, University of Tokyo ↓ You can watch the video below ↓

  • Other physicochemical equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Video] University of Tokyo. What are they doing? 'Secrets of Researchers Series #1-5'

[Video] University of Tokyo. What are they doing? 'Secrets of Researchers Series #1-5'

[Yamato Science x Japan Emerson] A Global Breakthrough! Uncovering the Secrets Behind the Ongoing Achievements of "Why Earth?" <Research by Yokoyama at the University of Tokyo's Atmosphere and Ocean Research Institute>

A Discovery of the World!? The Secrets of a Research Laboratory That Continues to Produce Results Through Global Research. Gathering aspiring researchers from around the world, the reality of a laboratory that operates on a global scale. In about six minutes, we delve into the secrets and attractions of the Yokoyama Laboratory. Playing with the Earth?! "Climate Change," "Earth Science," "Environmental Restoration" - tracing the Earth's traces and unraveling history. We closely follow a laboratory that conducts daily research on upcoming phenomena. ~ Researcher Secrets Series #1-5 ~ Yokoyama Laboratory, Center for High-Resolution Environmental Analysis, Atmosphere and Ocean Research Institute, The University of Tokyo ↓ You can watch the video below ↓

  • Other physicochemical equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-frequency ultrasonic cleaning machine 'N9000 Series'

High-frequency ultrasonic cleaning machine 'N9000 Series'

A high-frequency ultrasonic cleaner that enables more productive cleaning with a variety of output settings!

The "N9000 Series" is a next-generation high-frequency ultrasonic cleaning machine designed for ultra-precision cleaning to remove sub-micron particles. It vibrates water molecules at an acceleration of approximately 100,000G (for 1MHz/730kHz), using that force to detach particles from the items being cleaned. The ultrasonic transducers to be connected are individually designed and manufactured according to the size and specifications of the cleaning tank. 【Features】 ■ High watt density ■ Easy and versatile output settings to improve productivity ■ Simple setup and enhanced work efficiency ■ User-friendly interface ■ Capable of global compatibility *For more details, please refer to the PDF document or feel free to contact us.

  • Ultrasonic Cleaner
  • Other physicochemical equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultrasonic Cleaner "GCX Series"

Ultrasonic Cleaner "GCX Series"

The evolved GCX technology enables more efficient cleaning.

Emerson's Branson GCX ultrasonic generator features user-friendly digital control, high performance, and a more compact size, accurately controlling the supply of ultrasonic energy to precision cleaning systems. The touch screen (HMI) of the GCX generator allows for a wider range of precise digital settings compared to traditional analog or push-button technologies. It can also vary cavitation intensity from 20% to 100%, and includes a sweep function for frequency modulation and a power modulation mode for adjusting power. Additionally, it offers a wide range of oscillators across various frequency bands to accommodate a broad spectrum of cleaning applications. 【Features】 ■ Stable output ■ Achieves more uniform cleaning with sweep mode ■ Generates optimal ultrasound even with load fluctuations due to changes in liquid level and temperature ■ Maintains the optimal operating frequency for applications through automatic adjustment ■ Remote operation capability ■ Safety and error detection functions

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
July 2023: Free Ultrasonic Cleaning Seminar held in Kariya, Fukuoka, and Kumamoto.

July 2023: Free Ultrasonic Cleaning Seminar held in Kariya, Fukuoka, and Kumamoto.

I will explain the principles and applications of ultrasonic cleaning, which is widely used for cleaning semiconductor-related components.

We will be holding free technical seminars on "ultrasonic cleaning and ultrasonic liquid treatment" at the following locations: Aichi Prefecture (in front of Kariya Station), Fukuoka Prefecture (in front of Hakata Station), and Kumamoto Prefecture (in front of Kumamoto Station). The seminar will cover various technologies, including ultrasonic cleaning, which is widely used in fields such as semiconductor-related components, electronic components, glass and lens components, and metal parts, explaining the principles and application examples. 【Recommended for the following individuals】 ■ Those interested in ultrasonic cleaning technology or considering a change in methods ■ Those looking to improve cleaning quality ■ Those exploring new cleaning technologies and considering means or methods Please register for the seminar using the URL below.

  • 技術セミナー.JPG
  • Technical Seminar
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultrasonic Cleaner 'UV-C'

Ultrasonic Cleaner 'UV-C'

In addition to the cleaning effect of ultrasonic waves, it demonstrates powerful effectiveness in removing viruses and bacteria with its high sterilization effect!

The "UV-C" is an ultrasonic cleaning device that decomposes various types of dirt and effectively targets bacteria, viruses, and germs using UV-C light. It features simple touch controls for easy operation. While regular tap water can be used as a solvent, using the appropriate cleaning agent based on the items being cleaned and the type of dirt can enhance the cleaning effect. 【Features】 ■ Decomposes various types of dirt ■ Effective against bacteria, viruses, and germs ■ The cleaning tank has a substantial capacity of 650ml and powerful ultrasonic capabilities at 40,000Hz ■ Exceptional sterilization effect with a 253mm UVC light ■ Simple touch operation, etc. *For more details, please download the PDF or feel free to contact us.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low damage, high cleaning ultrasonic cleaner.

Low damage, high cleaning ultrasonic cleaner.

Advanced ultrasonic cleaning technology racing through the semiconductor supercycle!

By effectively combining the three elements of chemical force, physical force, and temperature, the cleaning effect can be maximized, achieving improvements in quality, reduced cleaning time, and increased production efficiency. ● High performance and high reliability for long-term stable operation ● Fine and uniform cleaning to enhance productivity ● Environmentally friendly with energy-saving and compact design *For more details, please contact us or download the PDF document to view.

  • Ultrasonic Cleaner
  • Other cleaning machines
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Eco-recycling of solvents for low consumption! Vacuum ultrasonic cleaning device.

Eco-recycling of solvents for low consumption! Vacuum ultrasonic cleaning device.

Incredible cleaning power by generating ultrasound in a vacuum! Purity at a precision cleaning level.

The vacuum ultrasonic cleaning device generates astonishing cleaning power by emitting ultrasonic waves under vacuum conditions. It automatically replaces the cleaning solution and performs a "two-step cleaning" with rough cleaning and final cleaning. Rinsing is done with steam cleaning, ensuring a perfect finish. 【Features】 ■ By using a hexagonal barrel-type rotating basket, it demonstrates its effectiveness in cleaning parts with many gaps or overlapping components. ■ Despite its compact size, it comes standard with a built-in distillation regeneration device. ■ Its compact design and low working position make it easy to operate. *For more details, please contact us or download the PDF for more information.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
11-tank ultrasonic cleaning device for optical lenses '11WUC-S015'

11-tank ultrasonic cleaning device for optical lenses '11WUC-S015'

Cleaning of soft glass materials with a wear level of 400 or higher from general glass materials! An ultrasonic cleaning device capable of a wide range of cleaning is available. *Samples of the "acetone alternative" cleaning agent are currently being offered!

The "11WUC-S015" is an 11-tank ultrasonic cleaning device compatible with various optical glass lenses. Powerful ultrasonic waves spread uniformly throughout the cleaning tank with spherical wave vibrations, preventing cleaning inconsistencies. It can clean high-wear soft glass materials and blue glass with gentle vibrations that are lens-friendly. It is equipped with two drying systems: clean warm air drying after drawing up pure water and paper drying using various solvents, allowing for drying tailored to different glass materials. 【Features】 ■ Compatible with various optical glass lenses ■ Can also clean lenses with black paint, such as GT-7 ■ High-performance ultrasonic generator ■ Multi-drying system ★ A cleaning agent "IC-09" that can replace acetone is also available for sale ★ * Free samples are currently being offered. * For more details, please refer to the PDF materials or feel free to contact us.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Preform glass lens molding ultrasonic cleaning device

Preform glass lens molding ultrasonic cleaning device

Gentle vibrations for the lens! Introducing an ultrasonic generator that makes it difficult to produce subsurface defects! *Currently offering samples of "acetone alternative" cleaning agents!

This product is a dedicated cleaning device for removing stains before molding. It can simultaneously clean particles and organic contaminants that have adhered from the outside. With spherical wave vibration, powerful ultrasonic waves spread efficiently and uniformly throughout the cleaning tank. The vibrations are gentle on lenses, making it less likely to cause hidden damage, and it can be used safely regardless of the type of glass. Additionally, the ultrasonic output and frequency can be automatically controlled according to the type of glass. 【Features】 ■ Simultaneously cleans particles and organic contaminants that have adhered from the outside ■ Choose from various drying methods ・ Vapor drying method using IPA replacement (IPA and HFE/HFC, etc.) ・ Vacuum suction drying method ■ Powerful ultrasonic waves spread efficiently and uniformly throughout the cleaning tank with spherical wave vibration ■ Ultrasonic output and frequency can be automatically controlled according to the type of glass ★ A cleaning agent that can replace acetone, 'IC-09', is also available for sale ★ * Free samples are also being offered * For more details, please refer to the PDF document or feel free to contact us.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Proposal for Wet Shower Cleaning of Resin Molded Products

Proposal for Wet Shower Cleaning of Resin Molded Products

Customization of each device is possible according to customer needs! You can achieve stable quality after cleaning! *Currently offering samples of "acetone alternative" cleaning agents!

"Wet Shower Cleaning for Resin Molding Products" removes particles and performs degreasing cleaning of resin molded products using only warm water showers, without the use of cleaning agents. The cleaning is done with a pressure washing shower at 0.3 to 0.5 MPa, and a special air nozzle is used in the drying process to effectively remove water, allowing for drying of the workpieces without the use of hot air drying. Customization of each device is possible according to customer needs. 【Benefits of Equipment Introduction】 ■ Since cleaning is done only with warm water (aqueous), there are no costs for cleaning agents, etc. ■ Removed particles are collected through filtering. ■ Water removal after showering reduces the occurrence of drying stains. ■ Automating the cleaning process reduces labor costs and ensures stable quality after cleaning. ★ A cleaning agent that can replace acetone, "IC-09," is also available for sale. ★ * Free samples are also being offered. * For more details, please refer to the PDF document or feel free to contact us.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single-tank ultrasonic cleaning device "Soniclean"

Single-tank ultrasonic cleaning device "Soniclean"

Long hours of driving are possible! The interior and exterior mainly use robust and hygienic stainless steel SUS-304 material.

"Sonic Clean" is a compact and efficient cleaning device that integrates a fully transistorized ultrasonic oscillation unit developed uniquely by Sonic with a cleaning tank. The cleaning operation is completely unadjusted and requires only the flip of a switch. Additionally, thanks to the automatic output tracking system, it provides stable cleaning regardless of the size of the items being cleaned or the water level. It is used for a wide range of applications, from cleaning optical components to medical instruments. 【Features】 ■ Integration of the ultrasonic oscillation unit with the cleaning tank ■ Compact and lightweight ■ High conversion efficiency and excellent cleaning effect ■ Completely unadjusted cleaning operation with just a switch ■ Provides stable cleaning regardless of the size of the items or the water level *For more details, please refer to the PDF document or feel free to contact us.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Carbeck Ultrasonic Cleaner SONIC STAR

Carbeck Ultrasonic Cleaner SONIC STAR

Ultrasonic cleaners are extremely effective at removing dirt and abrasives that have entered narrow gaps!

Water is essential for ultrasonic cleaners, but this water contains components known as dissolved gases that are not visible to the eye. When tap water is poured into the tank, the dissolved gases are initially dispersed throughout the entire volume, but over time, the amount of dissolved gases at the bottom of the tank decreases due to the weight of the water. As the amount of disruptive gases for the ultrasound decreases, the cleaning efficiency improves. To stabilize the cleaning ability, the water poured into the tank is not used immediately; there is also a method that uses surfactants to evenly distribute the concentration of dissolved gases. However, we focused on eliminating the dissolved gases themselves. To forcibly remove dissolved gases from the water poured into the tank, we developed a microbubble generation device. As the water passes through this device, the dissolved gases are expelled as bubbles, much like wringing out a cloth. In this new product, the water in the tank is circulated by overflowing, and as it passes through the microbubble generation device installed along the path, the number of bubbles generated decreases significantly until the dissolved gases are reduced to a negligible state, at which point no bubbles are produced. Operating under these conditions eliminates factors that attenuate the ultrasound, allowing it to act directly on the items being cleaned, significantly improving cleaning efficiency.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultrasonic cleaner

Ultrasonic cleaner

We will introduce low-priced, high-quality products from around the world.

We will introduce products with a variety of tank capacities and ultrasonic output; please feel free to contact us for more details.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultrasonic Testing Imaging Device 'HA-60A'

Ultrasonic Testing Imaging Device 'HA-60A'

It is suitable for inspecting the internal structure and defects of various materials.

The "HA-60A" is an ultrasonic flaw detection imaging device that allows for easy defect judgment through simultaneous display of three modes (A, B, and C scopes). It can use high-performance polymer concave ultrasonic probes with frequencies suitable for the workpiece, allowing selection based on the material, dimensions, and defects of the test object. 【Features】 ■ A Scope - Understand the reflection sound pressure of abnormal areas and the depth from the detection surface. ■ B Scope (Cross-sectional Image) - Displays the distribution, presence, and depth of abnormal areas under the probe scanning line. ■ C Scope (Planar Image) - Enables judgment of flaws in flat objects such as plates based on the distribution of planar abnormalities. *For more details, please download the PDF or feel free to contact us.

  • Defect Inspection Equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultrasonic cleaner for optical fibers

Ultrasonic cleaner for optical fibers

You can easily perform a series of tasks such as covering removal, cleaning, cutting, and fusion!

We would like to introduce the "Ultrasonic Cleaner for Optical Fibers" handled by Seven Six Co., Ltd. This ultrasonic cleaner for optical fibers washes away coating removal debris without directly touching the fiber. By using a fiber holder, you can easily perform a series of tasks including coating removal, cleaning, cutting, and fusion. It allows for the setting of cleaning time and intensity. 【Features】 ■ Easy operation when combined with a fiber holder ■ Equipped with a timer ■ Adjustable cleaning intensity *For more details, please refer to the related links or feel free to contact us.

  • 7a.PNG
  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D Printer Support Material Removal Tool 'EXTRIPPER Series'

3D Printer Support Material Removal Tool 'EXTRIPPER Series'

Introducing a high-speed support material removal tool for inkjet 3D printers that is also environmentally friendly!

Are you a customer using the Projet MJP series 3D printers from 3D Systems, and do you have any concerns regarding the support material removal process? The "EXTRIPPER series" is a high-speed support material removal tool designed with consideration for the environment, specifically for inkjet 3D printers. We offer a lineup that includes the dedicated cleaning solution "EXTRIPPER JAM," the finishing cleaning solution "EXTRIPPER Beauty," and the dedicated devices "EXTRA-S" (for Jam) and "EXTRA-US" (for Beauty). 【Features】 ■ Significantly reduces support material removal time and labor while maintaining cleanliness ■ When used with your existing constant temperature bath and ultrasonic cleaner, most models can complete the support removal process quickly and cleanly ■ For hollow-shaped models, support material removal can be completed in about 30 minutes ■ Made with environmentally considerate ingredients, allowing for safe use *For more details, please refer to the PDF document or feel free to contact us.

  • Cleaning agents
  • 3D Printer
  • Printer
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Large parts can also be cleaned! Large ultrasonic cleaning machine [Contract Inspection]

Large parts can also be cleaned! Large ultrasonic cleaning machine [Contract Inspection]

We clean and remove invisible dirt contamination using ultrasonic waves. Suitable for large parts as well!

Our cleaning machine is equipped with a large ultrasonic cleaner to wash large products! It removes contaminants (particulate pollutants) such as chips after processing metal parts and surface contamination from products using ultrasonic waves. Ultrasonics enable cleaning in hard-to-reach and invisible areas. After cleaning and collecting contaminants, we will return the items sealed to prevent any dirt from adhering. We can accommodate various sizes of metal products such as aluminum parts and resin products. *Please feel free to contact us for more details.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultrasonic cleaning: Compatible with various work sizes and materials [Contract inspection]

Ultrasonic cleaning: Compatible with various work sizes and materials [Contract inspection]

You can set appropriate cleaning conditions according to the material and characteristics of the item!

A large cleaning tank with a capacity exceeding 4000L. It can accommodate work sizes up to a maximum of 1,100×1,100×1,000mm. It is suitable for cleaning various materials such as metal, plastic, and ceramics, and appropriate cleaning conditions can be set according to the material and characteristics of the items. 【Ultrasonic Oscillator Modes】 ■ Proximity Dual Frequency Switching (DUAL) ■ FM Oscillation (FM) ■ Single Frequency Oscillation (SINGLE) ■ Pulse Oscillation (PULSE) *For more details, please refer to the PDF document or feel free to contact us.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cleaning Unit "Fine Jet"

Cleaning Unit "Fine Jet"

Stable oscillation from low to high output to meet a wide range of needs for single-sheet cleaning!

The "Fine Jet" is a cleaning unit that allows for the selection of various frequencies. It meets a wide range of needs for single wafer cleaning with stable oscillation from low to high output. It is suitable for various applications such as cleaning wafer substrates, magnetic disks, and post-CMP cleaning of wafers. Additionally, there are various nozzle options available, including chemical resistance and metal contamination-free types. 【Features】 ■ Fine output adjustment: Stable output adjustment in 1W increments (PT-010J50) ■ Selection of various frequencies available (400kHz/1500kHz/3000kHz) ■ Variety of nozzle options: Chemical resistance, metal contamination-free ■ Enhanced detection function: Capable of detecting transducer degradation (PT-010J50) ■ Enhanced communication function: Monitoring of oscillator status and external settings (PT-010J50) *For more details, please download the PDF or feel free to contact us.

  • Other cleaning equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cleaning Unit "Fine Scroll"

Cleaning Unit "Fine Scroll"

Introduction of sheet and flat feeding cleaning tools for small substrates to large LCD panels!

"Fine Score" is a cleaning unit suitable for FPD substrate cleaning and various wafer substrate cleaning. The cleaning width ranges from 160mm to 2210mm, offering a detailed size variation. Additionally, the maximum output increase contributes to the expansion of the cleaning area and cost reduction. Please feel free to contact us if you have any inquiries. 【Features】 ■ Detailed size variation ■ Cleaning width ranges from 160mm to 2210mm ■ Fine output adjustment: stable output adjustment in 1W increments (PT-150MV) ■ Maximum output increase: expansion of the cleaning area and cost reduction ■ Communication functions: monitoring of oscillator status, external settings ■ Compliance with various standards (FCC, CE, RoHS) *For more details, please download the PDF or feel free to contact us.

  • Other cleaning equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Example of a cleaning device for metal processing products.

Example of a cleaning device for metal processing products.

Cleaning device using Phoenix 26 kHz / 38 kHz / FM.

Ultrasonic cleaning using cavitation in the 26 kHz or 38 kHz range is used for cleaning oil stains and other contaminants attached to metal machined parts. Generally, the process involves ultrasonic alkaline cleaning → ultrasonic rinsing → drying. Our Phoenix II 26 kHz and Legend 38 kHz/FM are equipped with high-performance constant output circuits, providing consistently stable cleaning power, which has led to their adoption and positive feedback from many cleaning equipment manufacturers.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Feature 1 of the Act Cleaning Machine: Achieves high cleaning power by creating a vacuum inside the cleaning tank.

Feature 1 of the Act Cleaning Machine: Achieves high cleaning power by creating a vacuum inside the cleaning tank.

Deaeration method with high cleaning power tank. High cleaning effectiveness for all types of workpieces.

By repeatedly alternating the pressure inside the cleaning tank between atmospheric pressure and vacuum, we can expel trapped air hidden in fine gaps of the items being cleaned, particularly in the interiors of blind holes such as tapped holes, and expand the contact surfaces between the items to allow the cleaning solution to penetrate into every corner. At the same time, we also degas the dissolved oxygen contained in the cleaning solution, enhancing the cavitation effect of the ultrasound. This enables a high cleaning effect for all types of workpieces. For more details, please download the catalog or contact us.

  • Other cleaning machines
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Carbon Ultrasonic Disperser [Heelscher Company] 1mL to 1000L

Carbon Ultrasonic Disperser [Heelscher Company] 1mL to 1000L

Equipment capable of scaling up (5ml → 1000ml → 10L → 1000L) with powerful ultrasonic devices equivalent to ultra-high pressure jet mills.

Heilshar Company primarily designs and manufactures large and powerful ultrasonic equipment, providing lab equipment, prototype benchtops, and production-level equipment. Effective and energy-efficient technology is required to harness ultrasonic capabilities. Additionally, even with the same ultrasound, the results are completely different from immersion-type ultrasonic cleaners. It is the high amplitude and high surface strength of Heilshar's powerful ultrasound that enables this technology. We have obtained Japanese explosion-proof certification for models ranging from 2000W to 8000W. Until now, Heilshar ultrasonic equipment has achieved high output (50,000W), which was impossible with ultrasonic devices, and guarantees 24-hour continuous operation. Unlike shear mixers, ultra-high-pressure homogenizers, and stirring bead mills that use shear force, our method of dispersion is different. Through 100% cavitation caused by ultrasound, we can achieve results that were unattainable with shear force. <Applications> Nanodispersion of aggregates, reduction of particle size, extraction, emulsification, dissolution, chemical reactions (sonochemistry) <Sectors> Carbon materials, nanomaterials, paints, inks, pigments, fuels, chemicals, cosmetics, biology, food & beverages.

  • CNTラボ分散1.jpg
  • CNT工業分散2.jpg
  • グラフェン剥離3.png
  • グラフェンシートのSEM画像4.jpg
  • Fine grinding machine
  • Emulsifier/Disperser
  • Other processing machines
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-channel ultrasonic disperser

Multi-channel ultrasonic disperser

Multi-channel ultrasonic disperser

This device is a scaled-up multi-unit type of the UH-SR series for production plants. A cooling system is installed at the front of each irradiation section, allowing for more precise temperature management. Additionally, the temperatures of the treatment liquid before irradiation and after irradiation can be monitored through the installation of thermometers. The scale-up can be done from two units to several dozen units, depending on the processing volume and specifications.

  • Analytical Equipment and Devices
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-frequency cleaning unit: Example of use - Stripping cleaning

High-frequency cleaning unit: Example of use - Stripping cleaning

We propose detergents and cleaning processes tailored to your needs! We will solve it with our detergent technology and ultrasonic cleaning.

We propose the "High-Frequency Cleaning Unit" for stripping and cleaning. We believe many customers with painting processes are considering the removal of paint or vapor-deposited layers from jigs and the reuse of these jigs. There are likely many customers who wish to stop using difficult-to-handle chemicals such as caustic soda and hydrocarbons. We offer detergents and cleaning processes tailored to your needs. By maximizing the use of existing equipment, we can improve the workplace environment with minimal investment. 【Features】 ■ By optimizing the cleaning process, it is possible to reduce cleaning time to one-fifth. ■ Since it can be verified based on experimental results, you can implement it with confidence. *For more details, please refer to the PDF document or feel free to contact us.

  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
CLEANVY Series "Water-based and Hydrocarbon-based Fully Automatic Cleaning, Suction, and Drying"

CLEANVY Series "Water-based and Hydrocarbon-based Fully Automatic Cleaning, Suction, and Drying"

【Cleaning test possible】Significantly reduces drying stains! Achieves liquid drainage and drying through a unique suction method (powerful suction + large airflow)! Looking for agents!

Please adopt CLEANVY's unique vacuum degassing system for improved cleaning power in both vapor and suction! 【Features】 ◆ A device that performs liquid separation and drying through a unique suction method (powerful suction + large airflow) ◆ Excellent liquid separation performance significantly reduces drying stains ◆ Drying time can be greatly shortened compared to other companies' hot air circulation methods ◆ Solvent mist generated during suction is 99% recovered by a mist separator installed before the suction blower, ensuring no mist enters the suction blower for safety ◆ The gas concentration of circulating air and exhaust in the system is safe at below 0.1% (Reference: The lower explosive limit of hydrocarbon solvents is a gas concentration of 0.6%) ◆ The suction blower is designed for increased safety and explosion-proof specifications, and the electrical box undergoes air purging ◆ Most of the air in the system is recirculated, with only a small portion being expelled, resulting in minimal exhaust gas *If you would like to request a cleaning test, please contact us. *For more details, please download the PDF or feel free to contact us.

  • Other cleaning machines
  • Drying Equipment
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ideal for cleaning molds and tools! 'Water-based and quasi-water-based vacuum ultrasonic cleaning device'

Ideal for cleaning molds and tools! 'Water-based and quasi-water-based vacuum ultrasonic cleaning device'

For cleaning oil holes in drills, cutting tools, end mills, and clogged holes or small-diameter holes in molds! By applying reduced pressure and vacuum, it is possible to clean and dry even the finest details.

The "Vacuum Ultrasonic Cleaning Device" capable of automatic cleaning with water-based and quasi-water-based solutions for complex-shaped workpieces is ideal for cleaning molds and tools that have blind holes and small-diameter holes. By adopting vacuum ultrasonic cleaning in the cleaning tank and pure water rinse tank, along with a combination of hot air suction drying and vacuum drying in the drying process, it enables meticulous cleaning and drying even in small-diameter holes and gaps. Custom-made design and manufacturing of cleaning machines can be tailored to meet the customer's cleaning needs. 【Features】 ■ Suitable for cleaning complex-shaped workpieces ■ Application of vacuum and reduced pressure in each process ■ One machine accommodates cleaning, rinsing, and drying processes ■ Custom-made design available according to usage needs 【Track Record】 Cutting tools: Cleaning of oil holes in drills, end mills, etc. Molding molds: Cleaning of molds for resin molding machines and rubber molding machines Automotive-related: Cleaning of piping for fuel filter components Medical devices: Cleaning of injection needles, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

  • s1.jpg
  • Ultrasonic Cleaner
  • Ultrasonic Cleaner

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ultrasonic Cleanerに関連する検索キーワード

Ultrasonic Cleanerの関連カテゴリ

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.