gasketのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

gasket(PTFE) - メーカー・企業と業務用製品 | イプロスものづくり

更新日： 集計期間:Feb 18, 2026～Mar 17, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

gasketの製品一覧

31～48 件を表示 ／ 全 48 件

表示件数
SGM Soft Teflon Type Gasket

SGM Soft Teflon Type Gasket

Soft Teflon-based gasket with chemical resistance, electrical insulation properties, and a combination of strength and flexibility.

The "SGM Soft Teflon Gasket" is a revolutionary non-asbestos joint sheet gasket made of 100% PTFE, featuring excellent heat resistance and chemical resistance, as well as a combination of strength and flexibility. It possesses the required characteristics for gaskets in a well-balanced manner at a high level, allowing for versatile use without the need to differentiate gaskets for each process. 【Features】 ■ Excellent adaptability, easily sealing even on slightly uneven surfaces ■ Strong against stress fluctuations, providing stable sealing performance over a long period ■ Has the highest level of strength among non-asbestos joint sheets ■ Minimal creep relaxation, allowing for stable use over a long period even at the upper limit of the usable temperature *For more details, please refer to the PDF materials or feel free to contact us.

  • Piping Materials
  • Other machine elements
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Superfron Teflon fiber braided packing

Superfron Teflon fiber braided packing

Fluid valves that dislike oxygen and food contamination, etc. Mechanical gland packing that complies with standards based on the Food Sanitation Act.

"Super Fron Teflon Fiber Braided Packing" is a chemical packing made from 100% pure PTFE fiber. It has excellent chemical resistance and can be used with fluids ranging from strong acids to strong alkalis. Applicable fluids include strong acids, strong alkalis, organic solvents, gases, ammonia, hydrocarbons, chemicals, corrosive fluids, pharmaceuticals, and more. 【Specifications (Reference Values)】 ■ Maximum Operating Temperature: -100℃ to +300℃ ■ Pressure: 5.0 MPa (50 kgf/cm²) ■ Peripheral Speed: 5 m/sec ■ pH: 0 to 14 ■ Specific Gravity: 1.7 g/cm³ *For more details, please refer to the related links or feel free to contact us.

  • Other consumables
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Asbestos-free Teflon-impregnated braided packing (with lubricant)

Asbestos-free Teflon-impregnated braided packing (with lubricant)

Insert high-elasticity silicone rubber round cord! The core of a synthetic composite yarn made from newly developed special fibers with inorganic fibers.

"Asbestos Zero Teflon Impregnated Braided Packing" is a DYNAMIC SEAL Packing that has been braided after being treated with PTFE dispersion. Applicable fluids include clean water, seawater, alkaline solvents, various oil-based fluids, acids, organic solvents, and fine chemicals (excluding sulfuric acid, strong alkalis, and strong oxidizing acids). Please evaluate the actual product before use. 【Specifications (Reference Values)】 ■ Maximum operating temperature: -90℃ to +240℃ ■ Pressure: 10MPa (100kgf/cm²) ■ Peripheral speed: 10m/sec ■ pH: 2 to 12 ■ PV: 11.5MPa (115kgf/cm²-m/s) *For more details, please refer to the related links or feel free to contact us.

  • Other consumables
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Special inorganic fiber braided packing 'KS-40'

Special inorganic fiber braided packing 'KS-40'

General-purpose non-asbestos packing suitable for use in valves, pumps, and rotary motion equipment.

The "KS-40" is a general-purpose non-asbestos packing made by weaving special inorganic fibers into a rectangular cross-section, then impregnating it with PTFE dispersion and treating it with lubricating oil. It can be used in applications for valves, pumps, and rotating machinery. Additionally, we also offer "KS-40T," which can be used with fluids such as water, steam, seawater, industrial water, mineral oil, animal and vegetable oils, and solvents. 【Performance Values】 ■ Temperature (°C): 180 ■ Valve Pressure (Mpa): 5.1 ■ Pump - Pressure (Mpa): 1 - Peripheral Speed (m/s): 5 - PV Allowable Value: 3.4 ■ Motion Equipment (Rotating) - Pressure (Mpa): 4.9 - Peripheral Speed (m/s): 1 ■ pH Range: 2-11 *For more details, please refer to the PDF document or feel free to contact us.

  • Piping Materials
  • Piping and Piping Parts
  • Other contract manufacturing
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Plotter Processing Example] Ring-Shaped Gasket

[Plotter Processing Example] Ring-Shaped Gasket

A case study of a gasket made by combining inorganic filler (silica) with Balfron (PTFE)!

We would like to introduce a case where we manufactured 30 ring-shaped gaskets from Vulkaron gasket "Vulkare No. 7020" (thickness 2mm) based on the customer's specifications, with an outer diameter of φ90mm and an inner diameter of φ70mm. Using our plotter processing machine (with router function), we processed the gaskets directly and precisely from CAD data. Since no die cutting was required, we delivered them quickly with a clean finish and no burrs. 【Features of Plotter Processing】 ■ Cost reduction without the need for die cutting ■ Support for small lot production starting from one piece ■ Clean finish with no burrs ■ Easy repeat ordering with data storage *For more details, please download the PDF or feel free to contact us.

  • 12a.png
  • Processing Contract
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Yellow Fiber(R) braided packing

Yellow Fiber(R) braided packing

Excellent abrasion resistance! Superior elasticity, heat resistance, and chemical resistance ensure a long-lasting stable seal life.

The "Yellow Fiber® Braided Packing" is a packing made by impregnating high-strength aramid fiber (KEVLAR®) yarn with PTFE dispersion and heat-resistant lubricant, and then braiding it. The nominal dimensions of "244-4188-01" are 3mm in height and 3mm in width, with a length of 3m at 1/8 inch. Applicable fluids include acids, alkalis, organic solvents, clean seawater, hydrocarbons, oils, wastewater, industrial wastewater, white liquor for pulp, green liquor, and black liquor. 【Specifications (Reference Values)】 ■ Maximum operating temperature: -220℃ to +300℃ ■ Pressure: 10MPa (100kgf/cm²) ■ Peripheral speed: 20m/sec ■ pH: 2 to 13 ■ Specific gravity: 1.5g/cm³ *For more details, please refer to the related links or feel free to contact us.

  • Other consumables
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
White aramid fiber Teflon-impregnated braided packing

White aramid fiber Teflon-impregnated braided packing

Packing using filament yarn! Wide range of applications in the chemical industry and wastewater treatment plants.

We handle "White Aramid Fiber Teflon Impregnated Braided Packing." This packing is made using DuPont's Nomex(R) filament yarn (aramid aromatic polyamide) and is specially impregnated with PTFE dispersion, heat-resistant lubricants, and inert mineral oil, resulting in an asbestos-free chemical packing. Applicable fluids include water, sewage, steam, solvents, chemicals, acids, corrosives, alkalis, oils, liquid raw materials used in pulp and paper mills, caustics, bleaching agents, and reagents. 【Specifications (Reference Values)】 ■ Maximum Operating Temperature: -100℃ to +290℃ ■ Peripheral Speed: 15 m/sec ■ pH: 1 to 13 ■ Lubricant: Silicon Oil Zero ■ Specific Gravity: 1.5 g/cm3 *For more details, please refer to the related links or feel free to contact us.

  • Other consumables
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
【Stable Supply & Usable in Various Industries】 Gasket A to Z

【Stable Supply & Usable in Various Industries】 Gasket A to Z

We can accommodate gaskets from A to Z, with over 60,000 processing achievements and molds available by type and size.

We manufacture and sell gasket products on a made-to-order basis. Our company is a Japanese distributor and sales agent for a manufacturer established in 1982 (third-country supply agreements are possible). Main related industries: shipbuilding, plants, petrochemicals, marine engines, steelmaking, specialty gases. Production products: Approximately 20 types, including non-asbestos gaskets, spiral gaskets, PTFE, rubber gaskets, insulation kits, various plastic processed products, and shipbuilding equipment for marine engines. We have processing achievements and molds for over 60,000 types categorized by type and size. Overseas supply achievements: Thailand, Malaysia, India, Singapore, Dubai, China, Japan. 【Features】 - All products are uniquely made to order. - We maintain price competitiveness through mass production and automated equipment. - In-house mold production. *There are four types of catalogs, but only one type is updated on this site for operational purposes. Please feel free to contact us for others.

  • Other consumables
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Grommet option "MacGuard"

Grommet option "MacGuard"

Shut out infiltration and leakage! Improved heat resistance with grommet processing.

"MacGuard" is the name of an option that applies crimping processing of SUS316L or Hastelloy to the inner and outer diameters of gaskets. By adding MacGuard as an option for gaskets, it is possible to significantly improve sealing performance, contamination prevention, pressure resistance, heat resistance, and more. 【Features】 ■ Shuts out permeation leakage ■ Improved heat resistance ■ Blocks the occurrence of contamination ■ Protects the gasket from fluids ■ Significantly suppresses cold flow of fluorine-based gaskets ■ Prevents gasket adhesion ■ Greatly improves the handling of gaskets *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Expanded graphite yarn braided packing "KS-4030(L/LG)"

Expanded graphite yarn braided packing "KS-4030(L/LG)"

Surface coated with gold wire to enhance strength! Non-asbestos packing for high temperature and high pressure applications.

The "KS-4030(L/LG)" is a non-asbestos packing for high temperature and high pressure, reinforced with Inconel wire and braided into a rectangular cross-section, with its surface coated in gold wire to enhance strength. Additionally, we also offer a non-asbestos packing "KS-4030TG" that has been treated with low torque using PTFE and fine graphite. 【Performance Values】 ■ Temperature (°C): 600 *Heat resistance temperature in a non-oxidizing atmosphere (400°C in an oxidizing atmosphere) ■ Valve Pressure (Mpa): 43.1 ■ Pump ・Pressure (Mpa): - ・Peripheral Speed (m/s): - ・PV Allowable Value: - ■ Motion Equipment (Rotating) ・Pressure (Mpa): - ・Peripheral Speed (m/s): - ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

  • Piping Materials
  • Piping and Piping Parts
  • Other contract manufacturing
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Daiko Tokyo Branch Processing Case No. 40 Gaskets and Industrial Products!

Daiko Tokyo Branch Processing Case No. 40 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. We have processed Teflon (PTFE) using a router. The processing of the countersink holes and the C2 beveling has been completed according to the drawings. Teflon tends to produce burrs when processed with a water jet, so we are using a router for this processing.

  • rapture_20191001113955.png
  • rapture_20190906074204.png
  • rapture_20191017112945.png
  • rapture_20191001112017.png
  • rapture_20190930195733.png
  • rapture_20191009082656.png
  • Piping Materials
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Plant maintenance and machinery maintenance gasket and packing product catalog

Plant maintenance and machinery maintenance gasket and packing product catalog

A product catalog of various gaskets for non-asbestos materials, featuring a comparison chart of manufacturers!

This catalog features products from Daiko Co., Ltd., which manufactures and sells various types of gaskets and industrial products. Our company processes gaskets and packing using a variety of machines, including one of Japan's largest water jet cutting machines. We also have a wide range of items such as joint sheets, rubber, sponge, and resins. Our original brand, the non-asbestos joint sheet "D-6000," is among our well-developed products. 【Featured Products】 ■ Non-asbestos Joint Sheet D-6000 ■ Graphite Spiral Gasket D-1000 ■ Teflon Cushion Gasket D-7000 ■ SGM Soft Teflon Gasket ■ Rubber Packing, etc. *This PDF is a digest version. Please feel free to contact us if you need the full version.

  • がぞう３.png
  • がぞう４.png
  • がぞう５.png
  • がぞう２.png
  • がぞう１.png
  • Piping Materials
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Daiko Tokyo Branch Processing Case No. 27 Gaskets and Industrial Products!

Daiko Tokyo Branch Processing Case No. 27 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. We processed 9096-SGM using a plotter. SGM is a gasket made of 100% PTFE, which excels in heat resistance and chemical resistance, combining strength and flexibility. It is harder than soft Teflon and has excellent sealing properties. The processing was done with a plotter, resulting in a clean finish on the processed surface.

  • rapture_20191001113955.png
  • rapture_20190906074204.png
  • rapture_20191017112945.png
  • rapture_20191001112017.png
  • rapture_20190930195733.png
  • rapture_20191009082656.png
  • Piping Materials
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
8851ND CleaLock/1500 HOCHDRUCK

8851ND CleaLock/1500 HOCHDRUCK

Customers struggling with steam! Here is the solution!

Are you using PTFE or joint sheets and experiencing significant leakage with steam? Our expanded graphite gaskets improve the handling issues and are widely used in the market. Here are two of our gaskets: - 8851ND CleaLock The 8851ND CleaLock is our original gasket made from high-density expanded graphite combined with stainless steel. This improves handling and provides a good tightening feel, which has received great acclaim from operators. Additionally, we have a quick turnaround time, typically responding within 3-4 days, and we will do our best to accommodate urgent requests, so please feel free to contact us. - 1500 HOCHDRUCK-Pro The 1500 HOCHDRUCK-Pro retains the soft expanded graphite while featuring multiple layers of stainless steel. It has 5 layers of stainless steel at a thickness of 3mm and 7 layers at a thickness of 4mm. It can be used under high pressure, making it a popular choice as an emergency substitute for metal gaskets, and of course, we can also provide quick delivery.

  • Other consumables
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Daiko Tokyo Branch Processing Example No. 7 Gaskets and Industrial Products!

Daiko Tokyo Branch Processing Example No. 7 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jet cutters and plotter and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Example】 〇 T9007LC 3mm PTFE with filler was processed using a plotter. By using a special ultra-hard blade for processing, the cross-section of the gasket is finished beautifully. We can accommodate processing ranges up to 1500W, allowing for large-diameter processing to be completed in a short delivery time. This is a high-performance gasket that is resistant to heat up to 200°C and has low creep.

  • Piping Materials
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Gasket manufacturing (JIS, ASME, ANSI, JPI, non-standard)

Gasket manufacturing (JIS, ASME, ANSI, JPI, non-standard)

Leave the manufacturing of gaskets to us, from small lots of one piece to mass production! Quick delivery is also possible. *We offer free sample production.

At our Tsuchiura factory, we perform punching and cutting processing of joint sheets, synthetic rubber sheets, PTFE sheets, and various oil sheets. By using cutting plotters and press processing methods, we can produce according to the needs of quantity and lot size. We also select materials suitable for the usage environment, so please feel free to consult with us. Production data (CAD data) will be permanently stored as a general rule. 【Features】 ■ Processing with cutting plotters - Supports small quantities and various types, prototype support, and reduced initial costs ■ Press punching processing - When a certain quantity is anticipated, molds can be created to reduce unit costs and delivery times * We offer free sample production on the condition that materials are provided, so please feel free to reach out (limited to one piece per item). * For more details, please download and view the PDF.

  • Rubber
  • gasket

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

gasketの関連カテゴリ

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.