Fluid Analysis Software Product List and Ranking from 12 Manufacturers, Suppliers and Companies

[Analysis Case] Diesel Engine Cylinder Spray Combustion Analysis

In "CONVERGE," it is possible to achieve high analysis accuracy with minimal computational load.

In "CONVERGE," it is possible to achieve high analysis accuracy with minimal computational load by utilizing many mesh control features, including Adaptive Mesh Refinement (AMR). This is an example of spray combustion calculations in a sector model of a diesel engine, where the mesh near the spray is automatically refined during the injection period by the local refinement feature. Additionally, the AMR corresponding to temperature and velocity gradients automatically refines the mesh in the necessary areas to enhance computational accuracy, demonstrating the results of improved accuracy. 【Features】 ■ Achieves high analysis accuracy with minimal computational load ■ Mesh is automatically refined by the local refinement feature *For more details, please refer to the PDF document or feel free to contact us.

Company：IDAJ
Price：Other

Other analyses
simulator
Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Case] In-cylinder Flow Analysis (With and Without Tumble Control)

Calculate and compare the flow field with and without a valve in "CONVERGE".

To enhance tumble, we are calculating and comparing the flow fields with and without a valve installed inside the intake port using 'CONVERGE'. In this case, adaptive mesh refinement (AMR) is applied according to the velocity gradient, so the mesh in areas with significant velocity gradients, such as those passing through the valve, is automatically refined, allowing for calculations with higher accuracy. You can view the video of this case. 【Features】 ■ Calculation and comparison of flow fields with and without a valve installed inside the intake port ■ Automatic refinement of the mesh in areas with significant velocity gradients *For more details, please refer to the PDF document or feel free to contact us.

Company：IDAJ
Price：Other

Other analyses
simulator
Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Case] Supersonic Flow Analysis Around Wings 'CONVERGE'

It is published that shock waves can be predicted with very high resolution by AMR.

In 『CONVERGE』, the Adaptive Mesh Refinement (AMR) feature automatically controls the appropriate mesh based on the gradient of the analysis variables. This case demonstrates an example of supersonic flow field analysis around a wing calculated using 『CONVERGE』, showing that shock waves can be predicted with very high resolution thanks to AMR. 【Features】 ■ The solver automatically controls the appropriate mesh based on the gradient of the analysis variables. ■ Shock waves can be predicted with very high resolution due to AMR. *For more details, please refer to the PDF document or feel free to contact us.

Company：IDAJ
Price：Other

Other analyses
simulator
Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software for gear pumps, 'Simerics MP+'.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software Simerics MP+ for vane pumps.

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Particle Method 3D Rarefied Fluid Analysis Software 'DSMC-Neutrals'

Analysis of gas flow under low pressure conditions can be performed with analysis software that also supports rarefied gases (rarefied fluids).

**Features** - Adopts unstructured mesh, allowing for calculations that directly reflect the complex shapes of actual devices. - High parallel efficiency enables quick computation results even for large-scale geometries. - Utilizes a particle method, ensuring convergence to a solution even with poor-quality computational grids, unlike fluid models. - Comprehensive technical support ensures that even those new to simulation or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow in a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Chemical vapor deposition (CVD), organic light-emitting diode (OLED), molecular beam epitaxy (MBE). - Film deposition simulations involving chemical reactions like CVD. **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

Company：ウェーブフロント本社
Price：Other

Other analyses
Contract Analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software for valves, 'Simerics MP+'

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized for valves and pumps, which other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements for automotive and construction machinery oil pumps, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demonstration!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software for oil pumps, 'SimericsMP+'.

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo presentation!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-axis screw compressor flow analysis mesh generator 'SCORG'

SCORG is a measurement software for the design and analysis of screw compressors, expanders, pumps, and motors.

Our strength lies in the ability to generate meshes for various computational fluid dynamics (CFD) software. For example, we can integrate with most commercial CFD solvers such as Simerics MP, Ansys CFX, and STAR-CCM+, as well as engineering software. We can create complex meshes for screw compressors without being dependent on the solver. By using SCORG solely for the creation of complex meshes like those for two-axis screw pumps and compressors while continuing to use your familiar solver, you can significantly reduce the tedious effort involved in analysis. Additionally, you can perform simulations leveraging existing know-how without having to learn a new solver, which greatly reduces both the effort and cost compared to switching solvers. Furthermore, we have presented a case study on fluid analysis (CFD) of two-axis screw compressors at the Japan Society of Refrigerating and Air Conditioning Engineers. Please contact us for more details.

Company：ウェーブフロント本社
Price：1 million yen-5 million yen

simulator
Thermo-fluid analysis
Contract Analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw compressor mesher "SCORG"

SCORG is a measurement software for the design and analysis of screw compressors, expanders, pumps, and motors.

Our strength lies in the ability to generate meshes for various computational fluid dynamics (CFD) software. For example, we can integrate with most commercial CFD solvers such as Simerics MP, Ansys CFX, and STAR-CCM+, as well as engineering software. We can create meshes for complex screw compressors without being constrained by the solver. By using SCORG solely for the creation of complex meshes like those for two-axis screw pumps and compressors while continuing to use your familiar solver, you can significantly reduce the tedious effort involved in analysis. Additionally, you can perform simulations leveraging existing know-how without the need to learn a new solver, which greatly reduces both effort and costs compared to switching solvers. We also have a case study on fluid analysis (CFD) of a two-axis screw compressor that we presented at the Japan Society of Refrigerating and Air Conditioning Engineers. Please contact us for more details.

Company：ウェーブフロント本社
Price：1 million yen-5 million yen

simulator
Thermo-fluid analysis
Contract Analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw pump meter "SCORG"

SCORG is a measurement software for the design and analysis of screw compressors, expanders, pumps, and motors.

Our strength lies in the ability to generate meshes for various computational fluid dynamics (CFD) software. For example, we can integrate with most commercial CFD solvers such as Simerics MP, Ansys CFX, and STAR-CCM+, as well as engineering software. We can create meshes for complex screw compressors without being limited by the solver. By using SCORG solely for the creation of complex meshes like those for two-axis screw pumps and compressors while continuing to use your familiar solver, you can significantly reduce the cumbersome effort involved in analysis. Additionally, you can conduct simulations leveraging existing know-how without having to learn a new solver, which drastically reduces both effort and costs compared to switching solvers. Furthermore, we have presented a case study on fluid analysis (CFD) of a two-axis screw compressor at the Japan Society of Refrigerating and Air Conditioning Engineers. For more details, please contact us.

Company：ウェーブフロント本社
Price：1 million yen-5 million yen

simulator
Thermo-fluid analysis
Contract Analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software 'Simerics MP+' strong in vane pumps.

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software for gear pumps, 'Simerics MP+'.

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and motion through a demonstration!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Strong fluid analysis software for oil pumps 'Simerics MP+'

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see a demo presentation for the actual mesh creation and movement!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Battery cooling analysis also uses 'Simerics MP+'.

Not only applicable to hydraulic circuits such as engines and transmissions, but there are also numerous achievements in the analysis of oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Strong fluid analysis software for valves, 'SimericsMP+'.

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized for valves and pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Its greatest strength is the ability to automatically create meshes even for clearances on the order of micrometers, which is difficult for other general-purpose fluid analysis software! In addition to valve analysis, there has been an increasing number of achievements in oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see a demo for the actual mesh creation and movement!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Strong fluid analysis software for valves, 'Simerics MP+'.

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized for valves and pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements for automotive and construction machinery oil pumps, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be published online. Especially, please see a demo presentation for actual mesh creation and movement!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SimericsMP+: A powerful fluid analysis software for internal gear pumps.

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SimericsMP+, a powerful fluid analysis software for external gear pumps.

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powerful fluid analysis software for gearboxes: SimericsMP+

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool for calculating the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demo presentation!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software SimericsMP+ with strong coupling of pumps and valves.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simerics MP+ is also used for oil cooling analysis of eAxle.

Analyze the oil cooling of the eAxle using Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Flow field (velocity vectors, pressure), flow rate, fluid forces, and time variation of torque Recently, there has been an increase in projects for oil cooling analysis of eAxles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine calculation meshes - It diverges and does not converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it can only determine the areas where oil is present. Our company undertakes actual contract work from Tier 1 customers, gaining know-how that cannot be obtained solely from software sales. Development source's SAE presentation paper on motor oil cooling https://saemobilus.sae.org/content/2020-01-0168/

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simerics MP+ is also used for the oil cooling analysis of E-Axle.

Analyze the oil cooling of the E-Axle using Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for oil cooling analysis of E-Axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - The solution diverges and does not converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it is only possible to determine the areas where oil is present. Our company has gained know-how that cannot be obtained solely from software sales by actually undertaking contract work from Tier 1 customers. Development source's SAE presentation paper on motor oil cooling https://saemobilus.sae.org/content/2020-01-0168/

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simerics MP+ is also used for oil cooling analysis of e-axles.

Analyze the oil cooling of e-axles with the powerful rotation and VOF features of Simerics! It's also suitable for switching from other general-purpose CFD solvers and particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for oil cooling analysis of e-axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - It diverges and does not converge Additionally, even when analyzed using particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it only provides a rough idea of where the oil is located. Our company has gained know-how that cannot be obtained solely from software sales by actually undertaking contracted work from Tier 1 customers. Development source's SAE presentation paper on motor oil cooling https://saemobilus.sae.org/content/2020-01-0168/

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cooling analysis of the e-axle also uses "Simerics MP+".

Analyze the cooling of the e-axle with Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations, water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Flow field (velocity vectors, pressure), flow rate, fluid forces, and time variations of torque Recently, there has been an increase in projects for cooling analysis of e-axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - The solution diverges and does not converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it is only possible to identify areas where oil is present. Our company has gained know-how that cannot be obtained solely from software sales by undertaking actual contract work from Tier 1 customers. SAE presentation paper on motor oil cooling from the developer: https://saemobilus.sae.org/content/2020-01-0168/

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
Fluid Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid Analysis Software Product List and Ranking from 12 Manufacturers, Suppliers and Companies | IPROS GMS

Fluid Analysis Software Manufacturer, Suppliers and Company Rankings

Fluid Analysis Software Product ranking