Fluorine resin coating Product List and Ranking from 39 Manufacturers, Suppliers and Companies

Fluororesin coating adopted in the chemical and semiconductor industries for its corrosion resistance and purity.

Thick film fluoropolymer coatings are suitable for applications that require excellent corrosion resistance and purity. A coating that protects metals and prevents the leaching of metal ions!

■ Thick Film Fluororesin Coating (Film Thickness 300–2000 μm) 【Excellent Chemical Resistance of Fluororesin】 Fluororesin is chemically stable, so it is not affected by most acids, alkalis, and other chemical substances, nor do its molecules dissolve and leak out. 【Fluororesin Thick Film Pinhole-Free Coating】 By applying a pinhole-free thick film coating to can bodies and substrates where lining and molding are not possible, it is possible to protect against corrosive liquids and gases such as acids and alkalis, as well as to prevent the leaching of metal ions. *For more detailed information, please see the link below.

Company：吉田ＳＫＴ
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface Treatment of Yoshida SKT Co., Ltd. - "Business Introduction"

Yoshida SKT helps create new value through surface treatment technology.

Yoshida SKT is a company that has been leading innovations in fluoropolymer processing technology for over half a century. Starting with the licensing agreement with DuPont in the United States in 1968, we have focused on the introduction and development of fluoropolymer coating technologies, including Teflon(TM). Our technological capabilities extend beyond Teflon fluoropolymer coatings and have led to the development of a variety of coating technologies. 【Key Surface Treatment Technologies】 Teflon Fluoropolymer Coating Features non-stick properties, chemical resistance, heat resistance, and cold resistance, making it suitable for a wide range of applications. MY Lining(R) A permeation-resistant PFA lining, ideal for handling chemical substances. SafeLON(R) A fluoropolymer coating with anti-static properties that enhances safety. Non-Stick Coating Series A series of coatings specifically designed to address sticky substances. BICOAT(R) An organic-inorganic composite coating system boasting ultra-durability. NanoProcess(R) A precision thin-film coating process that meets cutting-edge technological demands. From extensive material selection to the provision of test pieces, Yoshida SKT offers meticulous support tailored to the specific needs of each customer.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

For preventing the scattering of glassware and scientific instruments: "Non-Skecoat"

Visible light transmittance of 95%!! This is an advanced coating that prevents the scattering of hazardous chemicals and expensive pharmaceutical raw materials inside.

By applying a unique fluororesin coating to glassware such as beakers and flasks, as well as scientific instruments, we prevent glass shattering in the event of falls or accidents, ensuring safety on-site. Additionally, the amount of hazardous chemicals or expensive pharmaceutical raw materials that may scatter is reduced, thereby minimizing the risk of serious accidents or losses. The transparency is higher than that of standard fluororesin coatings, so visibility and measurement of the contents remain unaffected! ■ Features - Excellent adhesion prevents glass scattering - Minimizes exposure and loss of contents - Allows for normal operations with overwhelming transparency ■ Main Applications - Medical institutions, welfare facilities, testing organizations, universities, research institutions, etc. *For more details, please refer to the PDF materials or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-thin film coating "Nano Process®" [New product information available]

Film thickness of less than 1μm. A coating process for forming a nanometer-level thin film on a substrate.

The ultra-thin film surface treatment "Nano Process" coats surfaces with a thin film ranging from the nano level to about 1μm, enhancing water repellency, oil repellency, non-stick properties, and liquid sliding properties. It causes almost no dimensional changes and maintains optical properties, making it possible to process "precision parts" and in fields that require high dimensional and surface accuracy, where fluororesin coatings have been difficult until now. <Examples of industries that require high surface accuracy> Semiconductors, Automotive, Batteries, Electronic Components, Medical Devices, etc. Additionally, the Nano Process has been renewed with four new functions, each with different features and applications. We are currently distributing technical materials summarizing the characteristics and functions of the entire series. If you are interested in more details or are facing challenges with surface treatment in precision fields, please download the materials or contact us directly.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【資料進呈】摺動性・滑り性に優れたコーティングとは？　

滑り性、摺動性に優れ、耐摩耗性にも優れるコーティング。用途環境に適したコーティングを選択できます。

製造設備では、ふたつのものが接触して動く箇所の滑り性（潤滑性）を良くすることで、稼働をスムーズにしたり、少ない力でものを動かしたりという効果が求められます。〇フッ素樹脂、特にテフロンフッ素樹脂の代表格でもあるPTFEは　摩擦係数が低く、静摩擦係数は動摩擦係数よりも小さいため、　スティックスリップ現象を起こさず滑らかに滑ります。〇バイコート(R)は高い硬度を備えた無機材料とフッ素樹脂を組み合わせ、　滑り性に優れる、超耐久性ふっ素系有機コーティングシステムです。〇スーパーTPコーティングは、フラットな基材でも　オールフッ素の独自の凸面コーティングが可能。　接触面積のコントロールによるすべり性に優れたコーティングです。【選ばれているコーティング】 ■摺動・低摩擦性　・テフロン(TM)フッ素樹脂コーティング ■潤滑・耐摩耗性・高硬度　・バイコート(R) ■接触面積コントロールによる滑り性（フッ素樹脂系）　・スーパーTP 　・スーパーTP半球グラフィック ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

Company：吉田ＳＫＴ
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Food Industry Case Study] Preventing Product Jamming with Conveying Guides for Automatic Packaging Machines

Case study of solving issues with automatic packaging machines for frozen foods. The adhesion caused by moisture to the transport guide has been reduced, improving the sliding performance.

We would like to introduce a case where product jams were prevented in the conveying guide of a frozen food automatic packaging machine. During the 20-hour daily operation of frozen food packaging, a phenomenon occurred where the side guide became a resistance to product conveyance, causing the line to jam. This resulted in the equipment stopping and the line halting, which was a significant issue. Additionally, there was a problem where the products were being scraped due to friction with the guide. By adopting the "Super TP Hemisphere HL," a large convex surface created a gap between the product and the guide, reducing sticking due to moisture and improving sliding. The situation where products jammed and the equipment stopped has been improved. [Key Points] - Purpose of surface treatment: Reduce work loss, stabilize quality and operation - Required functions: Non-stick and release properties, sliding and gliding, wear resistance - Adopted treatment: "Super TP Hemisphere HL" *For more details, please refer to the PDF materials or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study in the Hygiene Products Industry] Improved Cleanability of Adhesive on Rolls!

Shortening cleaning time! A case study on solving coating challenges that improved productivity.

We would like to introduce a case study on surface treatment in the lamination process using hot melt adhesives for diapers and sanitary products. In the lamination process, if the applied adhesive adheres to the transport rolls, there is a risk of it transferring to the product or contaminating it, resulting in defective products. Therefore, it was necessary to regularly remove the adhesive. We adopted our "Super CTT" for this purpose. Thanks to its release effect, the semi-cured hot melt adhesive is transported without adhering, which reduces the frequency of cleaning, shortens cleaning time, and ultimately improves productivity. 【Key Points】 ■ Purpose of surface treatment: Speeding up, stabilizing quality and operation, reducing work loss ■ Required functions: Non-stick, release properties, wear resistance ■ Treatment adopted: Super CTT *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Coating to Eliminate Sheet Adhesion to Molds

Almost zero adhesion! Case study of coating used during decorative sheet transfer.

We will introduce a case that resolved the sticking of decorative sheets to molds during transfer. ■Background Decorative sheets with adhesive are set onto parts using molds and are transferred via vacuum. During this process, it was observed that excess sheets, other than those on the parts, would stick to certain parts of the mold. To prevent the sticking caused by the adhesive on the decorative sheets, surface treatment of the molds was being explored. ■Adoption of Coating and Effects By adopting our "Bicoat," significant improvements in preventing sticking were achieved. The sticking of decorative sheets was reduced to almost zero, resulting in a level of satisfaction from our customers. 【Key Points of the Case】 ■Purpose of Surface Treatment: Quality and operational stability, realization of development needs, reduction of replacement and material costs ■Required Functions: Non-stick and release properties, long lifespan ■Adopted Treatment: Bicoat *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study on Problem Solving through Surface Treatment] Prevention of Adhesion to Conveying Rolls of Uncured Rubber

The effect of preventing sticking lasts a long time! It has become possible to reduce costs and working time.

■Concern The manufacturing process of weatherstrips involved transporting extruded rubber on rolls while heating and drying it in a furnace. Due to changes in the rubber material formulation for environmental measures and durability, it became necessary to process the rubber at higher temperatures than before, resulting in the rubber becoming sticky immediately after entering the furnace. ■Issues It was confirmed that when a common fluoropolymer coating was applied to the transport rolls, the rubber would stick to them like a suction cup. ■Effect of Surface Treatment By adopting our "Super TP Coating," we significantly reduced the rubber's stickiness and achieved a relatively soft contact surface. 【Key Points】 ■Purpose of Surface Treatment: Quality and operational stability, reduction of work loss, compliance with safety and environmental requirements ■Required Functions: Non-stick and release properties, long lifespan ■Adopted Treatment: Super TP Coating *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Coating Example] Non-stick Performance Scissors

The special coated blade repels sticky substances!

The scissors coated by Yoshida SKT do not attract adhesive materials. The film thickness is 1 to 3 microns. The precision of the blade tip is maintained even after coating. Since the coating extends to the blade tip, it has a high level of non-stickiness all the way to the tip of the blade. They can be used for cutting various adhesive materials such as vinyl tape, double-sided tape, and cloth tape. Our company is capable of applying a coating that prevents adhesive materials from sticking to scissors. As a specialized manufacturer of surface treatment and industrial Teflon fluororesin coating, we provide problem-solving solutions that enhance customer satisfaction. 【Features】 ■ Film thickness: 1 to 3 microns ■ Maintains blade tip precision even after coating ■ High non-stickiness all the way to the tip of the blade *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Presentation of materials: A coating that surpasses fluorine and silicone in anti-adhesion properties.

For applications that cannot be satisfied with Teflon or silicone coatings! You can experience excellent release properties.

To prevent sticking of adhesive materials, fluororesin coatings (Teflon™ coatings) and silicone coatings are commonly used, but the following challenges may arise: [Challenge 1] Even with surface treatments claiming to prevent sticking, there was not much change. [Challenge 2] It started sticking unexpectedly quickly during use. [Challenge 3] Silicone coating transfers and causes defects in the bonding process (fluororesin did not provide sufficient effectiveness, leading to the choice of silicone). Recently, there has been an increase in customers needing solutions for more adhesive materials, such as wanting to release molten resins that do not fully solidify to shorten process time. Yoshida SKT has coatings that can improve such situations. In general fluororesin coatings, adhesive materials can stick due to various factors. In contrast, treatments that create a rough surface to reduce the contact area with adhesive materials are known. Our company has a unique technology to create convex surfaces using fluororesin and other materials, and we are now offering a kit to experience its effectiveness for free! ▼ You can apply from the "Yoshida SKT Official Site" below.

Company：吉田ＳＫＴ
Price：Other

Other Auto Parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Bi-Coat" with durability that surpasses fluororesin coatings.

For those troubled by peeling and wear of fluororesin coatings, we are currently offering free samples of 'Bicoat(R)', which excels in high hardness, wear resistance, release properties, and slip characteristics.

Do you have any concerns or requests regarding coatings for "preventing sticking" and "improving sliding"? - "Worried about coating deterioration or peeling" - "Want to extend the period until reprocessing" In production environments, there is always a demand for "damage-free" coatings. Bycoat® is a coating that pursues a balance of [durability and strength] and [anti-sticking and sliding effects]. [Purpose] To reduce the possibility of troubles such as "function degradation, foreign matter contamination, and defects caused by coating scratches and peeling," which can lead to decreased production efficiency. [Examples of Use] - Conveyance guides Provides sliding properties to prevent clogging of conveyed items. Reduces the risk of coating peeling and foreign matter contamination. - Heat seal type (sealer) Prevents sticking of the sealing member that presses the film with heat and coating peeling. - Molding type Contributes to improved release properties of resin product molds. Maintains dimensional accuracy, allows for low-temperature processing, and preserves mold quality. We are currently offering a free "Bycoat® Experience Kit." Please try the anti-sticking and sliding properties with actual materials. ▼ You can apply for the "Experience Kit" from the official Yoshida SKT website below.

Company：吉田ＳＫＴ
Price：Other

Other Auto Parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Presentation of Case Studies: Improve Conveying Equipment with Anti-Sticking Coating!

Waste hidden in conveying devices and processes. With convex coating, why not start improvements now for "profit enhancement" and "productivity increase"?

The unique convex coating technology of Yoshida SKT, which excels in "anti-sticking and slip resistance," will improve your transportation processes and contribute to increased profitability. OLD NORMAL - Current Production Site - - It's just how things are - It's working without issues - Someone can handle it each time This common sense has taken root and is often overlooked. If we don't change this situation to a "New Normal," profitability will not improve! NEW NORMAL - Correct Approach - - Prepare and consider measures before problems arise - Promote labor-saving, cleanliness, and automation through robotics - Reduce indirect work and allow workers to focus on their core tasks Yoshida SKT's convex coating will assist in transitioning to the New Normal in transportation! 1. What Makes Yoshida SKT's Convex Coating Different It can control a rich variety of convex formations according to conditions, ensuring a high level of improvement. 2. We Have Improvement Case Studies We have a proven track record with various transportation materials, improving diverse transportation troubles such as adhesives and rubber products. [We offer a collection of case studies on process improvements through coating] If you are interested, please request the "trial set" through the related link!

Company：吉田ＳＫＴ
Price：Other

Conveyor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for Coating Selection: "Coating Performance Measurement Service" *Materials Available

To meet the need of wanting to confirm the effectiveness before coating, Yoshida SKT measures the coating surface with its unique know-how.

"I want to test the effectiveness of coatings using materials produced in-house in advance." "I am considering introducing coatings but am struggling with how to select them." To address these concerns, we propose measuring coating performance using our unique know-how, allowing for a comparative review before introducing coatings. Please feel free to consult us about preparing sample pieces. - Do you have any of these issues? During resin molding, resin sticks to molds or extruders, causing problems. After researching, I found that surface treatment is an effective measure to prevent sticking, but there are various types of resins and additives depending on the product, and I don't know which surface treatment to choose. - With our coating performance measurement service, you can use the materials you are currently using to check the adhesion with the coating, facilitating smooth real machine testing. ■ Measurement of Release Force of Melted Resin Pellets We measure the release force between melted resin pellets and the coated surface, allowing you to confirm the degree of peeling from the coating numerically. *For applications and to download materials, please visit the official Yoshida SKT website below.

Company：吉田ＳＫＴ
Price：Other

Contract measurement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What are the differences between fluoropolymer coatings: PTFE, PFA, and FEP?

We will introduce the differences between fluoropolymer PTFE, PFA, and FEP.

Differences in Types and Characteristics of Representative Resins for Teflon Coating and Fluororesin Coating ■ Resin Name PTFE (Polytetrafluoroethylene) ■ Characteristics It has the highest continuous use temperature of 260°C, and in addition to heat resistance, it excels in non-stick and low friction properties. ■ Alternative Name Tetrafluoroethylene, 4F ■ Resin Name PFA (Perfluoroalkoxyalkane Polymer) ■ Characteristics An improved resin of PTFE, it has the same continuous use temperature of 260°C as PTFE. It has a low thermal melt viscosity, allowing for a continuous coating with fewer pinholes that could not be achieved with PTFE, making it the best-performing fluororesin for corrosion-resistant coatings. Additionally, PFA is superior in non-stick properties compared to PTFE for certain applications, making it suitable for high-temperature release coatings. ■ Resin Name FEP (Perfluoroethylene Propylene Copolymer) ■ Characteristics An improved resin of PTFE, but with lower heat resistance than PTFE. It can achieve a smooth coating with fewer pinholes through firing. ■ Alternative Name 4F6F, Tetra-hexafluoride

Company：吉田ＳＫＴ
Price：Other

Secondary Cells/Batteries

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine resin coating Product List and Ranking from 39 Manufacturers, Suppliers and Companies

Fluorine resin coating Manufacturer, Suppliers and Company Rankings

Fluorine resin coating Product ranking