We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Substrate Coating.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Substrate Coating - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Substrate Coating Product List

31～60 item / All 67 items

Displayed results
Conformal coating agent, room temperature drying only, non-hazardous, high safety.

Conformal coating agent, room temperature drying only, non-hazardous, high safety.

Environmentally friendly (non-organic solvent, non-hazardous, low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → This eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle, keeping the workplace clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *Please contact us if you would like a free sample.

  • IPROS61567518649095654966.jpeg
  • バナーブルー_300_250.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coating agent for substrates, high moisture resistance, room temperature drying in a short time, non-hazardous, high safety.

Coating agent for substrates, high moisture resistance, room temperature drying in a short time, non-hazardous, high safety.

For waterproofing and insulation of electronic components, as well as moisture-proof and waterproof coating of circuit boards! Four times the moisture resistance of polyurethane and acrylic! Non-flammable and highly safe! *Samples available.

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. PFAS-regulated substances are not used. 【Features】 - Four times the moisture resistance compared to urethane and acrylic moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use. There are no fire safety regulations, significantly reducing management items. - Not classified as an organic solvent. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating agent for substrate migration prevention

Conformal coating agent for substrate migration prevention

High-performance coating agent for electronic substrates, non-hazardous, free of regulated substances, air-dry at room temperature (no drying process required).

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. Free samples are available upon request. 【Introduction Background】 ■ Prevent metal migration due to moisture in multilayer mounted circuit boards ■ Short circuits and failures caused by water droplets and humidity during outdoor use ■ Prevention of fire due to short circuits from lithium battery electrolyte leakage ■ Malfunctions and corrosion caused by leaks due to condensation in high humidity ■ No need for management as hazardous materials or organic solvents ■ Exempt from PFAS regulatory substances *If you would like a free sample, please include "Sample Request" in your inquiry.

  • バナーブルー_300_250.jpg
  • seihin.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Signal stabilization with coating agents for circuit boards for communication.

Signal stabilization with coating agents for circuit boards for communication.

Protects the circuit board of communication equipment and improves signal stability! Moisture-proof, insulation, and acid resistance.

In the telecommunications industry, the reliability of electronic devices is extremely important, and the stability of signals is essential. Equipment used outdoors or in harsh environments can deteriorate due to moisture, corrosive substances, and temperature changes, potentially leading to signal disruption and equipment failure. Our coating agents for circuit boards address these issues through moisture resistance, insulation, and acid resistance, supporting stable signal transmission. 【Usage Scenarios】 - Base stations - Communication cable connections - Wireless communication devices - IoT devices 【Benefits of Implementation】 - Signal stabilization - Extended equipment lifespan - Reduced maintenance costs - Lower risk of failure

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coating agent for substrates for solar power generation

Coating agent for substrates for solar power generation

Protects the substrate of the solar power generation system and contributes to maintaining long-term efficiency.

In the solar power generation industry, the long-term stable operation of systems and the maintenance of power generation efficiency are crucial. Solar power generation systems installed in outdoor environments are susceptible to influences such as humidity, temperature changes, ultraviolet rays, and salt damage, which can lead to substrate corrosion and insulation failures, potentially resulting in decreased power generation efficiency and system failures. Our coating agents for substrates address these challenges and contribute to the long-term stable operation and efficiency maintenance of the systems by protecting the substrates. 【Usage Scenarios】 - Substrates of solar power generation systems - Outdoor electronic devices - Use in humid environments 【Benefits of Implementation】 - Prevention of substrate corrosion - Improvement of insulation properties - Long-term system stability - Maintenance of power generation efficiency

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating agent, non-flammable, no explosion-proof equipment required.

Conformal coating agent, non-flammable, no explosion-proof equipment required.

Four times the moisture-proof performance of urethane and acrylic! Non-flammable, no need for explosion-proof equipment or hazardous material storage. *Samples available.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 - Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use without fire safety regulations or the need for explosion-proof equipment or hazardous material storage. - Exempt from the Organic Law under the Industrial Safety and Health Act, reducing management items. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes, no heating required. - Does not use PFAS regulated substances (such as PFOA, PFOS, PFHxS, etc.). *If you would like a free sample, please include "Sample Request" in your inquiry.

  • バナーブルー_300_250.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] I want to make the ink container's remaining amount visible.

[Example] I want to make the ink container's remaining amount visible.

When applied to the inner surface of the ink container, it becomes highly liquid-repellent, making the boundaries clearly visible. *Samples available for distribution.

Fluoropolymer FS-1600 series, a non-flammable type with ink (oil-based) resistance and long-lasting high liquid repellency. 【Purpose of Coating】 The inner surface of the container has been fluorine-coated to clearly indicate the remaining ink level in ink cartridges and oil-based pens. 【Challenges】 - Requires ink resistance (oil-based) and the ability to maintain liquid repellency over a long period. Other cases are also published! *If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Conformal Coating Example] Preventing Metal Migration on Circuit Boards Due to Moisture

[Conformal Coating Example] Preventing Metal Migration on Circuit Boards Due to Moisture

It has four times the moisture resistance of urethane and acrylic, and protects the substrate from moisture and electrolytic solutions with a thin film. It is classified as non-hazardous under the Fire Service Act and is not subject to organic solvent regulations, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of printed circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to Choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • バナーブルー_300_250.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Conformal Coating Example] Preventing Metal Migration on Circuit Boards Due to Moisture

[Conformal Coating Example] Preventing Metal Migration on Circuit Boards Due to Moisture

It has four times the moisture resistance of urethane and acrylic, and protects the substrate from moisture and electrolytic solutions with a thin film. It is classified as non-hazardous under the Fire Service Act and is not subject to organic solvent regulations, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • black_light_test.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gasoline-resistant moisture-proof coating agent for substrates - Fluorosurf

Gasoline-resistant moisture-proof coating agent for substrates - Fluorosurf

Conformal coating for automotive PCBs! Four times the moisture resistance of urethane and acrylic systems! No drying process required. Excellent gasoline resistance. Environmentally friendly.

The conformal coating agent for automotive circuit boards, "FloroSurf," is resistant to gasoline and is suitable for waterproofing and insulation protection of automotive electronic components, as well as for moisture-proof waterproof coatings to prevent ion migration on mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, and water and oil repellency with a thin film. 【Features】 ■ It is a non-flammable, low-odor liquid, making it safe to use! → FloroSurf is non-flammable and low in toxicity, thus exempt from PRTR law and fire service law regulations. It is also not classified as an organic solvent under the Industrial Safety and Health Act. ■ It has higher moisture and waterproofing properties compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ It is resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ We offer two types: FS-1610, which emphasizes gasoline resistance, and FG-3650, which focuses on protective performance, allowing for various choices to meet your needs. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • black_light.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Conformal Coating Examples] Proven performance for aircraft and automotive substrates.

[Conformal Coating Examples] Proven performance for aircraft and automotive substrates.

It has four times the moisture resistance of urethane and acrylic, protecting printed circuit boards from moisture and electrolytic solutions. It is classified as non-hazardous under the Fire Service Act and does not fall under organic solvents, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • バナーブルー_300_250.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coating agent example: Strongly protects printed circuit boards from moisture, acids, and electrolytes.

Coating agent example: Strongly protects printed circuit boards from moisture, acids, and electrolytes.

Fluorine coating is ideal for substrate moisture protection. It has four times the moisture and water resistance of urethane and acrylic coatings when dried at room temperature. It is non-flammable and not subject to fire safety regulations.

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. PFAS regulated substances are not used. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is non-flammable and low in toxicity, ensuring safety. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is not necessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case of Solvent-Free] Low-Odor Fluorine-Based Coating Agent Not Subject to Organic Solvents

[Case of Solvent-Free] Low-Odor Fluorine-Based Coating Agent Not Subject to Organic Solvents

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, it offers 3 to 10 times better moisture resistance (at the same film thickness). It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ It can be used safely as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Curing at room temperature takes only 5-20 minutes after application → No special equipment like heating furnaces is needed. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is semi-permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Examples of Acid Gas Countermeasures] Strongly protects printed circuit boards from acidic gases and moisture.

[Examples of Acid Gas Countermeasures] Strongly protects printed circuit boards from acidic gases and moisture.

It has four times the moisture resistance of urethane and acrylic, and protects the substrate from acidic gases and moisture with a thin film. It is classified as non-hazardous under the Fire Service Act and is not subject to organic solvent regulations, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed to protect printed circuit boards from acidic substances (such as hydrogen sulfide gas and lithium battery electrolyte). It provides strong protection for metals against acidic gases and liquids with a thin film, ensuring long-term protection for printed circuit boards. 【Reasons for choosing FG-3650】 ■ High protective performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are not required ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), so environmental measurements and organic solvent health checks for workers are not necessary, making on-site management easier ■ Dries at room temperature in a short time, no drying equipment required ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • black_light_test.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case of Solvent-Free] Conformal Coating Agent Not Subject to Organic Solvents

[Case of Solvent-Free] Conformal Coating Agent Not Subject to Organic Solvents

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in the Manufacturing Environment】 ■ It can be safely used as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example of substrate coating] Strongly protects the substrate from acids and moisture.

[Example of substrate coating] Strongly protects the substrate from acids and moisture.

It has four times the moisture resistance of urethane and acrylic, protecting the substrate from moisture and electrolytic solutions with a thin film. It is classified as non-hazardous under the Fire Service Act and is not subject to organic solvent regulations, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • black_light_test.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
<Free Sample Offered> Waterproof and Moisture-Proof Coating Agent for Electronic Circuit Boards

<Free Sample Offered> Waterproof and Moisture-Proof Coating Agent for Electronic Circuit Boards

Safe and secure with non-organic solvents. The "FluoroSurf FG-3650 Series" is suitable for conformal coating for waterproofing and insulation of electronic components.

The protective coating agent for electronic substrates, "FloroSurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. ▼ Excellent performance of FloroSurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidizing gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anti-fouling, low reflection, anti-reflective coating "UV hard coat agent additive"

Anti-fouling, low reflection, anti-reflective coating "UV hard coat agent additive"

<Free Sample Offer> Add a small amount to impart stain resistance and anti-reflective properties. Ideal for coatings on optical films and plastic touch panels!

The additive "FloroSurf FS-702X Series" from Floro Technology Co., Ltd. for UV hard coat agents can be added in small amounts to UV-curable acrylic hard coat agents to impart functionalities such as anti-fouling, low refractive index, slip properties, and water and oil repellency. It is suitable for surface modification of various plastic films, including plastic touch panels. 【Features】 - Effective with an addition amount of 1-3% - Low oil and grease sliding angle, demonstrating excellent fingerprint removal properties - Three types available based on compatibility with hard coat agents ～ Free samples are available exclusively for corporate clients! ～ Please indicate "Sample Request" using the [Contact Button] below.

  • Other optical parts
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case of Solvent-Free] Conformal Coating Agent Not Subject to Organic Solvents

[Case of Solvent-Free] Conformal Coating Agent Not Subject to Organic Solvents

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and not classified as an organic solvent, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness). It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → No need for management items such as workplace environmental measurements or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *Please contact us if you would like a free sample.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case of Solvent-Free] Insulating paint (coating agent) not classified as organic solvent.

[Case of Solvent-Free] Insulating paint (coating agent) not classified as organic solvent.

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying type insulation moisture-proof coating agent (conformal coating agent)

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for insulating protection and waterproofing of electronic components and mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone-based insulating coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating agent, free of regulated substances, compliant with SDGs.

Conformal coating agent, free of regulated substances, compliant with SDGs.

Room temperature quick-drying moisture-proof coating for circuit boards. SDGs environmentally friendly type (non-VOC organic solvent + non-hazardous + low odor + no regulated substances used).

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not contain VOC organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Furthermore, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has 4 times the moisture resistance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. - It also exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, providing rust prevention effects. - It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulation, waterproofing, and moisture-proof coating agent for substrates - Not subject to PFAS regulations.

Insulation, waterproofing, and moisture-proof coating agent for substrates - Not subject to PFAS regulations.

For waterproofing and insulation of electronic components, and moisture-proof and waterproof coating of mounting boards! Four times the moisture resistance of polyurethane and acrylic! Non-flammable and highly safe! *Samples available.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. ■ Non-flammable and low-odor, ensuring safe usage. There are no fire safety regulations. ■ Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. ■ Does not use PFAS regulated substances (such as PFOA, PFOS, PFHxS). *If you would like a free sample, please include "Sample Request" in your inquiry.

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safe moisture-proof coating agent for substrates: non-organic solvent + non-hazardous materials, no regulated substances used.

Safe moisture-proof coating agent for substrates: non-organic solvent + non-hazardous materials, no regulated substances used.

The fire protection law does not classify it as a hazardous material, and it can be safely used as it is not classified as an organic solvent, significantly reducing management items and equipment costs on-site. It provides strong protection for the substrate with high-performance moisture resistance and acid resistance.

The fluorosurf FG-3650 series protective coating for electronic substrates exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It is non-flammable and classified as a non-hazardous material under fire safety laws. This eliminates the need for certification at hazardous material handling locations, quantity management, and explosion-proof equipment management. It is also not classified as an organic solvent under the Industrial Safety and Health Act, so there is no need for organic health checks for workers or regular environmental measurements at the site. Current PFAS regulatory substances such as PFOS/PFOA are not used. *Currently, free samples are being offered. We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

  • IPROS61567518649095654966.jpeg
  • バナーブルー_300_250.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Moisture-proof coating agent for substrates, free of PFAS regulated substances, room temperature drying type.

Moisture-proof coating agent for substrates, free of PFAS regulated substances, room temperature drying type.

Waterproofing and insulation for electronic components, moisture-proof and waterproof coating for mounting boards! Four times the moisture-proof performance of polyurethane and acrylic! Non-flammable with high safety! Room temperature drying type.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as for moisture and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. PFAS-regulated substances are not used. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids. Also effective in preventing rust. ■ Non-flammable and low-odor, allowing for safe use. There are no fire safety regulations, significantly reducing management items. ■ Not classified as an organic solvent. ■ Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating agent, not subject to PFAS regulations, non-hazardous material.

Conformal coating agent, not subject to PFAS regulations, non-hazardous material.

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle, keeping the workplace clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *If you would like a free sample, please contact us.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating for circuit boards, environmentally friendly, SDGs measures.

Conformal coating for circuit boards, environmentally friendly, SDGs measures.

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The "FloroSurf FG-3650 Series" protective coating agent for electronic circuit boards (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. [Advantages in Manufacturing] Perfectly aligns with SDGs - Non-flammable and low-odor liquid, allowing for safe use → Safe due to being non-flammable and low toxicity. Exempt from PRTR law and fire safety regulations. No need for explosion-proof equipment or quantity management. - Not classified as an organic solvent under occupational safety and health law → Eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. - Cures at room temperature in 5-20 minutes after application! → No special equipment or processes like heating furnaces are required. - Low viscosity makes it easy to handle, keeping the workplace clean. - Pot life is virtually permanent, resulting in zero waste. - Repairs are possible after coating. *Please contact us if you would like a free sample.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • バナーブルー_300_250.jpg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safe and secure conformal coating agent, exempt from various regulations.

Safe and secure conformal coating agent, exempt from various regulations.

Unlike UV-curable and thermosetting types, it leaves no uncured components and is highly reliable. It dries quickly at room temperature in 5 minutes, eliminating the need for a drying process. Non-flammable and does not contain organic solvents.

The "FloroSurf FG-3650 Series" electronic substrate protective coating (conformal coating) has numerous achievements in waterproofing and insulation protection for automotive substrates and electronic components, as well as in moisture-proof and waterproof coatings for mounted substrates. 【Performance Features】 ■ Higher moisture-proof and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. It minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Unlike reactive coatings (silicone, UV acrylic, etc.) that leave unreacted components that can affect properties, this product does not leave unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failure of electrical contacts after application. ■ Resistant to acidic substances such as lithium battery electrolytes! → Prevents fire accidents. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

  • black_light.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal Coating Case Study: Prevention of Leakage in Electronic Circuit Boards Due to Condensation

Conformal Coating Case Study: Prevention of Leakage in Electronic Circuit Boards Due to Condensation

High insulation and high water-repellent conformal coating. The fluorine film protects the printed circuit board from moisture and humidity. Non-flammable and highly safe. Free from regulated substances.

The conformal coating agent FluoroSurf FG-3650 series is a specially designed coating agent for waterproofing and insulation protection of electronic components, as well as for moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings, and it exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in 5-10 minutes with room temperature drying! It is non-flammable and not subject to fire safety laws, nor is it classified as an organic solvent under occupational safety and health laws, significantly reducing management items and equipment costs on-site. Fluorinated regulated substances (such as PFOS, PFOA, PFHxS, etc.) are not used. *Free samples are available upon request (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

  • black_light_test.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Moisture and waterproof coating agent for substrates used in aerospace applications.

Moisture and waterproof coating agent for substrates used in aerospace applications.

Moisture-proof and waterproof coating agent that protects the substrate of aerospace equipment and improves reliability.

In the aerospace industry, high reliability is required, and the protection of electronic circuit boards is essential. Exposure to temperature changes, vibrations, electromagnetic waves, and corrosive substances in outer space or at high altitudes can lead to failures in electronic equipment. Our coating agents for circuit boards protect them even in these environments and contribute to improving the reliability of the equipment. 【Application Scenarios】 - Moisture-proof, waterproof, and insulation protection for electronic circuit boards in aircraft and spacecraft - Protection of electronic devices used in harsh environments - Protection of electronic components from vibrations and shocks 【Benefits of Implementation】 - Reduced risk of electronic circuit board failures - Extended lifespan of equipment - Reduced maintenance costs

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coating agent for circuit boards for industrial machinery

Coating agent for circuit boards for industrial machinery

Protecting industrial machine circuit boards and achieving long lifespan!

In the industrial machinery industry, circuit board failures can lead to operational downtime and significant losses. Especially in industrial machinery used in harsh environments, moisture and waterproof measures for circuit boards are essential for prolonging product lifespan. Our coating agents for circuit boards offer four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings, protecting circuit boards in industrial machinery from moisture and corrosion. This reduces the risk of failure and contributes to stable operation. 【Usage Scenarios】 - Machine tools - Control panels for manufacturing lines - Outdoor measuring instruments - Electronic devices used in harsh environments 【Benefits of Implementation】 - Prevents corrosion and rusting of circuit boards - Enhances product reliability - Reduces maintenance costs - Extends product lifespan - Increases operational efficiency

  • Coating Agent
  • Substrate Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.