東伸 List of Products and Services

The "packing cart" is a product equipped with casters and a handle, allowing for smooth movement. When pulling out packing film, it features a feeding structure that prevents the film from being dispensed too much with a pressure roller. It is designed to make it easy for women to work. Additionally, it has a groove for a knife to neatly cut the packing film, and it can accommodate two types of packing film at the foot of the cart. 【Features】 ■ The cart is equipped with casters and a handle for smooth movement. ■ The height of the cart is set lower, allowing for easy operation even for women. ■ It has a groove for a knife to neatly cut the packing film. ■ The feeding structure prevents the film from being dispensed too much with a pressure roller. ■ The height of the rails can be freely adjusted. *For more details, please refer to the PDF document or feel free to contact us.

• Trolley
• Other packaging machines

We would like to introduce our paper tube cutting machine, the "SCK Series." This machine can accurately and quickly cut paper tubes to any desired length as needed, allowing for large-scale processing through continuous operation. Additionally, the "E Series" is equipped with a chamfering machine that performs chamfering tasks swiftly. The chamfering device is a tabletop model that is easy to install, operates on 100V power, and weighs 10kg. Please feel free to contact us if you have any inquiries. 【Features】 ■ Accurately and quickly cuts paper tubes to any desired length as needed ■ Capable of large-scale processing through continuous operation ■ E Series: Equipped with a chamfering machine that performs chamfering tasks swiftly ■ Chamfering device - Tabletop model that is easy to install; cutter can be easily replaced with commercially available NT blades - Operates on 100V power, weighs 10kg *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• Other processing machines

We would like to introduce our independently installed ear winding machine, the "EW Series." It is ready for use immediately after supplying power. With a simple structure and advanced control through a vector motor, it can wind ears at high speeds with low tension. The weight of the "EW35-40VII-SCA" is approximately 120 kg, and its power is controlled by a dancer for speed regulation. We also have various other ear winding machines available, so please feel free to contact us when needed. 【Specifications (excerpt)】 ■ Model: EW35-40VII-SCA ■ Winding Speed: 0–400 m/min (normal use: 0–350 m/min) ■ Winding Diameter: Φ350 mm ■ Core Inner Diameter: 3 inches (Φ76.2±0.5 mm) ■ Power: Speed control by dancer *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "EWXi" is a shaftless, toggle clamp type ear winding machine that makes core replacement easy. With improvements in winding method, tension control, ear pass, and control system, it achieves an industry-leading speed of 700 m/min (available only for EWXi-S). Additionally, taper winding is possible with servo synchronous control. We also offer various types of ear winding machines, so please feel free to contact us. 【Features】 ■ 50% increase in winding capacity ■ Easy core replacement with shaftless, toggle clamp method ■ Easy removal of ear waste rolls due to vertical winding structure ■ High-speed winding capability ■ Achieves consistent winding without unevenness through servo synchronous control ■ NEW dancer allows for non-stop winding of easily breakable ears *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

"KTZ" is a dual-sided inspection rewinder that allows heavy raw materials to be mounted directly from a cart, reducing equipment costs within the factory. It inspects both sides simultaneously using an image processing inspection device. Defects on the backside are automatically sent to a visual inspection panel within the arch, while defects on the front side are sent to a winding visual inspection panel, where the process stops. The types of inspection machines and special conditions can also be accommodated as options, and we propose appropriate work procedures to prevent the occurrence of uninspected areas during the inspection process. [Features] ■ Provides a high-quality inspection environment ■ Simultaneous inspection of both sides using an image processing inspection device ■ Shaftless design for unwinding and rewinding (with hydraulic lift option) ■ Reduces equipment costs within the factory ■ Proposes work procedures to prevent the occurrence of uninspected areas *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Other processing machines

The "KWZ-T" is an inspection machine that improves operability and visibility by 20% in space-saving compared to conventional models, allowing for effective use of space. The winding and unwinding arms can achieve close winding through hydraulic proportional control. Additionally, the standard adoption of multi-point tension control has further enhanced winding quality. By adopting an all-digital, high-speed control system, it achieves over ten times the control performance compared to conventional models. 【Features】 ■ Effective use of space ■ 20% space-saving compared to conventional models ■ Evolved high-precision tension control ■ Over ten times the control performance compared to conventional models ■ Standard adoption of multi-point tension control ■ Close winding possible with hydraulic proportional control for winding and unwinding arms *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

The "KWR/KWZ" is a rewinder that stops automatically at the visual position of defect signals from an image processing inspection machine. It adopts a shaftless design for unwinding and rewinding (with a hydraulic lift option). Heavy raw materials can be directly mounted from a cart, reducing equipment costs within the factory. Additionally, options are available for different types of inspection machines and special conditions, allowing for the proposal of appropriate work procedures to prevent uninspected areas during the inspection process. 【Features】 ■ Adopts a shaftless design ■ Allows direct mounting of heavy raw materials from a cart ■ Reduces equipment costs within the factory ■ Automatically stops at the visual position of defect areas ■ Options available for different types of inspection machines and special conditions *For more details, please refer to the PDF document or feel free to contact us.

• Defect Inspection Equipment
• Other inspection equipment and devices
• Other processing machines

The "CFR" is a slitter for thin film electronic materials that can slit and wind up thin materials such as capacitors with ultra-low tension control. The machine features a compact design and can be operated from various directions, achieving space-saving installation. Additionally, it is easy to operate with a simple swing arm mechanism, and operating conditions can be stored in the internal memory via a touch panel. 【Features】 ■ Capable of ultra-low tension control ■ Combination of surface and center drive ■ Easy operation with a simple swing arm mechanism ■ Compact design allows operation from various directions ■ Space-saving installation ■ Easy management of products *For more details, please refer to the PDF materials or feel free to contact us.

• Bag making machine/slitter

The "ASR" is a slitter for adhesive tape that makes it easy to mount heavy raw materials. The winding is cantilevered, allowing for easy installation of the product's discharge core. Additionally, the distance from the slit to the product is always short and consistent, ensuring stable product quality. We also offer various types of slitters for adhesive tape, so please feel free to contact us when needed. 【Features】 ■ The distance between the slit and the product is consistently short ■ The raw material mounting is equipped with a hydraulic lifting device, making it easy to mount heavy raw materials ■ The winding is cantilevered, making it easy to install the product's discharge core ■ Options: round blade device, raw material hydraulic lifting device, product discharge device *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

The "FAR" is a two-axis, two-stage turret-type slitter that adopts a close winding method and corrects the position with groove rolls while winding up. Operating conditions can be stored in internal memory via a touch panel, making product management easy. Additionally, the cutter section is box-type, allowing for external setup and pre-preparation of blades. Please feel free to contact us when needed. 【Features】 ■ Improved productivity by allowing product retrieval and core pre-installation during operation ■ Adopts a close winding method ■ Winds up while correcting the position with groove rolls ■ Capable of absorbing diameter differences caused by thickness variations during winding ■ Allows for external setup and pre-preparation of blades ■ Operating conditions can be stored in internal memory via a touch panel *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

The "LXR" is a high-speed slitter with a two-tier horizontal moving design that features a memory function for internal storage, making it easy to manage variety parameters. The winding is done using a contact method, where the arm retreats horizontally according to the winding diameter. This allows for constant contact pressure directed towards the center of the product, enabling control from low contact pressure regardless of tension, significantly improving product quality. Additionally, we offer a wide range of options such as a round blade device, an automatic cutter positioning device, and an integrated ear winding machine. Please feel free to contact us. 【Features】 ■ Winding uses a contact method with the arm retreating horizontally according to the winding diameter ■ Wound products are equipped with a product unloading loader from the front (optional) ■ Minimal installation space required as products are not extracted from the side of the machine ■ Custom taper settings are possible ■ Memory function for internal storage makes it easy to manage variety parameters *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

The "DXE" is an overhead type primary slitter that adopts a method of tilting the wound product down to a cart after winding, allowing for labor-saving and high productivity. Winding is done using a contact method, where the arm swings away according to the winding diameter, enabling control of appropriate contact pressure that is not affected by product weight. Additionally, it can be designed to fit the layout of the factory as an option, so please feel free to contact us when needed. 【Features】 ■ Adopts a method of tilting the wound product down to a cart ■ Allows for labor-saving and high productivity ■ Operating conditions can be set with any taper ■ Has a memory function for internal storage, making it easy to manage product parameters ■ Product discharge methods can be designed to fit the factory layout (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

The "LSR" is a slitter that enhances support information for operators. With the product drawn out from the winding shaft, the next core is set, and winding begins. During product winding, packaging work can be performed, allowing for efficient slitting processing. Additionally, it standardly employs multi-point tension control, enabling detailed tension condition settings that were difficult with a two-point control system, such as "a little harder on the winding core." 【Features】 ■ Various information necessary for slitting processing can be confirmed on-site ■ Standard adoption of multi-point tension control ■ Detailed tension condition settings are possible ■ The unwinding arm can be fixed with a hand switch ■ Standard equipped with a hydraulic lifting device *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

The "TNR" is a versatile slitter that not only features conventional linear taper control but also allows for arbitrary tension settings from 2 to 10 points. It adopts a single-touch roll with air pressure and expands the maximum winding diameter to 460mm, enabling high-speed winding. Additionally, it enhances cost performance by standardizing options available in conventional models, and the unwinding arm can be fixed with a hand switch. 【Features】 ■ Standard multi-point tension control ■ Manual EPC left-right fine adjustment ■ Unwinding arm can be fixed with a hand switch ■ Increased information on the operation panel ■ Focus on space-saving and operability *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

The "eR!" we handle is a lightweight, compact, high-speed universal rewinder. It has one of the smallest installation footprints in the industry and is easy to relocate with its casters. Additionally, it comes standard with a lifting device, allowing for high-speed transport at 400m/min. With a warning light visible from all directions, a sharp appearance in bright colors, and effective covering, it is a safe and reliable product. 【Features】 ■ Intuitive operation ■ Wide tension range: 20–250N ■ Improved tension accuracy ■ Standard equipped with proximity rollers ■ One of the smallest installation footprints in the industry ■ Simple structure *For more details, please refer to the PDF document or feel free to contact us.

• Paper Converting Machinery
• Other processing machines

The "eS!" is a high-speed compact general-purpose slitter that is easy to relocate with casters and has been made 40% lighter compared to conventional models. It features a warning light that is visible from all directions and effective covering. With high-speed slitting at 500m/min, a unwind diameter of 1,000mm, a rewind diameter of 600mm, and a 40% reduction in operating steps, it aims to improve productivity. Additionally, various convenient options are available. 【Features】 ■ Safe, secure, and innovative work experience ■ Environmental compatibility and adaptation to new materials ■ Significant improvement in productivity ■ Lightweight and compact *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

Toshin Corporation has a long history as a comprehensive manufacturer of slitters and rewinders. Our pride lies in the accumulation of years of achievements, having been continuously chosen by customers in a wide range of fields, including food, daily necessities, and digital devices. However, our challenge in manufacturing has no end. We aim to continue being a presence that receives feedback like "Let's consult with Toshin" and "Toshin can make it," and we will strive to create new value in manufacturing. 【Business Description】 ■ Development, design, manufacturing, and sales of industrial automation equipment and systems *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter
• Other machine elements
• Contract manufacturing

This product is a compact rewinder capable of winding large diameter products with a winding tension range of 3 to 60N. Its simple structure allows for a reduced installation area, making it easy to handle. 【Features】 - Tension range and winding diameter are top-class in the industry - Supports high-speed operation - Achieves space-saving layout on-site - Compact and simple structure for easy handling *For more details, please download the PDF or feel free to contact us.

• Winding Machine

The TAF DRIVE SERIES, a new air friction shaft from Tohshin, will change the common understanding of slitting. By separating the air supply into two systems and decoupling the winding tension from the core chuck control pressure, the tension range limit that previously existed to secure core chucking force has been eliminated. Furthermore, by optimizing the material and arrangement of the friction material, we achieve one of the largest tension ranges in the industry with high precision, allowing for high-quality winding of all types of materials, from ultra-thin to thick products, as well as slippery and stretchable materials. 【Features】 ○ Thin! Stretchable! Thick! ○ Maintenance cycle of 6,000 hours → A significant improvement in the maintenance cycle by reviewing the main body material and gripping mechanism ○ Improved quality of wound products → The lag pause mechanism reduces paper dust generation and allows for adjustment of the module engagement count ○ Standard equipment on various slitters, including Tohshin's standard slitter For more details, please contact us or download the catalog.

• Bag making machine/slitter
• Other machine elements

The "SNR" is a versatile slitter that enhances cost performance and incorporates options from conventional models as standard. Technicians directly gathered requests from over 50 sites and renewed the design with a strong focus on usability in the field based on their feedback. It displays various support information for operators, such as "slip alarm for the drive roll," contributing to the prevention of operational mistakes and reduction of losses. 【Features】 ■ Standard adoption of multi-point tension control ■ In addition to conventional linear taper control, tension can be set arbitrarily from 2 to 10 points ■ The unwind arm can be fixed with a hand switch ■ Improves working posture, enhancing workability and safety ■ Displays speed and winding length on the auxiliary control panel ■ Increases information on the operation panel *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter

The compact rewinder "QWR-A-6FBQR" has increased its winding speed from 200m/min to 300m/min, further enhancing production efficiency. Additionally, the standard adoption of a pressurized touch roll has improved the quality of the wound products. For more details, please download the catalog.

• Bag making machine/slitter
• Other packaging machines

The large-diameter high-speed slitter "LSR-A-13FCJA" has reduced physical strain during the extraction of rolled products and enhanced work safety. It provides operators with support information such as "reference setting values for operating conditions" and "drive roll slip alarms," contributing to the prevention of work errors and reduction of losses. Additionally, it allows for arbitrary tension settings from 2 to 10 points, not just the conventional linear taper control. By placing the switch box closer to the operator, work efficiency and safety have improved. For more details, please download the catalog.

• Bag making machine/slitter

We will deliver machines with high performance and exceptional stability by consolidating the advanced technical skills and know-how cultivated through custom-made production, incorporating improvements without overlooking even the smallest components, and carefully capturing customer feedback and requests in our designs.

• others

All-in-One Doctor Machine (Inspection Machine) Completed! 【Features】 ○ Built-in inspection machine for space-saving! ○ Wide tension range enabled by dancer roll control! ○ Standard adoption of pressure touch roll ○ Standard adoption of remaining amount stop function ○ Automatic rewind function added for multiple defects ● For more details, please contact us or download the catalog.

• Other mounting machines