三興商事 List of Products and Services

"Exremove" is a deodorizing machine that takes in indoor air and breaks down odor-causing substances through the action of generated ozone. In addition to the "wall-mounted type," which allows for four levels of ozone generation adjustment, we also offer a "ceiling-embedded type" that can finely set the operating time. It not only provides deodorizing effects against unpleasant odors but also offers sterilization effects. 【Features】 ■ No complicated settings or operations required ■ Equipped with a quick operation mode (wall-mounted type) ■ ON/OFF operation can be set at 15-minute intervals (ceiling-embedded type) ■ Easy maintenance of the ozone generator ■ Initial setting does not exceed the environmental standard concentration of 0.06 ppm as per the Basic Environmental Law (Standard values: 24 hours a day, 365 days: 0.06 ppm; 8 hours a day, 365 days: 0.1 ppm) *For more details, please refer to the materials. Feel free to contact us as well. Currently, development of a tabletop type is underway, and advance trial sales are also possible.

• Other safety and hygiene products

The "Furecon Suction Frame" is a direct suction frame for Furecon materials that allows the use of Furecon bags as storage tanks without the need to create various raw material tanks, eliminating suction failures, clogs, and leftover materials stored inside the Furecon. As the materials inside the Furecon bag become lighter, they are lifted by a spring balancer, guiding all the materials to be discharged completely. 【Features】 - It is inexpensive, simpler, and easier to purchase compared to other Furecon internal material suction devices, discharge devices, suction devices, and extraction devices, while also providing good usability, ensuring that all materials in the Furecon bag are reliably discharged. - By preparing multiple units and using a transport route switching system, a large-capacity storage state can be created, allowing for continuous raw material supply. - For crushed materials that are difficult to transport via discharged air, an optional discharge promotion unit can be added to supply materials to the line without bridging. - Unlike systems that suction from above, it prevents foreign matter contamination. - It can transport materials from one frame to multiple locations. - It is compatible with large-diameter piping and long-distance transport. *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

We would like to introduce our air-cooled pelletizers, 'e・PELLETER/c・PELLETER'. The 'e・PELLETER' is a pelletizer designed for molding factories that cuts molten strands from an extruder into pellets. The 'c・PELLETER' is a pelletizer that instantly pelletizes runners in accordance with the molding cycle. Please use them according to your application. 【Features of e・PELLETER】 ■ Revolutionary ■ Economical ■ Easy ■ By adopting a special ultra-short screw, it minimizes the degradation of resin quality to the utmost ■ As it is air-cooled, pre-drying before molding is unnecessary *For more details, please refer to the PDF document or feel free to contact us.

• Granulating Equipment

"CraftPat" is a monitoring system that visualizes the equipment information of the entire compound factory, making it easy to analyze. By becoming a standard package software for the compound industry, we achieve a reasonable price. The monitoring screen allows for a quick understanding of the operational status of the manufacturing line and is equipped with a wealth of features that aid in the early detection and recovery from troubles. [Features] ■ Visualizes the equipment information of the entire compound factory for easy analysis ■ Monitoring screen that clearly shows the operational status of the manufacturing line ■ A wealth of features that help in the early detection and recovery from troubles ■ Traceability through Excel reports ■ Achieves a reasonable price *For more details, please refer to the PDF document or feel free to contact us.

• Surveillance Camera System
• Production Management System
• Process Control System

The "NX Feeder" is a weight-based feeder that pursues high quality through consistent domestic in-house production from the digital load cell (weight sensor) to the feeder. With a diagonal agitator and a densely packed structure, it stabilizes the supply of raw materials to the screw and achieves high supply accuracy. The simple structure and fewer disassembly parts ensure good workability during disassembly and cleaning, reducing the hassle of changing raw materials. 【Features】 ■ High and stable supply accuracy ■ Compatible with a wide range of raw materials ■ Easy maintenance ■ Consistent domestic in-house production from the digital load cell (weight sensor) to the feeder ■ Stabilized raw material supply to the screw with a diagonal agitator and densely packed structure *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

Sankyo Shoji Co., Ltd. handles products from Toho Daishin Co., Ltd. The company provides product, service, and solution offerings for conveying line systems and logistics system equipment. We offer a lineup including the simple lift "Air-Powered Unit Series" using air hoses, as well as the "Side Running Conveyor Series." 【Products Offered】 ■ Air-Powered Unit Series ■ Side Running Conveyor Series ■ Magic Checker ■ Pocket Conveyor ■ Skip Type Electric Lifting and Reversing Machine *For more details, please refer to the PDF materials or feel free to contact us.

• Transport and handling robots
• Conveyor
• lift

Our company handles a variety of products, including the 'Material Supply System' from MOTAN, which features a resin dryer with a proven track record in the production of PET preforms, as well as domestic recycling equipment. We can provide comprehensive proposals tailored to production scale and installation conditions, covering recycling, storage, transportation, drying, mixing, and supply to injection molding machines. For the various equipment in the material supply system, we can standardly offer an OPC UA interface that contributes to the "IoT transformation" of plastic molding processing. 【Features】 ■ Standard lineup of equipment that can accommodate large production machines ■ The material supply system is compatible with communication standards "EUROMAP 77 and 83" ■ Enables high-efficiency pellet drying, contributing to reduced power consumption *You can view details of the material supply system via "PDF Download." Please feel free to contact us with any inquiries.

• others

The "αGel Oil Stopper" is a clay-like repair material that absorbs oil leaked from hydraulic device valves and flanges, preventing the spread of oil leaks. When applied to cover the leak area, it solidifies into a rubber-like consistency. It can be easily applied without the need for surface preparation such as scraping or specialized tools, contributing to a reduction in repair time. Additionally, while it excels in sealing against the adhesive surface, it allows for easy removal. It can be used not only for oil but also for leaks of hazardous liquid substances. 【Features】 ■ Excellent sealing performance even with grease on the adhesive surface ■ Pre-treatment only requires the removal of dirt, dust, and moisture ■ Excellent electrical insulation properties ■ Retains oil absorption even after curing *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Repair Agent

We handle the "Material Supply System" from MOTAN, a global provider of plastic raw material handling systems. By integrating the control of each process from storage, drying, transportation, supply, to mixing into the control panel of the molding machine, we achieve centralized management. This contributes to improved efficiency, productivity, and competitiveness, and supports the Fourth Industrial Revolution and IoT in plastic molding processing. 【Features】 ■ Utilizing Industry 4.0, equipment control is centralized in the molding machine, making data and manufacturing process management easier. ■ Compliant with EUROMAP77, with plans to support EUROMAP86 by the end of 2019. ■ OPC UA interface is available as standard, allowing data communication with Manufacturing Execution Systems (MES). ★ We will be exhibiting at "K 2019" held in Düsseldorf, Germany, starting October 16. Please stop by as we will have staff available who can assist in Japanese. *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• others

I believe that regular calibration is being conducted for measuring instruments such as digital multimeters, calipers, thermometers, and scales. Similarly, wouldn't flow meters also require regular calibration? At Sanko Shoji, we have launched a new service called 'Flow Meter Calibration Service.' By conducting regular calibration throughout the product lifecycle of flow meters, we provide reliable measurement traceability. 【Features】 ■ JCSS calibration for flow meters up to 1200mm in diameter ■ JCSS calibration possible for flow rates up to 6000m3/h, allowing for a wide range of calibration ■ Calibration test lines are composed of stainless steel piping ■ Overflow-type elevated water tank ensures stable flow rates ■ Calibration of flow meters from other manufacturers is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

Sankyu Corporation handles products provided by Shimadzu System Solutions Co., Ltd. The company not only offers equipment but also provides calibration of flow meters, builds and constructs systems that meet customer requirements by combining various devices, and offers maintenance and inspection services after delivery, establishing a comprehensive system from technical development to system proposals and services. 【Business of Shimadzu System Solutions】 ■ Monitoring and Control Systems Business ■ Flow Measurement and Monitoring Business ■ Service Business ■ Flow Meter Calibration Business *For more details, please refer to the PDF materials or feel free to contact us.

• Instrumentation and Control Systems
• Other security and surveillance systems
• Flow Meter

This catalog introduces the "Comprehensive Control System" handled by Sanko Shoji. It features a wide range of products, including the decentralized control system "METRIS-G4 PLUS," which boasts a track record of deliveries to various plants such as power, environment (waste incineration plants), energy, water supply (water purification plants), steel, and gas, as well as PLC instrumentation systems and remote monitoring control systems. [Featured Products] ■ Decentralized Control System "METRIS-G4 PLUS" ■ Control System "MS-ONE" ■ Compact Decentralized Control System "METRIS-mini" ■ PLC Instrumentation System "FS2000" ■ Integrated Remote Monitoring Control System "2000 Series" *For more details, please refer to the PDF materials or feel free to contact us.

• Instrumentation and Control Systems

The T780 series is an electromagnetic flowmeter equipped with a variety of intelligent features, including remote operation capabilities via communication and self-diagnostic functions. It consists of the detector "T780F," the converter "T785F," and the palm-top communicator "PTC-700." By simply connecting the palm-top communicator to the analog output signal line of the electromagnetic flowmeter, you can perform operations such as setting various parameters, displaying measurement values and self-diagnostic results, and calibrating zero and span. 【Features】 ■ Achieves compactness and lightweight design ■ Significantly reduces the distance between the detector's electrodes ■ Maintains high accuracy of 0.5% against indicated values ■ Equipped with a wealth of intelligent features ■ Uses strong lining even under negative pressure conditions ■ Shared AC/DC power supply *For more details, please refer to the PDF materials or feel free to contact us.

• Flow Meter

The "ACO Jet Separator" is a wind-powered classification device with high separation performance. It removes fluff from plastic pellets. It also eliminates charged fine powders from granulated products and is suitable for separating foreign materials from crushed materials and grains. It features a sanitary design that allows for easy inspection and cleaning, with zero retention areas. 【Features】 ■ High separation performance ■ Sanitary design for easy inspection and cleaning ■ Removes charged fine powders ■ Zero retention areas ■ Patent obtained *For more details, please refer to the PDF document or feel free to contact us.

• Separation device

This catalog features a wide range of products manufactured by Marutani Kako Co., Ltd., which we handle. With over 70 years of achievements and trust, we offer technology, design, manufacturing, and after-sales support from plant to lab size. We introduce a variety of products, including "AUTO-PUREX SE," which reduces annual running costs by up to one-third, as well as "AUTO-PUREX LQ" and "AUTO-PUREX MHS." [Contents (excerpt)] ■AUTO-PUREX SE: Energy-saving compressed air dehumidifier ■AUTO-PUREX LQ: Adsorption purification device for liquids ■AUTO-PUREX G: Adsorption purification device for gases ■AUTO-PUREX H2PSA: Hydrogen adsorption purification device ■AUTO-PUREX F: Dryer/compressed air for instrumentation in nuclear power plants *For more details, please refer to the PDF document or feel free to contact us.

• Dehumidifier
• others

This document is the English version of the comprehensive catalog for "Korean-made valves." Custom-made valves can be produced to meet customer needs. We have achieved short delivery times and low costs. We have many achievements in Japan, and the documentation is available in Japanese. 【Features】 ■ Short delivery times available ■ Documentation available in Japanese ■ Low cost ■ Many achievements in Japan * For more details, please refer to the PDF document or feel free to contact us. * The English version of the catalog can be downloaded.

• valve

This document is the English version of the comprehensive catalog for "Powder Valves." We can manufacture a wide range of valves, including ball valves, gate valves, and diverter valves. With high cost competitiveness, documents are available in Japanese. Additionally, we can customize production to meet customer needs. ■ A wide lineup of powder valves ■ High cost competitiveness ■ Documents available in Japanese ■ Customized production to meet customer needs *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• valve

Our company, a comprehensive trading company for industrial plant equipment, handles various types of crushers. In this catalog, we introduce equipment capable of crushing, shredding, and micronizing. We offer a rich lineup, including the "LC type" and "PS type" dedicated crushers that adopt a screenless mechanism, achieving low rotation and low noise. [Contents (excerpt)] ■ Standard crushers ■ Special crushers ■ Shredders ■ Micronizers, cutting, and sewage-specific shredders ■ Granulators, pelletizers, and more *For more details, please refer to the PDF materials or feel free to contact us.

• Crusher
• Crusher
• Fine grinding machine

【Features】 ■ Cost advantages ■ Documents can be provided in Japanese ■ Compatible with round and square shapes ■ Compatible with rubber and metal * For more details, please refer to the PDF document or feel free to contact us. * This PDF is available in English.

• others

The "Sanitary Crusher" is a device that instantaneously pulverizes materials placed inside the container using ultra-high-speed rotating crushing blades. Its crushing capability is outstanding, making it suitable for various materials, including food and pharmaceuticals. It can be disassembled and cleaned, allowing for hygienic use. Not only can it pulverize hard raw materials, but it is also compact, taking up minimal space. 【Features】 ■ Instantaneous pulverization of materials placed inside the container ■ High crushing capability ■ Can be disassembled and cleaned for hygiene ■ Usable in a space equivalent to one A4 sheet of paper ■ Equipped with a standard safety limit switch *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

The "Tablet Molding Machine" is a continuous molding machine that directly pours and fills from the feed box into the mold. The lower ram rises under pressure, and the die floats in reverse, achieving dual-axis molding. By directly pouring and filling from the feed box into the mold, unnecessary strokes are eliminated, allowing for a reduction in molding time. Additionally, since there is no scraping, scratching unevenness does not occur. 【Features】 ■ No unnecessary strokes ■ No front-and-back movement of the powder mass ■ No upper ram movement during no-load conditions ■ Thin material filling is possible due to the absence of scraping caused by the powder mass *For more details, please refer to the PDF document or feel free to contact us.

• Powder Molding Machine

The "NT Heater Press" is a press machine that achieves a parallelism of 20μm between the upper and lower heating plates (when the heating plate is 100mm square). We offer three types tailored to different applications: wave type, electric type, and handy type. By adopting a vacuum frame, it enables heating and gas replacement heating under vacuum conditions. Furthermore, the use of an ultra-high-pressure hydraulic system has realized low noise, lightweight, and compact design. 【Features】 ■ Precision grinding processing and a four-column frame are employed ■ A vacuum frame is attached to the heating plate ■ Heating and gas replacement heating under vacuum conditions are possible ■ Ultra-high-pressure hydraulic system adopted ■ Achieves low noise, lightweight, and compact design *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device
• Other processing machines

"Clean Shot" is a removal device that can safely and reliably remove polymers that are strongly adhered to various metal parts in manufacturing sites such as plastic molding, pelletizing, and wire manufacturing, all within a short working time. It has a very high cleaning effect in areas where brushes and jigs cannot be used, such as inside narrow and long holes or curved holes. The standard abrasive material used in the blasting process consists of extremely fine particles (85-125μ) of glass beads, which provide stable cleaning effects even on complexly shaped parts. [Features] - Short working time - Minimal impact on parts - Wide range of applications - Environmentally friendly - Easy installation *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

We would like to introduce the "Radial Vane Pump" manufactured by Fukko Metal Industry, handled by Sanko Shoji. Multiple vanes (movable blades) are radially attached to the rotor. Since the rotor is eccentric to the pump casing, the volume of the space formed by the two vanes and the casing expands and contracts repeatedly with rotation. It is suitable for transferring liquids that should not be agitated. 【Features】 ■ Works well with high viscosity and foamy liquids ■ Completely self-priming ■ Customizable for harsh conditions ■ No residual liquid left at the bottom of the drum ■ Quick cleaning of contact parts *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Dual-Screw Pump" manufactured by Fukko Metal Industry, handled by Sankyo Shoji. The high-speed rotation of the screws generates powerful suction. It is a fully self-priming type, allowing operation without the need for priming water. Furthermore, it can handle a wide range of viscosities from low to high with a single pump, achieving efficiency and quality assurance for tasks ranging from fluid transfer to CIP cleaning. 【Features】 ■ Powerful suction ■ Non-contact rotating parts ■ Suitable for high-concentration slurries ■ Structure designed for disassembly and cleaning ■ Low noise and low vibration *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce "Emile," a product handled by Sanko Shoji and sold by Nihon Chisui Hanbai Co., Ltd. This product is a new water treatment system that fills montmorillonite-based ceramics and uses the flow rate of water passing through from below to move the ceramics. This creates an electric double layer, thermoelectric conversion effects, cation exchange capacity, and other actions between water and ceramics, resulting in treated water being positively charged. 【Features】 ■ For commercial use ■ Penetration power / cleaning power / antioxidant power / antibacterial effect ■ Operates semi-permanently without the need for power other than water flow ■ Hybrid patented technology *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment

At Sanko Shoji, we handle pumps from Tsurumi Manufacturing. This document includes examples of installations such as mobile dewatering vehicle equipment equipped with a multi-plate screw press dewatering machine (MDC type), as well as pH neutralization treatment equipment, along with photographs. [Published Examples] ■ Mobile Dewatering Vehicle Equipment ■ Rainwater Adjustment Pond Drainage Equipment ■ pH Neutralization Treatment Equipment ■ Sewage Treatment Equipment ■ Equipment for Geothermal Power Plants *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment

We would like to introduce the "submersible pumps" from Tsurumi Manufacturing, handled by Sanko Shoji. These pumps are highly effective in various scenarios involving seawater. Our lineup includes the "B type," equipped with a non-clog impeller, and the "BZ type," which has a 100% foreign object passage diameter. They can also be used for port and shoreline improvement projects, as well as seawater intake and drainage facilities. 【Product Lineup】 ■ For Equipment - B type, BZ type, C type, U type, UZ type, SF type ■ For Construction Projects - KRS type, KTZ type, LH type, GSZ type, NKZ type, SHD type *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Submersible Pump" from Tsurumi Manufacturing, handled by Sanko Shoji. It features an explosion-proof structure suitable for atmospheres with high risks of explosive gases and vapors. It is a certified product that has passed the type examination for explosion-proof electrical machinery and equipment. 【Features】 ■ For pressure-resistant explosion-proof use ■ Suitable for flammable atmospheres ■ Certified product that has passed the type examination for explosion-proof electrical machinery and equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

We would like to introduce the "Multi-Plate Screw Press Dewatering Machine" from Tsurumi Manufacturing, handled by Sanko Shoji. It enables a highly efficient and unique concentration and dewatering process. It can be used for various mixed sludges, including surplus sludge after biological treatment, pressurized floating floss, and coagulated sediment sludge. 【Features】 ■ For sludge dewatering ■ Highly efficient and unique concentration and dewatering process ■ Usable for various mixed sludges *For more details, please refer to the PDF materials or feel free to contact us.

• Other water treatment equipment

We would like to introduce the "Multi-Disc Type Dehydrator" from Tsurumi Manufacturing, handled by Sanko Shoji. It is a compact type that uses resin discs while demonstrating dehydration performance equivalent to conventional machines. With one-touch operation, it can be operated automatically, and by using the special accessory of a polymer coagulant dissolving device, continuous operation is possible. 【Features】 ■ Energy-saving mechanism and compact design ■ Capable of processing oil-containing sludge ■ Improved maintainability ■ Reduced cleaning water usage ■ Suppression of secondary pollution + maintenance-free *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment

We would like to introduce the "Submersible High-Speed Pump" from Tsurumi Manufacturing, handled by Sankyo Shoji. A new automatic operation model has been introduced for the "LB-800". In addition to being compact and lightweight, it can connect to a 3-inch (80mm) hose. 【Features】 ■ For general construction drainage ■ Compact and lightweight ■ Electrode-type automatic operation specification (Model LB-800A) ■ Three-phase 200V specification (Model LBT-800) ■ 3-inch hose connection available *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Submersible Non-Clog Pump Type B" from Tsurumi Manufacturing, handled by Sanko Shoji. Compared to the current model, it achieves significant improvements in foreign matter passage diameter. With an optimal design, it enhances high efficiency and contributes to energy savings through the pump's increased efficiency. It can be used for wastewater treatment and sewage treatment plants, as well as for wastewater discharge in various factories. 【Features】 ■ High passage performance ■ Increased efficiency ■ Large flow rate ■ Discharge diameters: 200, 250, 300, 350 mm ■ Output: 22 to 75 kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Submersible Pump" from Tsurumi Manufacturing, handled by Sanko Shoji. Based on extensive achievements in high-temperature water drainage, we propose suitable products. With a rich lineup including the "Type B" equipped with a non-clog impeller and the "Type U" with excellent foreign matter passage diameter, we cater to various sites. 【Product Lineup】 ■ For sewage ■ For wastewater ■ For general drainage ■ For clean water ■ For corrosion resistance ■ For construction drainage ■ For sand *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

We would like to introduce the "high-pressure washer" from Tsurumi Manufacturing, handled by Sankyo Shoji. It is highly effective not only at construction sites but also as factory equipment. We offer a wide variety of convenient options, including a basic type that pursues functionality and operability, as well as automatic and hot water types. 【Lineup】 ■ Motor-driven (for underground construction and indoor use) - Basic type - Automatic type - Tank-equipped type - Hot water type *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

At Sanko Shoji, we conduct chimney diagnosis, repair on-site construction, and maintenance. In response to the needs of plant facilities and as part of our commitment to protecting the global environment, the introduction of energy-saving and eco-friendly measures is essential. We are continuously expanding our field of activities. 【Handling Manufacturer】 ■ Tsukasa Tech Co., Ltd. 【Business Activities of the Company】 ■ Comprehensive design ■ Construction execution ■ Inspection, investigation, and diagnosis *For more details, please refer to the PDF document or feel free to contact us.

• Other services

We would like to introduce the "Knocker" manufactured by Exen Corporation, handled by Sanko Shoji. The "Relay Knocker" is a device that uses compressed air to forcefully strike the base surface or the walls of a hopper, removing the adhesion and blockage of powder and granular materials due to the impact. It can be used with just the supply of air, making it excellent in terms of safety and cost-effectiveness. It can also be used safely and without issues on powder and granular materials that tend to stick due to centrifugal vibration. 【Features】 ■ Easily adjustable impact force by simply adjusting the input air supply pressure ■ Functions as a relay piping system, allowing multiple units to operate with a single valve ■ Made from high-strength ductile cast iron ■ Easy maintenance due to its simple structure ■ Simple operating principle and easy remote control *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

We would like to introduce the 'pumps' manufactured by Wilo, which are handled by Sanko Shoji. We offer a lineup including the "Helix Series," suitable for building water supply and pressurization, as well as industrial circulation systems, and the "Wilo HiBoost Series." 【Features】 <Helix V-V series> ■ Energy saving ■ High-efficiency pump with inverter attachment ■ Safe and hygienic corrosion-resistant pump ■ Support for linked control ■ Various protective functions *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "WYPD" is a powder dissolution device that achieves complete dissolution through its unique initial dissolution method. It enables stable supply by adopting a condensation prevention chute. We offer a standard specification "N type" and a high-function specification "P type." 【Features】 ■N type - Equipped with a water supply system using a constant flow valve and a feeder for precise dissolution function. - Achieves a lower price by limiting functionalities. ■P type - Monitors water supply volume and enables powder input proportional to the water supply flow (proportional powder feeding control). - Easy operation with a touch panel, allowing monitoring of actual dissolution amounts. *For more details, please refer to the PDF document or feel free to contact us.

• Other powder equipment

The "Micro Discharger" is a compact supply device that applies the principle of a circle feeder to a continuous box-type supply mechanism, allowing for high-precision micro-dosing of powders with poor flowability. It is less affected by powder pressure and achieves continuous micro-dosing without pulsation. The scraper can be replaced to enable a wide range of supply options. 【Features】 ■ Achieves continuous micro-dosing without pulsation ■ Less affected by powder pressure ■ Accurately supplies even powders with poor flowability ■ Wide supply range with scraper replacement ■ Easy to disassemble and clean *For more details, please refer to the PDF document or feel free to contact us.

• Powder Supply Device
• Transport and handling robots

The "Mini Feeder" is a small quantitative feeder for powder and granular materials with a simple structure that allows for easy disassembly and cleaning. It enables the precise supply of small amounts of powders and granules with poor flowability. It is ultra-compact with a simple structure, and can be disassembled and cleaned with one touch. The capacity can be easily adjusted with a small variable-speed motor. 【Features】 ■ Can discharge powders and granules with poor flowability ■ Ultra-compact with a simple structure ■ Micro-dosing feeder ■ High-precision quantitative supply (approx. 1%) ■ Easy capacity adjustment with a small variable-speed motor ■ Can be disassembled and cleaned with one touch *For more details, please refer to the PDF document or feel free to contact us.

• Powder Supply Device
• Transport and handling robots

The "Circle Feeder (Sanitary Type)" is a compact powder and granular supply device that not only provides a stable supply of discharge materials, but also allows for complete cleaning with simple operation. This product can be used in industries such as chemicals, food, and pharmaceuticals, where sanitary conditions are required, to manufacture high-quality products. 【Features】 ■ Stable supply of difficult-to-discharge materials ■ Easy disassembly and assembly ■ No gaskets ■ Mass flow for precise supply ■ Prevention of bridging and segregation *For more details, please refer to the PDF document or feel free to contact us.

• Powder Supply Device
• Transport and handling robots

The "Disk Feeder" is a powder and bulk material feeding machine that utilizes the technology of the circle feeder, which has a proven track record in supplying difficult-to-discharge materials, while achieving a high feeding accuracy without pulsation. It prevents the crushing of raw materials and pulsation when the remaining amount is low. In addition to accommodating large capacities and diameters, it enables stable supply of irregularly shaped materials. 【Features】 ■ No pulsation ■ Minimal crushing of remaining materials ■ Stable supply of irregularly shaped materials ■ Low power consumption ■ Possible sealed structure ■ Accommodates large capacities and diameters *For more details, please refer to the PDF document or feel free to contact us.

• Powder Supply Device
• Transport and handling robots

The "Loop Feeder" is a powder and granular supply device that can safely handle fibrous and easily entangled materials, such as industrial waste, which are considered relatively difficult to manage with circle feeders. It is suitable for amorphous and hard-to-discharge materials. Materials such as tire scraps, wood chips, and PVC film pieces can be discharged. 【Features】 ■ Stable supply of amorphous materials such as industrial waste ■ Prevention of bridging and segregation ■ Quantitative supply through mass flow *For more details, please refer to the PDF document or feel free to contact us.

• Powder Supply Device
• Transport and handling robots

"CF Sigma" is a powder and bulk material feeder that enables high-precision continuous supply at low cost due to its excellent quantification capabilities. Its unique mechanism achieves high dosing accuracy. In addition to being easy to maintain and clean, it allows for high-precision supply to multiple lines with different materials. Depending on the properties of the powder, you can choose between blade type and disk type. 【Features】 ■ Achieves high supply accuracy with a unique mechanism ■ Fills volumetric feeders with a circle feeder that has a high bridge prevention effect ■ Enables high-precision supply to multiple lines with different materials ■ Prevents supply fluctuations during replenishment ■ Allows selection between blade type and disk type based on powder properties *For more details, please refer to the PDF document or feel free to contact us.

• Powder Supply Device
• Transport and handling robots