三興商事 List of Products and Services

The "HNP type" is a single-screw pump manufactured by Daiko Machinery Industry, handled by Sanko Shoji. It is the basic model of the mono pump and can be used for a wide range of applications. The shaft seal uses a gland packing, and the flexible joint employs a pin method for easy maintenance. The "Taiko Mono Pump" is a product that Daiko Machinery successfully developed by analyzing the point at which the discharge amount per weight reaches its maximum value. In addition to the "HNP type," we offer a lineup of mono pumps capable of powerful liquid transfer, including the "HNP-CS type," suitable for harsh operating conditions, and the submersible "HNV type." [Features] ■ Basic model of the mono pump ■ Drive method is flexible ■ Portable and very convenient ■ Sludge compatible ■ Can pump low-viscosity liquids at high pressure *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Special Pump

The "MSH Series" is a general-purpose electric horizontal low-pressure three-axis screw pump manufactured by Daiko Machinery Industry Co., Ltd., handled by Sanko Shoji. It consists of one main screw and two subordinate screws driven by hydraulic power, forming a three-axis screw configuration. Due to its external bearing type and grease lubrication method, it can also be used with low-viscosity liquids. Additionally, the "MSH-A" features an oil quenching method for the shaft sealing box, while the "MSH" does not include quenching components. 【Features】 ■ Operating oil temperature up to 150℃ ■ Composed of one main screw and two subordinate screws driven by hydraulic power ■ External bearing type with grease lubrication, suitable for low-viscosity liquids ■ Shaft seal: Mechanical seal type is standard ■ Flange: Suction JIS10K, discharge JIS10K *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "NHG Series" is a general electric horizontal low-pressure gear pump with internal bearing, manufactured by Daiko Machinery Industry Co., Ltd. and handled by Sanko Shoji. The gear profile features the "eccentric gear," a one-point continuous contact gear that was conceived ahead of the world. It uses an internal bearing and a self-lubricating method through the liquid being pumped, making it suitable for liquids with lubricating properties. The discharge volume is measured at a discharge pressure of 0.60 MPa and a viscosity of 25.8 mm²/s. The allowable suction pressure range at the pump inlet is -0.05 to 0.20 MPa. 【Features】 ■ The gear profile features the "eccentric gear" as standard. ■ The maximum operating oil temperature is 80°C. ■ It has an internal bearing and a self-lubricating method through the liquid being pumped. ■ Suitable for liquids with lubricating properties. ■ Shaft seal: gland packing type is standard. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "NHGH Series" is a general-purpose electric horizontal medium-pressure gear pump manufactured by Daiko Machinery Industry Co., Ltd., handled by Sanko Shoji. The gear shape features the "eccentric gear," a point continuous contact gear that was conceived ahead of the world. It is designed with internal bearings and utilizes a self-lubricating method through the liquid being pumped, making it suitable for liquids with lubricating properties. The discharge volume is measured at a discharge pressure of 1.6 MPa and a viscosity of 25.8 mm²/s. The allowable suction pressure range at the pump inlet is -0.05 to 0.20 MPa. 【Features】 ■ The gear shape is the standard "eccentric gear" with point continuous contact. ■ The maximum operating oil temperature is 80°C. ■ It has internal bearings and a self-lubricating method through the liquid being pumped. ■ Suitable for liquids with lubricating properties. ■ Shaft sealing: mechanical seal type and gland packing type are available. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "R Series" is a two-shaft rotary blower of the Roots type that employs a "special profile impeller" developed by consolidating years of research and technology. It is a blower with high practical value that demonstrates excellent performance in volumetric efficiency and overall isentropic efficiency. With a rich variety of models, it satisfies a wide range of customer specifications, from small to large capacities, low to high pressures, and from air to special gases. Additionally, we offer a lineup that includes the two-stage gas pressure blower "TR Series," the two-stage gas suction wet blower "TR-W Series," and the "R-NZ Series," among others. 【Features】 ■ High efficiency in volumetric efficiency (energy-saving effect) ■ Rich variety of models ■ Oil-free ■ Simple structure ■ Low noise and low vibration *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "TBS Series" is an energy-saving rotary blower (Roots type) for air manufactured by Daiko Machinery Industry, handled by Sanko Shoji. It features a gap design that enhances volumetric efficiency, a specially shaped impeller that allows for a greater airflow per revolution, optimized rotational speed design, and the use of energy-saving V-belts, resulting in a highly energy-efficient product. Additionally, it achieves over 120% maximum airflow compared to the same diameter "SSR Series," and depending on the specifications, it can be accommodated with a smaller model than conventional ones. The height of the intake silencer has also been reduced, and the entire unit is designed to be compact. 【Features】 ■ Thorough pursuit of energy efficiency ■ Over 30% maximum and over 10% average energy savings (compared to SSR Series) ■ Compact design ■ Low noise and low vibration design ■ Consideration for body replacement and maintenance *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Vacuum pump

The "TSS/TSA/SSR Series" is a rotary blower of the three-lobe helical roots type manufactured by Daiko Machinery Industry Co., Ltd., handled by Sanko Shoji. The TS type three-lobe helical roots rotary blower is a groundbreaking volumetric rotary blower that has successfully developed a helical structure from a completely new perspective, thanks to innovative technological sensibilities and exceptional process capabilities. Additionally, the SSR type three-lobe helical roots rotary blower is a new product developed by incorporating new technologies based on years of experience in manufacturing and selling roots type rotary blowers. 【Features】 - Provides clean air without oil contamination - Excellent durability, capable of withstanding long hours of continuous operation - Lightweight and compact, requiring minimal installation space - Easy installation - Low noise due to helical port structure *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "MST Series" is a general-purpose electric vertical low-pressure three-axis screw pump manufactured by Daiko Machinery Industry Co., Ltd., handled by Sanko Shoji. It consists of one main screw and two subordinate screws driven by hydraulic power, forming a three-axis screw configuration. With an internal bearing structure and a self-lubricating method through the pumped liquid, it is suitable for liquids with lubricating properties. Additionally, we offer the "MST-H Series," a crosshead lubricating oil pump specifically for diesel engines, and the "MSTE Series," a three-axis screw pump for low viscosity. 【Features】 ■ Operating oil temperature up to 80℃ ■ Composed of one main screw and two subordinate screws driven by hydraulic power ■ Internal bearing structure with a self-lubricating method through the pumped liquid ■ Suitable for liquids with lubricating properties ■ Shaft seal: Mechanical seal type is standard ■ Flange: Suction JIS 5K, discharge JIS 10K *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps