ビュルケルトジャパン List of Products and Services

Burkert's LFC (Liquid Flow Controller) measures and controls liquid flow rates from 15 to 600 ml/min. Compared to liquid mass flow controllers available on the market, it allows for the control of larger flow rates.

The Burkert paddle flow meter is a product that combines a signal output section (transmitter) and a piping section (fitting). This offers a benefit to customers, as it allows for the replacement of only the signal output section in the event of a failure, such as from a lightning strike, thereby reducing costs. However, since this may be somewhat difficult to understand, we will provide an explanation in this document.

This is a paddle wheel flow meter made of POM (or ECTFE) material. It is ideal for corrosive fluids and low flow measurements. ○ Accuracy: Approximately 2% (FS) ○ Fluid pressure: Up to 1.0 MPa ○ Fluid temperature: 0 to 80℃

The Type8045 electromagnetic flow meter (insert type) can be used in conjunction with the TypeS020 fitting for pipe diameters ranging from DN06 to DN400. The main unit is equipped with a screen and buttons. The screen can display instantaneous flow and cumulative flow. Additionally, settings for 4-20mA signals, relay signals, pulse width, and more can be configured using the screen and buttons. 【Features】 ○ Flow measurement principle with no moving parts ○ Capable of displaying both instantaneous flow and cumulative flow ○ Even if no actual flow is present, it can output a corresponding virtual signal (useful during trial runs, etc.) ○ Ideal for CIP flow measurement, FDA certified ○ Alloy C22 electrodes are also available in the lineup For more details, please refer to the catalog or feel free to contact us. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Please note that our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

Introducing an easily implementable electromagnetic flow meter. By adopting the insertion type, which our company specializes in, it can be easily introduced even with large pipe diameters by simply attaching dedicated fittings to the piping! Being a lightweight product, it also eliminates the need for support installation. By utilizing the built-in automatic alignment function (Teach-In function), it achieves an accuracy of approximately 0.5% (reading value) despite being an insertion type! ● Flow measurement principle with no moving parts (electromagnetic flow meter) ● Capable of displaying both instantaneous flow and cumulative flow ● Even when actual flow is not present, it can output a corresponding virtual signal (useful during trial runs, etc.) ● Ideal for CIP flow measurement ● Alloy C22 electrodes are also available (for highly corrosive fluids such as seawater) ● Fitting materials: SUS, PVC ● Connection types: Rc thread, hose, flange, TS socket, welding tab

This is a flow meter that uses ultrasonic technology. It has the characteristic of being less affected even when foreign substances are mixed in the fluid. Additionally, it features a very wide measurement range and low pressure loss. <Measurement Flow Range> 0.06 ～ 20 [L/min] 0.1 ～ 50 [L/min] 0.16 ～ 82 [L/min] 0.6　～ 116 [L/min] 1.0 ～ 200 [L/min]

Burkert's batch controller is a product that can be easily automated with just a flow meter and a valve, without the need for special electrical knowledge. Batch control (quantitative control) is a control method where a specific batch amount (quantity) is set, for example, "100 liters," and that amount is dispensed. For example: - I want to add "500L" of water to cement. - In bread production, I want to add "30L" of water to the flour. - To dilute alcohol by a factor of ten, first, put "10L" of alcohol in one tank, and then add "90L" of water in another tank. These are some of the applications you can use it for.

Burkert's liquid flow controller can accommodate requests such as, "I want to achieve a higher flow rate in the next model" and "I need a flow controller that can handle corrosive fluids other than water." It is a unique liquid flow controller developed based on the experience gained from applications involving hydrogen peroxide. **Features of Burkert's Liquid Flow Controller:** - High flow rate: Capable of controlling up to 600 ml/min (equivalent to water) with a single unit - Fluid specifications: Compatible with corrosive fluids such as ammonia, methanol, and hydrogen peroxide - Pressure specifications: Supports up to 0.6 MPa - Response speed: Up to 500 msec - Tight shut-off capability: Reduces costs and space for separate solenoid valves - No need for separate installation of check valves: Internal adjustment valve includes check function **Digital Communication Compatibility:** Supports various communications such as EtherNet/IP, EtherCAT, Modbus/TCP, and PROFINET. *For more details, please contact us or view the PDF download.*

The Bürkert Type 8050 is a compact electromagnetic flow meter that can measure flow rate, temperature, and conductivity all in one unit. With IO-Link compatibility, data visualization and system integration are made easy. Wireless short-range configuration is also possible, significantly reducing the effort required for installation and adjustment. Its robust design, which has no moving parts, ensures a long lifespan and accommodates a wide range of processes, from cleaning and cooling lines in various industries to water consumption management in energy management. Three measurements in one device: flow rate, temperature, and conductivity. Digital connection: IO-Link compatible, wireless adjustment function. High reliability: IP65/IP67, pressure-resistant design up to 16 bar. Reduced wiring and maintenance lead to cost savings and increased efficiency.