セントラルフィルター工業 Product Lineup

This is a spool-shaped depth-type filter element. It features a density gradient designed to capture coarse particles on the surface side and fine particles in the center, achieving a long lifespan. Additionally, due to its abundant filtration material and core material, it can accommodate a wide range of applications for both liquids and gases.

For gas filter elements and coarse dust air filters (UP type), contact "Central Filter Industry Co., Ltd."

For information about the filter case TPH-1A-20N, contact "Central Filter Industry Co., Ltd."

For information about the filter case TPP-1A-20N, contact "Central Filter Industry Co., Ltd."

The "Dust Air Filter (UP Type)" is a filter used as a flat-type coarse dust filter element. The filter material of this product typically uses flame-retardant non-woven fabric, and the operating temperature range is -40 to 80°C. Additionally, it can be washed several times and easily regenerated. 【Features】 ■ Easily regenerable ■ Washable several times ■ Uses flame-retardant non-woven fabric as the filter material ■ Ideal as a flat-type coarse dust filter element *For more details, please refer to the catalog or feel free to contact us.

The "TPH-1A-20N" is a filter housing that allows for external confirmation of the dirtiness of the filter element. It is a lightweight, compact, and inexpensive product that makes it easy to replace the filter element. Additionally, we also offer the TPP-1A-20N, which has excellent chemical resistance, so please feel free to contact us. 【Features】 ■ Lightweight ■ Compact ■ Inexpensive ■ Allows external confirmation of dirtiness ■ Easy filter element replacement *For more details, please refer to the catalog or feel free to contact us.

"Juraclean" is a wound-type cartridge filter used in various fields, including liquid and gas filtration and purification. Due to its effective density gradient, it has a good filtration lifespan and excellent performance in filtration efficiency, dust capture, and filtration flow rate. The filter media contains no spinning oil or any other impurities, making it a clean product made from carefully selected fibers. [Features] - Clean - Good filtration lifespan - Excellent filtration efficiency - Effective density gradient - Ideal for liquid and gas filtration *For more details, please refer to the catalog or feel free to contact us.

The "HEPA Filter (UHP, UHPC Type)" is an air filter with a wide variety of options, classified as HEPA grade. It is used in combination with pre-filters and medium-efficiency filters. The standard material is made of an aluminum outer frame. There are standard UHP types and high airflow UHPC types available. Custom sizes outside of the standard specifications can also be manufactured. Additionally, we offer a heat-resistant type of HEPA filter (UHPT, UHPCT) that is suitable for high-temperature applications. 【Features】 ■ HEPA grade filter ■ Wide variety of options ■ Standard material is made of aluminum outer frame ■ Custom sizes outside of standard specifications can also be manufactured *For more details, please refer to the PDF document or feel free to contact us.

The "Geraflow (DFS type)" is a pleated type cartridge filter designed for high flow and low pressure loss. It is made by welding SUS316 pleated mesh with SUS304 plates, making the filter media robust and suitable for high-viscosity fluids. Due to its stainless steel construction, it can be used at high temperatures and is washable for reuse. 【Features】 ■ Metal pleated type ■ Robust filter media ■ Suitable for high-viscosity fluids ■ Usable at high temperatures ■ Washable and reusable *For more details, please refer to the PDF document or feel free to contact us.

The "Juramenburen PTFE TYPE" is a liquid filter element that is optimal for sterilizing filtration of vent air, pressurized air, and filling gases. Additionally, it can be used for the removal of fine particles from various acids, alkalis, and chemical substances, as well as for the removal of fine particles from various gases. *For more details, please refer to the PDF document or feel free to contact us.*

The "Metal Fiber Filter" is a cartridge filter that uses stainless steel metal fiber non-woven fabric as the media. It is ideal for filtering high-temperature and high-viscosity fluids such as polymers. Additionally, its excellent cleanability allows for repeated use. 【Features】 ■ High space rate ■ Excellent pressure resistance ■ Excellent heat resistance ■ Excellent chemical resistance (corrosion resistance) ■ Excellent cleanability ■ Compatible with various mounting shapes (flat gaskets, O-rings, threaded connections, etc.) *For more details, please refer to the PDF document or feel free to contact us.

The "Radial Pleated Filter (AR Type)" is a filter element used for the filtration of air and various gases as an industrial dust filter in a round pleated type. Due to its pleated design, it has a large filtration area, resulting in low pressure loss. Additionally, it uses polyester non-woven fabric, making it a product with high collection efficiency. 【Features】 ■ Round pleated type industrial dust filter ■ Large filtration area ■ Low pressure loss ■ High collection efficiency *For more details, please refer to the PDF document or feel free to contact us.

The "DCII" is a cartridge filter with a two-layer structure of non-woven fabric and molded layers, ensuring a long lifespan. It is suitable for filtering electronic component plating solutions, etching solutions, chemical solutions, and cleaning water, as well as for applications such as paint, ink, and magnetic agent purification. The fibers are thermally bonded, preventing any loss of filtering material. Additionally, all products undergo a cleaning process, ensuring there are no elutions. 【Features】 ■ Two-layer structure of non-woven fabric and molded layers ensures a long lifespan ■ Thermally bonded fibers prevent loss of filtering material ■ All products are cleaned, ensuring no elutions ■ Made only from polyolefin materials, offering excellent chemical resistance ■ All raw materials comply with FDA standards *For more details, please download the PDF or feel free to contact us.

The "DCII-V" is a cartridge filter with a two-layer structure consisting of a non-woven fabric layer and a molded layer, ensuring a long lifespan. The non-woven fabric layer is reinforced with a strong mesh, providing strength to handle high-viscosity liquids. It is suitable for filtering high-viscosity liquids such as paints, magnetic materials, printing inks, as well as for filtering oils, resins, solvents, catalysts, and other applications in the chemical industry. 【Features】 ■ Two-layer structure of non-woven fabric layer and molded layer ensures long lifespan ■ Non-woven fabric layer is reinforced with a strong mesh, capable of handling high-viscosity liquids ■ Fibers are thermally fused together, preventing media shedding ■ All products are cleaned and free from leaching ■ Only polyolefin-based materials are used, offering excellent chemical resistance ■ All raw materials comply with FDA standards *For more details, please download the PDF or feel free to contact us.

The "DCII-Y" is a cartridge filter composed of three layers: a non-woven fabric layer, a semi-absolute layer, and a molded layer. The central semi-absolute layer achieves a removal rate of 99% accuracy at high flow rates from the initial stage. The fibers are thermally bonded, preventing any shedding of the filter media. Additionally, all products are thoroughly cleaned, ensuring no leaching or similar issues. 【Features】 ■ Composed of three layers: non-woven fabric layer, semi-absolute layer, and molded layer ■ The central semi-absolute layer achieves a removal rate of 99% accuracy at high flow rates from the initial stage ■ Fibers are thermally bonded, preventing shedding of the filter media ■ All products are thoroughly cleaned, ensuring no leaching or similar issues ■ Made exclusively from polyolefin-based materials, offering excellent chemical resistance ■ All raw materials comply with FDA standards *For more details, please download the PDF or feel free to contact us.

"Juracore" is a new type of fiber activated carbon cartridge filter developed jointly by Osaka Gas Chemical Co., Ltd. and our company. Conventional fiber activated carbon has struggled to achieve performance that overcomes its high cost, and has only been used in limited applications until now. Therefore, we developed this product using pitch-based fiber activated carbon made from a special pitch with a high activation yield as the raw material, achieving high cost performance. [Features] - Excellent adsorption speed - Large adsorption capacity - No leaching of activated carbon - Superior ease of replacement *For more details, please download the PDF or feel free to contact us.

The "Jura Flow (DFE type)" is a high-performance cartridge filter of the pleated type. Being a pleated type, it offers high flow rates with low pressure loss. Since it does not use binders, it has minimal leachables and is clean. The filtration precision is 0.3 to 10 μm, heat resistance is up to 70°C, and the filtration area is 0.45 m² (for the 250 mm model). 【Features】 ■ High flow rates with low pressure loss due to the pleated design ■ High porosity and long lifespan ■ Hydrophilic, resulting in low pressure loss with aqueous solutions ■ Minimal leachables and clean due to the absence of binders *For more details, please download the PDF or feel free to contact us.

The "Jura Flow (DFP type)" is a high-performance cartridge filter of the pleated type. Being pleated allows for high flow rates with low pressure loss. Since it does not use a binder, it has minimal leachables and is clean. The materials for the main media, protector, core, and end plate are all polypropylene. 【Features】 ■ High flow rates with low pressure loss due to the pleated design ■ High void ratio and long lifespan ■ Made entirely of polypropylene, offering excellent chemical resistance ■ Minimal leachables and clean due to the absence of binders *For more details, please download the PDF or feel free to contact us.

We would like to introduce our cartridge filter, "Jura Membrane PES TYPE." It is used for applications such as sterilizing filtration of water for food use, pure water for cleaning liquid crystal displays and semiconductor devices, pure water for manufacturing in the liquid crystal display and semiconductor-related industries, and pure water for manufacturing electronic tubes and related components. The filtration precision (absolute filtration) is 0.1, 0.2, 0.45, 0.65, 0.8, and 1.2 μm. 【Dimensions】 ■ Total length: 125/250/500/750/1000 mm ■ Inner diameter: 30 mm ■ Outer diameter: 68 mm ■ Filtration area: 0.63 m² (250 mm) *For more details, please download the PDF or feel free to contact us.

We would like to introduce our cartridge filter, the 'Sintered Metal Mesh (PM) for Liquids'. It fully demonstrates the excellent filtration precision of the metal mesh. It has good permeability and low pressure drop. It possesses the unique strength and toughness of stainless steel, and additionally, it has excellent pressure resistance due to sintering. It also has heat resistance characteristics of stainless steel, allowing it to be used in an oxidizing atmosphere at temperatures ranging from -269°C to 600°C. 【Features】 ■ Fully demonstrates the excellent filtration precision of the metal mesh ■ Good permeability and low pressure drop ■ Possesses the unique strength and toughness of stainless steel, with excellent pressure resistance due to sintering ■ Has heat resistance characteristics of stainless steel, usable in an oxidizing atmosphere from -269°C to 600°C ■ Unique corrosion resistance of stainless steel ■ High regeneration effect through backwashing, allowing for long-term use *For more details, please download the PDF or feel free to contact us.

The "Gas Use Juraflow (DFP Type)" is a high-performance cartridge filter of the pleated type. Made entirely of polypropylene, it has excellent chemical resistance, and since it does not use any binders, it has minimal leachables and is clean. There is no increase in differential pressure due to condensed water even with moist gases. It is suitable for applications such as sterilization and dust filtration of gases like air and nitrogen. 【Features】 ■ Pleated type for high flow rate and low pressure loss ■ High porosity for a long lifespan ■ Made entirely of polypropylene with excellent chemical resistance ■ Minimal leachables and clean due to the absence of binders ■ No increase in differential pressure due to condensed water even with moist gases *For more details, please download the PDF or feel free to contact us.

We would like to introduce our cartridge filter, the "Sintered Metal Mesh for Gases (PM)." It fully demonstrates the excellent filtration precision of the metal mesh. It has good permeability and low pressure drop. It possesses the unique strength and toughness of stainless steel, and additionally, it has excellent pressure resistance due to sintering. Furthermore, it has heat resistance characteristics of stainless steel, allowing it to be used in an oxidizing atmosphere at temperatures ranging from -269°C to 600°C. 【Features】 ■ Fully demonstrates the excellent filtration precision of the metal mesh ■ Good permeability and low pressure drop ■ Possesses the unique strength and toughness of stainless steel, with excellent pressure resistance due to sintering ■ Has heat resistance characteristics of stainless steel, usable in an oxidizing atmosphere at -269°C to 600°C ■ Unique corrosion resistance of stainless steel ■ High regeneration effect through backwashing, allowing for long-term use *For more details, please download the PDF or feel free to contact us.

The "Coarse Dust Air Filter (UP Type)" is a flat-type filter element designed for particles ranging from 3 to 30 μm. The filter media typically uses flame-retardant non-woven fabric. It can be washed several times and easily regenerated. It is widely used as a pre-filter for various air conditioning systems and as a standalone filter. 【Lineup (partial)】 ■ UP-305 ■ UP-350 ■ UP-400 ■ UP-450 ■ UP-500 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Heat-resistant HEPA Filters (UHPT type/UHPCT type)." These filters have a wide variety of HEPA-grade heat-resistant applications and can be used in combination with pre-filters and medium-efficiency filters. We offer the standard UHPT type and the high air volume UHPCT type. We can also manufacture special sizes that are not standard. 【UHPT Type Standard Specifications】 ■ Collection Efficiency: 99.97% at 0.3μm ■ Initial Pressure Drop: 245Pa ■ Final Pressure Drop: 490Pa ■ Operating Temperature: Below 150℃ (continuous) *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Medium to High Performance Air Filter <Thin Mini Pleat Type>." The filter media is made of non-woven fabric that is pleated, with hot melt applied in a columnar form between the pleats. This structure prevents the pleats from sticking together due to air pressure, maintaining low pressure loss and high lifespan performance. There are three standard thicknesses: 30mm, 50mm, and 65mm, and the external dimensions can be customized to your specifications. 【Materials】 ■ Material: Polyester ■ Frame: Aluminum ■ Sealant: Epoxy resin ■ Gasket: Neoprene sponge *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Medium Efficiency Air Filter (UC Type)" that we handle. Due to its large filtration area, it has low pressure loss, high collection efficiency, and a long lifespan, making it economical. As a rectangular pleated type industrial dust filter, it is used in a wide range of applications. 【Materials (partial)】 ■ Filter media: Polyester ■ Frame: SUS304 ■ Sealant - Standard: Epoxy resin - Option: Silicone resin *For more details, please download the PDF or feel free to contact us.