フカガワ List of Products and Services

Realizing all the desired features, performance, and usability. The best plasma cutting machine imaginable for the industry and the field.

It is a forming machine compatible with galvanized iron plates, stainless steel, and PVC.

With the power assist feature, you can easily work with one hand.

This catalog is a comprehensive catalog of Fukagawa Co., Ltd., which manufactures and sells machinery, equipment, and components for duct production. It includes machinery such as "coil unpacking tables" and "flanging machines," as well as duct products like "rectangular ducts," "flanges," and "spiral ducts." In addition, we offer a wide range of products including hoods and filters. [Contents (excerpt)] ■ Dampers ■ Outlets and inlets ■ Duct components ■ Tools ■ Home ducts * For more details, please refer to the PDF document or feel free to contact us. * This PDF document is a digest version. If you need the full version, please contact us.

Fukagawa Co., Ltd. manufactures and sells machinery, equipment, and components for duct production. This document provides an overview of our products. [Featured Products (Excerpt)] ■ Hanger Angle ■ Square Duct ■ Easy Canvas ■ TFD Reinforced Flange ■ Pankar Louver *For more details, please refer to the PDF document or feel free to contact us.

The "Laser Dual" is a fiber laser cutting machine that offers more than double the cutting speed compared to our plasma cutting machines. It does not require warm-up operation or assist gas, significantly reducing running costs. Additionally, there is no dirt accumulation on the back side of the cut parts, eliminating the need for wiping. Furthermore, the two-axis drive greatly improves cutting accuracy. 【Features】 ■ Minimal slag during the production of thick plate ducts, eliminating the need for sanding ■ Fewer optical components, reducing the need for frequent maintenance ■ Significantly improved cutting accuracy due to the two-axis drive ■ Clean cutting surfaces ■ Coil materials can be used *For more details, please refer to the PDF document or feel free to contact us.

The "Bright Dual" is a plasma cutting machine that has achieved paperless operation through the adoption of new control software. You can check the cutting data without printing the work instructions. Furthermore, due to the built-in control panel, it can be installed in approximately 25% less space compared to our conventional machines. 【Features】 ■ Space-saving with improved accuracy ■ Achieves paperless operation ■ New notification function ■ On-site filtering function *For more details, please refer to the PDF materials or feel free to contact us.

Our company offers the estimation creation software "Rakuraku-san II." Estimates can also be created from Plasma Data (Software: Ver.6) and P-MAX Data. You can create two types of estimates: construction estimates and production estimates. 【Features】 ■ Easy aggregation of input site data ■ Estimates can be created from Plasma Data and P-MAX Data ■ Two types of estimates: construction estimates and production estimates *For more details, please refer to the PDF materials or feel free to contact us.

We offer the duct input expansion software 'FPC'. The screen rendering changes simultaneously based on the input size. By being able to confirm the shape in real-time, we achieve a reduction in input errors and manufacturing mistakes. Additionally, it allows for the movement of individual sheets between multiple sheets, as well as thickness jumps (placing 0.6t in 0.8t), thereby thoroughly reducing unnecessary material usage. 【Features】 ■ Comprehensive, easy, and user-friendly input functions ■ Significantly improved expansion accuracy ■ Automatically provides various report outputs ■ Multiple sheet displays and movements between sheets are possible *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce our button punch snap lock 'FSL-20NHS (31ad)'. The forming speed for zinc steel plates is 28m/min. It automatically slows down when the motor is overloaded. The standard model has a three-speed switching system, but a variable speed (volume) option is also available. Additionally, we offer a lineup including the zinc-specific machine 'FSL-20SS', the 'FSL-18' capable of forming 1.2mm, and the 'Easy Hand Puncher'. 【Features】 ■ Forming speed for zinc steel plates: 28m/min ■ Automatic slowdown when the motor is overloaded ■ Capable of forming zinc copper plates, stainless steel plates, and PVC steel plates ■ Capable of forming thick plates without wobbling ■ Reduces forming defects due to feeding errors *For more details, please refer to the PDF document or feel free to contact us.

We handle the Mitsui Haze (Pittsburgh) 'FS-18M/FS-18S'. The "FS-18M" is a compact and lightweight standard model. The "FS-18S" has a zinc steel plate forming speed of 15m/min. If you need to process materials other than zinc steel plates, stainless steel plates, PVC steel plates, and Galvalume sheets for duct production, please be sure to consult us in advance. 【Features】 ■ FS-18M - Compact and lightweight standard model ■ FS-18S - Zinc steel plate forming speed of 15m/min - Capable of forming zinc steel plates, stainless steel plates, and PVC steel plates *For more details, please refer to the PDF document or feel free to contact us.

Fukagawa Co., Ltd. manufactures and sells machinery, tools, and components for duct manufacturing. We handle the edge folding machine 'FR-3P-20' that enables stable molding. 【Features】 ■ Button bunch compatible machine ■ Capable of stable molding ■ Processing plate thickness: #20 to #26 (1.0mm to 0.5mm) ■ Sizes: 700, 500, 950 *For more details, please refer to the PDF document or feel free to contact us.

We handle the "Ultra High-Speed TED Molding Machine (SSI Series - TED)." The molding speed for zinc-coated steel sheets has dramatically improved. It is capable of molding zinc-coated steel sheets, stainless steel sheets, and PVC-coated steel sheets. In the SSI series, we offer a standard model specialized for flange molding, the "TFD-203SSI," along with models such as "TFD16" and "TFD-181SSI." 【Features】 - Equipped with a 3-stage switch that allows for speed adjustment based on the material. - Includes an automatic feeding device for continuous molding. - Dramatically improved molding speed for zinc-coated steel sheets. - Capable of molding zinc-coated steel sheets, stainless steel sheets, and PVC-coated steel sheets. *For more details, please refer to the PDF document or feel free to contact us.

Fukagawa Co., Ltd. manufactures and sells machinery, tools, and components for duct production. We would like to introduce our three-roll machine for square elbows, the 'FBR-2000M'. It achieves efficiency in the bending process of both inner and outer radii of rectangular ducts. Examples of production include branch elbows and square elbows. 【Product Lineup】 ■FBR-2000 ■FBR-2000M ■FBR-2500M *For more details, please refer to the PDF document or feel free to contact us.

Fukagawa Co., Ltd. manufactures and sells machinery, tools, and components for duct production. We would like to introduce our TFD duct folding machine, the 'FDB-18A'. It can handle common flange ducts, angle flange ducts, button punch seams, and Mitsui seams, as well as general bending. 【Product Lineup】 ■ FDB-18A ■ FDB-18 *For more details, please refer to the PDF document or feel free to contact us.

Fukagawa Co., Ltd. manufactures and sells machinery, tools, and components for duct manufacturing. We handle the edge bending machine 'FR-3PF-20' that can perform bending and punching in one process. 【Features】 ■ One-process type ■ Capable of bending and punching ■ Processing plate thickness: #20 to #26 (1.0mm to 0.5mm) ■ Sizes: 700, 500, 890 *For more details, please refer to the PDF document or feel free to contact us.

The "TBU-16" is an eccentric with a forward/reverse button switch. The blade stroke is 60mm. Due to its screw mechanism, fine adjustments can be made with the handle. Additionally, the bending angle can also be easily adjusted with the handle. 【Features】 ■ Blade stroke: 60mm ■ Screw mechanism ■ Fine adjustments possible with the handle ■ Bending angle can also be easily adjusted with the handle ■ Optional die for common plate flange is also available *For more details, please refer to the PDF document or feel free to contact us.

We handle the manual duct angle cutting machine 'FHN-18FG/FHN-18TFD'. It is lightweight and versatile. The "FHN-18FG" is exclusively for Mitsui Haze/angle flanges. The "FHN-18TFD" is compatible with both Mitsui Haze/button punches. 【Features】 ■ Lightweight and versatile ■ FHN-18FG 　・ Exclusively for Mitsui Haze/angle flanges ■ FHN-18TFD 　・ Compatible with both Mitsui Haze/button punches 　・ Compatible with common plate flanges/angle flanges *For more details, please refer to the PDF document or feel free to contact us.

Fukagawa Co., Ltd. manufactures and sells machinery, tools, and components for duct manufacturing. The air hammer (clamping machine) 'FAH-18U' that we handle is a lightweight model with excellent cost performance. 【Specifications】 ■ Model: FAH-18U ■ Material thickness: #18 to #26 (1.2mm to 0.5mm) ■ Air pressure: 0.6 to 0.7MPa (6 to 7kgf/cm²) ■ Weight (kg): 2.5 ■ Size: 300 *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our duct flange return machine, the 'FDBB-18A'. The duct processing capacity is L3×25 to L3×40. The air pressure is 0.5 to 0.7 MPa (5 to 7 kgf/cm²). Compared to hammers and air hammers, it has a dramatic noise reduction effect. Additionally, it is lightweight, which improves work efficiency. 【Features】 ■ Dramatic noise reduction effect compared to hammers and air hammers ■ Lightweight, improving work efficiency *For more details, please refer to the PDF document or feel free to contact us.

The "NFN-20SP" is a new fastener that serves as a standard model for both insertion and crimping duct crimping machines. It can be modified to a 22SP by replacing the switch lever. It eliminates noise generated during corner insertion and crimping operations. Compared to manual hammering, it significantly reduces the strain on the arms. 【Features】 ■ Standard model for both insertion and crimping ■ Can be modified to a 22SP by replacing the switch lever ■ Eliminates noise generated during corner insertion and crimping operations ■ Significantly reduces strain on the arms compared to manual hammering ■ Handy type *For more details, please refer to the PDF document or feel free to contact us.

The "NFN-18P" is a new fastener specifically designed for duct crimping machines. The air pressure is 0.5 to 0.6 MPa (5 to 6 kgf/cm²). The weight is 1.6 kg. It can process up to 1.2 mm. 【Features】 ■ Dedicated crimping type ■ Capable of processing up to 1.2 mm ■ Handy type *For more details, please refer to the PDF document or feel free to contact us.

The "NFN-22SP" is a new fastener that serves as a duct crimping machine for corner insertion and crimping work. It is a compact and lightweight model with a thickness range of 0.5mm to 0.8mm and weighs 1.5kg. The sizes available are 70mm, 90mm, and 360mm. Please use a pressure reducing valve for air pressures above 0.5 to 0.6MPa (5 to 6kgf/cm²). 【Features】 ■ Compact and lightweight model (0.5mm to 0.8mm) ■ Handy type *For more details, please refer to the PDF materials or feel free to contact us.

The "NFN-18P" is a strong fastener from New Fastener that enables even more powerful and stable crimping operations for duct crimping machines. The width that collapses in one crimping operation is approximately 1.5 times greater compared to the New Fastener. The processing plate thickness ranges from #18 to #26, or 1.2mm to 0.5mm. 【Features】 ■ Enables even more powerful and stable crimping operations than the New Fastener ■ The width that collapses in one crimping operation is approximately 1.5 times greater compared to the New Fastener *For more details, please refer to the PDF materials or feel free to contact us.

The "YHR-5-NS" is a standard model riveter that streamlines the calling of rivets and the riveting process. In the event of a riveting failure, it allows for the smooth cutting and removal of the rivet. Additionally, we offer an optional "Rivet Cutter." 【Features】 ■ A standard model that enhances the efficiency of rivet calling and riveting tasks ■ Allows for the smooth cutting and removal of rivets in case of riveting failure ■ Optional "Rivet Cutter" available *For more details, please refer to the PDF document or feel free to contact us.

The "FLR-1000N" is a standard type of reinforcement riveting machine (air riveter) that performs the calling and setting of rivets for intermediate reinforcement flanges in ducts. No single-phase 100V power supply is required. It operates solely on air. The processing plate thickness is #18, 1.2mm. 【Features】 ■ Standard type for calling and setting rivets for intermediate reinforcement flanges in ducts ■ Operates solely on air (no single-phase 100V required) *For more details, please refer to the PDF document or feel free to contact us.

The "HSP-500" is a spiral duct forming machine that enables high-speed molding through a ring system. The processing diameter ranges from φ100 to φ500. There are 17 types of processing available. Additionally, we can provide separate estimates for forming machines for stainless steel and PVC spiral ducts, so please feel free to consult with us. 【Features】 ■ High-speed molding is possible due to the ring system ■ Separate estimates are available for forming machines for stainless steel and PVC spiral ducts *For more details, please refer to the PDF document or feel free to contact us.

The "SD-1300" is capable of forming spiral ducts with diameters ranging from φ300 to φ1300. It is also possible to form ribbed spiral ducts as an option (with 3 ribs). Additionally, we can provide separate estimates for the forming machines for stainless steel and PVC spiral ducts, as well as ribbed spiral ducts, so please feel free to consult us. 【Features】 ■ Capable of forming spiral ducts with diameters from φ300 to φ1300 ■ Optionally, ribbed spiral ducts can also be formed (with 3 ribs) ■ Separate estimates are available for forming machines for stainless steel and PVC spiral ducts, as well as ribbed spiral ducts *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our powerful stringing machine, the 'HR-1'. The maximum processing plate thickness is 1.2mm, and the processing diameter ranges from φ100 to φ500. It is a versatile machine for shaping the seams, flanges, and strings of round ducts. If you plan to process materials other than zinc-coated copper plates, stainless steel copper plates, PVC copper plates, or Galvalume copper plates for duct manufacturing, please be sure to consult with us in advance. 【Features】 ■ A versatile machine for shaping the seams, flanges, and strings of round ducts. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our powerful string dispensing machine, the 'HR-2A (Air Type)'. The mounted motor is a three-phase 0.75 kW (1 HP), and the weight is 125 kg. The vertical movement of the upper roll is performed using air pressure. If you need to process materials other than galvanized copper plates, stainless copper plates, PVC copper plates, or Galvalume copper plates for duct production, please be sure to consult with us in advance. 【Features】 ■ The vertical movement of the upper roll is performed using air pressure. * For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our powerful string dispensing machine, the 'HR-3L'. It weighs 150 kg and has dimensions of 1330 mm x 465 mm x 1415 mm. It is a dedicated machine for 600L long arms and seam closing. If you need to process materials other than zinc-coated copper plates, stainless steel copper plates, PVC copper plates, or Galvalume copper plates for duct production, please be sure to consult with us in advance. 【Features】 ■ Long arm (600L) ■ Dedicated seam closing machine * For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our spin color molding machine 'HR-SPC'. The processing plate thickness is 0.8mm, and the mounted motor is 100V/0.4kw (1/2HP). When mounting on the duct surface, screws and spot welding are not required. If you plan to process materials other than zinc copper plates, stainless steel copper plates, PVC copper plates, or Galvalume copper plates for duct production, please be sure to consult with us in advance. 【Features】 ■ No screws or spot welding required when mounting on the duct surface. *For more details, please refer to the PDF document or feel free to contact us.

The "HSLL-26" is a compact, lightweight, and efficient thermal insulation racking forming machine. Various combinations are available for racking. It is compatible with color steel sheets and galvanized steel sheets. Double seams are standard. Please specify one from four types for single seams. 【Features】 ■ Compact, lightweight, and efficient ■ Various combinations available for racking ■ Compatible with color steel sheets and galvanized steel sheets ■ Forming shapes - Double seams are standard - Single seams can be specified from four types *For more details, please refer to the PDF materials or feel free to contact us.

Our company, a comprehensive manufacturer of duct materials and a specialized trading company, delivers what is needed when it is needed in a one-stop manner to duct specialty contractors, equipment construction contractors, and specialized equipment trading companies nationwide. This catalog features items such as "duct manufacturing machines," "ducts," "dampers," and "hoods and filters." Additionally, we also introduce our online e-commerce site, DX service business software, and business support services. [Contents (partial)] ■INDEX ■Machines ■DX Services ■Ducts ■Dampers *For more details, please download the PDF or feel free to contact us.