能登谷商店 List of Products and Services

The developer originally had an interest in communication between robots and humans and was conducting research in artificial intelligence. Due to concerns about "losing the ability to be independent," they began developing machines that could move and assist with autonomy. The reason for adopting pneumatic artificial muscles was the pursuit of something that is lightweight, soft, and powerful when worn on the body. Throughout the development process, they experienced many failures, but the belief that "this technology is absolutely necessary" supported their efforts.

• others

We handle Daikin's "Commercial Multi Air Conditioners" and "Equipment and Factory Air Conditioners." The "Commercial Multi Air Conditioners" include types that can blow air in four directions even in small spaces, as well as wall-mounted types that are easy to install and can be added conveniently. Additionally, the "Equipment and Factory Air Conditioners" are beltless types that are top-class in energy-saving performance, and can be customized to fit the installation environment. 【Lineup (partial)】 <Commercial Multi Air Conditioners> ■ Ceiling-mounted cassette type S-Round Flow ■ Ceiling-mounted cassette type Round Flow ■ Ceiling-mounted cassette type Compact Multi Flow Square Cassette ■ Ceiling-mounted cassette type Eco Double Flow ■ Ceiling-mounted cassette type Single Flow *For more details, please download the PDF or feel free to contact us.

• Other air conditioning equipment
• air conditioning
• Air Conditioning System

The single type can switch the heater orientation between vertical and horizontal with just one touch. No screws or locks are needed, and it can be easily changed manually. If you want to heat in a linear fashion, use it vertically; if you want to heat a wider area, use it horizontally, allowing for versatile use in one unit. The switch lights up during operation, preventing forgetfulness in turning it off. The twin and triple types come standard with casters, making it easy to move by holding the handle. It features an excellent infrared heater that warms the body from the core with wavelengths of 3 to 20 microns, which are most easily absorbed by the human body. This is a new model that uses a rotary switch.

• others

At Notoya Co., Ltd., we handle cutting tools from Fujikoshi Co., Ltd. We offer a variety of products, including the "GSX MILL Ball," a ball end mill that covers general to ultra-high-speed applications, and the "WAVY MILL NWEX," which achieves both high-efficiency machining and high-quality surface finishes. In addition to our trading company functions, we also provide comprehensive consulting services in technology, including various design, manufacturing, and construction services. Please feel free to contact us when you need assistance. 【Products We Handle (Excerpt)】 ■ GSX MILL Ball ■ GSX MILL ■ WAVY MILL NWEX Type ■ GS MILL Long Neck Series ■ DLC Drill and Mill Series ■ AG Mill Series *For more details, please download the PDF or feel free to contact us.

• End Mills

We handle a variety of grinding wheels. Our lineup includes the "Mecha Kire," a cutting wheel for metal and stainless steel, and the "Ceramic Rubber Polisher" series, which is made by thoroughly kneading and molding a ceramic filler that has undergone special treatment into a rubber substrate. These products are revolutionary for finishing and deburring processes. Additionally, we strive to quickly provide everything needed on-site, with over 1,000 manufacturers in our portfolio and a rich variety of products. As a comprehensive technology consultant, we also accept various design, manufacturing, and construction requests. 【Partial Lineup】 ■ Cerablock ■ Cerablock Extra Large ■ Cerastick Eco ■ Ceradisc ■ Tact Free TF1 (Stainless)・TF2 (Metal) *For more details, please refer to the PDF materials or feel free to contact us.

• Grindstone

●Reduced cutting resistance ●Suppression of chatter ●Improvement in surface roughness and roundness ●Smooth chip removal ●Regrindable ●Contents (φ6.3, φ8.3, φ10.4, φ12.4, φ16.5, φ20.5, in a steel case)

• drill

This is a turning tool with a chip brazed to the shank. Please check the manufacturer's catalog for compatibility before making your selection.

• byte

This is a turning tool with a chip brazed to the shank. Please check the manufacturer's catalog for compatibility before making your selection.

• byte

This is a turning tool with a chip brazed to the shank. Please check the manufacturer's catalog for compatibility before making your selection.

• byte

Features Resistant to falling under the influence of wind Less affected by water flow, making it difficult to be swept away Effective for counter-terrorism due to good visibility inside Reduces plastic materials and contributes to SDGs

• Work tools

【Features】 - Effective for various applications from dry debris to liquids - High suction power maintained with filter dust removal function - Lightweight plastic body + casters for easy mobility 【Applications】 - Suction of fine dust and debris - Collection of wastewater

• Industrial Vacuum Cleaners

Proposal for cutter design and processing technology tailored to gear specifications Design proposals based on gear specifications and shapes Surface treatment aligned with sky diving processing Selection of optimal tool materials

• Gear cutting machine/Gear finishing machine

Outstanding performance without scoop face coating Compatible with both dry and wet processing Long lifespan with resharpening specifications without scoop face coating

• Gear cutting machine/Gear finishing machine

Supports processing from high-speed dry machining to wet machining. SP Hob: Capable of high-speed dry machining at 300 m/min, with long tool life even for high-hardness materials. GP Hob: Supports a wide range of processing environments from dry to wet.

• Gear cutting machine/Gear finishing machine

Achieving both high-efficiency machining and high-quality finishing Insertable end mills that balance high-efficiency machining and high-quality finishing Supporting a wide range of machining with a rich variety of inserts

• End Mills

Ideal for high-speed finishing of high-hardness materials CBN ball end mills are optimal for high-speed finishing of high-hardness molds Achieves long tool life in finishing processes

• End Mills

Excellent cost performance for intermediate finishing. The newly developed high-alloy high-speed steel and AG coating maximize the balance of wear resistance, toughness, and chipping resistance, enabling high-efficiency machining. Ideal for intermediate finishing from rough machining. Demonstrates stable performance in high-efficiency machining of grooves and sides.

• End Mills

Exhibits excellent cost performance in heavy cutting processing. The newly developed high-alloy high-speed steel and AG coating maximize the balance of wear resistance, toughness, and chipping resistance, enabling high-efficiency processing. Stable processing is possible even in heavy cutting. Ideal for high-efficiency rough machining of grooves and sides.

• End Mills

Achieving long-lasting processing of non-ferrous metals 100% diamond coating Ideal for non-ferrous metals such as aluminum alloys Over 10 times longer lifespan than untreated products in aluminum alloy processing Series Diamond Coated Drill Diamond Coated FF Drill

• End Mills

High-efficiency deep pocket machining of aluminum alloy Coated with DLC, which has high hardness, low friction coefficient, and excellent wear resistance The DLC coating and large chip pocket improve chip evacuation, enabling high-efficiency machining Excellent machining accuracy allows for high-quality processing

• End Mills

High-efficiency deep pocket machining of aluminum alloy Coated with DLC, which has high hardness, low friction coefficient, and excellent wear resistance The DLC coating and large chip pocket improve chip evacuation, enabling high-efficiency machining Excellent machining accuracy allows for high-quality processing

• End Mills

Achieving dry machining of aluminum alloys Coating with DLC that has high hardness, low friction coefficient, and excellent wear resistance Excellent chip evacuation achieved through DLC coating, strong torsional angle, and wide pocket design Series DLC Mill for Aluminum, DLC Mill Radius

• End Mills

Achieving ball precision of 3μm beyond common sense R precision ±3μm, R range 180° fully guaranteed Ideal for polishing-free processing of precision molds

• End Mills

Continuous processing from drilling to pocket grooves Coated carbide end mills capable of continuous processing from drilling to pocket grooves Low variation in cutting resistance allows for high-efficiency processing even with small machining centers.

• End Mills

Optimal for high-efficiency medium finishing machining Coating carbide end mills suitable for rough to medium finishing machining Achieves high-efficiency machining even with small machines

• End Mills

Optimal for high-efficiency rough machining Achieves stable machining with a wave-shaped serrated cutting edge ideal for rough machining of molds and similar applications Long lifespan due to excellent high-temperature hardness and toughness of ultra-fine particle cemented carbide with a smooth coating

• End Mills

Optimal for high-efficiency, precision finishing of high-hardness material molds. With the adoption of a newly developed lubrication coating, friction resistance during cutting is reduced, and wear resistance is also improved. Achieves high shape accuracy of +3 to -7 μm with one-pass grinding, enabling high-precision processing.

• End Mills

Achieving ultra-high-speed machining Ultra-high-speed machining at a cutting speed of 800m/min is possible with aluminum-rich GS hard coating The new cross-sectional shape balances chip evacuation and tool rigidity Improved durability with new ultra-fine particle carbide

• End Mills

A rich selection that accommodates all fine machining of molds. High precision and long life due to ultra-fine particle cemented carbide and GS coating. Seamless processing with outer peripheral blades achieves ball accuracy of ±5μm. A wide range of products: Series 335 items. Series: GS MILL Long Neck Ball, GS MILL Long Neck 2-Flute, GS MILL Long Neck 4-Flute.

• End Mills

Achieving both high-efficiency machining and high-quality finishing Insertable end mills that balance high-efficiency machining and high-quality finishing Supporting a wide range of machining with a rich variety of inserts

• End Mills

Super versatile carbide end mill that does not require a specific usage method. By adopting fine-grained carbide with high resistance to breakage and excellent thermal shock resistance, reliability in wet processing of raw materials is improved. The use of the new GSX coating, which enhances wear resistance and heat resistance, increases longevity and reliability across a wide range of work materials.

• End Mills

High-efficiency rough machining ultra-hard end mill Improved chipping resistance through optimization of cutting edge and nick shapes Enhanced wear resistance and heat resistance with GSX coating, resulting in longer tool life

• End Mills

A ball end mill that covers from general-purpose to ultra-high-speed areas. The smooth streamlined ball blade shape ensures good chip evacuation. Capable of high-speed machining from raw materials to stainless steel and high-hardness steel. Enhanced heat resistance, wear resistance, and anti-adhesion properties with GSX II coating for long tool life.

• End Mills

Unequal division and unequal lead that suppress vibration with a 6-blade design. Achieves high-efficiency and high-precision finishing due to excellent cutting performance and high rigidity. Enables high-speed machining from raw materials to titanium alloys and heat-resistant alloys. Enhanced heat resistance, wear resistance, and adhesion resistance with GSX II coating for a long lifespan. Additional release of radius.

• End Mills

Ideal for machining vertical walls up to a height of 5D Expansion of applications with the long shank design of VL to suppress vibration Achieves high-speed machining from raw materials to titanium alloys and heat-resistant alloys Enhanced heat resistance, wear resistance, and adhesion resistance with GSX II coating for long tool life Additional release of radius options

• End Mills

A series categorized by application, with Ti·SUS suitable for titanium alloys and the steel type suitable for carbon steel and alloy steel. Improved heat resistance, wear resistance, and anti-adhesion properties with GSX II coating.

• End Mills

Ultra-hard end mills optimal for machining high-hardness materials. By adopting uneven division and uneven lead, chatter is suppressed, achieving high-quality machining. With a groove shape ideal for high-hardness materials, chip evacuation and tool rigidity are improved. High heat-resistant carbide grades and GSX II coating ensure long tool life.

• End Mills

Ultra-hard end mills optimal for machining high-hardness materials. By adopting unequal division and unequal lead, chatter is suppressed, achieving high-quality machining. With a groove shape ideal for high-hardness materials, chip evacuation and tool rigidity are improved. High heat-resistant carbide types and GSX II coating ensure long tool life.

• End Mills

As the third installment of the Aqua REVO series, the "Aqua REVO Mill" has been developed. It adopts uneven division and uneven lead to suppress chatter vibrations. The REVO-M coating, which has high heat resistance and thermal shock resistance, demonstrates excellent durability in both dry and wet processing. It is compatible with a wide range of work materials, from general steel to stainless steel and high-hardness materials.

• End Mills

Adoption of newly developed groove-shaped air flute, demonstrating overwhelming chip removal and cooling effects, achieving high efficiency and long tool life even in side machining and grooving of difficult-to-cut materials like stainless steel.

• End Mills

The bottom edge side (tool tip side) has a right-hand spiral blade, while the shank side has a left-hand spiral blade, creating a double helical design that suppresses burrs on the top and bottom surfaces of the workpiece. Due to the action of the left-hand spiral blade, the machining surface deviation is smaller than that of a standard end mill, achieving high machining precision.

• End Mills

Ideal for rolling screw processing of non-ferrous metals such as aluminum. Since there are no chips produced, there are no troubles caused by chips, and the variation in screw accuracy is minimal. The fiber flow of the material is not interrupted, resulting in high internal thread strength.

• Tap

The newly developed ZT coating achieves excellent wear resistance, heat resistance, and low friction. The newly developed oil groove ZT flute (PAT.P) demonstrates high lubrication performance even in horizontal machining centers. A new material specifically designed for raised taps that balances toughness and hardness has been developed. It accommodates a wide range of work materials, achieving overwhelming longevity and low torque.

• Tap

From material heat treatment to manufacturing, inheriting the technology of our existing tap series, SG Tap and Hyper Z Tap. Designing optimal shapes with an emphasis on versatility. Stable processing with minimal variation, regardless of processing equipment, tooling, or workpiece material. Outstanding long life.

• Tap

Adoption of high vanadium high-speed steel suitable for tapping processing characteristics. Achieving stable screw machining with a high rigidity design.

• Tap