トーコー List of Products and Services

In the car paint polishing process, the factory is dark, the factory lighting is too high and hard to see, the position of the lighting is poor, and so on... We solve almost all of these problems. With a standalone type that can illuminate from above and from the side, a wide main light with three fluorescent tubes, and two colors of spotlights in daylight white and warm color, you can see almost all fine scratches and aurora marks. The brightness is not too strong, making it less tiring for the eyes, yet it allows you to see scratches without missing any, creating a revolutionary lighting solution. With this, the struggles of polishing are greatly reduced.

• Work Light
• LED lighting
• Light source/lighting

This is the largest and lightest (we take pride in this) handheld UV irradiator available. While emitting powerful UV light, it successfully avoids emitting any harmful UV-B or UV-C wavelengths, allowing for the curing of UV putty and similar materials with sufficient irradiation intensity. The irradiation area can cover a size similar to an A4 sheet of paper in a single operation. It also comes with a standard stand, enabling use without holding it in hand. For regular UV putty, curing is possible in 20 to 40 seconds. Additionally, it has a built-in timer to prevent overexposure.

• Ultraviolet irradiation equipment
• Drying Equipment

Isn't it a bit concerning to use a common spray stand for heavyweight parts painting? With the Promotech sturdy stand, it won't budge even over 100 kg. There are no issues at all with large casters, even with grating. It's the strongest stand in the history of spray stands. Are you having trouble with painting parts for large vehicles or special vehicles? You definitely won't regret using it. If you're in need, please feel free to consult us.

• Painting Machine
• spray
• Other painting machines

With the original attachment, you can achieve an incredibly smooth finish. Are you using the tip when operating the belt sander? The tip pulley will inevitably wear out due to pressure and heat. Since the pulley is curved, it’s difficult to sand flat surfaces. Is only the middle or the edges of the belt wearing down? If so, the pulley is worn out and not functioning properly. This is the reason why the belt breaks quickly. The TFB-1012 has an original attachment made of metal parts, so it does not wear out. The tip pulley is a large one, which can withstand a certain amount of use. Please give it a try at least once.

• Other painting machines
• Other abrasives
• Grindstone

In the scorching heat, painting work in a coverall... "It's too hot to concentrate," "My body can't take it." Responding to such voices is the Cool Painter. By simply sending cool air into your usual work clothes, it creates an astonishingly comfortable environment. It's easy to use. Just attach the air hose to the coverall and let the cool air flow in from your back. Even during masking and surface preparation, you won't be drenched in sweat, and your work efficiency will significantly improve. Starting in June 2025, heat stroke prevention measures will be mandatory for businesses. But we want you to start without waiting. Make a body-friendly choice before you suffer from heat stroke. Your "usual coverall" transforms into "gear to get through summer." Let's deliver a refreshing breeze to your back right now.

• Cooling system
• Other heating and cooling equipment
• Other factory equipment

The promo handy eye box that can be used at 100V has been upgraded to include a built-in digital timer. It offers a heating range that is unimaginable from its body size. Since it uses a 147mm halogen lamp, rapid heating in a small area is also possible. When used for removing sign sheets, it can peel off without leaving any adhesive residue, almost like magic.

• Drying Equipment
• Hand dryer
• Heater

A long-selling product with 30 years since its launch Even after 30 years, its presence remains unchanged This size can use a near-infrared heater. Of course, it dries paint, but it also plays a significant role in the drying effects of primers and putties in automotive body painting. It dries moisture after washing, is a heater that doesn't blow air, and there's a reason for its 30-year history. It's also great that it can be used with a household power supply (100V). Please use it widely for both work and hobbies. If you're interested, we look forward to hearing from you.

• Heating device
• Electric furnace
• Other heating and cooling equipment

The "SIR-F50" is an infrared paint drying machine that uses halogen lamps. It features a new design, a wide irradiation range (W: 2200, H: 1340), and boasts a maximum height of 2.5 meters, making it a high-end product. By installing an optional temperature sensor, precise temperature management is also possible! There is nothing better for drying automotive paint. The digital controller, designed specifically for promotions, has a soft start function that suppresses the inrush current characteristic of halogen lamps, further extending their lifespan. Additionally, with side irradiation, a wide heater panel allows for extensive irradiation at once. The lamps can be turned on and off individually, reducing unnecessary power consumption and saving on electricity costs. 【Features】 ■ Enables fast and complete drying by irradiating immediately after painting ■ Automatic switching between pre-drying and main drying modes ■ Allows for immediate 100% heating when the power switch is turned on ■ Special reflective shape enhances irradiation efficiency ■ Capable of drying the roofs of high vehicles such as vans, SUVs, and commercial vehicles *For more details, please download the PDF or feel free to contact us.

• Other drying equipment
• Drying Equipment
• Heating device

The irradiation panel, though small, enables extensive heating using the characteristics of near-infrared radiation. Equipped with a radiation temperature sensor, the heater panel measures the temperature of the coated surface and automatically maintains optimal output. You can choose from three drying modes: silver paint drying, drying of other paint colors, and putty drying. We provide optimal drying according to the situation. You can select either "automatic output" using the radiation temperature sensor or "manual output" based on a set output value. You can freely choose the method according to your application. The control box with an easy-to-use LCD screen allows you to easily set your preferred drying settings. Halogen lamps have a unique phenomenon called "inrush current," which significantly shortens their lifespan. To prevent this phenomenon, we have adopted a soft start function, extending the lifespan of the halogen lamps, making them a long-lasting choice. We have developed an intuitive and easy-to-understand lift lever that allows for easy adjustment of the heater panel's position. It is much lighter compared to our other models, providing excellent operability. Additionally, it is priced as a low-cost option among heaters of the same class.

• Heating device
• Drying Equipment
• Heat Treatment Drying Equipment

High-speed drying of your products with a halogen lamp heater! It heats and dries not only paints, inks, and adhesives but also all kinds of items! Our heater uses short-wave infrared (near-infrared), ensuring thorough heating deep inside! Additionally, with a parabolic reflector, it provides powerful and uniform irradiation! Of course, it is highly durable and of high quality! Feel free to consult us starting from just one halogen lamp heater! We offer a wide range of sizes from large to small! We meet all kinds of needs! ◆ Toko also engages in the design and development of heating equipment ◆ We flexibly respond to sites that require custom-made solutions! Please consult Toko, the professional in heating equipment!

• Painting Machine

It can brightly illuminate a wide area. Up to 8 units can be connected from a single outlet! Ceiling mounting is possible! It can be attached to metal walls with magnets! *Only compatible with magnetic metal surfaces. Additionally, a separate power source is also possible! Please feel free to contact us!

• LED lighting

The "PD PROMO PD-5153 (3-lamp type)" is an inkjet printing dryer that quickly dries using the power of near-infrared light. With the near-infrared ink dryer "PD PROMO," you can achieve shorter delivery times, maintain quality, and improve work efficiency! It uses long-life near-infrared halogen lamps, which heat up immediately without the need for preheating, preventing drying failures. <Features> ● Achieves quick drying. When the power switch is turned on, it can immediately generate 100% heat, allowing for irradiation right after printing. ● Adjustable irradiation time with a timer. This reduces the hassle during drying. The height and angle of the heater can be adjusted, allowing for flexible irradiation suited to the printed materials. ● The irradiation output can be adjusted according to the media being dried. You can choose from three levels: 70% output, 85% output, and 100% output. ● Domestic product with quick maintenance response. ● Adopts a special reflector shape that maximizes irradiation efficiency, drying the media evenly and without unevenness. ● Automatically stops due to tilting or vibration of the heater body.

• Drying Equipment

Born in response to the demand for a single masking process even for larger vehicles with high ground clearance! For larger vehicles, the conventional 5m class required two masking processes to cover the entire vehicle, but with BMF6.0, masking can be done in one go, improving work efficiency and reducing costs. It can be widely used not only in the automotive repair industry but also for protective measures during construction.

• Other consumables

The "Promo Series" is an infrared paint drying machine that uses halogen lamps. Compared to the mainstream "far infrared drying machines" used for automotive paint drying, it has a faster temperature rise, improving drying time and power consumption! Additionally, it has excellent compatibility with high-quality coatings such as urethane resin paints. Since the irradiation section can be heated immediately, it can replace conventional drying ovens, improving costs and space. <Lineup> ● SIR-F50: The high-end model SIR-9810W has evolved! It can easily dry the roof of a Hiace! ● SIR-6624: A 6-lamp model with a standard temperature sensor; this is the one to choose if you're unsure! ● SIR-3458S: Comes standard with a temperature sensor to avoid troubles through temperature management. ● SIR-2220D: Lightweight and easy to move. Can be changed from 2 lamps to 3 lamps with optional equipment. ● SIR-813D: A compact model that can be used handheld or mounted on a stand. ● SIR-1712D: More compact, suitable for light repairs. <Features> ● Capable of drying paint in 15 minutes. ● Quick irradiation immediately after painting allows for complete drying. ● Suitable for drying two-component urethane paints. ● Can achieve 100% heat generation immediately after turning on the power switch.

• Painting Machine

The world's first promotional rail hang system features the Promo2 irradiation panel in a ceiling-mounted configuration. By installing a custom aluminum rail on the ceilings of factories and sanding spaces, this system allows for the drying of painted roofs, side panels, bonnets, and more, effectively utilizing factory space. - "Good workability in a cordless environment" - "Reduction in painting drying time" - "Lower running costs" - "Shortened work time" We propose a ceiling-mounted environment tailored to the layout and requirements of your factory.

• Other painting machines

The "PD PROMO PD-5102 (2-lamp type)" is an inkjet printing dryer that quickly dries using the power of near-infrared light. With the near-infrared ink dryer "PD PROMO," you can achieve shorter delivery times, maintain quality, and improve work efficiency! It uses long-life near-infrared halogen lamps that heat up instantly without the need for preheating, preventing drying failures. <Features> ● Achieves quick drying. When the power switch is turned on, it can immediately generate 100% heat, allowing for irradiation right after printing. ● Adjustable irradiation time with a timer. This reduces the hassle during drying. The height and angle of the heater can be adjusted, allowing for irradiation tailored to the printed materials. ● Irradiation output can be adjusted according to the media being dried. You can choose from three levels: 70% output, 85% output, and 100% output. ● Domestic product with quick maintenance response. ● Adopts a special reflector shape that maximizes irradiation efficiency, drying the media evenly without unevenness. ● Automatically stops due to tilting or vibration of the heater body.

• Drying Equipment

Compact type that does not require a designated storage location. Despite its compact size, it has a wide irradiation range (W:900・H750), allowing for drying of items the size of a light vehicle door in one go. It is low-priced yet comes standard with a temperature sensor, offering usability that is unmatched. <Features and Benefits> ● Equipped with a radiation temperature sensor for temperature management during drying ● Temperature management function of the radiation temperature sensor prevents issues caused by overheating ● Near-infrared dryer using halogen lamps ● Newly designed controller with LCD display ● Upper and lower halogen lamps can be turned on and off individually ● Supports non-styrene putty that requires temperature management with putty drying mode ● Three drying modes (silver painting, other painting, putty drying) included ● Improved operability with LCD screen display

• Painting Machine

The "PD PROMO PD-KD Series" is a high-speed printing compatible dryer that quickly dries using the power of near-infrared light. It allows for output settings tailored to printing and transport speeds, and can be installed according to the transport mechanism. It supports high-speed printing of over 150m/min, contributing to improved production efficiency. It uses long-life near-infrared halogen lamps, which heat up immediately without the need for preheating, preventing drying failures. The cooling time is also minimal. <Features> ● Compatible with various works and inks ● Can be set to a compact length of approximately 1 meter ● Adjustable distance from the work for reliable and clean drying ● Domestic product with quick maintenance response

• Drying Equipment

- The cans that can be used are 4L round cans / 4L square cans / 1L round cans (using the included dedicated attachment). - This product was developed for heating paint used in painting, but it is also suitable for heating urethane-based and epoxy-based adhesives that harden in winter. - By placing hot water in a metal container, it can maintain warmth and can also be used for a water bath. Note: Since temperature adjustment is not possible, excessive heating beyond what is necessary will deteriorate the paint and adhesive, so please avoid leaving it for long periods.

• Other work tools

Near-infrared halogen lamps promote drying and curing from the inside of the target object, thereby reducing the occurrence of defects such as insufficient drying or curing. Additionally, they reach the required temperature instantly when powered on, allowing for efficient processing in a short time. This contributes to cost reduction through energy savings and is also environmentally friendly. We provide drying and heating performance tailored to the purpose, application, and materials being dried, and we design according to various materials and objectives. ■ Features - Fast response - High-quality infrared radiation unaffected by ambient temperature due to lamp-type radiant heating - Uniform irradiation reduces uneven baking and drying - Contamination-free clean heating, regardless of heating atmosphere such as in air or vacuum - Long lifespan design of approximately 3,000 to 5,000 hours (varies depending on usage environment and output) * For details, please download the PDF or contact us.

• Other semiconductor manufacturing equipment