パル Product Lineup

The "Micromag" is a magnetic filter that can remove fine iron particles at a submicron level simply by being attached to existing piping. The patented "magnetic circuit design" prevents pressure drops during use! The cover is transparent, allowing for visual confirmation of sludge conditions. It is ideal for use in machine tools such as grinding machines, machining centers, and lathes, contributing to the longevity of pumps and filters. 【Features】 ■ Economical due to minimal consumables ■ Uses 4500 Gauss neodymium magnets ■ Easy removal of sludge ■ No electricity required ■ Capable of removing some particles that do not adhere to abrasives or magnets due to heterogeneous coagulation *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

The Abanaki Oil Boss is an innovative tool that keeps coolant oil-free. Its portability and magnetic base reduce production loss and maintenance time, making it easy to clean various samples and tanks around factories and workspaces. 【Features】 - Can be installed anywhere in the factory thanks to the magnetic base. - The reversible design prevents tangling of hoses and cords. - Lightweight and easy to carry. - Easy oil collection and discharge, making cleaning simple. - Does not require floor space. - Tubes, mops, discs, and belts do not wear out. The filtration material can be easily cleaned and reused. - Removes floating oil that traditional skimmers cannot eliminate.

[Case Study] Introduction of tapping processing using horizontal machining!! - Before Improvement For taps with short protrusions, it was difficult to aim for a pinpoint from the upper side of the tool's groove due to water splashing on the arbor or workpiece. - After Improvement By using elbows and conversion joints to avoid interference with the ATC and tool temporary storage, and by allowing for flexible bending, we were able to hit the target area precisely. Successfully cooled the tool and workpiece at pinpoint locations. This led to improved finishing of the workpiece and extended tool life.

The "Coolant Saver" is designed to enable the reuse of coolant and coolant oil that typically accumulates in standard chip containers when using an automatic chip container with CNC machines. It consists of a venturi unit that is installed as a branch in the piping supplying coolant or cutting oil to the machine tool, and a vacuum cup placed at the bottom of the chip container. The venturi unit is equipped with a ball valve that can be shut off as needed, and a 12mm PU hose attached to the bottom of the venturi unit directs the collected coolant back to the main tank of the machine tool. 【Features】 ■ Composed of a venturi unit and a vacuum cup placed at the bottom of the chip container ■ The vacuum cup is connected to the venturi unit using a 6mm PU hose ■ The venturi unit has a ball valve that can be shut off as needed ■ The vacuum cup and filter are made of high-quality stainless steel *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the benefits of installing the Micromag MM20 on a discharge machining machine as a case study!! The Micromag filters cutting fluid from steel materials and removes very fine iron particles. By eliminating these fine particles, the liquid becomes cleaner, which reduces secondary sparks, significantly decreases energy consumption, and minimizes wire breakage, making the process even more efficient. As a result of the reduction in wire breakage and secondary sparks, a significant increase in the machine's cutting speed was observed, with improvements ranging from 17% to 30% in tests.

The "AutoMag" uses powerful magnets (neodymium), allowing for the removal of fine iron powder at sub-micron levels, resulting in a large flow rate and contamination capacity! It has numerous applications in machine tools such as grinding machines, cleaning machines after automotive painting, and automotive and parts cleaning machines. <You can also watch the video from the button below!> 【Features】 - The fully automatic magnetic filtering system is ideal for continuous manufacturing lines. - Unlike regular filters, there are no consumables, reducing operational costs. - There is no need to stop production for cleaning, which can reduce downtime. *The catalog, which includes case studies and a filtering comparison table, can be downloaded from the link below.

The "Auto Filterex" is a magnetic filter system suitable for machining applications of metals, including iron, in processes such as grinding, honing, lapping, shaping, and hardening. It is equipped with a function to automatically discharge contaminants accumulated in the filter, reducing cleaning and replacement costs. It significantly lowers the costs of operation automation, fluids, and filter consumables. 【Features】 ■ High magnetic force of 9000 Gauss for high-precision recovery of submicron metal powders ■ Continuous filtering available year-round ■ Maintenance-free, greatly reducing running costs ■ Easy-to-install manual cleaning type also available in the lineup *For more details, please refer to the materials available for download in PDF format. *Meetings via Zoom are possible. Please feel free to contact us!

The correct direction of the coolant and the flow rate sent to the tool's cutting edge are ensured, bringing many advantages to both productivity and the quality of machined parts. 【Features】 ■ Enables rapid and accurate preparation. ■ Avoids potential human errors through optimal coolant distribution to the tool holder. ■ Adapts to various types of screws for tool holders and distribution blocks. ■ The flexible reinforced tube braided with stainless steel is prepared to withstand the impact of hot chips at pressures up to 220 Bar.

**Features** ■ Quick Position Connection The quick change system uses a ball locator method, where pulling back the outer sleeve releases the coupling on the OS side. Once connected, rotation is locked, and nozzle readjustment is unnecessary. Simply connect the steel coolant nozzle and copper pipe to the coupler to complete the installation. This enables rapid setup changes and tool exchanges. ■ Quick Position Connection This new system consists of two parts, with one part being screwed into the other. The outer diameter has a knurled finish (anti-slip processing) to allow for hand tightening and loosening without tools. It has no play and is suitable for connecting numerous joint components. Installation is complete by simply connecting the steel coolant nozzle. It supports high-pressure coolant up to 70 Bar. This enables rapid setup changes and tool exchanges.

The non-return valve can be connected to the mechanical connection, coupling, quick position connection, or nozzle of a steel coolant nozzle. It is ideal for general machining and grinding processes. This helps avoid the following issues: - There is no time lag between the activation of the coolant pump and the coolant supply, ensuring that the coolant is always maintained at a filled state. - By preventing coolant dripping when the pump is stopped, it avoids situations where coolant splashes onto the workpiece while the operator is setting up or inspecting it.

【Features】 This is a specially designed slot and tube nozzle for grinding applications that can accurately supply coolant to the contact point between the grinding wheel and the workpiece, with minimal diffusion.

Efficiently collects floating oil from industrial cleaning solutions, cutting oils for machine tools, and lubricants.

The "Pinpoint Coolant Supply System" that we handle is an easy-to-use lubrication oil supply system. Its main feature is that it does not require the troublesome fixing with nuts that is necessary with other products. This nozzle has a very fast discharge speed and excellent chip removal performance. Additionally, while several tens of plastic nozzles are needed for lubrication, our nozzle can lubricate the grinding area precisely with just one unit. By lubricating precisely, the amount of coolant is reduced, leading to cost savings and a reduction in CO2 emissions. [Example] 630L/min ⇒ 380L/min [Features] ■ No troublesome fixing with nuts required ■ Reduction in overall cutting oil consumption ■ Reduction in machine operating time ■ Cost savings (improved lifespan of grinding wheels) ■ Improved filtration quality ■ Reduction in defective products *For more details, please refer to the materials. Feel free to contact us as well.

The flexible coolant nozzles we offer can be used with fixed head and Swiss-type CNC lathes, vertical and horizontal machining centers, grinders, or transfer machines for low, medium, and high pressure applications. 【Features】 ■ Can be used hand-tightened at pressures below 20 bar (However, for high pressure, tightening with a wrench is necessary) ■ Capable of withstanding vibrations and pressure during cooling while maintaining position ■ Usable with water-soluble and oil-based coolants ■ The surface of the main body is nearly equivalent to stainless steel in terms of corrosion resistance *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

Grindaix's display device can visualize the interaction of coolant discharge speed, pressure, and flow rate in real time!!

We have demo units of two types: Coolant Saver and Oil Saver available for loan!! Please feel free to contact us!! ■ Coolant Saver / Oil Saver - Contributes to recycling cutting oil and coolant liquid that is discarded with chips, reducing waste by up to 90%. - Helps reduce the usage of coolant liquid by up to 50%. - Extends the lifespan of cutting oil and coolant liquid. - Easy to install and does not require an external power source.

The "Oil Saver" is designed to enable the reuse of coolant and cutting oil that typically accumulates in the chip container when using an automatic chip container with CNC machines. Coolant and cutting oil cling to larger chips and accumulate at the bottom of the chip container. The Oil Saver collects the liquid through a vacuum cup and returns it to the machine's main tank. It consists of a venturi unit that is installed as a branch in the piping supplying coolant or cutting oil to the machine tool, and a vacuum cup placed at the bottom of the chip container. The venturi unit is equipped with a ball valve that can be shut off as needed, and a 12mm PU hose attached to the bottom of the venturi unit directs the collected coolant back to the main tank of the machine tool. 【Features】 ■ Composed of a venturi unit and a vacuum cup placed at the bottom of the chip container ■ The vacuum cup is connected to the venturi unit using a 6mm PU hose ■ The venturi unit has a ball valve that allows for shut-off as needed ■ The vacuum cup and filter are made of high-quality stainless steel

The "Micromag" is a magnetic filter that can be installed onto existing piping to remove fine iron particles at a sub-micron level. 【Demo units MM5 and MM10 available for loan!】 * Customers wishing to borrow a demo unit should indicate "Request for demo unit" in their inquiry. * The loan period is limited to within two weeks. * For more details, please contact us.

To prevent falling and misalignment, the base and magnet are designed to be jointed. The shape of the core cleaning post has also been changed to match the magnet.