アキュレイトシステムズ List of Products and Services

The "Magnetic Induction Sensor for AGVs" detects the magnetic flux of guide tape laid on the floor, guiding unmanned transport vehicles (AGVs) to their destination and allowing them to run along the route. 【Features】 ■ Non-contact operation using magnetism, unaffected by dust, dirt, or oil ■ The induction sensor detects the magnetic field from the guide tape ■ Can be used by laying it over magnets if the surface is carpet or non-magnetic material ■ Enables the construction of an automatic guidance system at a low cost and with ease 【New Features】 〇 Outputs magnet center information for easier control 〇 Also outputs ON bit information, allowing for intersection control 〇 Simple connection for tidy wiring! Achieves high functionality with fewer ports 〇 Communication methods are RS232C and RS485 * For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

The "Smart Force Sensor" is a capacitive load displacement sensor that combines metal spring manufacturing technology with electronic control technology. It is very compact and does not require large auxiliary equipment like existing load cells. The detection and signal processing units have been simplified and miniaturized. *We created a demo device using the Smart Force Sensor and Arduino! When a weight is added and exceeds a set value, an LED lights up red. Please check out the YouTube video!!

• Other weight measuring instruments

This document introduces how to choose a "motor controller." This product supports many rotor position detection sensors such as Hall sensors and encoders. It allows for the control of two motors with a single controller, contributing to space-saving. It can help shorten the development time for motor control and makes motor control easier by using PC utility software and scripts. For a product lineup tailored to your application, ranging from a few watts to a maximum of 11 kW, single/dual channel, please refer to the PDF download for more details. [Contents] ■ Choose from motor output ■ Angle sensors ■ External dimensions ■ Video introduction *For more details, please refer to the PDF document or feel free to contact us.

• controller

The "DC Brushless Motor Controller" contributes to reducing development time for motor control in AGVs (Automated Guided Vehicles) and mobile robots. We offer single and dual channel types in the "SBL series," "FBL series," and "GBL series," including models that support high rotation speeds. In addition to supporting CAN communication, it is compatible with many rotor position detection sensors such as Hall sensors and encoders, and can also control servo motors. 【Features】 ■ Space-saving design as one controller can control two motors ■ Supports speed control, torque control, and position control, contributing to reduced development time ■ Development environment compatible with PC utility software, scripts, and robot development ROS ■ Compatible with many rotor position detection sensors including Hall sensors, encoders, and SSI ■ Supports various communication protocols and interfaces: CAN, RS232/RS485, Modbus, EtherCAT, EtherNetIP, Profinet *For more details, please refer to the PDF document or feel free to contact us.

• controller

We provide 'motor controllers' suitable for AGVs, mobile robots, and personal mobility devices. With a single controller capable of controlling two motors, it simplifies design and contributes to reducing maintenance effort and costs. We offer a wide variety of types, compatible with brushed, brushless, and AC induction motors. (A 1-channel type is also available.) 【Features】 ■ Control both drive and steering motors with a single controller ■ Free software available for setting adjustments and script creation ■ Supports serial communication such as CAN, enabling integration with external devices ■ Compact design with high heat dissipation performance, eliminating the need for a fan ■ Suitable for systems ranging from 12 to 120V and 10 to 500A *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.

• controller

This is a magnetic proximity switch/sensor that operates properly in environments of -30℃! It can be used even in extremely cold environments such as cold storage warehouses. Additionally, it can accurately detect even if there is metal (non-magnetic) between the sensor and the magnet. If you want to increase the detection distance, you can easily adjust it just by increasing the size of the magnet without needing to replace the sensor. 【Reasons to choose this product】 ■ Sensors can be installed in a row ■ Detection is possible even with metal between the sensor and the magnet ■ Detection distance can be easily adjusted *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "magnetic proximity switches and sensors" that we handle do not have an oscillation circuit, so there is no mutual interference even when installed side by side. Additionally, since they detect magnetic flux, they can properly detect even if there is metal (non-magnetic material) between the sensor and the magnet. Even if you want to increase the detection distance, there is no need to replace the sensor; you can easily adjust it simply by increasing the size of the magnet. ★ We are currently offering an application collection that includes usage examples! You can view it via "PDF Download." 【Contents of the Application Collection】 ◎ Replacement of mechanical limit switches ◎ Detection of pallets with positional shifts due to the presence or absence of loaded items ◎ Deceleration and stop using bipolar detection switches ◎ Application to guide sensors for AGVs * The product catalog is also available. Please feel free to contact us.

• Sensors

The magnetic proximity switches and sensors we handle are of the magnetic type that detects magnets. These sensors use Hall elements in the detection area and can detect a wide range of magnetic fields from low (0.5mT = 5 Gauss) to high (10mT = 100 Gauss), making them applicable to various applications. You can easily adjust the detection distance just by changing the magnet of the detection object! 【Features】 ■ Non-contact detection ■ Detected object (magnet) ■ Easy adjustment of detection distance ■ No mutual interference ■ Long lifespan *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

The magnetic-type proximity switches and sensors we handle are designed to detect magnets. These sensors use Hall elements in the detection part and can detect a wide range of magnetic fields from low (0.5mT = 5Gauss) to high (10mT = 100Gauss), making them applicable in various applications. Since they detect magnetic flux, detection is possible even if there is metal (non-magnetic material) between the sensor and the magnet! 【Features】 ■ Non-contact detection ■ Detects magnetic objects ■ Detection distance can be easily adjusted ■ No mutual interference ■ Long lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The magnetic proximity switches and sensors handled by our company are of the magnetic type that detects magnets. These sensors use Hall elements in the detection part and can detect a wide range of magnetic fields from low (0.5mT = 5Gauss) to high (10mT = 100Gauss), making them applicable in various applications. There is no mutual interference, and unlike other proximity sensors, there is no oscillation circuit, allowing the sensors to be installed side by side. 【Features】 ■ Non-contact detection ■ Detected object (magnet) ■ Easy adjustment of detection distance ■ No mutual interference ■ Long lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

Control system for AC induction motors with brush, brushless. Ideal for systems from 12V to 120V and 10 to 500A. A rich lineup of single and dual channel options. 【Features】 ■ Built-in battery voltage and temperature sensors ■ Compatible with all rotor sensors including Hall sensors, encoders, resolvers, Sin/Cos, and SSI ■ Automatic setup for brushless motors ■ Supports CANopen and serial communication ■ Field-oriented control (FOC) in sine wave mode

• AC Motor

With the "Magnetic Induction Sensor / Motor Controller for AGV," you can easily implement line tracing functionality without complex programming. The controller offers a lineup suitable for systems ranging from 12 to 120V and 10 to 500A. The sensor accurately measures deviations from the center of the track and can also detect magnetic markers. You can observe the magnetic field conditions on the course in real-time with the free dedicated software, contributing to trouble prevention and enabling faster product development. 【Features】 ■ Implement line tracing functionality simply by directly connecting the controller and sensor ■ The sensor ensures a horizontal resolution of 1mm and a detection distance of 10 to 60mm ■ Recognizes course branching and merging ■ Products are available that can control two motors with one controller ■ Ideal for AGV and robot development 【NEW】■ Easily supports remote control operation *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Sensors

The "Magnetic Induction Magnet for AGVs" is a magnetic tape used for magnetic induction type AGVs (Automated Guided Vehicles). By simply applying a guide tape (rubber magnet) to the floor, routes can be easily set, and it can flexibly accommodate layout changes. When used with our magnetic induction sensor "UDS-1213," a detection distance of up to 50mm can be achieved. 【Features】 ■ Routes can be easily set by simply applying a guide tape (rubber magnet) to the floor. ■ It can flexibly accommodate layout changes. *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

The "Rubber Magnet for Magnetic Proximity Switches" can be used as a detection body for magnetic proximity switches. It can be easily cut with scissors and comes with double-sided tape, allowing for flexible attachment. By sticking it to the desired location where you want the magnetic proximity switch to turn ON, you can easily achieve switching in a specific area. 【Features】 ■ Available with N and S poles on the surface using anisotropic magnets ■ Adhesive tape on the back side ■ Available in two thicknesses: 0.9mm and 1.6mm, with a width of 50mm *For more details, please refer to the PDF document or feel free to contact us.

• magnet

The "Magnetic Induction Magnet for AGV" is a guide tape (rubber magnet) that is embedded in grooves dug into the floor surface. It is installed along the route to guide the AGV (Automated Guided Vehicle) to its destination. It is suitable for outdoor areas or locations where heavy objects move, as it creates a flat floor surface. 【Features】 ■ Anisotropic magnet with two grooves on the N pole side ■ Types of magnets with a width of 6mm and thickness of 10mm, and width of 8mm and thickness of 20mm *For more details, please refer to the PDF document or feel free to contact us.

• magnet

The "Magnet for AGV Mark Sensor" is a mark magnet used to execute commands for AGVs (Automated Guided Vehicles) such as branching left or right and stopping. It is placed next to the guide tape (rubber magnet) adhered to the floor. The surface with the N pole is blue, and the surface with the S pole is green for easy identification. 【Features】 ■ Anisotropic magnet with separate surfaces for N pole and S pole ■ Comes with adhesive tape on the back ■ Magnet width of 50mm and thickness of 0.9mm *For more details, please refer to the PDF document or feel free to contact us.

• magnet

The "Color AGV Magnetic Induction Tape" is a guide tape (rubber magnet) installed along the route to guide AGVs (Automated Guided Vehicles) to their destination. It allows for easy route setup and can flexibly accommodate layout changes. With PET film processing, it is highly resistant to tearing and dirt. Additionally, it features a color laminated surface, making it suitable for color identification. 【Features】 - Anisotropic magnets with N and S poles available on the surface - Four colors: blue, green, yellow, and plain - Adhesive tape on the back - Width of 50mm and thickness of 0.9mm *For more details, please refer to the PDF document or feel free to contact us.

• magnet

The "Magnetic Induction Magnet for AGVs" is a guide tape (rubber magnet) installed along the route to guide AGVs (Automated Guided Vehicles) to their destination. It offers a lineup of seven types of R shapes suitable for guiding curves. With a PET film coating on the surface, it is highly resistant to tearing and dirt, significantly reducing the time required for application. 【Features】 ■ Anisotropic magnet with a north pole on the surface ■ PET film coating on the surface side ■ Adhesive tape on the back side ■ Formed into seven types of R shapes with a width of 50mm and a thickness of 1.0mm *For more details, please refer to the PDF document or feel free to contact us.

• magnet

The "Magnetic Induction Magnet for AGV" is a magnetic tape used for magnetic induction type AGVs (Automated Guided Vehicles). By simply applying a guide tape (rubber magnet) to the floor, routes can be easily set, and it can flexibly accommodate layout changes. The surface is processed with PET film, making it very resistant to tearing and dirt. 【Features】 ■ Anisotropic magnet with a north pole surface ■ PET film processing on the surface side ■ Adhesive tape on the back side ■ One roll of magnet with a width of 50mm or 30mm, thickness of 1.0mm, and length of 25m *For more details, please refer to the PDF document or feel free to contact us.

• magnet

The AGV (Automated Guided Vehicle) magnetic induction sensor [UDS-1213] detects the magnetic flux of magnetic tape and guides the automated guided vehicle to its destination. It accurately measures deviations from the center of the track with high resolution using a 3-axis gyro sensor and proprietary advanced signal processing. 【Features】 ■ No output influence from distance variations such as bumps and unevenness ■ High resolution of 1mm ■ Built-in output formats: RS232/PWM/Analog/CANbus/USB ■ Equipped with a 3-axis gyroscope *We have demo units available, so if you are interested, please include "Request for demo unit" in your inquiry.

• Other conveying machines

The "Smart Force Sensor" is a capacitive load displacement sensor that combines metal spring manufacturing technology with electronic control technology. It is very compact and does not require large auxiliary equipment like existing load cells. The detection and signal processing sections have been simplified and miniaturized. Additionally, by using an optional USB cable, you can easily check the output on a PC. 【Features】 ■ Capacitive type ■ No amplifier required ■ Strong against overload, making it easy to handle ■ Output method is UART (standard) ■ Achieves stable temperature characteristics and a wide operating temperature range * Demo units are available. * For more details, please refer to the PDF materials or feel free to contact us. * We have created a demo unit using the Smart Force Sensor and Arduino! Please check out the YouTube video!

• Other weight measuring instruments

This product is the "AGV Magnetic Mark Sensor," which detects magnetic flux from guide tape (rubber magnet). Since it is non-contact, it is unaffected by dust, dirt, oil, etc., and can be used laid on top of guide tape if it is made of non-magnetic materials such as carpet. 【Features】 ■ Non-contact, so it is unaffected by dust, dirt, oil, etc. ■ Can be used laid on top of guide tape if made of non-magnetic materials such as carpet ■ Standard detectable object: GT-390 series ■ Operating distance: 0 to 35 mm (from the surface of the magnet to the sensor detection surface) ■ Standard installation distance: 25 mm (from the surface of the magnet to the sensor detection surface) *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

It is a capacitive "smart force sensor." In addition to not requiring an amplifier, it is resistant to overload, making it easy to handle. The output method is UART (standard). 【Features】 ■ No amplifier required ■ Strong against overload and easy to handle ■ Output method is UART (standard) ■ Just connect to a PC *For more details, please refer to the external link page or feel free to contact us.

• Sensors

【Features of Magnetic Proximity Switches and Sensors】 These proximity switches are not affected by dirt, oil, or dust. They can detect non-magnetic obstacles. The detection distance can be adjusted by the magnetic flux. There is no mutual interference between sensors. *Please refer to the product catalog available for download below as "PDF Download."*

• Sensors

This is a magnetic tape installed along the route for autonomous guided vehicles (AGVs) to travel to their destination. By simply sticking the magnetic tape on the floor, the travel route can be easily set, allowing for flexible adjustments to the layout. Additionally, by installing mark magnets, acceleration, deceleration, and stop control can be managed.

• Other conveying machines

The "Magnetic Induction Sensor for AGVs" is a sensor designed to guide unmanned transport vehicles (AGVs) to their intended locations by detecting the magnetic flux of guide tape laid on the floor and driving them along the route. It can stably detect low magnetic fields (0.5mT) as well. Additionally, 15 magnetic sensors are arranged at 10mm intervals, with multiple magnetic switches positioned directly above the guide tape being turned ON and outputting in parallel. 【Features】 ■ Non-contact, unaffected by dust, dirt, oil, etc. ■ The induction sensor detects the magnetic field from the guide tape. ■ Can be used by laying it on magnets if the surface is carpeted or made of non-magnetic materials. ■ Allows for the inexpensive and easy construction of automatic guidance systems. *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

It accurately measures deviations from the center of the track with high resolution using its unique advanced signal processing. Additionally, it can detect over long distances even with narrow magnetic tape. For a 25mm tape, a clearance of 50-60mm can be achieved. In addition to track detection, it also detects magnetic markers placed on both sides of the track. When used with the UDS1213 and a dedicated two-channel motor controller, it can control autonomous robots. Easy setup and maintenance can be done with free PC software. The magnetic field as seen from the sensor can be visualized in real-time. 【Features】 - Large clearance from magnetic tape - No output influence from distance variations such as bumps and dips - High resolution of 1mm - Includes marker detection functionality - Recognizes branching and merging, allowing for more accurate branching and merging - Built-in output formats: RS232/PWM/Analog/CANbus/USB - Easy parameter setting and observation of installation and maintenance through the included software *Demo units are available.

• Other conveying machines