育良精機 List of Products and Services

We would like to introduce our accessory and processing machine, the 'ISL-20'. Comfortable operation at waist height even in narrow spaces. Ideal for shaft processing and long hours of unmanned operation. Please feel free to contact us when you need assistance. 【Specifications】 ■3.0M: Rod material capacity φ10-200 pieces, maximum weight 300kg ■4.0M: Rod material capacity φ20-100 pieces, maximum weight 1000kg *For more details, please feel free to contact us.

We would like to introduce our automatic bar supply machines, the 'OS20REII/OS16REII'. These models are expandable and capable of handling a variety of small lots, featuring a rich array of options that allow for high customization to meet various demands. They are ideal for processing materials under 1 inch and can accommodate not only round bars but also square and hexagonal materials. *Please feel free to contact us for more details.*

We would like to introduce our "Oil Cooler." It operates at liquid temperatures of 5 to 45°C and is compatible with both oil-based and water-soluble cutting fluids. By placing it under the feeding machine, it effectively utilizes dead space and contributes to increasing the production operating rate per floor area in the factory. 【Lineup】 ■ Inverter type "MRCC-07/MRCC-15" ■ ON/OFF type "MLCC-07/MLCC-15" *For more details, please feel free to contact us.

The "OS51・45・38・32REIII" is a feeding machine for thick materials that combines ease of use with vibration-damping functionality. Adjusting the material shelf is a simple operation that only requires inputting the material diameter on a touch panel, allowing for a reduction in setup time. Additionally, the vibration-damping support for the feeding arrow further enhances vibration performance, improving quietness. 【Features】 ■ Oil type ■ Touch panel ■ Re-tightening tip vibration stop ■ Receiving device ■ Next material receiving device *For more details, please refer to the PDF document or feel free to contact us.

The "OS38VRII・OS32VRII" is an automatic bar supply machine boasting a fully equipped 32 model that excels in functionality. It receives materials to be supplied to the rail and delivers them quietly and reliably. Additionally, with the next material receiving device, after supplying one material to the rail, it receives the next material as it moves and quietly shifts it to the standby position. 【Features】 ■ Oil type ■ Touch panel ■ Re-tightening tip vibration stop ■ Intermediate vibration stop ■ Synchronization device *For more details, please refer to the PDF document or feel free to contact us.

Starting with the "OS20VRII," we also offer the 16-inch type "OS16VRII" and the 12-inch type "O12VRII" in our lineup. High-pressure coolant and oil coolers manufactured by Ikura Seiki can be installed in the space between the stands. 【Features】 ■ Oil type ■ Touch panel ■ Synchronization device ■ Receiving device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

The "OS12REII-12/7" is a bestselling automatic bar feeder for 12-inch models that pursues convenience and uniqueness. For diameters of φ1 to 12mm, the length is 2.5M, and for φ1 to 7mm, it is 3.0M. For diameters of φ2 and below, the 7 model is recommended. The material supply guide arm ensures stable supply of materials ranging from thin φ1 to a maximum of φ12 using the same supply system. 【Features】 ■ Oil type ■ Touch panel ■ Tip vibration stop ■ Synchronization device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

"OS4REII" is designed to accommodate further fine material. Utilizing years of experience, it ensures a stable supply of ultra-fine materials without bending them through a unique system. "OS4REYII" separates and supplies one rod from a bundle of rods. It features a swing pickup system that automatically supplies one rod while reducing the load on the bundle. 【Features】 ■ Oil-based ■ Touch panel ■ Synchronization device ■ Receiving device ■ Next material receiving device ■ Option: Machine vibration stop *For more details, please refer to the PDF document or feel free to contact us.

The "SS110REII・SS90REII" is a high-performance fully automatic feeding machine for short and thick materials. The height adjustment of the material shelf and primary feeding V-rail is a simple operation that only requires inputting the material diameter on the touch panel, allowing for a reduction in setup time. When inserting the tip guide into the CNC lathe, the center adjustment can be done semi-automatically. 【Features】 ■ Oil-free ■ Touch panel ■ Tool-less ■ Receiving device ■ Next material receiving device *For more details, please refer to the PDF document or feel free to contact us.

The "SS65VRII/LS・SS51VRII" is a supply machine for medium-sized and short materials that has perfected its functionality. It receives materials to be supplied to the rail and supplies them quietly and reliably. The maximum length of the bar material is the length that fits within the main spindle. Since leftover materials are discharged forward, please ensure that it is acceptable for them to fall inside the lathe. 【Features】 ■ Oil-free ■ Touch panel ■ Tool-less ■ Receiving device ■ Next material receiving device *For more details, please refer to the PDF document or feel free to contact us.

The "SSH32II/LS・SSH20II" is a hopper-type feeding machine for short materials (leftover materials) that was born from the concept of "mottainai" (a Japanese term for wastefulness). It supports high-precision processing for materials shorter than 600mm. The sliding mechanism makes it suitable for setup changes and maintenance on the CNC lathe side. 【Features】 ■ Oil-free ■ Touch panel ■ Tool-free ■ Feed arrow confirmation ■ Hopper ■ Option: Slide *For more details, please refer to the PDF materials or feel free to contact us.

The "IH32・IH20" is an auxiliary machine and processing machine that allows for the effective utilization of leftover materials by being attached to the BARTOP. The rod material capacity is φ8-360 pieces, φ20-58 pieces, and φ32-23 pieces. The applicable material length and diameter vary depending on the feeding machine. 【Features】 ■ Enables effective utilization of leftover materials by being attached to the BARTOP ■ Rod material capacity: φ8-360 pieces, φ20-58 pieces, φ32-23 pieces ■ Applicable material length and diameter: varies by feeding machine ■ Option: top cover *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our products, the "IBC-30A" and "IBC-50H." The "IBC-30A" is a fully automatic material end processing machine, while the "IBC-50H" is a semi-automatic machine suitable for end processing of bar materials before placing them on the BARTOP. 【Features】 ■ IBC-30A - Fully automatic material end processing machine ■ IBC-50H - Semi-automatic - Ideal for end processing of bar materials before placing them on the BARTOP *For more details, please refer to the PDF document or feel free to contact us.

The "ISK-MPC2M・ISK-MPCD2M" is a medium-pressure coolant system. Space-saving and compact. It effectively removes chips with its efficient (medium-pressure) flow. Additionally, the double pump specification is suitable for situations where you want to discharge two systems simultaneously without reducing the flow rate. 【Features】 ■ Space-saving and compact ■ Can be installed in the lower space of an automatic bar feeder (bar top) ■ Effectively removes chips with its efficient (medium-pressure) flow ■ The double pump specification is suitable for discharging two systems simultaneously without reducing the flow rate *For more details, please refer to the PDF document or feel free to contact us.

The "ISK-HPC14MYII・10MYII・7MII" is a high-pressure coolant system. It contributes to increasing production efficiency per floor area of the factory, effectively removing chips, extending tool life, and enabling high-precision machining. It features a horizontal design unique to supply machine manufacturers, allowing it to be installed in the lower space of an automatic bar feeder (Bartop). Additionally, we also offer a dedicated "oil cooler" for the lower part of the supply machine. 【Features】 ■ Space-saving and low-profile ■ Horizontal design that can be installed in the lower space of an automatic bar feeder (Bartop) ■ Contributes to increasing production efficiency per floor area of the factory ■ Effectively removes chips, extends tool life, and enables high-precision machining *For more details, please refer to the PDF document or feel free to contact us.

We will be holding the "2024 Environmental Improvement New Year Campaign." We offer a lineup that includes the "Mist Changer," which comes standard with a unique secondary air adjustment feature, the "Parts Blow Cleaner," which blows parts without dirtying the work area, and the "Sludge Vacuum Cleaner," which allows for easy suction like a vacuum cleaner. Customers who purchase eligible products during the campaign period will receive a gift of premium salmon roe. 【Campaign Overview】 ■ Period: January to March 20, 2024 ■ Eligible Products - Mist Changer - Parts Blow Cleaner - Sludge Vacuum Cleaner *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "Parts Blow Cleaner ISK-PBC300II / 500II / 500HII" that we handle. It instantly sucks and collects oil and chips attached to parts when air is blown. With a detachable collection tank, waste can be easily disposed of without dirtying your hands. Customization is possible with various options, allowing for reduced air consumption while minimizing variations among operators. Additionally, it features a compact design with high mobility, making it easy to maneuver in narrow aisles crowded with lathes and feeding machines. Please feel free to consult us when you need assistance. 【Features】 ■ Instant suction and collection when gripping the blow gun ■ Instant suction and collection when stepping on the foot pedal ■ Air-driven, no power supply required ■ Safe design without fans or motors ■ Easy cleaning by eliminating protrusions inside the blow chamber *For more details, please download the PDF or feel free to contact us.

The "Mist Changer ISK-EM Series" is an electric dust collector that can capture both oil-based and water-soluble mist. To ensure collection performance, all models are equipped with a function that adjusts the airflow to the appropriate speed according to the airtightness and volume of the machining chamber of the automatic lathe. In high-temperature situations, it also helps to lower the temperature. Additionally, by standardizing the installation position, mounting method, and connections, the cumbersome preparation for installation can be simplified. 【Features】 ■ Compatible with high-concentration mist from medium and high-pressure coolant systems ■ Standard equipped with a unique secondary air adjustment function at the intake ■ Simplifies cumbersome installation preparation through standardization of mounting methods with dedicated frames ■ Capable of capturing both oil-based and water-soluble mist *For more details, please download the PDF or feel free to contact us.

The ISK-PWC350 allows for speed adjustment of the cleaning basket to match the work, and comes standard with a timer function. It also offers a bubble cleaning function that minimizes the risk of defects such as scratches and dents. The automatic liquid level rising type automatically raises the liquid level during cleaning and lowers it after cleaning for draining. By standardizing the cleaning method and time, it eliminates variations caused by manual work, supporting stable quality. Its compact design saves space, allowing for installation in various work locations. With easy automation, it reduces the burden on operators and decreases work hours, contributing to labor savings and increased productivity. 【Features】 - Timer-based cleaning time - Air-driven, no power supply needed - Equipped with a cleaning liquid discharge valve - Cleaning position adjustment function - Highly functional compact design *For more details, please refer to the PDF document or feel free to contact us.