日本サンテック List of Products and Services

This is a manufacturer with increasing shipments of cellular IoT modules. 【5G Module】 Overview: Supports 5G SA and NSA networks Sub6 compatible M.2 (30mm x 52mm x 2.3mm) JATE/TELEC certification obtained NTT/au interoperability testing (IOT) completed 【LTE Cat.4】 Supports LTE-TDD/LTE-FDD/WCDMA 3 modes 150Mbps (DL)/50Mbps (UL) *LTE-FDD LCA+LGA (32mm x 29mm x 2.4mm) Technical standards conformity certification obtained NTT/au/SoftBank interoperability testing (IOT) completed

• Communications

Nihon Santec Co., Ltd. is an authorized distributor of the wireless communication module manufacturer Fibocom. They are the second largest in the world in terms of cellular IoT module shipments (2023) and are a growing manufacturer! Products for the Japanese market are currently listed on Ipro. 【5G Module】 Supports 5G SA and NSA networks Sub6 compatible M.2 (30mm x 52mm x 2.3mm) JATE/TELEC certification obtained NTT/au interoperability testing (IOT) completed 【LTE Cat.4 Module】 Supports LTE-TDD/LTE-FDD/WCDMA 3 modes 150Mbps (DL)/50Mbps (UL) *LTE-FDD LCA+LGA (32mm x 29mm x 2.4mm) Technical standards conformity certification obtained NTT/au/SoftBank interoperability testing (IOT) completed

• Other network tools

CWDM OADM is an essential module in CWDM network systems for adding/removing channels in a ring or point-to-point line configuration. This allows different applications such as SDH/SONET, ATM, Fibre Channel, and Gigabit Ethernet to be supported simultaneously without interfering with each other. Ficer's CWDM OADM offers low loss, high isolation, and high reliability. With multiple flexible configurations, it accommodates various missions.

• Other network tools

For those involved in wireless applications, we would like to introduce you to the communication module manufacturers and antenna manufacturers that we handle.

• PBX/IP phone

If you have any requests for computer or tablet peripherals, please feel free to contact us. We also handle monitors, mice, web conference headsets, power strips, and covers.

• Other office supplies

Covers all 5G bands from 600 to 6000 MHz.

• Communications

It covers all GNSS L1/L2/L5/L6. It is very compact and lightweight, with a height of 31.5 mm and a diameter of 60 mm.

• antenna

The Taoglas GSA.8846 wideband dipole antenna is designed to cover all cellular, ISM, and Wi-Fi operating frequencies in the 450 to 6000 MHz spectrum.

• antenna

LTE antennas can be mounted on metal! Conventional cellular antennas could not be mounted on metal. However, the TAOGLAS technology team has made this possible. It consists of one GNSS antenna and two LTE MIMO antennas. For GNSS and cellular MIMO connections, a 2m TGC-1.5DS cable with an SMA(M) connector is used as standard.

• Communications

Introducing Taoglas products, an antenna manufacturer. This time, we will introduce a transparent film antenna, which is one of three types, specifically a WiFi antenna. The transparent flexible antenna can be used as an alternative to standard flexible PCB antennas when users want to install the antenna in inconspicuous locations or on surfaces.

• Communications

Taoglas Magnetics offers an extensive product line of RJ45 integrated connectors designed for commercial and industrial-grade applications, supporting 10/100 Base-T (Atmos100 series) and 1G Base-T (Atmos1000 series). These surface mount or through-hole components provide reliable performance, maintain signal integrity that meets IEEE 802.3 standards, and are UL certified. Power over Ethernet options such as PoE, PoE+, and PoE++ are also available.

• Rectangular Connector

It is ideal for access points, devices, and routers. TG.55 covers many 5G NR Sub 6GHz bands, including the new extended LTE band 71.

• Other network tools

The G041I, which combines GNSS positioning and inertial navigation technology, not only achieves high-sensitivity positioning but also enables rapid signal tracking and acquisition even in areas with poor signals (such as tunnels and underground parking lots), providing continuous and accurate positioning for navigation applications.

• Communications

Technical standards conformity certification obtained. The NTT/au interconnection test (IOT) has been completed, so you can use it safely within Japan.

• Communications

The "Centimeter-Level Standalone High-Precision GNSS Positioning System" is a system that can be utilized at a fraction of the cost compared to traditional GNSS used for surveying purposes, such as RTK and VRS. Since there is no need for communication with reference stations or electronic reference points, as long as there is a clear view of the sky, it is possible to use high-precision positioning data in real-time throughout Japan. Additionally, it is compatible with Ntrip-based VRS and RTK systems, allowing it to be used in the same manner as traditional high-precision GNSS equipment by simply switching the app settings. If you have any questions, please feel free to contact us. 【Strengths of Our System】 ■ Can be used throughout Japan with standalone high-precision positioning ■ Significantly reduces costs compared to GNSS surveying equipment ■ Easy to use due to its simple functional configuration ■ Can be adapted to traditional high-precision positioning methods *Please feel free to contact us.

• Distance measuring device

Product name: MG110-JP A compact, low-cost LTE Cat.1 communication module suitable for M2M and IoT applications.

• Communications

【Product Overview】 Product Name: FM160-JK Supports 5G SA and NSA networks, SUB6 compatible M.2 (30mm x 52mm x 2.3mm) JATE/TELEC certified 5G communication module for Japan/Korea

• Communications

Supports LTE-TDD/LTE-FDD/WCDMA 3 modes LTE FDD B1/3/8/11/18/19/21/26/28 LTE TDD B41 WCDMA B1/6/8/19 150Mbps (DL)/50Mbps (UL) *LTE-FDD LCA+LGA (32mm×29mm×2.4mm)

• Routers, Switches, and Hubs

The "Centimeter-Level Standalone High-Precision GNSS Positioning System" is a system that can be utilized at a fraction of the cost compared to traditional GNSS used for surveying purposes, such as RTK and VRS. Since it does not require communication with reference stations or electronic reference points, as long as there is a clear view of the sky, it is possible to use high-precision positioning data in real-time throughout Japan. Additionally, it is compatible with Ntrip-based VRS and RTK systems, allowing it to be used in the same manner as traditional high-precision GNSS equipment by simply switching the app settings. If you have any questions, please feel free to contact us. 【Strengths of Our System】 ■ Can be used throughout Japan with standalone high-precision positioning ■ Significantly lower cost compared to GNSS surveying equipment ■ Easy to use due to a simple functional configuration ■ Can be adapted to traditional high-precision positioning methods *Please feel free to contact us.

• Distance measuring device

**Custom Power Supply Development** We provide power supplies that meet your desired specifications, shapes, and characteristics. We aim to offer power supplies as per your requirements without the extra functions or shape constraints that are often found in standard power supplies. By adopting our unique resonant switching circuit, we can also support low-noise, high-reliability, and high-efficiency power supplies. **Custom Charger Development** We accommodate all types of battery packages and configurations (nickel-hydride batteries/lithium-ion batteries) and support safe rapid charging. Custom solutions for multi-chargers, such as 5-cell and 10-cell chargers, are also available. We can increase the number of cells as per customer requests. **Custom Secondary Batteries** We have accumulated expertise in charging lithium-ion and nickel-hydride batteries and have been selling them as a set. Lithium-ion batteries continue to develop their already excellent energy density while expanding their range of applications, and nickel-hydride batteries offer remarkable cost advantages. By utilizing the selection of components, design methods, production means, and accumulated know-how used in secondary batteries, and by giving careful consideration to charging and discharging methods and usage, secondary batteries can become the best partner for your products.

• Circuit board design and manufacturing

The "Centimeter-Level Standalone High-Precision GNSS Positioning System" is a system that can be utilized at a fraction of the cost compared to conventional GNSS used for surveying purposes, such as RTK and VRS. Since there is no need for communication with reference stations or electronic reference points, as long as there is a clear view of the sky, it is possible to use high-precision positioning data in real-time across all of Japan. Additionally, it is compatible with Ntrip-based VRS and RTK systems, allowing it to be used in the same manner as conventional high-precision GNSS equipment by simply switching the app settings. If you have any questions, please feel free to contact us. 【Strengths of Our System】 ■ Can be used throughout Japan with standalone high-precision positioning ■ Significantly lower cost compared to GNSS surveying equipment ■ Easy to use due to its simple functional configuration ■ Can adapt to conventional high-precision positioning methods *Please feel free to contact us.

• Distance measuring device

Supports a wide range of frequencies with an all-band GNSS antenna. Being a magnet type, it can be easily moved after installation. It is compatible with L6, ensuring high accuracy. With an IP67 waterproof rating, it can be used outdoors with peace of mind. Since it is all-band, it is compatible worldwide and can position with any satellite. *Note: The module must be compatible with the satellite for this to work.

• antenna

The "FSPP-HJ-T11-Y3" SFP+ copper transceiver complies with the latest SFP+ Multi-Source Agreement (MSA) specifications. Its high-performance design supports a transmission rate of 10Gbps/full duplex communication/link lengths of up to 30m using CAT6a/7 4P cables. This is designed for high-speed communication links that require 10 Gigabit Ethernet using copper cables.

• Optical Connector

Supports a wide range of frequencies with an all-band GNSS antenna. Being a magnet type, it can be easily installed and moved. It is compatible with Michibiki L6, ensuring high accuracy. With an IP67 waterproof rating, it can be safely used outdoors. Since satellite positioning requires at least four satellites, stable positioning is expected with Michibiki's future system of seven satellites. Of course, it can also receive signals from satellites like GPS and GLONASS, allowing it to receive a wide range of frequency bands with just this one device.

• antenna

If an EOL occurs and the production quantity is determined, there is an option to consolidate, but for products where the duration of continuation is not decided, it can be unclear how far to consolidate. In the long run, it is often more beneficial to revise. If you have any concerns regarding EOL, please feel free to consult with us.

• Circuit board design and manufacturing

Completion of NTT/au/SoftBank interconnection testing (IOT) Supports LTE-TDD/LTE-FDD/WCDMA 3 modes

• Communications

In traditional counting tasks, it is difficult to count parts with issues related to their unit weight (lightweight, variability) using electronic scales. We want to measure accurately according to quantity. "Mebakari-kun" has achieved efficiency in this counting task through image processing technology. Operators simply need to follow the instructions on the monitor and "spread out" the parts. They are freed from tedious counting tasks. Features: ■ Easy measurement in just 3 steps With "Mebakari-kun," you only need to place and spread the parts you want to count on the measurement platform, and the camera will automatically count the quantity through image processing. It can be easily used by on-site workers. ■ Counting based on image processing rather than weight For parts where counting with electronic scales was difficult due to issues with unit weight (lightweight, variability), "Mebakari-kun" enables counting through image processing technology, reducing the burden of meticulous counting tasks. ■ Recording counted results "Mebakari-kun" is a system that counts parts using image processing software, so the work details are logged. It has achieved traceability for counting tasks that were previously difficult. By visualizing quantities, it is possible to reduce waste such as forgetting to include items or overloading. ■ If you are considering time reduction and cost savings, please take this into consideration.

• Image analysis software

The PCS.50 is equipped with an RF switch that adjusts the antenna's resonant frequency according to the device's requirements. *Please note that the RF switch must be purchased separately. By adjusting the antenna's resonant frequency to the desired operating frequency band, the antenna can cover the entire spectrum of the 4G LTE band. This allows the device to utilize the correct frequency band required for the wireless module.

• antenna

Supports a wide range of frequencies with an all-band GNSS antenna. Being a magnetic type, it is easy to install and move. It is compatible with L6 products, ensuring high accuracy. With an IP67 waterproof rating, it can be used outdoors with peace of mind. As the number of Michibiki satellites increases in the future, it will be possible to calculate position information using only geostationary satellites. Since four or more satellites are required for satellite positioning, an environment for continuous positioning will be established as the number of satellites increases in the future.

• antenna

We handle products ranging from 12W to 250W. We also offer adapters for other industrial applications. We have a wide range of products, so we can make suggestions based on your needs.

• Other power sources

The PCS.50 is equipped with an RF switch that adjusts the antenna's resonant frequency according to the device's requirements. *Please note that the RF switch must be purchased separately. By adjusting the antenna's resonant frequency to the desired operating frequency band, the antenna can cover the entire spectrum of the 4G LTE band. This allows the device to utilize the correct frequency band required for the wireless module.

• antenna

Dustproof/waterproof performance IP67, magnet type GPS: L1/L2/L5 GLONASS: G1/G2/G3 Galileo: E1/E5a/E5b Beidou: B1/B2a/B2b QZSS: L1/L2 Cable length 1.5m RoHS & Reach

• antenna

The "FSPP-HJ-T11-Y3" SFP+ copper transceiver complies with the latest SFP+ Multi-Source Agreement (MSA) specifications. With its high-performance design, it supports a transmission rate of 10Gbps/full duplex communication/link lengths of up to 30m using CAT6a/7 4P cables. This is designed for high-speed communication links that require 10 Gigabit Ethernet using copper cables.

• Optical Connector

We propose replacements for II-VI/Finisar and BROADCOM products that have been discontinued! Our manufacturer products can be obtained relatively inexpensively compared to other manufacturers, with a short lead time (approximately 1 month). We have samples available for evaluation, so please feel free to consult with us. If you have any optical transceivers that are difficult to obtain, even if they are not discontinued, please do not hesitate to contact us. We can suggest suitable products from Ficer Technology, which offers a wide range of options from 100Mbps to 400Gbps. We can provide replacement suggestions, so if you are currently using something and are wondering if it can be replaced, please feel free to reach out to us. Our products are manufactured in a well-managed factory, and we conduct thorough quality control, so you can use them with confidence.

• Optical Connector

The FSFP-CJ-T01-X1 SFP copper transceiver complies with the current SFP Multi-Source Agreement (MSA) specifications. Its high-performance design supports a transmission rate of 1.25Gbps/full duplex communication/maximum link length of up to 100m using a 4-pair twisted pair CAT5 UTP cable. Access to the SFP serial ID information at address A0h is available via a 2-wire serial bus I2C protocol. Additionally, the PHY IC can also be accessed using a 2-wire serial bus through address ACh.

• Optical Connector

We propose replacements for the discontinued II-VI/Finisar and BROADCOM products! Our manufacturer’s products can be obtained relatively inexpensively compared to other manufacturers, with a short lead time (about 1 month). If you have any optical transceivers that are difficult to obtain, even if they are not discontinued, please feel free to consult with us. We can suggest suitable products from Ficer Technology, which offers a wide range of options from 100Mbps to 400Gbps. You can inquire whether a replacement is possible even if you are currently using this product, so please feel free to contact us. Our products are manufactured in a well-managed factory, and we conduct thorough quality control, so you can use them with confidence.

• Optical Connector

The installation of antennas on window glass and the surfaces of digital displays was traditionally considered impossible, but recent advancements have resolved this issue, making product commercialization possible. Due to its adhesive nature, installation is easy, and the feed line is terminated with a removable FAKRA connector adapter. There are three types of transparent antennas: GNSS antennas, 5G antennas, and Wi-Fi antennas. In recent years, the demand for FAKRA connectors has been increasing.

• Other network tools
• antenna
• LCD display

**Custom Power Supply Development** We provide power supplies that meet your requested specifications, shapes, and characteristics. We aim to deliver power supplies as per your requirements without the extra functions or shape constraints that are often found in standard power supplies. We can also accommodate low-noise, high-reliability, and high-efficiency power supplies by adopting our unique resonant switching circuit. **Custom Charger Development** We support batteries of all packages and configurations (nickel-metal hydride batteries/lithium-ion batteries) and offer safe rapid charging solutions. Custom solutions for multi-chargers, such as 5-cell and 10-cell chargers, are also available. **Custom Secondary Batteries** We have accumulated expertise in charging lithium-ion batteries and nickel-metal hydride batteries, and we have been selling them as a set. While lithium-ion batteries continue to develop with excellent energy density, their range of applications is expanding, and nickel-metal hydride batteries offer remarkable cost advantages. By utilizing the accumulated know-how in component selection, design methods, and production techniques for secondary batteries, and with careful consideration of charging and discharging methods and usage, secondary batteries can become the best partner for your products.

• Circuit board design and manufacturing

This product includes two high-performance antennas for use in MIMO cellular systems, covering all global cellular frequencies from 600MHz to 6GHz thanks to innovative antenna design technology, achieving stable gain and high efficiency that are typically difficult to achieve with small antennas. The magnetic design allows for easy installation, and with an IP67 rating, it can also be used externally. It can also be secured with double-sided tape. While metal is usually susceptible to radio wave interference and has been avoided in the past, this product can be installed as is due to its magnetic type. You might think that MIMO antennas are expensive, but this MA322 has reduced costs. Compared to regular MIMO antennas, it has successfully achieved significant cost advantages. If you have been hesitant to adopt due to costs, please feel free to consult with us.

• Other network tools

The FSFP-AJ-Tx1-X1 Copper SFP transceiver complies with the SFP Multi-Source Agreement (MSA) specifications. Its high-performance design supports a transmission rate of 125Mbps, full duplex communication, and a maximum link length of up to 100m using 4-pair twisted pair CAT5 UTP cables. Access to the SFP serial ID information at address A0h is available via a 2-wire serial bus I2C protocol. This 100BASE-TX Copper SFP transceiver supports SFP-based switches with 100BASE-FX ports that accept standard 100BASE-FX optics SFPs.

• Optical Connector

GNSS signals captured over a wide range! Completely waterproof with a robust housing, IP67 rated! Excellent environmental performance as well! Capable of capturing Michibiki L6 signals, it can also support standalone positioning! Ideal for applications requiring high-precision positioning, such as autonomous driving and smart agriculture! 【Features】 ■ IP67 waterproof performance ■ Compliant with RoHS & REACH ■ Screw mount

• antenna

Since it is magnet-mounted, installation is easy, and with IP67 performance, it can be used externally as well. Until now, MIMO antennas had a high image, but this MA322 has reduced costs. Compared to regular MIMO antennas, we have successfully achieved significant cost advantages. If you have given up on introducing MIMO antennas due to costs, please feel free to consult with us.

• Other network tools

We will collaborate with our partner companies that we provide. We will offer more optimal product proposals using FPGA. Since we can handle everything from circuit design to product adjustment in-house, there are no indirect costs, leading to cost reduction. We provide designs using antennas. HW development achievements: Circuit board design, artwork, mechanical design, manufacturing equipment, FPGA, ASIC/IP development. SW development achievements: SH series, ARM, DSP, PowerPC, Intel. OS development achievements: Linux, Windows, Vx-Works, Solaris. Development of high-frequency products is also possible. We deliver trust and quality!! We also have partner EMS companies, so we can support everything from development to mass production!

• Contract manufacturing
• Mechanical Design
• EMS

We would like to propose replacements for the II-VI/Finisar and BROADCOM products that have been discontinued! These manufacturer products can be obtained relatively inexpensively compared to other manufacturers, with a short delivery time (about 1 month). If you have any optical transceivers that are difficult to obtain, even if they are not discontinued, please feel free to consult with us. We can suggest suitable products from Ficer Technology, which offers a wide range of options from 100Mbps to 400Gbps. Feel free to contact us if you have any inquiries about whether the products you are currently using can be replaced.

• Optical Connector

- Supports a wide range of positioning methods including CLAS positioning, RTK positioning, and DGPS (DGNSS) positioning. - Equipped with interference wave countermeasures, multipath reduction, and high-speed satellite acquisition features. - A versatile UI accessible via a browser. - A compact and lightweight receiver with excellent portability. With CLAS positioning, an accuracy of within 10 cm is possible. *This is achievable within one minute from power-on, provided the installation position is favorable. For more details, please contact us.

• antenna