新日本通商 List of Products and Services

The small-capacity share jet HL60 V2 is an electric hydraulic high-pressure homogenizer. It can process small samples (3mL) using a unique fixed-shape diamond reaction chamber. Despite its high-pressure processing capability of up to 200MPa, it features a noise-reducing design.

• Homogenizer
• Dispersion/emulsification equipment/homogenizer
• Homogenizer

The flow rate of the seal water is displayed on a flow meter. Additionally, pressure is measured from the return (drainage) of the sealing water. Both flow rate and pressure can be output using optional sensors.

• Other pumps

The handheld moisture meter AM-III can instantly measure all types of paper and cardboard non-destructively. Even with paper rolls in the process of being wound, stacked paper, or ream paper, accurate moisture measurements can be obtained by making contact with the bottom roller of the measurement target.

• Other temperature and humidity measuring instruments

The "RoQ Roll Hardness Meter" is a device that measures the roll hardness in the width direction (with a minimum pitch of 1mm) simply by sliding it horizontally over a rolled product. Immediately after measurement, data can be instantly checked on the touch panel display on the back of the main unit. Additionally, measurement data can be exported in Excel format, making data handling easy. 【Usage Examples】 - Even for a 5m wide roll, roll hardness can be measured at 1mm pitch in about 20 to 30 seconds. - Excel data can be utilized to create reports or compile trend information. - Detection of wrinkles that occur inside the roll is also possible. *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

"Permi" is a groundbreaking process control and quality management system that allows for online permeability measurement. Machine adjustments can be made based on real-time permeability information. Additionally, if the permeability is within the standard range, stable quality can be ensured. As a result, production can occur at maximum line speed while maintaining the standard range (quality), leading to increased production. 【Features】 ■ Reduced line startup time ■ Increased line speed ■ Increased production ■ Quality stability *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "ACA AX-100" is a next-generation capillary viscometer capable of measuring viscosity at ultra-high shear rates (1,000,000 1/S). It can measure the viscosity of coating agents at shear rates that were not measurable with conventional viscometers, at levels actually used in coaters. Benefits such as improved coater operability, avoidance of coating defects due to viscosity, and cost reduction through optimization of coating agents can be expected. 【Features】 ■ Viscosity measurement/analysis at ultra-high shear rates (up to 10⁶) ■ Defect prevention with blades ■ Optimization of coating agents ■ Cost reduction * Limited to water-based materials (solvents cannot be used) * For more details, please refer to the PDF document or feel free to contact us.

• Viscometer
• Other measurement, recording and measuring instruments

To analyze the causes of coating issues, it is necessary to measure the moisture retention of the coating color. 【Typical Examples of Coating Problems】 ◆ Occurrence of dewatered cakes after the dryer part ◆ Web breaks in the coater ◆ Uneven coating thickness Preventing these occurrences in advance leads to cost reduction. Additionally, the moisture retention of the coating color affects the thickness of dewatered cakes, making it an important factor for runnability. 【Features】 ◆ Moisture retention analysis device compliant with TAPPI T-701 ◆ Measurement possible in a shorter time than conventional products ◆ Simple design with easy operation via a touch panel ◆ Equipped with pressure self-calibration function ◆ Includes Excel application for WR value analysis

• Paper and pulp
• Analytical Equipment and Devices

◼ Online moisture measurement using a multi-spectral NIR (near-infrared) sensor ◼ The sensor head is highly resistant to environmental conditions and can measure even in high temperature and humidity environments ◼ The sensor head can be installed up to 200mm away from the paper surface ◼ The sensor head and sensor unit are connected via a fiber optic cable (within 15m) ◼ Air purging prevents contamination at the sensor tip ◼ The level of contamination on the sensor head can be detected and output ◼ Settings can be configured using the dedicated software 'TriIdent-Master'

• Other measurement, recording and measuring instruments

It is now possible to measure the strength characteristics that were previously measured/predicted over time using laboratory equipment and soft sensors in real-time online. Various strength indicators can be measured every 2 seconds and visualized in trend graphs. By monitoring and optimizing strength changes due to the addition of agents in real-time, it is possible to reduce costs and stabilize quality.

• Other measurement, recording and measuring instruments
• Paper and pulp

FINBOW has been providing high-quality spreader rolls/expander rolls and services for the world's largest and fastest pulp and paper machines since 1985. This Finnish company has delivered over 3,200 rolls to 45 countries worldwide and was originally established to meet the service needs of Nordic pulp and paper mills. FINBOW's spreader rolls/expander rolls, known for their long lifespan and performance, are always optimized to meet the demands of actual operating environments. Our patented solutions are designed to ensure reliable performance in any environment, making your paper and pulp production more efficient. Since 2016, FINBOW has been a trademark of Logistic TKT Systems Oy. Logistic provides custom machine parts and components to meet the needs of the machinery, process, and energy industries.

• Paper and pulp

The fuse view sight glass is a very sturdy product that integrates glass and a metal ring. It won't break even if dropped or subjected to one-sided pressure. Additionally, it can be used in high temperatures, low temperatures, high pressure, and vacuum conditions, and it excels in corrosion resistance and wear resistance. It is FM (Factory Mutual System) approved, and material certification in accordance with ASME codes and TUV standards can be issued if necessary.

• Glass
• tank

The process camera is a system for remotely monitoring the interior of vessels such as high-pressure tanks. Since the camera and lighting are integrated, it can be installed with a single mounting nozzle. There are flange type, sanitary type, and NPT threaded types available. Additionally, there are analog cameras and Ethernet cameras. The front part uses a fuse view sight glass, making it safe for use even under high temperature and high pressure. The lighting uses a fiber optic light guide to transmit LED light. The lighting is cool light and does not transmit heat. - It has obtained various approvals for explosion-proof and pressure-resistant specifications in different countries. - There is a high-pressure type rated for 10,000 PSI (690 Bar) and a high-temperature type rated for 1,090°C. - It features a high-resolution CCD camera that can output in both Ethernet and analog formats. - There are both black and white and color cameras available. - The camera's front glass can be cleaned using jet spraying (optional).

• Color camera
• Other measurement, recording and measuring instruments
• Liquid level control/level switch

High-temperature cameras have been developed for process monitoring in high-temperature areas. All types use a fused view sight glass, which safely protects the camera's electronic circuits. Unlike other products, cooling water is not required. Additionally, while air is used for maintenance when dirt accumulates on the surface lens, in most cases, cooling air is not necessary.

• Industrial Furnace
• Color camera
• Electric furnace

⚫ Easily adaptable for paper and tissue use with interchangeable accessories ⚫ Can also be used for wet wipes ⚫ Utilizes a servo motor and high-precision ball screw ⚫ Equipped with an internal pneumatic circuit for air supply (for grip opening and closing) ⚫ Includes paper/tissue adapter, support fixture set, and accessories for wet wipes ⚫ Sample dimensions: Paper/100mmW × 180mmL, Tissue/100mmW × 50mmL ⚫ Pulley and verification and calibration kit (optional) ⚫ Automatic sample detection ⚫ Measurement speed: 0.2 to 330mm/min (variable) ⚫ Automatically returns to the starting position after measurement completion ⚫ Standard load cell: 500N (1000N and 150N types also available) ⚫ Maximum grip travel distance: 300mm ⚫ Limit switch and photoelectric cell for programming safety and overload prevention ⚫ Uses RS-232 for program management and control ⚫ USB connection for maintenance and printer ⚫ Strength resolution: 0.004% of FS, tension measured at 0.01mm ⚫ Accuracy: less than 1% between 2% and 100% of FS

• Testing Equipment and Devices

⚫ A device for measuring the length of tissue paper, roll paper, toilet paper, etc. ⚫ Settable roll width: CM01/maximum 250mm (CM01-Plus/maximum 500mm) ⚫ Adjustable to fit almost all rolls ⚫ Automatic unwinding system ⚫ Unwinding speed: adjustable ⚫ Sample drive system ⚫ Paper anti-adhesion system (using compressed air) ⚫ Digital display with paper detection by photo cell ⚫ Automatic stop function ⚫ High-speed, reliable measurement system with no operator errors ⚫ CE mark

• Testing Equipment and Devices

⚫ Printer: USB connection. Printing of measurement results and average values ⚫ PC: RS-232 port, Novilog software available ⚫ Test cycle timer function ⚫ Measurement resolution: Refer to the previous page ⚫ Measurement range: Refer to the previous page ⚫ Measurement pins: Automatic rise/fall ⚫ Descent speed: Adjustable from 1 to 11 mm/min ⚫ Pause time: Adjustable from 0 to 999.9 seconds ⚫ Calibration keystroke: Once ⚫ CE mark

• Testing Equipment and Devices

- 3 types of models: Bentzen smoothness, Bentzen/Gaerly permeability, Bentzen smoothness/permeability - Smoothness and permeability measurement by Bentzen (mm/min) - Convertible to Gaerly permeability - Color touch panel screen (7 inches) - External connections: RS-232 and USB connections - Reel profile graph - Measurement range for smoothness and permeability: 0 to 5000 ml/min - Standard test pressures: 0.74, 1.47, 2.20 kPa (continuously adjustable) - Measurement surface: Glass (installed in the device) - Built-in positioning sensor for automatic and manual testing - CE mark

• Testing Equipment and Devices

- The filling chamber and spreader cone are made of special plastic, which is robust yet lightweight. They are also mounted on a stainless steel frame. - The filling chamber has a screen plate with calibrated perforations installed at its lower end. - The filling chamber has covers on the top and bottom. The upper cover is equipped with an air valve, and measurement begins with the operation of this valve. - The spreader cone has two calibrated nozzles.

• Testing Equipment and Devices

⚫ Energy is optimized due to excellent design (power consumption 200W) ⚫ The heating system is integrated into the ruffle plate, allowing for very efficient and uniform heat transfer. It can reach a working temperature of 175°C in about 15 minutes, and the temperature can be accurately set in increments of 1°C. ⚫ AV-S: Standard model. Only A flute ⚫ AV-S-OI: Can accommodate A, B, and C flutes by exchanging the ruffle (optional) (can be changed in about 2 minutes)

• Testing Equipment and Devices

- Unger type Cobb device - Sample test area: 100 cm² - Effective for water and oil - Automatic timer alarm for start, end notification, and test completion (including battery) - Cylinder container can be inverted for better sample immersion - Manufactured to standard specifications - Integrated pressure roll with a mass of 10±0.5Kg, standard specification - Glass container bottom for better observation of liquid absorption - Durable stainless steel construction - Cutting template and pad for easy sample preparation (standard supply) - CE mark

• Testing Equipment and Devices

⚫ No impact from manually moving the sample due to fully automatic measurement ⚫ Large touch panel screen ⚫ Statistical data: graphs, averages, deviations, maximum values, minimum values, etc. ⚫ Volume: adjustable in 3 stages (1/1 [380 ml], 1/10 [38 ml], and 1/20 [19 ml]) ⚫ Built-in 10kg weight ⚫ Measurement accuracy: 0.01 seconds ⚫ Displays estimated measurement value 10 seconds after test start ⚫ Selectable measurement ranges: 50.7 ~ 48 kPa & 50.7 ~ 29.3 kPa ⚫ Measurement area: 10 cm² ⚫ Automatic test or manual test ⚫ RS-232 interface for connection to management and control programs ⚫ USB port for maintenance and printer connection ⚫ CE mark

• Testing Equipment and Devices

⚫ High rigidity steel and aluminum frame ⚫ Equipped with a 500N load cell to measure values up to 33.33kN/m ⚫ The grip section moves linearly in a straight motion ⚫ Grip spacing can be adjusted to 0.7mm or 0.3mm (for thin paper) ⚫ Sample width: 15mm ⚫ Test and automatic return speed: 3±1mm/min ⚫ Short span value (SSV): kN/m ⚫ SCT curve, SCT value, and SCT index ⚫ Pressure index in Nm/g units ⚫ Height adjustable for flat installation of the device ⚫ CE mark ⚫ Security: Overload protection electronically and physically ⚫ Interface: Connection with RS-232, management program, and control program ⚫ USB connection: For printer and maintenance ⚫ FS: Resolution 0.004% ⚫ Stretch measurement value: Resolution 0.01mm ⚫ Accuracy: Less than 1% error when force is applied in the range of 10% to 100% of FS

• Testing Equipment and Devices

⚫ Microprocessor control ⚫ Control panel with full-color touchscreen and auxiliary buttons ⚫ Measurement range selection: ft.lb/sq.in, mJ/sq.in, J/m2 (statistical functions over 20) ⚫ Three measurement ranges with interchangeable pendulums ⚫ Reading resolution of 0.001 ft.lb (error less than 1%) ⚫ Steel robust frame designed to avoid energy loss during testing ⚫ CE mark ⚫ Automatic calibration function ⚫ Automatic pendulum release ⚫ Pneumatic fixation of sample holder ⚫ Interface: RS-232, USB

• Testing Equipment and Devices

- Fully automatic sample preparation - Solid aluminum and steel frame - No need to use a cutter - Automatic cutting with 6 blades. Digital selection of the number of cuts based on paper thickness - Pressure is applied to each block through 5 independent pneumatic cylinders, ensuring the same pressure within each block - Microprocessor controlled - Control panel with 4 buttons and LCD display - Easy and intuitive operation of the control menu - Selectable pressure units: N or psi - Programmable pressure time - Easy operation and cleaning - Integrated angle supports the frame - Angle support frame allows for easy assembly/disassembly to facilitate blade cleaning - Cutting blades can be quickly assembled/disassembled for easy cleaning/replacement - Two roll tape dispensers for rapid simultaneous application of tape to both sides of the sample - The IBP-5A sample preparation station is adaptable to all types of bond tester equipment

• Testing Equipment and Devices

⚫ The clamp allows for easy switching between tests for paper and cardboard by changing the membrane and adjusting the settings. ⚫ Frame material: High rigidity steel/aluminum frame ⚫ Drive unit: Servo motor and high precision ball screw ⚫ Emergency push button ⚫ Protective cover: Safety feature (stops the clamp descent when the protective cover is in the wrong position) ⚫ Maximum sample thickness: 12mm ⚫ Legs: Adjustable for leveling the device ⚫ Measurement range: 0–5,000kPa (EM-50) and 0–8,000kPa (EM-80) ⚫ Accuracy: 1% between 2% and 100% of FS ⚫ Pumping speed: Paper - 96±6ml/min, Cardboard - 170±5ml/min ⚫ Air pressure regulator: Adjustable sample holding force up to 7,000N ⚫ RS-232: For connection to management and control programs ⚫ USB: For printer connection and maintenance ⚫ CE mark

• Testing Equipment and Devices

⚫ Easy operation ⚫ Programmable with 2 press cycles ⚫ Robust structure made of non-corrosive materials ⚫ Four pneumatic cylinders for uniform pressure distribution ⚫ Drainage at the back ⚫ Press area 350 × 350mm ⚫ Maximum pressing force: 18500N at 6bar air supply ⚫ Maximum pressing force: 24250N at 8bar air supply

• Testing Equipment and Devices

Paper, cardboard, paper tubes, and other strength tests are possible. By replacing the sample holder (optional), tests such as RCT, CMT, ECT, CCT, FCT, and PAT can be conducted. It features a sturdy frame made of steel and aluminum. It is driven by a servo motor and high-precision ball screws. The level of the main unit can be adjusted with screws at the bottom. It includes an emergency stop button and has a CE mark. Measurement range: 0 to 5,000 N. Test range: 140 mm. Pressure plate: 150 mm x 150 mm. Test speed: 1 to 150 mm/min. Safety measures: overload detection via program and limit switch. Type B: connection to management control program via USB. Maintenance and USB for printer. It measures the applied pressure with an accuracy of 0.004% FS and elongation with an accuracy of 0.01 mm. Accuracy: less than 1% of the applied force in the range of 2 to 100% FS.

• Testing Equipment and Devices

⚫ Air pressure clamp, automatic cutting of samples ⚫ After the test is completed, the pendulum automatically returns ⚫ Measurement values: Tear resistance (mN), Tear resistance (%), and Tear rate (mN.m²/g) ⚫ Usable pendulum range: 4000mN, 8000mN, 16000mN, 32000mN ⚫ Output: RS232, USB ⚫ CE mark

• Testing Equipment and Devices

⚫ Material: Roll, housing, and machine body are made of stainless steel ⚫ Capable of refining pulp from 5 to 40g at a concentration of 5 to 50% (maximum 450ml in suspension) ⚫ Easy to operate and has a low pulp quantity (30g), making it highly versatile ⚫ Very high reproducibility, effective for quality control and research ⚫ Equipped with security features for machine and operator protection (CE mark) ⚫ Roll: Automatically raises and lowers ⚫ Adjusts pressure based on load weight ⚫ Roll rotation speed: Pre-set ⚫ The roll head moves to the operational position at the start due to air pressure and returns to the resting position after refining is complete. All actions are automatic until the motor is turned off, so the operator does not need to monitor constantly ⚫ During the refining process, calculates time, power absorption in watts (continuous measurement), and energy consumption in kilowatts per hour ⚫ Distance screw to adjust the gap between the roll and housing during the grinding process ⚫ Complete drainage system for sample collection after testing ⚫ All controls are consolidated on a comprehensive control panel

• Testing Equipment and Devices

⚫ Digital display (resolution 0.01mm) ⚫ Measurement range: up to 25mm ⚫ Measurement head 10±0.2 ㎠n ⚫ Lifting mechanism for measurement head: action lever (Code: 010106) pneumatic switch (Code: 010108) ⚫ Measurement pressure: 2±0.1 Kpa ⚫ Descent speed adjustment range for measurement head: 2~3mm/s

• Testing Equipment and Devices