ジャパンロボテック List of Products and Services

A programming robot creation kit for a 3-wheel drive that performs autonomous driving, lateral movement, circular motion, and circumferential movement. It includes a curriculum guide that teaches the basics of control through a beagle-type line tracing, evolves it, and uses knowledge of kinematics and mathematics to create a robot that moves freely in all directions with omnidirectional movement. [(Program Control) (Algorithm) (Activity) (Kinematic Model Control) Control rules: Proportional Control, Trajectory Control (Odometry), (PID Control)]

• others

Analog input 5/I2C/PING/DC motor 2/Servo terminal 9/Brightness sensor/Sound sensor/Slider equipped Control possible from smartphone/PS4 controller via Bluetooth communication

• Printed Circuit Board

- Operates at a voltage of 3 to 9V, gear ratio is 1:48, 90 RPM (90 rotations per minute) at 4.5V. - The Hall sensor can detect the N and S poles of the magnetic plate.

• DC Motor
• DC Motor

You can program with your preferred microcontroller board to achieve autonomous driving in 360 degrees (all directions). In addition to moving forward and backward, you can also realize: - Translational motion (moving in any direction) without changing the orientation of the vehicle, - Circular motion that moves in a circular path, - Arc motion that moves while facing the center of the circle, among others.

• DC Motor
• DC Motor

The "Omuni-directional RDS-4WD55" is a two-way robot developed as a practical teaching material for learning program control, algorithms, activities, and kinematic model control, capable of omnidirectional movement and autonomous navigation. It is equipped with two types of sensors: modulated infrared sensors and infrared reflection sensors. Additionally, the curriculum guide includes a comprehensive program that teaches the basics of control through line tracing using a vehicle, evolves from there, and allows for the creation of a robot that can move freely in all directions using knowledge of kinematics and mathematics. 【Features】 ■ Challenge advanced programming ■ Programs created with blocks are automatically converted to C language during microcontroller writing ■ Programs can be used in two modes, allowing for preference-based selection ■ Equipped with two types of wheels for autonomous and omnidirectional movement, which are interchangeable ■ High torque and durable metal-geared motors *For more details, please refer to the PDF materials or feel free to contact us.

• others

The rescue line robot "RDS-TEC36 2WD Rescue" is an expanded model equipped with infrared sensors and floor contact sensors suitable for rescue competitions, along with a servo-operated basket. After practicing with the sample, you can further evolve the robot freely by changing the component layout and programming. 【Set Contents】 ■ Controller: RDC-104 ■ Included Sensors: Ultrasonic Sensor HC-SR04, Infrared Sensors JES-7023VAD ×2, Components for Contact Sensors ■ Parts: Honeycomb Plate, Gearbox/Tire Set RDO-502 ×2, Casters ×2, Servo + Bracket, Basket Components, AA Battery Holder for 4 Batteries ■ Others: Storage Case, Micro USB Cable, Development Environment CD-ROM *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Printed Circuit Board

The challenge robot "RDS-TEC34" is a dribbler suitable for soccer competitions and is an extended model featuring infrared distance sensors. The robot is lightweight due to the use of honeycomb plates in its structural materials (body weight 640g, including battery 990g). Additionally, all models are equipped with sound sensors, brightness sensors, acceleration/gyro sensors, and sliders, which can be utilized for various controls. 【Product Overview】 ■ Identifies the white line marked on the field of the competition arena and operates without going outside the line. ■ Captures actions targeting a ball that emits modulated infrared light. ■ Dribbles the target (ball) and acts accordingly, etc. *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Printed Circuit Board

The "RDS-X04" is a wired control robot manufacturing basic set equipped with a power ON/OFF switch and forward/reverse switching for four systems, as well as a switch to change the output voltage between DC1.5V and DC3V. By adding and expanding motors, gearboxes, and various other mechanisms to the universal plate, it is possible to create a wide variety of robots. Through hands-on learning with the actual device, users can gain a good understanding of the relationship between robot movement and control, allowing for a smooth transition to autonomous robots. 【Set Contents】 ■ Parts ・Universal Plate ・Gearbox/Tire Set ・Caster ・Remote Control Box *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Printed Circuit Board

The PID control robot 'RDS-X25zero' is a model that uses a gearbox with an encoder. The guide PDF allows you to read and count the output from the motor with an encoder, and you can experiment with a sample program that applies PID control to ensure straight movement even with individual differences in the motors. Additionally, all models are equipped with a sound sensor, brightness sensor, and slider, enabling various control options. An accelerometer/gyroscope sensor can also be added. 【Set Contents】 ■ Controller: RDC-103 Zero (without accelerometer/gyroscope sensor) ■ Included Sensor: Ultrasonic Sensor HC-SR04 ■ Parts: Universal chassis plate, battery box for 4 AA batteries, encoder-equipped gearbox/tire set RDO-502EN, caster ■ Others: Storage case, micro USB cable, development environment CD-ROM *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Printed Circuit Board

The Rover Autonomous Set "RDS-X21" is a basic set for building a two-wheel drive robot. It allows for an understanding of the relationship between robot movement and programming control, enabling the learning of the fundamentals of autonomous robot construction. Additionally, the chassis can be used as a base for constructing various robots with a universal plate featuring 3.5mm holes on a 7mm pitch. 【Set Contents】 ■ Controller: RDC-104 ■ Included Sensor: Reflective Infrared Sensor RDI-TCRT5000A ■ Parts: Universal Plate RDP-801, Gearbox/Tire Set RDO-502, Caster, Battery Box with Switch for 4 AA Batteries, Cables ■ Others: Storage Case, Micro USB Cable *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Printed Circuit Board

The automatic cultivation factory "RDS-E20" is a product that can be used with hydroponic planters of about 12 cm square, contributing to safe and secure plant growth. It allows for the control of LED lights through programming, making it suitable for biological cultivation, programming (information), and measurement and control elements for learning/experimentation. Additionally, it enables various automated control experiments, such as individually controlling the three primary colors of LEDs (red/green/blue) to change the emitted color, adjusting brightness based on the value of a brightness sensor, and turning the LEDs on/off according to time. 【Parts List】 ■ Automatic cultivation factory RDS-E20 board x 1 ■ Plastic cover x 1 ■ AC adapter 6V x 2 ■ Micro USB cable RDP-824 x 1 ■ Program development environment IDE & Guide x 1 *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Printed Circuit Board

The "Small Bot" is a small robot that can be programmed with Arduino and operated directly on your desk. Even with the pre-installed program at the time of shipment, it can respond to the distance to walls and obstacles using the ultrasonic distance sensor on top, start and stop with the sound of clapping, and try line tracing with the brightness sensor on the bottom. Additionally, the controller board is an Arduino-compatible RDC, so you can freely program it using Arduino. 【Product Overview】 ■ Arduino-compatible microcontroller board RDC (104 TYPE Zero) ■ Sound sensor / brightness sensor / ultrasonic distance sensor / slider ■ 2 DC motor outputs ■ 2 servo motor outputs (shared with digital input/output terminals) ■ USB cable included (for program transfer) *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Printed Circuit Board

The "Pencil Programmer" is a measurement, control, and programming educational tool that can control two inputs and two outputs with 4-bit instruction codes. It allows you to control two inputs, "Button (resistor sensor)" and "Brightness sensor," and two outputs, "LED" and "output terminals" that can be connected to motors or light bulbs, simply by writing a program with a pencil. Additionally, by connecting a motor to the output, you can control the movement of your creations or build autonomous robots. It can be maximally utilized in combination with science experiment components like small light bulbs and toy cars. 【Features】 - The program has 14 steps, and by connecting two boards with jumper cables, it is possible to execute 28 steps. - Being Arduino-compatible, you can connect it to a computer with a separately sold USB cable and program it using Arduino. - The "Pencil Programmer with Battery Box" can be used immediately by simply inserting batteries and connecting with a connector, among other features. *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Other electronic parts
• Printed Circuit Board

The RDC-104 is a measurement and control microcontroller board equipped with four sensors and LEDs for light, sound, slider, and button on all models. It has a 3-pin header for analog input and an I2C socket for connecting additional sensors, making it easy to measure the resistance of various items. A set of terminals for alligator clips is also provided. 【Features】 ■ Four sensors equipped on the board ■ Diverse input ports ■ Motor driver ■ Servo pins *For more details, please download the PDF or feel free to contact us.

• Embedded Board Computers
• Other electronic parts

The "RDC-103" is a measurement and control controller compatible with Arduino/SensorBoard. It is equipped with six sensors and LEDs, allowing for immediate experimentation with just the board and a computer. It can easily measure the resistance of various objects, and when combined with a breadboard cover, it enables experiments with commercially available sensors and electronic components. It is ideal for beginners. 【Features】 ○ Equipped with six sensors ○ Various input ports ○ Motor driver included ○ Servo pins included For more details, please contact us or download the catalog.

• controller