日本エリーズマグネチックス Product Lineup

The SafeHold lifting magnet is a high-performance, highly reliable permanent magnet lifting magnet proudly manufactured by Eriez Manufacturing. It does not require a power source, eliminating the risk of dropping during power outages, making it highly regarded in environments where safety is the top priority. It is capable of handling a wide range of workpieces, including flat steel, steel plates, round steel, steel pipes, and castings. It exhibits a high holding force of up to 7,500 lbs (approximately 3.4 tons), providing stable adhesion from thin plates to thick plates and round materials. Additionally, its highly operable handle mechanism and ASME B30.20 compliant design based on load conditions ensure safe and reliable lifting operations. RPL Series: General-purpose, rare earth type. A versatile model applicable to both flat plates and round materials. XPL Series: General-purpose, rare earth type. A model optimized for round materials. APL Series: Flat plate exclusive, ferrite type. Achieves complete hands-free operation through a hoist interlocking mechanism. EPL Series: Large flat plate exclusive, ferrite type. Offers industry-leading capacity at a low cost. SafeHold is a powerful magnetic transport solution that strongly supports labor-saving and efficiency improvements on-site.

• Other conveying machines

For antique dealers, authenticity appraisal is a very important task. The accuracy of the appraisal directly affects sales and customer trust. Especially in the assessment of metal products and artworks, identifying the materials is essential. However, traditional appraisal methods are time-consuming and require specialized knowledge. The Sciaps XRF handheld analyzer addresses these challenges. Measurements can be completed in as little as a few seconds, and it can measure elements like Mg and Al, similar to high-end devices. This enables rapid and accurate assessments, significantly improving operational efficiency. 【Use Cases】 - Authenticity appraisal of metal products - Material analysis of artworks - Measurement of precious metal content - Calculation of purchase prices 【Effects of Implementation】 - Reduction in appraisal time - Improvement in appraisal accuracy - Gaining customer trust - Significant enhancement of operational efficiency

• X-ray fluorescence analyzer

In the pharmaceutical industry, ensuring product quality control and safety is the top priority. In particular, the analysis of raw material components is a crucial process that affects the efficacy and safety of products. Traditional analytical methods have faced challenges due to time and labor intensity, making rapid responses difficult. The Sciaps XRF handheld analyzer enables rapid and accurate analysis of pharmaceutical components, contributing to the efficiency of quality control. 【Use Cases】 - Incoming inspection of pharmaceutical raw materials - Component analysis of intermediate products during the manufacturing process - Quality inspection of final products 【Effects of Implementation】 - Increased efficiency in quality control through rapid analysis - Assurance of raw material quality - Improved product safety

• X-ray fluorescence analyzer

In the food industry, foreign object contamination is a major challenge in quality control. Foreign object contamination can lead to consumer health issues and a loss of trust in companies. Therefore, rapid and accurate identification of foreign objects is required. The Sciaps XRF handheld analyzer quickly analyzes foreign objects in food and assists in identifying the cause of contamination. 【Usage Scenarios】 - Detection of foreign objects on the production line - Incoming inspection of raw materials - Quality control of products 【Benefits of Implementation】 - Reduction of foreign object contamination risks - Increased productivity through rapid cause investigation - Enhanced corporate reliability

• X-ray fluorescence analyzer

In the aerospace industry, quality control of materials is extremely important. In particular, component analysis of metal materials is essential to achieve both lightweight and high strength. The use of inappropriate materials can have serious implications for the safety and performance of products. The Sciaps XRF handheld analyzer meets the needs for material analysis in the aerospace field. 【Application Scenarios】 * Material verification in manufacturing sites * Material evaluation in research and development * Inspection in quality control departments 【Benefits of Implementation】 * Increased efficiency in quality control through rapid component analysis * Improved safety by preventing the misuse of materials * Cost reduction and increased productivity

• X-ray fluorescence analyzer

In the petrochemical industry, rapid and accurate elemental analysis is required for product quality control and process management. Particularly, delays in analysis during raw material composition analysis or product quality evaluation can lead to decreased production efficiency and quality issues. The Sciaps XRF handheld analyzer enables quick analysis on-site, addressing these challenges. 【Usage Scenarios】 - Incoming inspection of raw materials - Analysis of intermediate products in the manufacturing process - Quality control of final products - Foreign substance analysis within the plant 【Benefits of Implementation】 - Reduced analysis time - Improved quality control - Enhanced process management efficiency - Cost reduction

• X-ray fluorescence analyzer

In the field of environmental surveys, it is essential to quickly and accurately identify pollutants such as soil and water quality contaminants. Traditional analytical methods have posed challenges due to the time and cost involved. The Sciaps XRF handheld analyzer can measure pollutants on-site in as little as a few seconds. This contributes to reducing survey time and costs. 【Application Scenarios】 - Soil contamination surveys - Water quality contamination surveys - Waste analysis - Identification of hazardous substances 【Effects of Implementation】 - Shortened survey periods due to rapid analysis - Accelerated decision-making through immediate on-site analysis - Increased reliability through high-precision analysis

• X-ray fluorescence analyzer

In the field of archaeology, there is a demand for the rapid and non-destructive analysis of the materials and compositions of artifacts. Especially in the preservation and study of valuable cultural properties, obtaining accurate information without damaging samples is extremely important. The Sciaps handheld XRF analyzer is portable and enables quick analysis in the field. This enhances the efficiency of investigations and allows for more detailed analyses. 【Usage Scenarios】 - Analysis at excavation sites - Appraisal of cultural properties in museums - Sample analysis in research institutions 【Benefits of Implementation】 - Preservation of cultural properties through non-destructive analysis - Reduction of investigation time through rapid analysis - Acquisition of detailed information through simultaneous analysis of various elements

• X-ray fluorescence analyzer

In quality control within the manufacturing industry, material composition analysis is crucial for ensuring product reliability. In particular, the analysis of the composition of metal materials and alloys significantly affects the strength and durability of products. Traditional analytical methods have posed challenges due to time and cost constraints. The Sciaps XRF handheld analyzer achieves lightweight, high-speed, and high-performance capabilities, enabling rapid composition analysis on the manufacturing floor. 【Application Scenarios】 - Incoming inspection of metal parts - Verification of materials in the manufacturing process - Quality control of products - Early detection of foreign matter contamination 【Benefits of Implementation】 - Increased efficiency in quality control through rapid analysis - Reduction in the rate of defective products - Cost savings - Improved traceability

• X-ray fluorescence analyzer

In mining exploration activities, rapid and accurate elemental analysis is required. In particular, real-time analysis on-site is essential for the early discovery of resources and the formulation of efficient mining plans. Traditional analytical methods have posed challenges due to time and cost. The Sciaps XRF handheld analyzer addresses these issues. 【Use Cases】 - Identification of ore deposits - Analysis of mineral composition - Rapid elemental analysis at drilling sites 【Benefits of Implementation】 - Reduced analysis time - Cost savings - Increased efficiency in resource exploration

• X-ray fluorescence analyzer

In the metal recycling industry, accurate composition analysis of scrap and rapid sorting are required. The contamination of different metals can lead to a decline in product quality and hinder the efficiency of recycling. The Sciaps XRF handheld analyzer is lightweight, fast, and high-performance, enabling quick composition analysis on-site. This contributes to the efficiency of sorting operations and the realization of a higher quality recycling process. 【Usage Scenarios】 - Metal type identification at scrap yards - Quality control on sorting lines - Composition verification during incoming inspections 【Benefits of Implementation】 - Reduction in sorting time through rapid composition analysis - Decrease in the risk of foreign material contamination - Increased efficiency of the recycling process

• X-ray fluorescence analyzer

Light! 1.5kg including the battery Fast! Measurement completed in just a few seconds High precision! Can measure Mg and Al just like high-end models Limited campaign running until 2025!

• X-ray fluorescence analyzer

The industrial magnetic product "Rare Earth Great Magnet" from Japan Eliz is often introduced for the purpose of removing foreign substances from raw materials. It is a simple machine with a proven track record and significant expected effects. Equipped with multiple powerful magnets using rare earth magnets, it efficiently removes foreign substances that inevitably mix with raw materials and products, such as iron fragments, rust, and stainless steel wear powder. We will design and manufacture it specifically for your production line. We can deliver it with connection shapes, performance, and usability tailored perfectly to your specifications. We offer a variety of options to suit your usage environment, including acid resistance, alkali resistance, heat resistance, adhesion prevention, ease of cleaning, and automation. Please feel free to discuss the situation and challenges of your production line with our representative. We will generously provide proposals based on our expertise and technology. Consultations via LINE are also available. https://lin.ee/YVjvk5v

• magnet

We would like to introduce a case where industrial rod magnets, "Rare Earth Tube Magnets," were implemented to remove wear powder in the downstream of a crusher. Before implementation, there were issues such as "wear powder from the crusher blades contaminating the product, causing troubles." In response, we proposed the installation of magnets shaped to fit the dimensions of the discharge opening at the downstream of the crusher. As a result, the wear powder was almost completely removed, and troubles were significantly reduced. If you are a person in charge who can use this for such applications or would like to try it, please feel free to consult us. 【Overview】 ■Challenges - Wear powder from the crusher blades contaminating the product, causing troubles ■Results - Wear powder was almost completely removed, and troubles were significantly reduced *For more details, please refer to the PDF materials or feel free to contact us.

• magnet

We would like to introduce a case where industrial bar magnets, "Rare Earth Tube Magnets," were implemented to remove lithium-ion batteries from the container recycling processing line. Before the implementation, there was a challenge of "lithium-ion batteries contaminating the container recycling, leading to the risk of fire." In response, we proposed the installation of low-cost magnets, which significantly reduced the risk of fire occurrence. If you are a person in charge who is interested in using or would like to try such applications, please feel free to consult with us. 【Overview】 ■Challenge - Lithium-ion batteries contaminating the container recycling, leading to the risk of fire. ■Results - Significantly reduced risk of fire occurrence. *For more details, please refer to the PDF materials or feel free to contact us.

• magnet

We would like to introduce a case where the industrial rod magnet "Rare Earth Tube Magnet" was implemented for the removal of iron foreign objects on a manual sorting conveyor. Before the implementation, there were challenges such as "iron foreign objects cannot be visually identified," "small items cannot be picked up," and "sharp objects mixed in pose a danger" on the waste manual sorting conveyor. We proposed equipping workers with tube magnets to attract iron foreign objects. As a result, the removal rate of iron foreign objects increased. If you are a person in charge who can use or would like to try this application, please feel free to consult with us. 【Overview】 ■Challenges - Iron foreign objects cannot be visually identified - Small items cannot be picked up - Sharp objects mixed in pose a danger ■Results - Increased removal rate of iron foreign objects *For more details, please refer to the PDF materials or feel free to contact us.

• magnet

The "Rare Earth Tube Magnet" is a highly magnetic industrial rod magnet. We offer ultra-powerful magnets that exceed 1.6 Tesla, combining excellent handling that allows for easy manual use with a low cost of several tens of thousands of yen per unit, which has earned us over 30 years of patronage. We manufacture according to your needs with various options such as water resistance, oil resistance, heat resistance, wear resistance, adhesion prevention, corrosion prevention, and more. If you are a representative interested in using or trying out such applications, please feel free to consult us. 【Features】 ■ High magnetic industrial rod magnet ■ Lineup includes ultra-powerful magnets exceeding 1.6 Tesla ■ Excellent handling for manual use ■ Options for water resistance, oil resistance, heat resistance, wear resistance, adhesion prevention, corrosion prevention, and more ■ High performance, high workability, and high cost-effectiveness *For more details, please refer to the PDF document or feel free to contact us.

• magnet

The "Rare Earth Tube Magnet" is a type of industrial permanent magnet that is among the strongest available on the market. Custom manufacturing is possible from just one piece according to your specifications. Depending on the options, it can be adapted for wear, corrosion, adhesion, high temperatures, sanitary conditions, liquid environments, and various other requirements. 【Examples of Applications】 ■ Removal of lithium-ion batteries from waste plastics ■ Removal of stainless steel wear powder from chemical raw materials ■ Measures against workpiece adhesion to conveyor mesh belts *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Rare Earth Tube Magnet" is a powerful type of industrial permanent magnet among commercially available products. Custom orders can be made from just one piece according to your specifications. Depending on the options, it can be adapted to various conditions such as wear, corrosion, adhesion, high temperatures, sanitary requirements, in liquids, and more. 【Features】 ■ Simple and powerful magnetic foreign object removal device ■ Easy to test with a budget-friendly cost ■ Options that cater to specific needs *For more details, please refer to the PDF document or feel free to contact us.

• others

The "X-500 Series" is a handheld fluorescent X-ray analyzer (XRF) capable of identifying magnesium (Mg) in aluminum alloys within 2 seconds. It is powered by a detachable Li-ion battery, with a runtime of 4 hours (charging time of 3 hours). It features a password lock and an X-ray emission warning lamp. 【Features】 ■ Identifies Mg in aluminum alloys within 2 seconds ■ Identifies 0.1% Si in alloys within 6 seconds ■ Capable of measuring in narrow spaces compared to conventional devices ■ Main detectable elements: - Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The "Z-900 Series" is a new handheld analyzer capable of measuring carbon. In addition to pre-treatment of the sample surface using grinders, the built-in pre-burn function removes surface contaminants from the sample. It uses high-purity argon gas and can irradiate a spot of approximately 50μm. 【Features】 ■ Measurement of pipe ends is also possible ■ Argon gas flushing using proprietary patented technology ■ Uses high-purity argon gas ■ Multi-point analysis in narrow areas is possible (6 locations) ■ Can irradiate a spot of approximately 50μm *For more details, please refer to the PDF document or feel free to contact us.

• Spectroscopic Analysis Equipment

This product is a sorter that identifies and automatically sorts 14 types of shape data obtained from the weight of objects and a laser 3D measuring device using unique computational processing. Thanks to the learning effects of neural networks, it is possible to maintain and improve identification accuracy. It can detect differences in 3D shape and apparent density, allowing for the sorting of aluminum extrusions and aluminum castings with over 90% accuracy. 【Features】 ■ Detects differences in 3D shape and apparent density ■ Not affected by the paint or dirt on the surface of the scrap ■ Capable of high-speed processing (sorting up to approximately 100 pieces of scrap per minute) ■ Various applications are possible through database construction according to purpose *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic sorting machine

The drum separator is the most suitable product for extracting iron from various raw materials and powders. It can effectively perform magnetic separation from large iron pieces to fine iron powder. The permanent magnet mechanism used inside the drum employs magnets with particularly high coercivity, ensuring exceptional magnetic durability that withstands years of use with minimal demagnetization. 【Features】 ■ Powerful magnetic force ■ Magnetic pole configuration with very few missed captures ■ Design that flexibly responds to site conditions *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

At Eliz Company, based on years of experience and a wealth of delivery achievements, we have improved the HIW wet high-intensity magnetic separator and completed a series of advanced models with higher magnetic intensity, greater processing capacity, and lower power consumption. Please utilize Eliz's technology for the precise purification of various ceramic raw materials, fine ceramic materials, the selection of weakly magnetic minerals, and the separation of ultrafine strong magnetic materials. 【Features】 ■ High separation field strength ■ Low power consumption ■ Large processing capacity ■ Continuous processing that stabilizes separation performance ■ Reliable maintenance-free operation *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic sorting machine

This product is a mechanical metal detector and sorter that demonstrates high performance. It separates non-ferrous metals (NF) from the waste car shredder residue (ECS residue) after sorting with an eddy current separator. No air is required, and it does not need a compressor for operation. 【Features】 - Separates and recovers stainless steel from non-ferrous metals (NF) - Clean sorting with an electric paddle - Double-zone sorting - Separates NF from ECS residue on the right side and recovers stainless steel from NF on the left side - The sorter can accommodate widths up to 128 inches (3.25 m) depending on processing volume - No worries about air: no maintenance required for air *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a super high magnetic force type roll separator that uses rare earth magnets. It demonstrates reliable separation effects for coarse raw materials and low magnetic susceptibility materials (minerals) that conventional dry magnetic separators could not process adequately. As a coarse separator before fine grinding, it contributes to improving the purity of raw materials for high-performance materials. 【Features】 ■ Multi-stage processing possible with a single unit ■ No restrictions on mineral size ■ Raw materials do not come into contact with the magnetic roll ■ Compact design with a small installation area ■ Uniform feeding with an electromagnetic vibrating feeder *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is an automatic metal sorting and recovery system that incorporates multiple stages of eddy current non-ferrous metal separators and airless metal sorters, along with suspended magnetic separators. It is a metal sorter that does not require a compressor, contributing to energy savings and low maintenance. It automatically sorts and recovers iron, aluminum, other metals, and non-metals all at once. 【Features】 - Uses an eccentric rotor - Capable of sorting and recovering four types - Space-saving due to multi-stage sorting machines - Sorts other metals and non-metals with the airless metal sorter - Achieves energy savings and low maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

The product is the Eliz permanent magnet ferrous trap, which efficiently removes ferrous contaminants from liquids such as slurries passing through wet pipeline inlines. It effectively removes ferrous contamination generated in raw materials or production processes in wet factory inlines, making it useful for quality control in various industries. The tube magnet's magnetic force and detailed specifications will be designed and manufactured as needed, so please feel free to consult us first. 【Features】 ■ Simple structure, ready for use immediately after installation ■ Designed and manufactured to fit customer connections such as hygienic or threaded connections ■ Capable of accommodating customer requests for sanitary specifications, high-temperature specifications, and pressure-resistant specifications ■ Stainless steel body, suitable for use in various industries such as food and pharmaceuticals *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

The "Pocket Air Table" is a desktop dry density separator that enables high-precision sorting tests with just a small sample of 200cc. With only 200cc of sample and a short testing time, it can determine the optimal separation efficiency and demonstrates sorting accuracy comparable to bench-scale testing machines, offering a new proposal for precise sorting test specifications. Thanks to its continuous recovery feature, traditional sorting tests can also be conducted as before. 【Features】 ■ Desktop testing machine with a deck area smaller than A4 size ■ Continuous recovery feature allows for traditional sorting tests ■ Adoption of a unique domestically produced special screen is expected to provide higher sorting efficiency than conventional models ■ Model with quantitative supply feeder and frame *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

This product offers various models designed to achieve high magnetic separation effects tailored to specific magnetic separation purposes, taking into account magnetic field strength, pole arrangement, and tank design. It is particularly characterized by the very rapid adsorption speed of magnetic mineral particles onto the magnetic drum. Additionally, the magnetically attracted mineral particles undergo a reverse inverted motion while being sufficiently agitated in the tank, allowing for effective separation of non-magnetic mineral particles and impurities that are being carried along, resulting in the production of high-grade concentrates. 【Features】 ■ High-grade concentrates can be obtained ■ Large processing capacity and high actual yield ■ Can be used semi-permanently ■ Easy adjustment of tank water level and overflow amount ■ Low installation, operating, and maintenance costs, making it economical *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic sorting machine

This product is a hybrid separator that efficiently sorts and recovers electronic components peeled off and collected from waste printed circuit boards, while also performing magnetic separation. It features a simple design with a suspended magnetic separator attached to an inclined belt conveyor. It sorts and recovers cylindrical aluminum electrolytic capacitors by utilizing differences in shape, and recovers magnets, iron cores, and quartz oscillators through magnetic separation. 【Features】 - The newly adopted swing gate on the belt conveyor ensures reliable rolling recovery of cylindrical particles. - A weak uniform magnetic field of 0.01 to 0.07 Tesla accurately recovers only ferromagnetic materials with high iron content. - The conditions for shape sorting and magnetic separation can be freely adjusted according to the purpose. - In addition to electronic components, it can be applied in various scenarios. *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic sorting machine

This product is a separator that utilizes the differences in the dielectric constant of minerals to perform sorting. By utilizing both the lifting effect and the adhesion effect through high voltage (high tension) and electrostatic induction, sorting performance can be achieved. It features a flexible design that allows for cost reduction through simplification of the flow sheet and minimization of installation area in the plant layout. 【Features】 ■ Highly reliable power control panel ■ In addition to standard electrodes for high tension, arc-less electrodes are also available ■ The product separation plate is designed to be adjustable even during operation to quickly respond to changes in feed conditions ■ The HI-VI electromagnetic vibrating feeder maintains a constant feed amount *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic sorting machine

This product is a magnetic separation system that enables high-precision sorting of ferromagnetic materials. It can be expanded from one stage to any number of stages by combining a conveyor and a weak magnetic separation unit. By utilizing multiple different weak uniform magnetic fields ranging from 0.01 to 0.07 Tesla, it is possible to simultaneously sort multi-component ferromagnetic materials with different magnetic susceptibilities. 【Features】 ■ Expandable from one stage to any number of stages ■ The conditions for magnetic separation can be freely adjusted according to the purpose ■ Applicable to various scenes in addition to electronic components ■ Precise height adjustment is possible to form a uniform magnetic field ■ Mixtures containing moderately sized ferromagnetic materials are supplied to the belt conveyor by a quantitative supply feeder *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

This product is a sorting machine that enables the high-precision separation of particles with different specific gravities using a "dry" method. It is capable of sorting a mixture of heavy, medium, and light specific gravities all at once. By automating the control of wind speed, we have introduced a mechanism that smoothly regulates the cross-sectional wind speed within the wind tunnel, achieving high-precision sorting. 【Features】 ■ Utilizes air flowing at a smooth cross-sectional wind speed in multiple wind tunnels ■ A device for specific gravity sorting using a dry method ■ After crushing treatment, the appropriately granulated mixture is supplied to the first wind tunnel by a quantitative supply feeder ■ In the recovery of tantalum capacitors from electronic component mixtures, we have achieved sorting results with a purity of over 80% for medium specific gravity recoveries *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

- Recovery of fine copper wire - Recovery of aluminum cutting chips - Recovery of metal scraps from foundry sand - Recovery of non-ferrous materials from incineration ash

• Non-ferrous metals
• Other assembly machines
• Other processing machines

Lithium-ion batteries can generate heat and ignite when mixed with container packaging plastics or shredder dust, potentially causing fire accidents. The "Elise Rare Earth Pulley" is a magnetic pulley that can attract and remove lithium-ion batteries wrapped in plastic containers, thanks to the use of powerful neodymium magnets. It contributes to the prevention of fire accident risks in waste transportation lines. Of course, it can also simultaneously attract and remove ferromagnetic foreign objects such as bolts, nuts, nails, and springs. It can be installed as a head pulley on a conveyor system and is easy to retrofit. 【Features】 ■ The adhesion effect has been confirmed through demonstration tests using various battery-powered devices such as e-cigarette heaters, mobile phones, and portable music players (some items may be difficult to attract depending on their shape and properties). ■ Sample testing is possible with demonstration units at our headquarters in Urayasu. ■ We can provide pulleys of various diameters and widths. *For more details, please refer to the product catalog available for download in PDF format.

• Other powder equipment

The "Z-200 C+" is a handheld analyzer capable of measuring carbon. (For the fluorescent X-ray analyzer, please search for "Scrapper X-250.") It features an argon gas purge using proprietary patented technology. High-purity argon gas is utilized. Additionally, it removes contaminants from the sample surface through pre-treatment with a grinder and pre-burn. Furthermore, it allows multi-point analysis in narrow areas (6 locations) and irradiates a spot of approximately 50μm. 【Features】 ■ Argon gas purge using proprietary patented technology ■ Utilizes high-purity argon gas ■ Removes contaminants from the sample surface through pre-treatment with a grinder and pre-burn ■ Multi-point analysis in narrow areas is possible (6 locations) ■ Irradiates a spot of approximately 50μm *For more details, please refer to the PDF document or feel free to contact us.

• Spectroscopic Analysis Equipment

The "LIBZ200/300" is an alloy analyzer that does not use X-rays or radiation. It analyzes various alloys, including aluminum alloys, in a short time using a powerful laser. It is capable of measuring light elements such as lithium, beryllium, and boron, which are difficult to assess with HH XRF. Additionally, it employs a sample surface cleaning technology that does not require pretreatment, using a pulsed laser for cleaning and removal. 【Features】 ■ Powerful laser ■ Cleaning and removal with a pulsed laser ■ Does not use X-rays or radiation ■ Reduces consumables and running costs ■ Capable of measuring light elements such as lithium, beryllium, and boron, which are difficult to assess with HH XRF *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The "Scrapper X-250" is a fluorescent X-ray analyzer equipped with a high-speed shutter that opens only during measurement. (For laser spectrometers, please search for "Z-200 C+".) By incorporating a high-speed shutter made of SUS316, it reduces the risk of penetration into the device and minimizes X-ray leakage from within. In addition to this model, we offer a lineup that includes the mid-range "X-200" and the cost-effective yet high-performance "X-50." 【Features】 ■ Developed analysis applications specialized for various purposes such as alloys, soil, ores, and precious metals. ■ Alloys can be identified in a matter of seconds. ■ Equipped with a high-speed shutter that opens only during measurement. *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The "ECS Separator RevX/RevX-E" is a high-precision non-ferrous metal sorting machine that uses rare earth magnets in its rotor. It is an energy-efficient model that only requires power for the rotor rotation motor and the belt drive motor. By introducing a magnetic separator for pre-processing and an electromagnetic feeder for raw material supply, even more efficient sorting is possible. 【Features】 ■ Uses rare earth magnets ■ Minimum power requirement due to the adoption of a permanent magnet rotor ■ Compact design that does not take up much installation space ■ In addition to the conventional coaxial rotor model, an eccentric rotor model is also available *For more details, please refer to the PDF document or feel free to contact us.

• Separation device

The "Rare Earth Drum Separator" is a powerful continuous magnetic separation machine that efficiently incorporates ultra-high magnetic rare earth magnets using a unique manufacturing method. 【Features】 ■ Uses ultra-high magnetic rare earth magnets ■ Capable of high-quality high magnetic separation ■ Can be installed in small spaces due to its permanent magnet design ■ Contributes to labor-saving with an automatic cleaning mechanism ■ Capable of separating fine magnetic particles, blade-like particles, and weakly magnetic minerals - For the removal of lithium-ion batteries (lithium batteries, lithium-ion batteries, Li-ion batteries, LiB) - For the removal of foreign substances such as wear powder, iron powder, and stainless steel powder from raw materials - For the recovery and recycling of stainless steel (such as SUS304)

• Separation device

The "Driver Vibrating Filter (DVF)" is a high-performance dry electromagnetic filter that captures fine magnetic foreign substances using a ferromagnetic matrix arranged in the air core of a solenoid magnet, within a high-gradient, high-magnetic field induced at its edges. As a high-magnetic magnetic separator capable of dry, sealed, continuous operation and automatic cleaning of magnetic materials, it has received high praise in a wide range of fields, including sugar, salt, glass materials, water-absorbing polymers, abrasives, various plastics, and fine ceramics. 【Features】 ■ High magnetic force ■ High-gradient magnetic field ■ High-speed low-amplitude vibration ■ Two types of magnetic field strength ■ Four models in addition to the testing machine * For more details, please refer to the PDF document or feel free to contact us.

• Other filters

The "Chip Parts Conveyor" is a conveyor designed to automatically remove and transport iron-based materials such as grinding chips, lathe chips, and small parts from machine tools. It requires no maintenance for transporting iron-based materials like cutting scraps and press stamping, and it has no moving parts outside the device, making it ideal for safety management. Due to its fully sealed waterproof structure, it is not damaged by sludge or abrasives, and there is no risk of chip entanglement; the lower part of the conveyor can be submerged in a coolant tank. 【Features】 ■ No maintenance required for transporting iron-based materials ■ Safe due to the absence of moving parts outside the device ■ Fully sealed waterproof structure ■ Built-in powerful ferrite magnet ■ The top plate is always self-cleaning *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

The "Suspended Magnetic Separator" is a device that is suspended above a belt conveyor to remove iron contaminants from the raw materials being transported. The "Electromagnetic Type" features a double cap and a three-pole magnetic structure that creates two magnetic fields on the belt conveyor, effectively attracting and removing iron pieces from the rapidly transported raw materials. The "Permanent Magnet Type" utilizes permanent magnet materials and a unique magnetic circuit design to achieve magnetic strength comparable to that of the electromagnetic type, while being compact, economical, and safe. 【Features (Permanent Magnet Type)】 ■ Uses high-retention wet anisotropic barium ferrite ■ Significantly reduces operating costs as no power supply is required ■ No electrical maintenance needed ■ No downtime due to the use of permanent magnets ■ Compact design for easy installation *For more details, please request documentation or view the PDF data available for download.

• others

The "Small Electromagnetic Vibrating Feeder" is a vibrating feeder for small to medium capacity processing that transports various raw materials in a precisely controlled state, with a wide range of tray types available. The unit of the robust "Standard Model C" is sealed and features a dustproof and moisture-resistant structure. The electromagnetic and permanent magnet drive unit can operate directly on an AC power supply without rectifiers or resistors, generating strong vibrations of 3,600 times per minute (60Hz) with low power consumption. In addition, we offer a lineup that includes the "High-Speed Model HS" and the "High-Amplitude Model HD." 【Features】 ■ Easy-to-use control ■ Sealed coils that promise stable operation for many years ■ Sealed drive components that prevent dust and moisture intrusion ■ Low power consumption ■ Model conversion possible with simple parts replacement ■ Compliant with CE standards *For more details, please refer to the PDF materials or feel free to contact us.

• Parts feeder