TOAシブル List of Products and Services

● It is a concentrated liquid type, so there is no need to prepare tap water on site or worry about stirring! ● The unique additives significantly improve separation stability! 【Features】 ■ MS-101 is a water-soluble biodegradable release agent that is environmentally friendly and safe for humans. ■ It is an environmentally considerate product, optimal for civil engineering sites near ports, rivers, and mountains, where issues such as oil spills may arise. (Fish toxicity test compliant with OECD standard 203) ■ The biodegradation rate is 74.1%. (OECD standard 301B) ■ Since it is a concentrated liquid type, it can be used immediately upon arrival. (No need for tap water preparation or stirring) ■ It does not fall under hazardous materials according to the Fire Service Act. It is also almost non-flammable (flash point 300°C [raw material]). ■ It does not fall under the risk assessment targets of the Occupational Safety and Health Act. 　* There is also MS-300, which can be diluted three times for use. (3x solution = 1 part concentrated liquid : 2 parts water) 【Applications】 ■ Steel formwork, plywood formwork, decorative plywood formwork, cedar board formwork, stainless steel formwork, resin formwork, decorative (foam) formwork.

• Lubricants
• Other consumables

【Features】 ■ FG-300 is a powerful rust preventive agent formulated with a special wax. ■ It forms a strong protective film. ■ It excels in long-term rust prevention performance for over a year. ■ It dries quickly, improving work efficiency. ■ The liquid is soft and easy to apply. *Concentrated type. ■ It creates a transparent film in a light color, resulting in a good appearance. ■ It can be easily wiped off with solvents (light oil, kerosene).

• others
• Rust Inhibitor

Concrete Norovirus Adhesion Prevention Spray The norovirus that adheres after spraying "Shooter Man" can be easily wiped off with water and a cloth. It is a high-quality product containing silicone, a powerful all-purpose guard. A thin, tough film firmly protects the sprayed area. 【Features】 ■ Prevents norovirus adhesion powerfully with just a light spray. ■ The components of Shooter Man penetrate into the base metal with use. ■ One can / 500mℓ, 24 cans per case. *Shipped by case unit.

• others
• Lubricants

Guard Scepter 101P is an anti-rust primer paint made primarily from modified polyurethane resin using water as a curing agent. Guard Scepter 101P is a highly penetrating liquid, allowing it to deeply infiltrate the rust layer, seeking out cracks, pitting, and moisture that has intruded into the grain boundaries, penetrating all the way to the iron substrate. It reacts with water molecules and releases CO2 gas into the atmosphere, effectively fixing the rust in place and forming a strong, inert polyurethane film, providing excellent anti-rust effects. 【Features】 - Guard Scepter 101P is a coating agent that can be applied directly over rust without removing it from steel formwork. - Since there is no need to scrape off the rust, it significantly reduces labor costs, time, and effort. - Its quick-drying properties greatly shorten the time required for painting work. - The hardened film is strong and is not easily affected by any solvents.

• others
• Rust Inhibitor

"Samtech Super Sabicon" is a special rust prevention agent for rebar that is completely different from conventional rebar curing methods. It allows for easy rust prevention work by simply brushing it onto the necessary areas. The rust prevention agent can remain in place during concrete pouring without needing to be removed. Ministry of Land, Infrastructure, Transport and Tourism NETIS Registration Number: QS-160012-VE 【Features】 ■ Concrete can be poured while the agent is still applied (tested for adhesion strength by the Building Materials Testing Center) ■ Easy application with a brush or roller ■ Quick-drying and forms a thin film ■ Does not tear and follows the contraction of rebar due to thermal expansion ■ Rust prevention effect lasts for 3 to 6 months

• others
• Rust Inhibitor

"Samtech R-7" is a remover that can chemically break down and remove concrete slurry made from multi-layered organic fatty acids. It demonstrates excellent effectiveness as a cleaning agent for metal forms, aluminum forms, stainless steel forms, and more. It gradually decomposes and destroys adhered concrete, mortar, and cement paste. 【Features】 ■ Easily decomposes concrete slurry adhered to temporary equipment, etc. ■ Significantly improves the efficiency of formwork maintenance and cleaning tasks ■ Requires no effort in a short time ■ Can be diluted with water up to 7 times, making it economical ■ Does not damage concrete surfaces

• others
• Cleaning agents

"Samtech R-3" is a rust remover that can easily eliminate rust from concrete surfaces, such as iron rust attached to concrete and red rust that occurs on metal forms, with simple tasks. By moistening the concrete surface with water and applying the liquid with a soft material like a sponge, it is possible to chemically remove red rust with just a light wipe. Additionally, it is highly effective not only on concrete surfaces but also for cleaning rusty metal forms and fittings. It can also be used to remove pigments (stains) from plywood. 【Features】 ■ Easily removes rust attached to concrete surfaces ■ No scraping work required ■ Does not damage concrete surfaces ■ Economical as it can be diluted with water

• others
• Other consumables

"Samtech A-1" is an excellent release agent for beautifully finishing concrete surfaces. Thanks to the action of special surfactants, it has good adhesion and spreadability on formwork, and reapplication is unnecessary even with some rainfall. The high concentration of various additives keeps this product of high quality, and its effectiveness is demonstrated on all types of formwork, including wooden, steel, and resin. It also has excellent compatibility with cedar board formwork. It creates a beautiful concrete surface with a uniform white color free of pinholes. 【Features】 ■ It is a chemical reaction-type release agent that forms a metal soap film (white powdery) by the reaction of special fatty acids contained in A-1 and the alkalinity inside the concrete, resulting in a beautiful concrete surface without oil stains. ■ It does not leave an oily film on the concrete surface, preventing the adhesion of finishing agents such as paint and mortar. ■ It has excellent spreadability, allowing for smooth application on all types of formwork. Additionally, two coats are unnecessary. ■ It does not use light oils, significantly extending the lifespan of the formwork.

• others
• Other consumables

"Samtech Alpha CX" is an optimal release agent for smooth-faced plywood formwork and stainless steel formwork. 【Features】 - It is an ideal release agent for smooth-faced plywood formwork and stainless steel formwork. - It is a dry-type release agent that is a water-soluble release agent applied to the formwork. - It can be diluted with clean water at a ratio of 5 to 10 times, making it economical. Please stir well before use. - As a water-based release agent, it does not create oil stains. - Even when the surface is dry, additives that react with concrete remain on the surface. It does not slip like oil-based release agents. - It has a strong adsorption effect, making it difficult to flow off the formwork surface. - It has a minimal mineral oil smell, making it suitable for work in confined spaces. - Additionally, it is non-flammable, allowing it to be used in places with restrictions on the entry of flammable materials, such as tunnel construction.

• others
• Other consumables