エムアイティ List of Products and Services

NuPure's "Eliminator CA" is an inline gas purifier that reduces impurities from H2 gas to sub-ppb levels at room temperature. It does not require heaters or power supplies, allowing for impurity removal at room temperature (improving gas purity). We offer models/sizes that can accommodate both low and high flow rates. 【Features】 ■ Removal of impurities to below 1 ppb ■ No heaters or power supplies required ■ Room temperature operation (RT) ■ Housing made of 316L SS (<10 Ra EP) ■ Can be regenerated for up to 10 years * There are also models available for inert gases and O2 gas. * For more details, please refer to the PDF document or feel free to contact us.

• Gas Filters

The "Omni Series" is a purifier equipped with a heater and electronic assembly. It features built-in Ultra Pure PF/XL series purifiers (filters) that can reduce gas impurities from inert gases, hydrogen, hydrogen compounds, acidic gases, oxygen, and more to sub-ppb levels. We offer a fully integrated system, including manual In/Ex valves and gas particle filters, at a low cost. 【Features】 ■ Equipped with heater and electronic assembly ■ Compact design ■ Easy operation ■ Simple operation temperature control with reliability and safety ■ Capable of on-site operation for continuous heating or room temperature operation *For more details, please refer to the PDF materials or feel free to contact us.

• Other physicochemical equipment

The "Eliminator CA" is a gas purifier manufactured by NuPure that reduces gas impurities to sub-ppb levels under room temperature operation. It removes substances such as H2O, O2, CO, CO2, H2, and NMHC from inert gases (nitrogen, argon, helium, krypton, neon, xenon) to levels below 1 ppb. We offer products with a standard size and a flow range of 0 to 2500 slpm. 【Features】 ■ Removal of impurities to below 1 ppb ■ No heater or power supply required ■ Room temperature operation (RT) ■ Housing made of 316L SS (<10 Ra EP) ■ Renewable for up to 10 years *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

The NuPure Point of Use (Inline) Gas Purifier Dryer Series removes H2O (impurities) from various gases down to the ppb level. It can be used simply by installing it in an existing gas line. It is compatible with both low and high flow rates and can be regenerated for repeated use. For more details, please contact us. (*This product is intended for high-purity gases.)

• Gas Filters
• Gas Generator
• Gas recovery/treatment equipment

The NuPure Gas Purifier Series C is an ideal gas filter for purifying back shield gas during high-purity gas welding. It combines proven gas purification technology and filtration technology into a compact, integrated gas purifier. It removes H2O and O2 from Ar gas to below 1 ppb* (when using 5N5 grade gas). Since it does not require a power supply, it has received positive feedback for use in fieldwork.

• Gas Filters
• filter
• Gas Generator

The Omni series' "NuPure Gas Purifier" is a gas purification device (gas filter) manufactured by NuPure, which integrates a heater, insulation, and electronic equipment (temperature control). It features built-in purifiers (filters) from the "Ultra Pure PF/XL series" that can reduce gas impurities from inert gases, hydrogen, hydrogen compounds, acidic gases, and oxygen to sub-ppb levels. The "PF series" includes a built-in filter with a pore size of 0.003μm. 【Features】 ■ Integrated heater, insulation, and electronic equipment (temperature control) ■ Built-in purifiers (filters) from the Ultra Pure PF/XL series ■ Reduces gas impurities to sub-ppb levels ■ PF series includes a built-in filter with a pore size of 0.003μm *For more details, please refer to the PDF document or feel free to contact us.

• Gas Filters
• Gas recovery/treatment equipment
• Analytical Equipment and Devices

"The ELIMINATOR CAG" is an inline gas purifier manufactured by NuPure, combining the technologies of a purifier and a fine particle filter. It employs patented CAG (Catalyst/Absorber/Getter) purification technology, significantly improving purification performance. As a result, it achieves purification performance with an outlet purity level of less than 0.5 ppb. It also demonstrates excellent performance at room temperature. It is effective for purifying inert gases from liquid sources. 【Features】 ■ Utilizes patented CAG purification technology ■ Significantly improved purification performance ■ Achieves outlet purity level of less than 0.5 ppb ■ Demonstrates excellent performance at room temperature ■ Effective for purifying inert gases from liquid sources *For more details, please refer to the PDF document or feel free to contact us.

• Gas Filters

The "QIII" manufactured by Pentagon Technologies is a device capable of detecting and measuring particles on sample surfaces in just a few seconds. It allows for easy and rapid measurement of particles on sample surfaces, enabling the quantification of cleaning procedures and standards, thereby reducing variability in particle management without relying on the operator's intuition and experience. It is suitable for quality checks before shipment and upon receipt of precision cleaning parts, as well as for maintaining cleanliness in various manufacturing equipment. Additionally, the "QIII SM / QIII ST" is equipped with Pentagon's unique technology designed for use in today's clean environments. 【Features】 ■ Detects/measures particles (0.1um and above) on sample surfaces in seconds ■ Clear and distinct screen display provided by a 7-inch high-resolution WVGA screen ■ Measured data can be easily downloaded directly via USB port *For more details, please refer to the PDF document or feel free to contact us.

• Particle Counter

The site pipe is an ideal product for visually inspecting and confirming the weld bead inside the tube generated by a circumferential welding machine. When this system is inserted into the welding assembly of tubes or tube fittings, it projects an enlarged image of the weld area onto the top of the head. The visible image allows for the same level of inspection as directly examining a cut sample. The site pipe for tube welding has a tapered end, making it suitable for narrow tube piping that has been constricted by the weld bead (*Regular Series).

• Industrial Endoscope
• Inspection fixture
• Welding Machine

The RPG-type end face processing machine from Germany's Orbitalum can perfectly process the end faces of tubes for precision automatic welding. Despite being lightweight and compact, the structure of the head is robust and precise, ensuring high processing accuracy. You can select the model according to the size of the tube to be processed: "RPG ONE," "RPG1.5," "RPG3.0." There is also a battery-operated type that is ideal for on-site work. We also handle replacement blades. Please refer to the catalog for more details.

• Welding Machine

S. Himmelstein & Company (SHC) has been designing and manufacturing the world's highest precision torque transducers and measuring instruments since 1960. SHC's products offer significant advantages over competitors' models, not just in terms of data on calibration stands, but also in overall performance and accuracy in testing and measurement environments.

• Torque Meter
• Torque Control
• Testing Equipment and Devices

Fluid control products that require corrosion resistance or need to maintain the purity of the medium are produced at Parker Hannifin's Partek facility. All products feature wetted parts made from scientifically inert, corrosion-resistant PFA or PTFE. The leak-proof and durable Partek products are used in various applications including semiconductor manufacturing, chemical processing, food and pharmaceutical formulation, as well as instrumentation for biomedical and analytical purposes.

• Piping Materials
• Pipe Fittings
• Pipe Fittings

These cleaning gloves have excellent grip performance suitable for a wide range of tasks. The low-protein design reduces the risk of allergic reactions caused by proteins.

• Work gloves
• Other safety and hygiene products
• Other clean room equipment and facilities

Nitrile gloves with latex-like elasticity and excellent fit (Class 100 compatible).

• Work gloves
• Other safety and hygiene products
• Other clean room equipment and facilities

3PLY cleanroom masks suitable for use in cleanrooms. ■ Low dust generation - The mask features thermal bonded non-woven fabric on both the front and back surfaces, minimizing lint generation. - Made with Class 100 compliant materials. ■ High filter performance - BFE (Bacterial Filtration Efficiency): Average 99.1% - PFE (Particulate Filtration Efficiency): Average 99.2% - VFE (Virus Filtration Efficiency): Average 99% *The values are measurements and not guaranteed values. ■ High breathability - Designed to ensure comfort for the wearer during work, with a focus on breathability. The thermal bonded non-woven fabric has very little lint generation, making it less likely to snag on facial hair and thus recommended for use outside of cleanrooms as well.

• mask

This is an external supercharger for engine bench testing. It allows for supercharging tests by retrofitting a supercharger onto the test engine. Since it comes with a control controller, there is no need to worry about controlling the boost pressure. ■Basic Specifications Flow Rate: 420 m³/h at 12,000 rpm Pressure Ratio: 1.8 (continuous) 2.0 (momentary) *Maximum pressure ratio of 3.0 is possible (two-stage supercharging) *Specifications are subject to discussion.

• Other Auto Parts
• Engine parts
• Testing Equipment and Devices

Thermocouples are temperature sensors used in various industrial fields to measure the temperature at measurement points. This technology utilizes the properties of different types of metal conductors, and the reliability of the measurements is particularly important. At MIT, we provide stable and high-quality thermocouples supported by reliable technology to a wide range of industrial sectors. If you let us know the specifications of the thermocouples (type, length, material, etc.), we can manufacture and sell them from just one unit at a short lead time and low price.

• Thermometer
• Temperature and humidity measuring instruments
• Sensors

At MIT Corporation, we sell a wide range of products used in clean rooms. Among the various sources of dust generation in clean rooms, the most significant factor is attributed to the workers. To solve the particle problems within clean rooms, dust-proof clothing and related products play a crucial role. We provide high-quality clean room products that pursue excellent dust resistance, electrostatic properties, and the comfort of the workers, supporting productivity improvement. 【Features】 ■ Wide range of products ■ Products designed for worker comfort ■ Support for productivity improvement *Please feel free to contact us.

• Other clean room equipment and facilities
• mask
• Work gloves

By using Parker Hannifin's finder leak detection liquid, you can easily, reliably, and quickly detect leaks in joints and valves of industrial gas piping with bubbles. - Excellent foaming allows for gas leak detection on any surface. - Non-corrosive and non-flammable, causing no damage to piping. - Can be applied to narrow spaces with the included flexible tube. - Suitable for temperatures ranging from -28°C to +93°C. - MSDS compliant.

• Leak Testing Equipment
• Other consumables
• Piping Materials

The data measured through computer simulation can be verified with actual equipment (real engine). A system has been realized that allows for direct observation of the combustion state, the location of NOx generation, and its spread by installing heat-resistant reinforced glass around the cylinder at 360 degrees and on the top of the piston. With the introduction of a glass cylinder, resin-based piston rings, and a special head gasket, testing operations up to high rotational speeds are possible due to low vibrations from the balancer. The engine specifications will be designed and manufactured according to the customer's requests. 【Features】 ■ 360° observation of the combustion chamber from the glass cylinder, including vertical directions ■ Direct confirmation of combustion conditions and the spread of NOx generation ■ Acquisition of various measurement data

• Testing Equipment and Devices
• others
• Testing Equipment and Devices

Using the original special scope system, it is possible to visualize the inside of the engine. ■Features - Visualization of the combustion chamber in mass-produced engines is possible. - By modifying mass-produced engines, combustion visualization tests under high loads can be conducted. - The combustion conditions and the spread of NOx generation can be directly confirmed. - Simultaneous acquisition of various measurement data such as cylinder pressure and image data is possible.

• Microscope
• Engine parts
• Other measurement, recording and measuring instruments

With a wealth of achievements, experience, and knowledge of vehicle control and powertrain fundamental operating principles, we provide total management for engine bench setup. "Vehicle arrangement → Vehicle disassembly and reassembly → Engine stand fabrication → Engine test preparation (including ECU) → Setup and fabrication of test-related peripheral equipment → In-house trial operation → On-site setup and operation confirmation." We can also handle the fabrication and setup of peripheral facilities. If you are having trouble with engine testing, please consult with us. We provide comprehensive support from software (ECU) and hardware to on-site setup.

• Analytical Equipment and Devices
• Testing Equipment and Devices
• others

■Features - Instant temperature measurement using two types of ultra-fine thermocouples - Capable of measuring the actual temperature inside the combustion chamber

• Thermometer
• Engine parts
• Other measurement, recording and measuring instruments

The "High-Pressure Gasoline Pump Unit" is a control system that can supply high-pressure fuel pressure for performance testing of gasoline engines and other applications. 【Features】 - It uses automotive parts, which provides excellent durability and efficiency. - Being mobile allows for flexibility in layout and configuration. - This single unit can supply both low-pressure and high-pressure fuel pressure. A high-pressure pump lubrication unit is also incorporated. *For more details, please refer to the PDF materials or feel free to contact us.

• Fuel system parts
• Special Pump

We will propose more efficient equipment not only in terms of performance but also considering installation space, in order to design according to the customer's specifications. We can provide a reasonable type with a control range of ±5°C, as well as a high-precision type with ±1°C. We can also manufacture heating and cooling types, as well as heating-only or cooling-only types. Additionally, it is possible to build a system with various interlocks and alarms on the equipment side. Compatible with brine water (chiller liquid) (engine coolant). We can accommodate various original control integrations.

• Heat exchanger
• Cooling system

We offer a variety of proposals in the field of combustion analysis, from measurement to equipment installation and evaluation. We also handle combustion analysis devices from other manufacturers. Customized special measurements and controls are possible with our original combustion analysis software. We excel in processing and installation techniques for encoders and in-cylinder pressure sensors. 【Features】 ■ In-cylinder pressure detection support ■ Handling of combustion analysis devices ■ Phase detection support ■ Original combustion analysis software & control *For more details, please refer to the catalog or feel free to contact us.

• Other analyses
• Other measurement, recording and measuring instruments