フレックスシステム List of Products and Services

The "EcoRange" of the Flex System achieves double the load capacity and half the weight (according to our calculations) by changing the flange hardware plate from vertical to horizontal, making it a great ally in cost reduction. The thickness of the cross-section is less than 50mm, and the height at which the flange is set can be adjusted with a cotter pin, allowing for installation in positions where rebar does not need to be cut. Additionally, since the thickness can be varied in the depth direction, the cotter pin can be set to avoid rebar in that direction as well. 【Features】 ■ Patent No. 5638018 ■ Load capacity more than double, weight approximately half (according to our calculations) ■ Cost reduction ■ Design that allows for installation without cutting rebar *For more details, please refer to the PDF document or feel free to contact us.

"Rust Remover EX" is a rust removal agent effective against all types of rust, primarily composed of phosphoric acid and food additives. When removing rust from molds, simply using Rust Remover as a final touch helps prevent rust transfer from the mold to concrete products. Depending on the degree of rust, apply this product after scraping and cleaning, or spray it on, let it sit for a while, and then rinse it off. 【Features】 ■ Effective against all types of rust ■ Odorless type ■ No chemicals or solvents used ■ Removes only rust ■ Waste liquid is safe for sewage treatment ■ Removes only rust without affecting rubber, silicone, or paint films *For more details, please refer to the PDF document or feel free to contact us.

"Rust Protect Coat" is a water-soluble, non-flammable, biodegradable rust preventive agent that takes environmental safety into consideration. After cleaning the surface, applying this product will prevent rust from rainwater, saltwater, muddy water, and salt snow. It can also be used to prevent the progression of red rust and to protect the surfaces of concrete and wood. If applying multiple coats, allow the first coat to dry for about 40 to 60 minutes before applying the second coat, and then let it dry for about 60 minutes. 【Features】 ■ Not oil-based ■ Neutral type ■ Odorless type ■ Clear type ■ Lasts up to 2 years with multiple coats ■ Main component is a resin-based mixture *For more details, please refer to the PDF document or feel free to contact us.

"Plaster G (star-shaped plastic spacer)" is a product that reduces concrete cracking by half compared to donut-shaped spacers. By accommodating multiple rebar diameters, it is possible to reduce the number of stock items. It comes in gray and special colors, making it easier to confirm sizes. In addition, we also offer products such as "GRC spacers," "concrete spacers," "Plaroll," "Plamini," and "F sponge." [Features] - Reduces concrete cracking by half compared to donut-shaped spacers - Usable for vertical rebar - Reduces stock items by accommodating multiple rebar diameters - Available in gray and special colors for easier size confirmation *For more details, please refer to the PDF document or feel free to contact us.

In the Flex System, we handle a variety of products related to manholes and concrete pipes. In the manhole category, we offer a lineup that includes "ring bolts," "liner plates," "amenity steps," and "FRP intermediate slabs." For concrete pipe-related products, we have a wide selection including "stainless steel collars" and "resin plugs," so please feel free to contact us when needed. 【Manhole Related Product Lineup (Partial)】 ■ Ring Bolt ■ Adjustment Collar ■ Pipe High Nut with Adjustment Ring ■ Liner Plate ■ Adjustment Bolt *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the products we handle, including gutters, circular water channels, variable gutters, curbs, and related covers. Our lineup includes "Z Angle (cross-section receiving frame)," "drainage plates (SUS, PP)," "height adjustment plates," and "road curb studs," among others. In addition, we offer a wide variety of products related to box culverts, fire-fighting water tanks, L-shaped retaining walls, catch basins, snow melting pipes, as well as river blocks, cap concrete, port-related products, bridges, highways, and PC sleepers. 【Partial Lineup】 ■ Z Angle (cross-section receiving frame) ■ Drainage plates (SUS, PP) ■ One-touch inserts (for vertical and inclined suspension) ■ One-touch inserts (for inversion) ■ Inserts with S caps *For more details, please refer to the PDF materials or feel free to contact us.

"Cement Cleaner DX" is a product that can be used on various surfaces. This single product is effective against various cement stains in factories. It removes cement stains in factories and construction sites with astonishing cleaning power. It contributes to reducing total costs such as labor, material, and maintenance expenses. It is safe as it does not use hydrochloric acid, is easy to use, and suppresses rust formation. [Features] - Ultra-powerful DX specification - Safe, easy to use, and suppresses rust formation without hydrochloric acid - Suitable for various surfaces *For more details, please download the PDF or feel free to contact us.