北村製作所 List of Products and Services

The "Over Slide Door" we handle allows for smooth loading and unloading of cargo located in the central part of the storage area. Loading and unloading operations at the rear are certainly possible, and even in locations where it is difficult to secure loading space, work can be done by parking the vehicle alongside. Additionally, the large opening of the side door enables loading using a forklift. It eliminates dead space in the storage area and achieves rationalization and efficiency in loading and unloading operations. 【Features】 ■ High side door sliding opening rate (approximately 60%) ■ Smooth loading and unloading of cargo located in the central part of the storage area ■ No dead space created in the storage area ■ Work can be done by parking the vehicle alongside even in locations where securing loading space is difficult ■ Loading using a forklift is possible *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a type of lift that manually pulls out a table stored under the body floor when using a lift. The table is made of a single piece, has a wide depth, and features a "tilt" function where the tip is inclined to touch the ground. A tip-over prevention caster stopper prevents the cargo from falling, ensuring safety. It is suitable for moving companies and general transportation businesses, enabling quick and efficient loading operations. 【Features】 ■ Lift capacity: 600kg・800kg ■ Effective dimensions of the lift table (length): 1,130mm ■ A foldable inclined plate is attached to the front part of the lift ■ Recommended lift option products: - Side stopper, outdoor remote control switch stainless steel storage box *For more details, please refer to the PDF document or feel free to contact us.

• others
• lift

The "Half Wing" is a product that allows loading and unloading operations using forklifts and other equipment even in low-ceiling cargo handling spaces. The "Half Wing" is designed to allow the doors to fully open if the height of the lower roof is 350 to 400 mm higher than the overall height. It provides a highly airtight environment that ensures excellent quality control for the loaded items. 【Features】 ■ Adopts a user-friendly hydraulic opening and closing mechanism, similar to the wing body. ■ Half Wing: The structure allows for full door opening if the height of the lower roof is 350 to 400 mm higher than the overall height. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Refrigerated Van" handled by Kitamura Manufacturing. It uses 50mm thick insulation material (styrene foam). It effectively cuts external heat and maintains freshness. In addition, our company also offers "Refrigerated and Freezer Vans" that use rust-resistant stainless steel for the floor and rear door structure. Please feel free to contact us. 【Features】 ■ Uses clean-colored aluminum for the exterior material ■ Effectively cuts external heat ■ Standard equipment: indoor incandescent light, top marker lamp, side marker lamp, indoor light, emergency contact switch ■ Aluminum (wave) type is also available *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Dry Van" is a basic product suitable for various industries and cargo handling and transportation, including the transportation industry, office equipment, books and publications, furniture, bedding, and interior items. It comes standard with indoor incandescent lights, top marker lamps, side marker lamps, indoor lights, and emergency contact switches. Additionally, we also offer the "Delivery Van," which is equipped with a shutter door that does not take up space when opening and closing. Please feel free to contact us. 【Features】 ■ Lightweight yet rigid, with excellent durability ■ A basic van body suitable for various industries and cargo handling and transportation ■ Standard equipment: indoor incandescent lights, top marker lamps, side marker lamps, indoor lights, and emergency contact switches ■ For aluminum exterior color, only the roof panel is standard aluminum sheet (silver) *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Bottle Car" is a product that utilizes our uniquely developed aluminum profiles, achieving weight reduction and improved fuel efficiency. The side doors use a one-touch sliding door system. Additionally, the interior layout can be freely designed to accommodate the transported goods and delivery routes. We offer a wide range of products, from regular route delivery to pallet delivery, and from ambient dry to refrigerated options. 【Features】 ■ Utilizes our uniquely developed aluminum profiles ■ Achieves weight reduction and improved fuel efficiency ■ Side doors use a one-touch sliding door system ■ Smooth loading and unloading operations possible even in narrow spaces ■ Interior layout can be freely designed to match transported goods and delivery routes *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Wind Power Generation Equipment Storage Box" is a product that is highly airtight, lightweight, and excels in seismic resistance and snow load strength. It uses adhesive-structured aluminum panels for the roof, walls, and doors, protecting the equipment from indoor temperature increases due to sunlight and salt damage. It is suitable for storing equipment when installing monitoring protection relay panels, protection relay panels, DC power supplies, etc. Please feel free to contact us when you need assistance. 【Features】 ■ Protects equipment from indoor temperature increases due to sunlight and salt damage ■ Highly airtight, lightweight, and excellent in seismic resistance and snow load strength ■ Suitable for installation in harsh locations such as salt damage areas ■ Appropriate for storing equipment when installing monitoring protection relay panels, protection relay panels, DC power supplies, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Storage
• Wind turbine
• others

The "Folding Door" is a modern safety door that allows for safe and speedy loading operations even in crowded areas with pedestrian traffic and cargo. There is no risk of the door opening while in motion, completely eliminating any potential issues with oncoming vehicles or pedestrians. It is safe even in narrow passageways. We offer a wide variety of options, such as "Folding Doors with Eaves" and "Refrigerated Folding Doors," allowing you to choose according to your needs. 【Features】 ■ Light and easy one-touch operation with one hand ■ Pursuit of functionality and safety ■ Products remain dry even in the rain ■ Safe in narrow passageways ■ Doors can open even in tight parking spaces *For more details, please refer to the PDF materials or feel free to contact us.

• others

Our company offers "Solar Power Generation Equipment Maintenance and Inspection Services." We have a comprehensive service system that can respond anywhere in the country. From Hokkaido to Kyushu, we have service centers located at our branches and sales offices in 14 locations nationwide, including those of our affiliated group companies. We strive for speedy, safe, and reliable responses. Please feel free to contact us when you need our services. 【Features】 ■ Comprehensive service system that can respond anywhere in the country ■ Service centers located at our branches and sales offices in 14 locations nationwide, including those of our affiliated group companies, from Hokkaido to Kyushu ■ We promise high-quality maintenance based on our knowledge and experience *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Solar power generator

The "Disaster Prevention Storage Warehouse" is a product that is very easy to install as it is a factory-completed item. Thanks to its excellent insulation and airtightness, it allows for long-term storage of emergency food supplies and other items. The aluminum body is resistant to corrosion and maintains a beautiful appearance. It can be customized for snow load and salt damage resistance, making it suitable for any installation location. Additionally, there are a variety of options available, including solar panels, internal shelf installation, landscape adaptation, and specified color painting. 【Features】 - The aluminum body is resistant to corrosion and maintains a beautiful appearance. - Excellent insulation and airtightness enable long-term storage of emergency food supplies and other items. - Customizable for snow load and salt damage resistance, suitable for any installation location. - Lightweight and highly earthquake-resistant, featuring Kitamura Seisakusho's e-KSP structure (flat panel specification). - As a factory-completed product, it is very easy to install. - Provides high-quality products as a manufacturer with expertise in communication station construction. *For more details, please refer to the PDF document or feel free to contact us.

• Storage
• others

This is a shelter (shelter/storage box) that houses essential head-end equipment and network facilities for cable television system configuration. We manufacture it for various purposes, including head-end use, sub-center use, and FTTH use. To prevent situations where cable television services are interrupted due to equipment failure or disasters, it is important to maintain the equipment in good condition and to take measures to ensure stable operation during emergencies. Our shelters use adhesive panels that sandwich high-insulation boards made of aluminum sheets, providing high airtightness and excellent insulation. Additionally, we select ventilation and air conditioning equipment according to the heat generation of the devices, maintaining appropriate indoor temperature and humidity to prevent condensation and sudden indoor temperature rises, thereby contributing to the longevity of the equipment. Moreover, the waterproof performance complies with JIS protection grade 4 for splash-proof types, preventing rainwater intrusion from typhoons and heavy rains that have been frequent in recent years. It also excels in seismic strength and snow load strength, protecting important equipment from natural disasters.

• power supply
• others

This is a facility (shelter/storage box) that houses disaster prevention administrative wireless equipment for prefectures and municipalities. It is utilized as a disaster prevention administrative wireless station across the country. The disaster prevention wireless system, established as a means of collecting and transmitting disaster information and disaster prevention information during emergencies, requires seismic and power outage measures to ensure that the wireless equipment functions effectively during disasters. Our facility, which excels in seismic resistance and waterproofing, protects the wireless equipment safely not only during normal times but also during disasters such as earthquakes and heavy rainfall. Additionally, because it adopts a structure with excellent airtightness and thermal insulation, it can create a suitable temperature environment for emergency power supply equipment used as a countermeasure against power outages, contributing to stable operation and longevity of the equipment. 【Features ※The seismic strength/waterproof performance/snow load strength below are examples】 ◯ Uses aluminum adhesive panels to achieve lightweight construction with excellent strength and corrosion resistance ◯ Excellent airtightness and thermal insulation protect equipment from indoor temperature rises ◯ Seismic strength... Input acceleration: Horizontal 1.0G, Vertical 0.5G ◯ Waterproof performance... Complies with JIS protection grade 4 for splash-proof type ◯ Snow load strength... Supports roof loads for snow accumulation of 2m to 6m ◯ The size of the facility can be customized according to the installation location and equipment.

• Other safety equipment
• others

This is a shelter (storage box) for a radiation monitoring system that measures environmental radiation levels in the region. It is equipped with a radiation detector on the roof and houses radiation measuring instruments, meteorological observation devices, and data transmission equipment. This product is used as an environmental radiation measurement station in prefectures across the country. Our shelter uses adhesive panels that sandwich high-insulation boards between aluminum sheets. It is lightweight yet possesses high strength and seismic resistance. Additionally, its high airtightness provides excellent insulation, preventing indoor temperature rises due to sunlight and maintaining suitable temperature and humidity for the housed equipment. It is characterized as an energy-efficient shelter, as it reduces the need for air conditioning. Furthermore, it excels in waterproofing, protecting the equipment from natural disasters such as typhoons and torrential rains. Moreover, our shelter is easier to install on-site compared to traditional buildings, allowing for quick setup. We can propose the most suitable construction methods based on the situation. Please feel free to contact us.

• Radiation detector
• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

We introduce the shelters (shelters/storage boxes) that are installed at earthquake observation points designated by the government or companies. These products house strong seismic measurement devices and communication terminals that transmit measurement data. Our shelters utilize adhesive panels that sandwich high-insulation boards with aluminum sheets. They are lightweight yet possess high strength and excellent seismic resistance. Furthermore, they have high airtightness and outstanding insulation properties. They protect housed equipment from natural disasters such as earthquakes and typhoons, contributing to the stable operation of the equipment. 【Features ※The seismic strength/snow load strength/floor strength/waterproof performance below are examples】 ◯ Uses aluminum adhesive panels to achieve lightweight and high strength ◯ Excellent airtightness and insulation, protecting equipment from indoor temperature rise ◯ Seismic strength... Input acceleration: Horizontal 1.0G, Vertical 0.5G ◯ Snow load strength... Supports roof loads from 2m to 6m of snow ◯ Floor strength... Uniform load: 5000N/m2 (however, appropriate reinforcement is required at equipment installation points) ◯ Waterproof performance... Complies with JIS protection class 4 splash-proof standards ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment ◯ Shelter size can be customized according to the installation location and equipment ◯ Easy installation work, allowing for shortened construction periods ◯ Supports maintenance and servicing after installation

• Vibration Inspection
• Vibration Monitoring

This is a shelter (housing box) for measurement stations that monitor air pollution conditions. It is suitable for housing measuring instruments and telemetry for carbon monoxide, nitrogen dioxide, sulfur oxides, suspended particulate matter, and fine particulate matter (PM2.5). To ensure stable operation of the equipment, it is important to eliminate fluctuations in temperature and humidity within the equipment housing and maintain them at appropriate levels. Our shelters use adhesive panels that sandwich high-insulation boards with aluminum sheets, providing excellent airtightness and insulation, allowing for the maintenance of suitable temperature and humidity for housed equipment throughout the year. This feature helps reduce the use of air conditioning, making it an energy-efficient shelter. Additionally, our shelters are easier to install on-site compared to traditional buildings, allowing for quick installation within a short period. We can propose the most suitable construction method based on the situation. Please feel free to contact us.

• Analytical Equipment and Devices
• Other environmental analysis equipment
• Other measurement, recording and measuring instruments

This is a rain observation shelter (shelter/storage box) that houses rain gauge data observation equipment and telemetry. Our shelter uses adhesive panels made by sandwiching high-insulation boards with aluminum sheets. It is lightweight yet possesses high strength. Furthermore, it has excellent airtightness, insulation, and waterproofing properties. It protects the housed equipment from various natural disasters and contributes to the stable operation of the equipment. 【Features】*The waterproof performance/snow load strength/earthquake resistance strength/floor strength mentioned below are examples. ◯ Uses aluminum adhesive panels to achieve lightweight and high strength ◯ Shelter size can be customized according to the installation location and equipment ◯ Mounting brackets for rain gauges can be installed on the walls and roof ◯ Easy installation work allows for shortened construction periods ◯ Excellent airtightness and insulation protect the equipment from indoor temperature rises ◯ Waterproof performance... Complies with JIS protection grade 4 for splash-proof ◯ Snow load strength... Supports roof loads for snow accumulation of 2m to 6m ◯ Earthquake resistance strength... Input acceleration: horizontal 1.0G, vertical 0.5G ◯ Floor strength... Uniformly distributed load of 5000N/m2 (however, appropriate reinforcement is required at equipment installation points) ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment ◯ Supports maintenance and upkeep after installation

• Other measurement, recording and measuring instruments
• Other environmental analysis equipment

This is a shelter (box) for river level observation that houses necessary equipment such as water level gauges and telemetry for monitoring river water levels. It is a robust and waterproof structure that protects the observation equipment not only during normal conditions but also in emergencies such as typhoons and heavy rain, ensuring accurate river level data collection. 【Features】 *The waterproof performance/snow load strength/seismic strength/floor strength mentioned below are examples. ◯ Uses aluminum adhesive panels for lightweight and high strength. ◯ Size can be customized according to the installation location and equipment. ◯ Easy installation reduces construction time. ◯ Excellent airtightness and insulation protect equipment from indoor temperature rise. ◯ Waterproof performance... Complies with JIS protection grade 4 for splash-proof. ◯ Snow load strength... Supports roof loads for snow accumulation of 2m to 6m. ◯ Seismic strength... Input acceleration: horizontal 1.0G, vertical 0.5G. ◯ Floor strength... Uniformly distributed load of 5000N/m2 (with appropriate reinforcement at equipment installation points). ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment. ◯ Supports maintenance and upkeep after installation.

• Other measurement, recording and measuring instruments

This is a shelter that houses alarm devices, power supply units, and siren control panels to notify residents in river areas about dam discharges. To ensure stable operation of the equipment, it is important to eliminate fluctuations in temperature and humidity within the equipment storage shelter and maintain them at appropriate levels. Our shelter uses adhesive panels that sandwich high-insulation boards made of aluminum sheets, providing excellent airtightness and thermal insulation, allowing it to maintain suitable temperature and humidity for the installed equipment throughout the year. Additionally, it has excellent waterproof performance and strength, protecting the housed equipment from heavy rain and snowfall. The waterproof performance complies with JIS protection grade 4, preventing rainwater from entering. It is designed to withstand snow loads of 2m to 6m, and the wall's wind pressure resistance is designed and manufactured according to the standard wind speed of the installation environment.

• Other safety equipment
• others

This is an outdoor stationary storage box (station, shelter, cubicle) designed to accommodate large-capacity nickel-hydrogen batteries, NAS batteries, lithium-ion batteries, and more. 【Features ※The waterproof performance/snow load strength/seismic strength/floor strength below are examples】 ◯ Uses aluminum adhesive panels for lightweight construction and high strength ◯ Sizes can be customized to fit the installation location and equipment ◯ Easy installation reduces construction time ◯ Excellent airtightness and thermal insulation protect equipment from indoor temperature rise ◯ Superior corrosion resistance and snow load strength protect equipment from various natural disasters ◯ Waterproof performance... Compliant with JIS protection class 4 splash-proof standards ◯ Seismic strength... Input acceleration horizontal 1.0G, vertical 0.5G ◯ Floor strength... Uniformly distributed load 5000N/m2 (however, appropriate reinforcement is required at equipment installation points) ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment ◯ Supports maintenance and upkeep after installation

• Power storage device
• Solar power generator
• others

This is a facility that houses power conditioners (PCS, or power converters) for solar power generation. It protects the power converters from various natural disasters. —Contributing to the longevity of power conditioners (PCS, or power converters)!— The average lifespan of a power converter is said to be around 10 to 15 years, with common causes of failure including "failure due to heat" and "damage from disasters such as heavy rain." Our facility protects the equipment from these causes and contributes to its longevity. Our products excel in "air tightness" and "thermal insulation," which helps to suppress indoor temperature rises caused by sunlight and equipment heat generation, thereby reducing the risk of "failure due to heat." Additionally, we select ventilation systems and air conditioning units according to the heat generation of the indoor equipment, allowing us to create an optimal temperature environment. Moreover, the waterproof performance meets JIS protection grade 4 for splash-proofing, preventing rainwater from entering during heavy rain or typhoons. It also boasts excellent snow load strength and seismic performance, protecting the equipment from various natural disasters. *We have extensive experience in manufacturing storage boxes for all types of solar power PCS manufacturers. Please feel free to contact us.

• Solar power generator
• others

When installing equipment that is susceptible to heat, it is important to prevent indoor temperature increases caused by sunlight. Our facilities utilize adhesive panels that sandwich high-insulation boards with aluminum plates, providing excellent airtightness and insulation, which allows us to maintain suitable temperature and humidity for the housed equipment throughout the year. Furthermore, we select ventilation and air conditioning equipment according to the heat generation of the housed equipment, enabling us to create an optimal temperature environment. Additionally, we can customize the size of the facility to match the installation location and the conditions of the housed equipment. If the facility size is large, it can be divided into sizes that can be loaded onto a truck for transportation and assembled on-site. We will propose the most suitable construction method according to the situation.

• others

To ensure the stable operation of housed equipment, including control panels, it is important to minimize external vibrations and shocks as much as possible, and to eliminate fluctuations in temperature and humidity within the facility, maintaining them at appropriate levels. Our facilities utilize aluminum panels with adhesive structures, making them lightweight and excellent in seismic resistance, airtightness, and thermal insulation, protecting housed equipment from temperature rises due to vibrations and sunlight. Additionally, they are characterized by energy efficiency as they can reduce the use of air conditioning. Furthermore, we employ "cationic electrodeposition coating," which has a high rust prevention effect for the substrate treatment of components. This coating adheres uniformly compared to conventional painting, offering superior corrosion resistance and durability even in harsh installation environments. Our facilities allow for easier and quicker installation on-site compared to traditional buildings. We propose the optimal construction methods based on the situation. We also select ventilation and air conditioning equipment according to the heat generation of indoor devices.

• Other energy equipment
• others

This is a corrosion-resistant shelter (shelter/storage box) suitable for installation in coastal areas. In addition to finishes such as fluororesin coating and plating, we consider the material properties of the components used and manufacture them with specifications tailored to the environment. Moreover, to ensure stable operation of wind power generation equipment (monitoring control panels, relay panels, DC power supply units, etc.), it is crucial to eliminate fluctuations in temperature and humidity within the shelter and maintain them at appropriate levels. Our shelters utilize adhesive panels that sandwich high-insulation boards with aluminum sheets, providing excellent airtightness and thermal insulation, allowing for the maintenance of suitable temperature and humidity for the equipment throughout the year. This feature helps reduce air conditioning usage, making our shelters energy-efficient. Furthermore, our shelters can be installed more easily and quickly on-site compared to conventional buildings. We can propose the most suitable construction methods based on the situation. Please feel free to contact us. ▼ Here is a video of the shelter for renewable energy facilities https://www.youtube.com/watch?v=0vx7yQdqE4k

• others
• Wind turbine

The "KSA-SN-M" is a spray cleaning device capable of six-sided cleaning through workpiece rotation. It features a compact design advantageous for intermediate installation in machining machines. The straight-flow high-capacity nozzle can flush out chips from complex internal holes. It can be used for cleaning water jacket holes in engine blocks and heads, as well as for cleaning holes in hydraulic port blocks and machined parts. 【Features】 ■ Achieves high-precision hole-targeted cleaning with NC-controlled nozzles ■ Capable of six-sided cleaning through workpiece rotation ■ Flushes out chips from complex internal holes with a straight-flow high-capacity nozzle ■ Compact design advantageous for intermediate installation in machining machines *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

We would like to introduce "Index-type Cleaning Machines and Various Automation." The "Index Cleaning Device" we handle is a highly versatile machine that can be incorporated into various processes due to its space-saving design. In addition to ensuring safety and improving work efficiency, it contributes to the efficiency of operator tasks and can be utilized in various scenarios such as the automation of the cleaning machine itself and inline automation. 【Target 01: Efficiency of Operator Tasks】 ■ Equipment Details - Area Sensors - While Switch - Input OK Lamp - Work Mis-set Detection (Poka-yoke) - Prevention of Unprocessed Item Removal (Interlock) ■ Features and Effects - Ensured safety and improved work efficiency - Assurance of cleaning quality *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

We manufacture our own adhesive panels (sandwich panels) that sandwich high-insulation boards with aluminum sheets that have excellent corrosion resistance, and we use them for roofs, walls, and doors. They are lightweight and have excellent seismic resistance. The steel materials around the doors (gate frames) and the underfloor reinforcements (cross members) are treated with cationic electrodeposition coating (*1), which offers excellent rust prevention and weather resistance. This is an equipment housing box (station building/shelter) that balances lightweight construction with high durability.

• others