ハイド List of Products and Services

This welding oxygen concentration meter is a high-performance packaged product that also includes a built-in sampling pump. With this product alone, you can measure oxygen concentration with ultra-high precision anywhere. It has a built-in battery, so there is no need to prepare a separate power source.

• Vacuum Equipment

If you own a TIG welder, you can connect it with a coupler and upgrade your existing TIG welder for fine TIG welding. It can be used for welding ultra-thin sheets of 0.3mm, butt welding of wire (Φ0.2 and above), fixing wire mesh, and mold repairs, among other applications. Advantages: - Lower initial cost compared to laser welding machines - More mobility compared to laser welding machines - Almost all TIG welders available in the domestic market can be connected Disadvantages: - TIG welding skills are required (basic operation is sufficient)

• Other process controls

Cap both ends of the pipe and back shield.

• Power tools

The Furick Cup comes in four different sizes. It is also possible to use a compact and large-diameter nozzle with a torch that uses the 10N series nozzle.

• Power tools

The "TIGCON-T Spot" is a pulse controller that enables welding of metals with a thickness of 0.3mm or less. It can be used with a standard torch switch or foot switch. The shortest arc spot time in the arc spot mode standard on TIG welding machines is 0.1 seconds, but this product can be set from 0.01 seconds. It prevents mistakes such as burn-through during thin plate welding and has minimal thermal impact on the surrounding area, which helps reduce distortion. 【Features】 ■ Capable of welding metals with a thickness of 0.3mm or less ■ Even shorter arc spot time with precise control ■ Usable with standard torch switches or foot switches ■ Can be installed on welding machines without modifications *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• controller

"TIGCON-T Complete" is a TIG welding machine output controller that combines two functions: "TIGCON-T Spot" and "TIGCON-T Pulse" into one package. You can easily switch between the ultra-short spot mode of "TIGCON-T Spot" and the pulse mode of "TIGCON-T Pulse" with just one switch. This product is recommended for those who want to use both functions together. 【Features】 ■ Combines two functions into one package ■ Easily switchable with one switch ■ Can be used in normal welding mode on a daily basis ■ Can be installed on the welding machine without modifications *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• controller

The "TIGCON-T Pulse" is a pulse controller that enables welding of metals with a thickness of 0.3mm or less. While the pulse mode standard on TIG welders repeats the output intensity, this product allows for the welding current output to be set in ON-OFF intervals of 0.001 seconds. Additionally, it allows for switching between normal welding and pulse mode with a switch operation, preventing mistakes such as burn-through during thin plate welding, and minimizing thermal impact on the surrounding area, which helps reduce distortion. 【Features】 ■ Precisely controls the ON-OFF of the welding current like a pulse ■ Can use a standard torch switch or foot switch, etc. ■ Prevents mistakes such as burn-through during thin plate welding ■ Minimal thermal impact on the surrounding area, helping to reduce distortion ■ Can be installed on the welder without any modifications *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• controller

The "Shield Gas Supply Base" is a shield gas supply tool that does not require the detachment of the back shield jig. By attaching it between the positioner and the chuck, shield gas can be supplied into the pipe from the chuck side. By using it in conjunction with our back shield jig for pipes, shield gas can be supplied directly beneath the welding bead. 【Features】 ■ No need to detach the jig when attaching or detaching the pipe ■ Automatically supplies shield gas into the pipe when used in conjunction with "HIPURGE" ■ Allows for direct supply of shield gas beneath the welding bead when used with the back shield jig for pipes ■ Three types of compatible chucks are available: WP-200, WP-300, and WP-400. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Pipe Back Shield Tool" is a product that directly supplies shielding gas to the back side of the weld. It accommodates multiple sizes and shapes through the exchange of disks and mesh on both sides. Back shielding starts instantly, freeing you from the stress of waiting for shielding gas to fill the pipe, significantly improving production efficiency. 【Features】 ■ Dramatically improves production efficiency ■ Compatible with pipes of various sizes and shapes ■ Can be used in combination with a shielding gas supply base ■ Available in two types: standard and long *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig
• Other work tools

Hyper-G is a device that automatically supplies shielding gas, synchronized with the welding machine, to the back shield fixture and trailer nozzle. It responds to the torch switch and automatically supplies shielding gas (argon gas, CO2) to the back shield fixture and trailer nozzle. <Adoption Examples> ■Usage Example: To prevent oxidation on the welding surface and the backside of the weld, particularly in the welding of thin sheets of titanium, nickel alloys, and stainless steel. ■Adopting Companies: Departments involved in welding at companies manufacturing power generation equipment such as gas turbines and aerospace industry products like jet engines. ■Benefits: Reduces the burden on workers (eliminates the need to open and close the valve for shielding gas supply), saves unnecessary shielding gas by synchronizing with the welding machine. <Features> ■Reduces the burden on workers ■No need to open and close the shielding gas supply valve ■Synchronization with the welding machine ■No need to save shielding gas ■Prevents oxidation on the welding surface and backside of the weld ■Please consider improvements for ISO9001 and ISO14001. It is possible to install it on-site and compare cost performance with conventional equipment! *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Machine

Hyper-G is a device that automatically supplies shielding gas synchronized with the welding machine to the back shield jig and trailer nozzle. It responds to the torch switch and automatically supplies shielding gas (argon gas, CO2) to the back shield jig and trailer nozzle. <Adoption Examples> ■Usage Example: To prevent oxidation on the welding surface and the back side of the weld, particularly in the welding of thin sheets of titanium, nickel alloys, and stainless steel. ■Adopting Companies: Departments involved in welding at companies manufacturing power generation equipment such as gas turbines and aerospace industry products like jet engines. ■Benefits: Reduces the burden on operators (eliminates the need to open and close the shielding gas supply valve) and saves unnecessary shielding gas by synchronizing with the welding machine. <Features> ■Reduces the burden on operators ■No need to open and close the shielding gas supply valve ■Synchronization with the welding machine ■Saves shielding gas ■Prevents oxidation on the welding surface and the back side of the weld ■Please consider improvements for ISO9001 and ISO14001 as well. It is possible to install on-site and verify cost performance comparisons with conventional equipment! *For more details, please refer to the PDF materials or feel free to contact us.

• Welding Machine

Our company has over 30 years of experience in welding, allowing us to perform welding processes that minimize distortion and damage according to the type of metal. We provide high-quality and precise finishes that make the most of TIG welding. We also offer consultations on fair pricing for thin sheet metal fabrication and address concerns regarding finishes in aluminum welding, avoidance of welding burn in stainless steel and copper, and welding for magnesium, helping to solve your problems and challenges. <Examples of Welded Products> A selection ■Repair welding ■Control cabins for railway vehicles ■Cylindrical cases ■Partition shelves ■Automobile frame repairs, among various other products. *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• Other processing machines

The "RP-CHECKER" is a shield gas residual pressure monitoring device that detects the remaining amount of shield gas through pressure. It monitors the secondary pressure of the shield gas, and if it falls below the set pressure, it alerts you with a warning sound or light. This prevents the shield gas from running out during welding and notifies you when it's time to replace the cylinder. The alarm sound is not very loud, so you won't be startled when it activates. You are warned in advance so that you don't have to interrupt your work immediately, allowing you to check the residual pressure of the regulator after finishing your work and replace the cylinder. Connection is possible anywhere between the cylinder and the welding machine. 【Features】 ■ Warning before the gas is completely depleted ■ Warnings can be set to sound, light, or none via a switch ■ Warning pressure can be set as desired ■ Connects to the primary side of the welding machine, eliminating the need for disconnection and reconnection every time the cylinder is replaced *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine

"HIPURGE" synchronizes with the welding machine to control the shielding gas for the back shield and trailer nozzle. By simply connecting it directly to the back shield fixture and trailer nozzle, it automatically supplies shielding gas. The upper coupler supplies shielding gas to the torch, while the lower coupler supplies shielding gas to other systems. If you replace materials while keeping the valve open, you will waste gas during the replacement process. Additionally, frequently opening and closing the valve can lead to forgetting to open the shielding gas valve, resulting in an increased defect rate. This product is a controller designed to reduce such unnecessary supply and defect rates. 【Features】 - No electrical troubles with the welding machine due to the controller - Ability to adjust shielding gas for the torch and other systems - Eliminates the risk of forgetting to close the valve, helping to reduce shielding gas consumption - Compact device size that does not require a specific installation location 【Adopting Companies】 Kawasaki Heavy Industries, Ltd., and others *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine

"TIGCON" is a remote control that attaches to the torch of a TIG welder and controls the welding current of the TIG welder. You can control it without worrying about the welding posture or the angle of the torch switch, and it can be used by both right-handed and left-handed individuals, with an adjustment range of 0 to 100%. It can be installed on major domestic welding machines, and with an optional adapter, it allows for the simultaneous use of your current remote control. [Features] - Certified product of the Higashi-Osaka brand - Patent obtained (No. 1542005) - Usable by both right-handed and left-handed individuals - Control range adjustable from 0 to 100% - Compatible with major domestic welding machines *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine