伊藤忠テクノソリューションズ List of Products and Services

This is a notice for a technical seminar where engineers involved in busy daily operations of cutting processing can acquire skills to effectively utilize cutting CAE in practice.

We are conducting a "Cutting Simulation Technology Acquisition Seminar" for manufacturing companies. In this seminar, participants will learn about the machining force control methods using the cutting load simulation "ProductionModule" and the simulation of cutting phenomena using the cutting-specific simulation program "AdvantEdgeFEM." We also have advanced proposals for utilizing big data from a large number of simulation results through data mining in an IoT environment. You can apply through the external link page below. We sincerely look forward to your participation. 【Overview】 ■ Examination of optimal machining conditions based on machining force control ■ Trouble prevention and cost reduction through "visualization" ■ Confirmation of the value generated by simulations *For more details, please refer to the PDF document or feel free to contact us.

Attention all machining engineers involved in cutting processes using machine tools in daily operations! We will introduce case studies on how to utilize cutting simulations for tool shape considerations, optimization of processing conditions, and improvement of tool life to benefit your work. To ensure you can efficiently carry out your tasks even in remote work environments, we will provide online support services. If you are interested in the following keywords, please download the materials and apply! ■ Optimization of processing conditions ■ Reduction of processing time ■ Cost reduction in processing ■ Consideration of tool shapes ■ Improvement of tool life ■ Examination of chips ■ Deformation after processing and more.

Attention all machining technology professionals involved in cutting processes using machine tools in daily operations! Free materials on the quantification of cutting processes will be distributed to seminar participants! While the aging of skilled technicians makes the transfer of skills urgent, cutting phenomena are complex, and it is not easy to express that experience and know-how in words. However, by simulating cutting phenomena on a computer and quantifying difficult-to-measure elements such as stress and temperature, it becomes possible to discuss current machining conditions with data, which can further be utilized for exploring better conditions. To ensure efficient operations even in telework environments, we will provide online support services. We will introduce case studies on how to utilize cutting simulation for tool shape consideration, optimization of machining conditions, and improvement of tool life. If you are interested in the following keywords, please download the materials and apply! ■ Optimization of machining conditions ■ Reduction of machining time ■ Reduction of machining costs ■ Consideration of tool shapes ■ Improvement of tool life ■ Consideration of chips ■ Deformation after machining And more!

This year's JIMTOF will be held online, and CTC has decided to participate in order to share information about the cutting simulation software we handle (AdvantEdge FEM, Production Module). In this seminar, we will introduce how cutting simulation can help solve customer challenges through demonstrations and case studies. Additionally, we will be collecting questions from everyone and will address them during the seminar, so please feel free to ask any questions you may have or anything that piqued your interest during the presentation. Agenda: 1. AdvantEdge FEM demonstration and case studies Confirmation of changes in cutting resistance and stress by altering the rake angle in 2D analysis. 2. Production Module demonstration and case studies Optimization of feed rates through smoothing of cutting loads on tool paths in conjunction with NX CAM. 3. Information on upcoming events. 4. Summary and Q&A session throughout the seminar.

☆Date: November 7, 2024 (Thursday) 15:00–16:00 (Reception starts at 14:30) ☆Venue: Tokyo Big Sight, Room 607 JIMTOF Exhibitor Workshop ☆Cost: Free ☆Capacity: First come, first served (Entry may be limited due to the number of seats in the conference room. Please arrive early.) ☆Program Overview ■Introduction of tool models into AdvantEdge and case studies from overseas technical centers Mitsubishi Materials Corporation ■Case study on the use of AdvantEdge in the development of the new product GREEN TAP OSG Corporation ■New approach for utilizing cutting simulation Itochu Techno-Solutions Corporation

We will explain the features and operations of the new versions of AdvantEdge FEM and the Production Module. In AdvantEdge FEM, it is now possible to define the movements of both the tool and the workpiece separately. This allows for the modeling of a wide range of phenomena, not only machining processes such as skiving and spinning tools but also processes like roll forming and impact analysis on metal sheets. In the Production Module, the shape of the workpiece during machining can now be output as a voxel mesh, which can be used for deformation analysis along with cutting force mapping files. 【Announcement of the Cutting CAE Conference】 The annual Cutting CAE Conference, where users utilizing cutting CAE present case studies, is scheduled to be held online on January 20, 2021. Along with the Cutting CAE Conference, we encourage you to consider participating in the webinar at this time. We sincerely look forward to your participation.

OSG Die & Mold WEB EXHIBITION OSG x Itochu Techno-Solutions Collaboration Seminar - Seminar Overview Optimizing machining conditions to achieve both maximum efficiency and tool wear reduction in mold processing is one of the challenging tasks. The "Production Module," which CTC sells and supports in Japan, can analyze NC data created by CAM and optimize machining conditions through machining simulation. By optimizing machining conditions through cutting load analysis, it stabilizes tool life and machining quality while achieving high-efficiency processing. This seminar will introduce examples using machining conditions optimized for high-hardness steel and the latest OSG high-hardness steel carbide end mills "AE-MSS-H" and "AE-MS-H."

Online Seminar on Utilizing Subsidies for Small and Medium Enterprises, including Support for Strategic Foundation Technology Advancement (Sapo-in) The Ministry of Economy, Trade and Industry has a program called the Strategic Foundation Technology Advancement Support Project (Sapo-in Project) that supports research and development and prototype development for small and medium enterprises. In this seminar, we will invite a lecturer from the Osaka Science and Technology Center, which has a wealth of experience in application support services with many successful adoptions, to discuss the overview of the system and key points for applications. The introduction of the cutting simulation software AdvantEdge is also applicable, so we encourage you to participate and consider utilizing this opportunity. We sincerely look forward to your participation. Program 14:00 Introduction to Cutting Simulation Itochu Techno-Solutions Corporation CAE Solutions Sales Department Mikio Hirota 14:10 Overview of the Strategic Foundation Technology Advancement Support Project (Sapo-in Project) and Key Points for Applications ~ Based on the Achievements of the Osaka Science and Technology Center ~ Osaka Science and Technology Center Technology Promotion Department, Research Officer Mr. Yoshihiro Matsumoto 14:40 Q&A Session

Online Seminar on Utilizing Subsidies for Small and Medium Enterprises, such as Support for Strategic Foundation Technology Advancement (Sapo-in) The Ministry of Economy, Trade and Industry has a program to support research and development and prototype development for small and medium enterprises called the Strategic Foundation Technology Advancement Support Program (Sapo-in). In this seminar, we will invite a lecturer from the Osaka Science and Technology Center, which has a wealth of experience in application support for this program, to discuss the overview of the system and key points for application. It is also applicable for the introduction of the cutting simulation software AdvantEdge, so we encourage you to participate and consider utilizing it. We sincerely look forward to your participation. Program 14:00 Introduction to Cutting Simulation Itochu Techno-Solutions Corporation CAE Solutions Sales Department Mikio Hirota 14:10 Overview of the Strategic Foundation Technology Advancement Support Program (Sapo-in) and Key Points for Application ~ Based on the Achievements of the Osaka Science and Technology Center ~ Osaka Science and Technology Center Technology Promotion Department, Research Officer Mr. Yoshihiro Matsumoto 14:40 Q&A Session

We hold the "Cutting CAE Conference" every year as a platform to share various case studies utilizing CAE with engineers involved in cutting processing. This will be the 19th edition, and like the previous one, it will be held online. Since there will be valuable presentations, we kindly ask you to consider participating. Below are the presenting companies and universities (in order of presentation, honorifics omitted): - Itochu Techno-Solutions Corporation - Yamawa Manufacturing Co., Ltd. - Yanmar Holdings Co., Ltd. - Ashikaga University You can check the program details and presentation summaries from "Click here to apply." Please note that the program content and schedule may change without notice. This seminar will be live-streamed. There are no plans for archive distribution. (Note) This seminar has concluded.

We will be exhibiting at the "31st Japan International Machine Tool Fair JIMTOF2022" held at Tokyo Big Sight. On Thursday, the 10th, we will hold a workshop introducing our key technology, cutting simulation technology. We have invited three leading companies in this field to give presentations. Please be sure to visit our exhibition booth (E5028). We sincerely look forward to your attendance. 【Exhibition Overview】 ■ Dates: November 8 (Tuesday) to November 13 (Sunday), 2022, for 6 days ■ Opening Hours: 9:00 AM to 5:00 PM (until 4:00 PM on the last day) ■ Venue: Tokyo Big Sight (Tokyo International Exhibition Center), entire building ■ Booth Number: E5028 *For more details, please refer to the PDF document or feel free to contact us.

The deformation analysis option "Distortio" of the cutting process simulation Production Module allows for the analysis and simulation of material deformation caused by machining. This shifts the decision-making of machining conditions from experience and intuition to pre-examination through simulation. Itochu Techno-Solutions Corporation, which supports your company's digital transformation (DX), offers cutting process simulation. We are now in the era of digital twins, where you can simulate the machining results by changing tools or modifying machining paths. We would be happy to assist you in digitizing your machining challenges! *For more details, please refer to the PDF materials or feel free to contact us.