マツキ List of Products and Services

The "MR-2043S" is a set of 43 pieces, including bits and short sockets. It features a compact body approximately 120mm long with a 1/4" bit drive, a push-release 1/4" square drive, and a spinner wheel for quick rotation, along with a 180° flexible function. With its tight body and thin head with 72 gears, it excels in tasks with limited clearance. 【Features】 ■ Excellent usability in tight spaces ■ 72 gear teeth ■ Spinner hole for quick rotation ■ Slides to hold bits *For more details, please refer to the PDF document or feel free to contact us.

The "SHL7713A" features a COB strip light, enabling a flat and brighter illumination. It comes standard with high-brightness COBs in two locations: the front and the top, allowing for versatile use depending on the purpose. The body can move 180° back and forth and rotate 360° left and right, making it suitable for any work environment. It also has a convenient foldable hook on the back. Equipped with a battery indicator! You can easily see the charging status and remaining battery level at a glance. 【Features】 ■ Durability + Shock Resistance ■ Special Rubber Coating ■ COB Strip Light Adoption ■ Increased Work Efficiency with Magnets on the Bottom and Back ■ Waterproof Level IP65 Compliance ■ Battery Indicator Included *For more details, please refer to the PDF document or feel free to contact us.

The "MWH315" is a wrench holder equipped with a powerful magnet that is convenient for organizing and storing wrenches. It can hold 15 sockets and can be used anywhere that magnets stick, such as inside a tool chest. You can choose from two colors: black and red. 【Features】 ■ Equipped with a powerful magnet for convenient organization and storage ■ Usable anywhere that magnets stick ■ Can hold 15 sockets ■ Color variations: red, black *For more details, please refer to the PDF document or feel free to contact us.

The "FMHS312S" is a flex socket set that demonstrates its power in tasks in narrow and recessed areas. It offers a full range of sizes from 8 to 19mm. [Features] ■ For work in narrow and recessed areas ■ Full range of sizes from 8 to 19mm *For more details, please refer to the PDF document or feel free to contact us.

The "Flex Flare Cross Wrench" is convenient for brake bleeding due to its 75-degree deep offset. With its flexible mechanism, it can be easily used in tight engine spaces. 【Features】 ■ 75-degree deep offset ■ For bleeding air in 8mm light vehicles ■ Equipped with a flexible mechanism ■ Can be easily used around the engine *For more details, please refer to the PDF document or feel free to contact us.

The "P-E305A" is a 5-piece insulated tool set that has passed compliance standards such as EN60900 and IEC60900, making it suitable for the maintenance of HV (hybrid vehicles) and EV (electric vehicles). It features a strong single-layer coating that is resistant to wear and peeling. Compared to rubber-based insulating materials, the special coating process achieves a thin design. Usability in tight spaces has also been improved. 【Features】 ■ Complies with EN60900 and IEC60900 standards ■ Hard injection molding (strong single-layer coating) ■ Special coating process achieves a thin design ■ Improved usability in tight spaces ■ Enhanced durability *For more details, please refer to the PDF document or feel free to contact us.

The "RGW-4S" is a 4-piece reverse gear wrench set that improves work efficiency by adopting a gear with 72 teeth for the wrench part, allowing for precise tightening. With its unique spline shape, it can accommodate various screws with just one size. After removing the tray, it can also be used as a storage case by inserting the upper tray into the lower one. 【Features】 ■ Wrench part with 72 teeth (5-degree engagement angle) ■ Excellent workability ■ Unique spline shape ■ Accommodates various screws with just one size *For more details, please refer to the PDF document or feel free to contact us.

The "LRS-280A" is a telescopic scraper that is useful for removing stickers from windshields and bumpers. It features a three-stage telescopic design that allows it to reach recessed areas conveniently. The blade can be easily replaced. Replacement blades can be stored inside the hollow handle. 【Features】 ■ Effective for sticker removal ■ Three-stage telescopic design ■ Conveniently reaches recessed areas ■ Easy blade replacement *For more details, please refer to the PDF document or feel free to contact us.

The "MR-225B" is a 25-piece mini ratchet set with a short bit of 16mm in length, making it highly convenient for use in tight spaces. 【Features】 ■ Excellent usability in narrow spaces ■ Case dimensions: 78×132×40mm ■ Weight: 270g *For more details, please refer to the PDF document or feel free to contact us.

The "78303M Series" is a 3/8" & 1/4" DR. 78PC. tool kit from the automotive maintenance tool brand "Autobahn." The tray is made of flexible and durable EVA resin, making it very convenient for tool management with a size chart included. Choose from four colors: red, black, silver, and orange. 【Features】 ■ Convenient side handles for easy portability ■ Bearing-type drawers for light and smooth sliding *For more details, please refer to the PDF document or feel free to contact us.

The "46302M" is a portable type two-tier bearing drawer toolbox equipped with a carefully selected set of tools, featuring a 9.5mm drive size starter tool kit. It comes standard with a smart head ratchet (MHR-3). It's even smarter than the conventional compact head! Achieving a slim design and high torque. The EVA resin tray adopts a luxurious black color. It is elastic and features size markings, making tool management very convenient. 【Features】 ■ Drive size: 9.5mm ■ 9-piece ball point key wrench set with extractor function: - Adopts a three-flat shape (exhibits great power when dealing with stripped screws) ■ Bearing-type drawer: Light and smooth sliding ■ Two-tier toolbox ■ Round magnetic tray *For more details, please refer to the PDF document or feel free to contact us.

The "51402M" is a 1/2" drive tool kit suitable for maintenance of medium to large vehicles that require powerful work, as well as for servicing components like the suspension. It comes standard with a reinforced long flex handle. The long type, measuring 450mm in total length, is recommended for easier torque application. The EVA resin tray features a luxurious black color. It is elastic and has size markings, making tool management very convenient. 【Features】 ■ Drive square: 12.7mm ■ 9-piece ball point hex wrench set with extractor function: - Adopts a tri-flat shape (provides great power when dealing with stripped screws) ■ Bearing-type drawer: Light and smooth sliding ■ Reversible gear wrench: The socket part has a ring to securely hold nuts - Can accommodate go-through sockets, and there are no issues with long protruding bolts *For more details, please refer to the PDF document or feel free to contact us.

Our original brand "AUTOBAHN" offers the 'MR-237S', a stubby socket and bit set stored in a lightweight and sturdy compact case. The stubby sockets are compact in both height and outer diameter, making them highly functional even in narrow and tight spaces. Additionally, the micro head ratchet and stubby micro bit ratchet feature top-class compact heads with 72 teeth. 【Features】 ■ Lightweight and durable compact case ■ Compact size, ideal for use in narrow and tight spaces ■ Achieves a compact head design *For more details, please refer to the PDF document or feel free to contact us.

The "RMH-72" is a rubber hammer that utilizes a special rubber that is elastic but hardens during use. By using a hexagonal head, the force is evenly distributed. The special rubber is soft under normal conditions but becomes hard when struck. It is used for pressing and securing vehicle door weather strips, fender arch moldings, outside door moldings, and interior clip parts. 【Features】 - Utilizes a special rubber that is elastic but hardens during use - Used for pressing and securing vehicle door weather strips, fender arch moldings, outside door moldings, and interior clip parts - The hexagonal head evenly distributes force - The ergonomically designed handle ensures efficient force transmission - The special rubber is soft under normal conditions but becomes hard when struck *For more details, please refer to the PDF document or feel free to contact us.

The "RBJ-192S" is a suitable thin hexagon wrench for replacing the lower arm ball joints of Toyota vehicles. Since it uses a hexagon design, it can handle torque-intensive tasks without any issues. Its thin profile makes it ideal for working in tight spaces. The tightening torque varies by vehicle model but ranges from 130N·m to 160N·m. 【Features】 ■ Suitable for replacing the lower arm ball joints of Toyota vehicles ■ The hexagon design allows for torque-intensive work without issues ■ Thin profile makes it ideal for working in tight spaces ■ Tightening torque: varies by vehicle model, but ranges from 130N·m to 160N·m ■ Made in Japan *For more details, please refer to the PDF document or feel free to contact us.

The "WL-500" is a USB rechargeable work light with a magnetic stand. It offers three lighting modes: top light (150lm), main light (250lm), and main light (500lm). It features a battery level indicator, and the adjustable grip allows for a 180-degree angle adjustment. 【Features】 ■ Brightness up to 500lm ■ Equipped with a hanging hook on the back ■ Glow-in-the-dark function: emits light for a while in the dark after being turned off ■ Built-in magnet on the bottom for attachment to metal surfaces ■ Waterproof performance: equivalent to IPX5 *For more details, please refer to the PDF document or feel free to contact us.

The "RBJ-1719S" is a suitable thin hexagon wrench for replacing the lower arm ball joint on Toyota vehicles. Being thin, it is ideal for working in tight spaces. Since it uses a hexagon design, it can handle high-torque tasks without any issues. The tip of the wrench is tapered, making it easy to access castle nuts. 【Features】 ■ Made in Japan ■ Suitable for replacing the lower arm ball joint on Toyota vehicles ■ Thin design makes it suitable for working in tight spaces ■ Utilizes a hexagon design ■ No issues with high-torque tasks *For more details, please refer to the PDF document or feel free to contact us.

The "AES-160" is an electric scissors with a special serrated blade design that allows for smooth cutting without missing the material being cut. Since the grip and blade are integrated, there is no problem with gripping the outside of the grip firmly. Additionally, it features a wire stripper function for 1.5mm² and 2.5mm² wires. 【Features】 ■ Rust-resistant stainless steel blade ■ Wire stripper function for 1.5mm² and 2.5mm² ■ Can crimp terminals on the inside of the grip ■ Serrated blade allows for smooth cutting without missing the material ■ Easily cuts wires (such as VVF) with light force ■ Convenient compact size for portability, comes with a storage case *For more details, please refer to the PDF document or feel free to contact us.

The AHS-185 is a heavy-duty scissor that is lightweight, easy to hold, and has a non-slip grip. The serrated edge ensures that the cutting target is securely held, and the sharp blades allow for a wide range of uses from aluminum sheets to tissue paper. The lock lever features a nylon cap for easy one-handed operation. 【Features】 - Stainless steel blades are sharp and durable - Lightweight and easy to hold with a non-slip grip - Serrated edge prevents cutting targets from slipping - Sharp blades allow for a wide range of uses from aluminum sheets to tissue paper - Spring-loaded for easy opening *For more details, please refer to the PDF document or feel free to contact us.

The "CRS-154" is a craft scissors with a rust-resistant stainless steel blade. The serrated edge allows for cutting without missing the target. It is suitable for use with double-sided tape and has a Teflon coating, making it capable of cutting cardboard, tablecloths, plastic, CDs, cards, paper, and more. 【Features】 ■ Dimensions: 154mm ■ Rust-resistant stainless steel blade ■ Teflon coating on the blade makes it ideal for use with double-sided tape ■ Serrated edge allows for cutting without missing the target ■ Can cut cardboard, tablecloths, plastic, CDs, cards, paper, etc. *For more details, please refer to the PDF document or feel free to contact us.

【Features】 - Equipped with 21 LED lights to ensure visibility in the work area. - Made of durable EVA material. - Lightweight, can be folded into three parts for compact and convenient portability. - Gently protects the back, knees, and feet with cushioning material during work. *For more details, please refer to the PDF document or feel free to contact us.

The "MTR210R" is a remover suitable for the interiors of modern cars, such as console panels and trims, which can be difficult to remove with conventional resin and plastic removers. It features two types of thin tips: "bent type" and "straight type," which fit into various gaps. Made of metal, it offers excellent strength and is sized to fit comfortably in the hands of Japanese users, allowing for stable work. 【Features】 ■ Easily fits into narrow gaps ■ Metal construction ensures safety when applying force ■ Two shapes for various locations - Bent type: The exquisite curve fits into gaps - Straight type: Easy to insert anywhere and user-friendly *For more details, please refer to the PDF document or feel free to contact us.

The "ILS-1503" is a long impact socket for wheels that can accommodate deep rim aluminum wheels. It features a resin stopper at the bottom of the hexagonal part to prevent scratches on decorative nuts. This set includes three sockets: a blue 17mm, a yellow 19mm, and a red 21mm. 【Features】 ■ Color-coded for easy size identification ■ Long type design suitable for deep rim aluminum wheels ■ Resin stopper at the bottom of the hexagonal part to prevent scratches on decorative nuts *For more details, please refer to the related links or feel free to contact us.

We would like to introduce the "Magnet Silicone Tray Set of 2" handled by Matsuki Co., Ltd. Made of silicone resin and foldable, it can be stored compactly and prevents scratches on the workbench or the parts being stored. Additionally, the entire bottom surface is magnetic, ensuring a strong hold. Please feel free to contact us if you have any inquiries. 【Features】 ■ Foldable for compact storage ■ Prevents scratches on the workbench or stored parts ■ Entire bottom surface is magnetic for a strong hold *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our operation cart 'OSC-23031'. It makes using a scan tool during OBD inspections and vehicle diagnostics easy, and it is also convenient for storage and movement. With a stopper included, your PC or scan tool won't slide off. Additionally, the top lid and drawer can be locked with a key. 【Features】 ■ The stopper prevents your PC or scan tool from sliding off. ■ The top lid can temporarily store your PC or scan tool. ■ The top lid and drawer can be locked with a key. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our 3/8" DR. 75PC Deluxe Tool Set, 'No. 267175AM Series'. This set includes a variety of items such as the "DR. Wave Socket," "Double Flex Lock Gear Wrench," and "Round Magnetic Tray," among others. The drawers feature a lightweight and smooth bearing system. You can choose from two colors: red and black. 【Set Contents (Partial)】 ■ DR. Wave Socket ■ DR. Wave Deep Socket ■ DR. Spark Plug Socket ■ DR. Free Angle Universal Joint ■ DR. Hex Bit Socket *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our roller cabinet, the '2671AM Series'. It offers ample storage capacity, and the drawers are equipped with lightweight and smooth bearing mechanisms. We have two colors available: red and black. Additionally, the included tool tray, handle, and casters are products that require assembly by the customer. 【Lineup】 ■2671AMR (Red) ■2671AMB (Black) *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Non-Slip Extra Long Wrench Set." Thanks to its special design (anti-drop design), it makes it easy to tighten and loosen not only standard bolts and nuts but also bolts and nuts that are 85% stripped, rough bolts and nuts (with chips or burrs), and thin-headed bolts and nuts. The set consists of five pieces in sizes: 8×10, 12×13, 14×15, 16×17, and 18×19mm. Please feel free to contact us when you need assistance. 【Features】 ■ The special design makes it easy to tighten and loosen various bolts and nuts ■ Set sizes: 8×10, 12×13, 14×15, 16×17, 18×19mm *For more details, please refer to the PDF document or feel free to contact us.

The "Long Flexible Narrow Ratchet Wrench Set" is a product expected to be effective as a belt tensioner wrench for automobiles. It is suitable for light vehicles, regular cars, and one-box vehicles. It adopts a gear with 100 teeth (with a feed angle of 3.6 degrees), providing excellent workability even in narrow engine compartments with precise feed angles. Additionally, by attaching a 9.5mm adapter for the wrench, commercially available sockets can also be used. 【Features】 - Effective for light vehicles, regular cars, and one-box vehicles - Excellent workability with precise feed angles - The wrench socket set includes frequently used sizes of 14, 17, and 19 millimeters - By attaching a 9.5mm adapter for the wrench, commercially available sockets can also be used *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "3/8” DR. Ratchet Handle 120T." It features a gear with 120 teeth (with a 3-degree swing angle), providing excellent workability with its fine swing angle. Additionally, it is equipped with a quick-release function that allows for smooth attachment and detachment of sockets, making it suitable for final tightening tasks. 【Specifications (excerpt)】 ■ITEM NO: MRH3120PB ■Drive Size: 3/8” (9.5mm) ■D1 (mm): 29.8 ■D2 (mm): 27.5 ■Overall Length (mm): 178 ■Weight (g): 235 *For more details, please refer to the PDF document or feel free to contact us.

The "SLSRW-20" is a convenient item that can be used anywhere inside a tool chest or in places where magnets stick. It has an overall length of 360mm, a 3/8" (9.5mm) drive size, and can hold up to 20 sockets. The sockets can be inserted and removed using a spin-lock mechanism that locks and unlocks the sockets by twisting them. 【Features】 ■ Double socket rail with a powerful magnet, convenient for organized storage ■ Usable anywhere inside a tool chest or in places where magnets stick ■ Can hold up to 20 sockets *For more details, please download the PDF or feel free to contact us.

We would like to introduce our magnet tray, the 'MGA-100MB'. This product is designed to securely hold removed parts, screws, bolts, and nuts with strong magnetism, helping to prevent loss. The tray size is 100mm in diameter and 18mm in depth, with a weight of 185g. It is made of stainless steel. 【Features】 - Strongly holds removed parts, screws, bolts, and nuts with a magnet, helping to prevent loss. - Comes with a carabiner for easy attachment to your waist or other areas. - The bottom surface has a textured design for easy retrieval. *For more details, please download the PDF or feel free to contact us.

We would like to introduce our magnet tray, the 'MGA-100R'. It comes with a carabiner that allows it to be attached around the waist, and the bottom surface has a textured design for easy retrieval. Additionally, it strongly attracts removed parts, screws, bolts, and nuts with magnets, helping to prevent loss. 【Features】 ■ Strongly attracts removed parts, screws, bolts, and nuts with magnets, helping to prevent loss ■ Comes with a carabiner for attachment around the waist ■ Textured bottom surface for easy retrieval *For more details, please download the PDF or feel free to contact us.

We would like to introduce the 'MR-2035BS', a 35PC 1/4” DR mini ratchet stubby socket and bit set that we handle. It is stored in a lightweight and sturdy compact case, making it easy to use even in narrow and tight spaces. Additionally, the case dimensions are 78×131×41mm, and the weight is 443g. Please feel free to contact us if you need any assistance. 【Features】 ■ Compact size in both height and outer diameter ■ Stored in a lightweight and sturdy compact case ■ 72 teeth gear ■ Excellent usability in narrow and tight spaces *For more details, please download the PDF or feel free to contact us.

We would like to introduce the 'UEXOWS-7S', a 7PC Universal Extractor Offset Wrench Set that we handle. Thanks to its special design, it allows for easy tightening and loosening of hex metric, 85% stripped hex, E-type Torx, and 12-point metric bolts and nuts with just one size. The set includes sizes of 6×7, 8×9, 10×11, 12×13, 14×15, 16×17, and 18×19mm. 【Features】 ■ Surface treatment with a luxurious black special electrodeposition finish ■ The universal extractor wrench is designed to work with just one size ■ Easy tightening and loosening operations *For more details, please download the PDF or feel free to contact us.