和泉テック List of Products and Services

At Izumi Tech Co., Ltd., we deliver equipment nationwide in Japan. Please feel free to consult with us first. Our experienced staff will listen to your needs. After that, we will conduct a site survey of the origin, destination, and route for the relocation, as well as an inspection of the equipment and facilities. Regarding the loading and unloading operations, our experienced and proven staff will work quickly, accurately, and safely. Depending on the location of the relocation, we will arrange vehicle transportation. Please feel free to consult with us first. 【Process (Partial)】 ■ Consultation ■ On-site survey ■ Creation of relocation equipment (items) list / Submission of estimate and contract ■ Creation of schedule layout / Formation of relocation team ■ Conducting a relocation briefing session *For more details, please refer to the external link page or feel free to contact us.

• Other contract services

This system is a "cryogenic Hall measurement system" that allows for the cooling control of samples at temperatures ranging from 4.2K to 300K by connecting to the Hall effect measurement device you have. Additionally, the standard-equipped temperature controller enables data communication with existing devices via GP-IB. Pressing can be done in a vacuum or gas atmosphere. 【Features】 ■ Capable of cooling control of samples at temperatures from 4.2K to 300K ■ The standard-equipped temperature controller allows for data communication with existing devices via GP-IB ■ Pressing can be done in a vacuum or gas atmosphere *For more details, please refer to the external link page or feel free to contact us.

• Other measurement, recording and measuring instruments
• Voltage Meter

This product is a "superconducting cable voltage measurement device" that measures the resistance of any cable while capturing enlarged images of the cross-section of a superconducting cable sample approximately 20mm thick from both sides using a CCD camera. It is equipped with a load cell to apply a constant pressure of the probe against the sample. This allows for the adjustment of contact pressure, making it compatible with various samples. 【Features】 ■ Measures the resistance of any cable while capturing enlarged images with a CCD camera ■ Effective for observation and positioning in hard-to-see locations ■ Equipped with a load cell to apply a constant pressure of the probe against the sample ■ Adjustable contact pressure allows compatibility with various samples *For more details, please refer to the external link page or feel free to contact us.

• Other measurement, recording and measuring instruments
• Voltage Meter

This product is a "Constant Temperature Vacuum Prober" that uses aluminum material for the base to reduce weight and features vacuum suction on both the top and bottom. The temperature control system has two cycle control systems. The stage section has temperature control functionality, allowing measurements to be taken in environments with vacuum, gas atmosphere, and variable temperature. 【Features】 ■ Expandable to a maximum of 4 probes ■ The stage section has temperature control functionality, allowing measurements in environments with vacuum, gas atmosphere, and variable temperature ■ Vacuum suction on both the top and bottom ■ The base is made of aluminum material to reduce weight ■ Temperature control has two cycle control systems *For more details, please refer to the external link page or feel free to contact us.

• Vacuum Equipment
• Other machine elements

We would like to introduce the "Vacuum Hot Press" handled by Izumi Tech Co., Ltd. Maximum load: 1.5t (hydraulic). Temperature can reach up to 400°C, with separate control for upper and lower sections. Pressing can be done in a vacuum or gas atmosphere. For pneumatic presses, we also handle 1t. 【Specifications】 ■ Maximum load: 1.5t (hydraulic) ■ 1t available for pneumatic presses ■ Temperature can reach up to 400°C, with separate control for upper and lower sections ■ Sample size: φ80 ■ Equipped with pressure load cell + display ■ Exhaust system: RP *For more details, please refer to the external link page or feel free to contact us.

• Other machine elements

This product is a "small pressure hot press" that is pressurized using a manual hydraulic jack. It can reach temperatures of up to 300°C. It features vacuum suction on both the upper and lower sides. To reduce weight, the base is made of aluminum. The temperature control uses a dual cycle control system. 【Features】 ■ Simple hot press for polymer materials ■ Pressurized with a manual hydraulic jack ■ Can reach temperatures of up to 300°C ■ Vacuum suction on both the upper and lower sides ■ Temperature control uses a dual cycle control system *For more details, please refer to the external link page or feel free to contact us.

• Other machine elements

This device is a microwave nanocrystal generation apparatus that efficiently produces organic nanocrystals injected into a solvent solution of 10mL to 30mL using microwaves. It operates automatically, excluding manual injection. Additionally, it allows for various adjustments to the generation conditions, including settings for microwave power, heating temperature, and holding time. 【Features】 - Automatic operation, excluding manual injection - Ability to adjust generation conditions with settings for microwave power, heating temperature, and holding time - Standing wave method using a short plunger with a waveguide type to improve heating efficiency - Equipped with an observation port to allow visibility inside the reaction chamber *For more details, please refer to the external link page or feel free to contact us.

• Other machine elements

The "lZR-1600" is a compact-sized hydrogen reduction atmosphere furnace designed for its indoor dimensions. The installation dimensions are 700mmW × 1800mmH × 810mmD, and the weight is approximately 600Kg. It accommodates two gas lines. Safety is designed for hydrogen exhaust. 【Features】 - Designed to be compact relative to its indoor dimensions - Accommodates two gas lines - Safety is designed for exhaust *For more details, please refer to the external link page or feel free to contact us.

• Incinerators and incinerators
• Electric furnace

We would like to introduce the "Vacuum (Gas Replacement) Heating Furnace" handled by Izumi Tech Co., Ltd. In addition to O2, Ar can also be used as a gas. The furnace body is movable for rapid cooling of samples. This is a quartz tube external heating furnace that allows for vacuum heating and gas replacement heating. 【Specifications】 ■ Exhaust system: RP + TMP / Achievable vacuum: 5 x 10^-5 Pa ■ Gas can be used in addition to O2: Ar is also available ■ Max temperature: 1000℃ ■ Inner diameter of quartz tube: φ76 ■ The furnace body is movable for rapid cooling of samples *For more details, please refer to the external link page or feel free to contact us.

• Incinerators and incinerators
• Electric furnace

Introducing the "Magnetic Field Heating Furnace" handled by Izumi Tech Co., Ltd. Internal dimensions: φ50 quartz tube. Sample size: 12mm opening x 5 pieces arranged vertically. It can heat up to 800℃ in a narrow space with an electromagnetic gap of 80mm, which was previously impossible. 【Specifications】 ■ Internal dimensions: φ50 quartz tube ■ Sample size: 12mm opening x 5 pieces arranged vertically ■ 10^-5Pa (PR. Molecular pump) ■ Minimum gap: up to 80mm ■ Maximum temperature: 800℃ *For more details, please refer to the external link page or feel free to contact us.

• Incinerators and incinerators
• Electric furnace

The "High-Temperature Sample Rapid Cooling Test Furnace" is an electric furnace that allows for rapid cooling by dropping the sample through a lower opening after heating it up to a maximum of 1500°C with gas replacement. The power supply is 3-phase 200V 60A, and it uses a dual-channel programmable temperature controller. Additionally, the sample size is φ30x60 (suspended by platinum wire). 【Features】 ■ Allows for rapid cooling by dropping the sample through a lower opening after heating it up to a maximum of 1500°C with gas replacement ■ Power supply is 3-phase 200V 60A ■ Dual-channel programmable temperature controller ■ Sample size is φ30x60 (suspended by platinum wire) *For more details, please refer to the external link page or feel free to contact us.

• Electric furnace

The "High-Temperature Gas Atmosphere Furnace" is an experimental furnace that allows sample insertion from the bottom. The internal dimensions of the heater are φ140mm × 300mmH, and the weight is 200Kg. It employs digital program PID control. 【Features】 ■ Experimental furnace that allows sample insertion from the bottom ■ Internal dimensions of the heater are φ140mm × 300mmH ■ Weight is 200Kg *For more details, please refer to the external link page or feel free to contact us.

• Electric furnace

The "LPE device (vertical two-stage heating furnace)" is an electric furnace used for experiments involving temperature differences in molten metal. The size is φ80×300 (effective inner diameter) ×2 stages. Individual temperature control for the upper and lower sections is possible. Additionally, the driving mechanisms include "up and down movement of the furnace body" and "up and down movement of the sample (molten metal)," as well as "upper rod rotation mechanism and fine vertical movement." 【Features】 ■ Used for experiments involving temperature differences in molten metal ■ Driving mechanisms - Up and down movement of the furnace body - Up and down movement of the sample (molten metal) - Upper rod rotation mechanism and fine vertical movement *For more details, please refer to the external link page or feel free to contact us.

• Electric furnace

The "Layered Thin Film Production Device" is a layered thin film production process using a chemical solution method, which automates the repetition of the processes of spin coating, drying, firing, and cooling using a robot, enabling the automatic production of thick films through multilayer coating. With program settings controlled by a computer, it allows for detailed condition settings for each process of spin coating, drying, firing, and cooling, as well as the omission of processes, changes to the process flow, and the saving of processes at will. 【Features】 ■ Spin coating, drying, and firing can be changed at will by a CPU system ■ Each process can be operated manually, automatically, or in both modes ■ Substrate shapes can be round, square, or both ■ The spin coater is designed to prevent liquid dripping *For more details, please refer to the external link page or feel free to contact us.

• Other semiconductor manufacturing equipment

The "Compact Sputtering Device" is a laboratory high-vacuum thin film deposition system equipped with a 1.3-inch magnetron sputter cathode. It is equipped with an RF power supply with a matching unit for discharge. It features a dual gas nozzle capable of supporting oxidation reaction sputtering. Additionally, it can process substrates up to a maximum diameter of 1 inch. 【Features】 ■ Equipped with a 1.3-inch magnetron sputter cathode ■ Comes with an RF power supply with a matching unit for discharge ■ Features a dual gas nozzle capable of supporting oxidation reaction sputtering ■ Can process substrates up to a maximum diameter of 1 inch *For more details, please refer to the external link page or feel free to contact us.

• Sputtering Equipment

This product is a CVD device for depositing silicon oxide. It features a compact design that achieves space-saving. The internal surface treatment is electropolishing, and the chamber material is SUS316. Additionally, it is compatible with 3-inch wafers. 【Features】 ■ Deposits silicon oxide ■ Compact design that achieves space-saving ■ Compatible with 3-inch wafers *For more details, please refer to the external link page or feel free to contact us.

• CVD Equipment

This product is a CVD device that allows film formation by introducing a YAG laser from an external viewport, with a sample stage (equipped with an automatic rotation mechanism) located at the center of a high-frequency heating coil. The sample inlet is located on the side of the chamber and can be opened and closed from both sides, making it easy to set the sample. It is also possible to install a gas supply system (up to 5 systems) at the top of the chamber as an option. 【Features】 ■ Film formation can be achieved by introducing a YAG laser from an external viewport ■ The sample inlet is located on the side of the chamber and can be opened and closed from both sides ■ Easy sample setup ■ Option to install a gas supply system (up to 5 systems) at the top *For more details, please refer to the external link page or feel free to contact us.

• CVD Equipment

The "Plasma CVD Device" is a CVD device that has been extremely simplified for experimental use. The mass flow main unit uses manufacturer products. The display and setting devices are custom-made by our company, which helps reduce the price. Additionally, it is equipped with a mechanism that allows the distance between the plasma generation area and the sample to be adjusted by moving the microwave waveguide up and down. 【Features】 ■ Extremely simplified for experimental use ■ Equipped with a mechanism to move the microwave waveguide up and down ■ Sample attachment is interchangeable via a motorized up-and-down mechanism from the bottom ■ Includes a leakage microwave detection device ■ All internal mechanisms are compactly designed to save space *For more details, please refer to the external link page or feel free to contact us.

• CVD Equipment

The "2D Resistance Heating Vapor Deposition Device" is a system that allows for the easy vapor deposition of two materials using resistance heating. The deposition source is of the boat type, and the substrate is mounted on a plate supported by pillars, with adjustable height. The exhaust system utilizes both DP and RP, enabling high vacuum to be achieved in a short time. 【Features】 - The SUS upper chamber is equipped with two CF70 ports and two 50mm windows, while the lower chamber comes standard with six CF70 ports. - The upper chamber has a mechanism for vertical movement powered by electricity. - It comes standard with a film thickness gauge and can also operate in a gas atmosphere. - It allows for the easy vapor deposition of two different materials. *For more details, please refer to the external link page or feel free to contact us.

• Evaporation Equipment

This product is a tabletop high-temperature electric furnace handled by Izumi Tech Co., Ltd., which primarily sells scientific instruments and engages in design and manufacturing. The control method adopts a program-controlled thyristor PID system. It features a door design that allows for easy loading and unloading of samples. We also accept other specifications upon request, so please feel free to contact us. 【Features】 ■ Maximum temperature reach of 1800°C (in air) ■ Capable of rapid heating ■ Door design for easy loading and unloading of samples *For more details, please feel free to contact us.

• Electric furnace