ソーキ List of Products and Services

It is possible to detect pinholes in the insulating coating applied to concrete structures. This has been made possible through non-destructive electrical methods.

• Flaw detection testing

The flow of electricity (conductivity) utilizes the moisture contained in the concrete, so it is essential to check this moisture before conducting pinhole inspections. A simple operation of pressing electrodes against the surface of insulating materials such as resin linings, waterproof sheets, or coatings applied to the concrete substrate allows for checking the moisture content of the concrete layer.

• Flaw detection testing

This speed gun can measure speeds in miles per hour (MPH) and kilometers per hour (KPH).

• Other security and surveillance systems

The corn mirror is adopted, and a 360° laser line is emitted from a single light source. The rotating platform can be removed, allowing for projection at low positions. 【Features】 ■ Projects vertical lines, horizontal lines, and crosshairs with laser lines. ■ Highly visible green laser. ■ Can project lines from 10mm in the inside corner and from 0mm at the outside corner to the wall, making it ideal for construction work. ■ Automatically corrects tilt (X line-E can accommodate tilts of up to ±4°). ■ Accuracy: ±1.5mm/7.5m (alignment). ■ Vertical point accuracy: ±1mm/3m. ■ Right angle accuracy: 90°±0.03°. ■ Dual power supply system with dry batteries and AC adapter.

• Distance measuring device

■Cable length: 60m ■Camera head diameter: φ35mm

• Industrial Endoscope

Cable length: 50m

• Other environmental analysis equipment

【Size】 ■ Camera head: φ40mm ■ Cable: φ6.5mm ■ Cable length: 30m

• Industrial Endoscope

【Size】 ■Cable length: 30m ■Camera head diameter: φ30mm ■Cable diameter: φ6.6mm

• Industrial Endoscope

Cable length: 20m or more

• Other environmental analysis equipment

■Cable length: 1m ■Camera head tip diameter: 17mm

• Industrial Endoscope

Cable length: 10m Camera head size: φ5.5mm

• Industrial Endoscope

Cable length: 100m

• Other environmental analysis equipment

Cable length: 100m

• Other environmental analysis equipment

■Cable length: 1.5m ■Camera head diameter: 6mm

• Industrial Endoscope

By attaching a 28mm diameter, 10m long pipe inspection camera to a dedicated LED light-equipped telescopic pole, high-altitude inspections become possible. 【Features】 ■ It is a high-performance camera that uses durable sapphire glass, has heat resistance from 0 to 60°C, and is equipped with eight high-precision LEDs. ■ It is dustproof, waterproof, and oil-resistant, capable of withstanding water depths of up to 10m. ■ The ultra-wide-angle lens allows for inspection not only at right angles but also from the sides. ■ It supports a focal length range from 10mm to infinity, clearly capturing distant objects, making it suitable for photographing large spaces. ■ Two 90° elbow sections allow for passage (depending on the condition inside the pipe). ■ The included case and shoulder strap secure the main unit, enabling inspections with both hands free. ■ The LED light attached to the telescopic pole can adjust brightness focus according to the application. ■ The telescopic pole can be extended from 1.2m to a maximum of 5m for use.

• Industrial Endoscope

It is a laser sight equipped with a green laser.

• Distance measuring device

When used in conjunction with the Clampro Logger LR5051, the collected data can be transferred to a PC via USB. Measurement data can be stored in the internal memory of this product or on an SD card. 【Features】 ■ Large Capacity Memory All loggers can record up to 60,000 data points. With a recording interval of 1 second, approximately 16 hours of recording is possible, and with a 1-minute interval, about 41 days of recording can be achieved (up to 7 times more than conventional models). ■ Backup Non-volatile memory is used as the recording device for measurement data, protecting recorded data in case of low battery voltage or differences during battery replacement. ■ Alarm Display Function By setting upper and lower limits from the application software, an [AL] mark will be displayed on the LCD if the measurement values fall outside the set range. ■ Statistical Value Recording It is possible to choose between instantaneous value recording or statistical value recording. In the case of instantaneous value recording, measurements are taken at each recording interval, and the measurement values are saved. For statistical value recording, measurements are taken at 1-minute intervals, saving the maximum, minimum, average, and instantaneous values for each recording interval. ■ Application Software The LR5092 comes with a PC application (LR5000 Utility).

• Other measurement, recording and measuring instruments

Since wiring from the camera to the monitor is unnecessary, it is ideal as a backup camera monitor for trailers and container trucks. - This backup camera transmits images wirelessly. - Camera: 340,000 pixels (approx. 100m in good visibility) - Up to two cameras can be registered to one monitor. (Single screen or split-screen display is possible) * Both the camera and monitor require power (12-24V).

• Other security and surveillance systems

The gas concentration and alarm status can be easily understood at a glance, which helps ensure the safety of workers. It has been made smaller and lighter compared to conventional products. 【Features】 ■ Equipped with concentration and alarm display functions ■ Easy maintenance with a magnetic stick Various adjustments such as zero adjustment and span adjustment can be easily performed on-site with just one magnetic stick. ■ Smaller and lighter than conventional products Achieved a smaller size compared to conventional products. The KD-12 is about 1/10 the size (by volume).

• Odor Testing

When a worker approaches from behind heavy machinery that is difficult for the operator to see, ultrasonic waves are used to quickly detect danger. Both parties are alerted with sound and light to avoid hazards. This system aims to reduce the risk of collision accidents. *Please use in conjunction with "Tora Ponta (for vehicles)" (available for separate rental).* ■ Vehicle Warning Device (for vehicles) It receives ultrasonic signals from the responder (vest type) worn by the worker, converts them into electrical signals, and sends them to the warning device. It detects the responder and measures distance, issuing a warning if a worker enters a danger area. ■ Responder (vest type) (for workers) *Available for separate rental. A sensor for sending response signals to ultrasonic signals from the area sensor installed on the heavy machinery is mounted in the inner pocket of the front of the vest. *The detection target is identified as a worker wearing a "responder" (equipment that responds to ultrasonic signals emitted from the construction machinery) near the construction machinery. Structures around the machinery and individuals not wearing a responder are not detected.

• Other security and surveillance systems

When a worker approaches from behind a heavy machine that is difficult for the operator to see, ultrasonic technology is used to quickly detect danger. Alarms are issued with sound and light to both parties to avoid hazards. This system aims to reduce the risk of collision accidents. *Please use it in conjunction with "Tora Ponta (for workers)" (available for separate rental). 【Features】 ■ Vehicle Alarm System (for vehicles) It receives ultrasonic signals from the responder (vest type) worn by the worker, converts them into electrical signals, and sends them to the alarm device. It detects the responder and measures distance, issuing an alarm when a worker enters a danger area. ■ Responder (vest type) (for workers) *Available for separate rental. A sensor for sending response signals to the ultrasonic signals from the area sensor installed on the heavy machine is mounted in the inner pocket of the vest's front. *The detection target is identified as workers wearing the "responder" (equipment that responds to ultrasonic signals emitted from construction machinery) near construction machinery. Structures around the machinery and individuals not wearing the responder are not detected.

• Other security and surveillance systems

Data output can be achieved by using the optional level recorder. The measurement results are displayed on a large LCD screen in an easy-to-read format, with a bar graph spanning a range of 60 dB and numerical values. 【Features】 ■ Measurement Level Range A-weighting: 30 to 130 dB C-weighting: 35 to 130 dB Flat weighting: 40 to 130 dB Frequency measurement: 20 to 8000 Hz (including microphone) ■ Frequency Characteristics: A, C, FLAT ■ Dynamic Characteristics: Fast, Slow ■ Display Cycle: 1 second (digital), 0.1 seconds (bar graph) ■ Power Supply: 2 AA batteries, AC 100V ■ Operating Temperature and Humidity Range: -10 to 50°C, 30 to 90% RH ■ Dimensions: Approximately W80 × D30 × H230 mm ■ Weight: Approximately 300 g (including batteries)

• Noise Inspection

It is possible to measure the ferrite content in austenitic and duplex stainless steels. Ferrite in metals can induce and promote corrosion. Therefore, managing ferrite content is an important issue.

• Flaw detection testing

This is a concrete sieve specifically for wet screening. The HI-300J/330J are included accessories, while the HI-300/330 are optional items.

• Soil testing

Invar Precision Scale

• Distance measuring device

A high-precision anchor tester that supports safety and quality at every site. Its lightweight design allows for easy inspections of high places, ceilings, walls, and floors. It can also quickly measure anchor strength non-destructively. 【Features】 - Ideal for maintenance inspections as it allows for strength verification without damage. - Comes in a handy case for easy portability. - Lightweight, enabling one-person inspections of high places, ceilings, walls, and floors. - Digital display of measurement values. - Consistently provides high-precision measurement results. - Allows for simple measurement of anchor displacement simultaneously.

• Flaw detection testing

It is an aneroid self-recording barometer that amplifies the deformation of a sealed bellows close to a vacuum due to changes in atmospheric pressure and transmits it to a recording pen, which records it on a strip of paper wound around a cylindrical time mechanism.

• Other environmental analysis equipment

While taking analog recordings, depth values can be read simultaneously. By continuously measuring the water depth of rivers, lakes, and ports, it is possible to measure and record the shape of the seabed and lakebed. 【Features】 ■ Measurement Range Analog: From 0.65m to 120m below the transducer (when flat) Digital: From 1.00m to 120m below the transducer (when flat)

• Other environmental analysis equipment

While taking analog recordings, depth values can be read simultaneously. By continuously measuring the water depth of rivers, lakes, and ports, it is possible to measure and record the shape of the seabed and lakebed. 【Features】 ■ Measurement Range Analog: From 0.65m to 100m below the transducer (when flat) Digital: From 1.00m to 100m below the transducer (when flat)

• Other environmental analysis equipment

YI-01 is a lightweight structure building that is used when the impact force is excessive with a standard weight impact source (bang machine) that has impact force characteristics (1). Weighing only 2.5 kg, it is easy to carry, and by dropping it freely from a height of 1 meter, a stable impact force of approximately 1,500 N can be obtained. 【Features】 ■ Lightweight at 2.5 kg and easy to carry ■ Developed for use as a standard weight impact source in accordance with JIS A 1418-2:2000 "Measurement Method for Floor Impact Sound Insulation Performance of Buildings" ■ Designed to ensure no differences in impact force characteristics in any region, taking temperature dependence into account.

• Vibration Testing

This is a Class 2A total station equipped with Windows CE. It comes with an SDR8 civil master as part of the rental specifications. It features a laser pointer and is a non-prism model.

• Distance measuring device

The VM53A consists of a PC-83C (three-directional vibration pickup) and a display unit. It can record three-directional measurement data to internal memory or a memory card (CF card). Additionally, by using the optional management software AS-60VM, data management can be performed on a computer. ■ It features two types of backlit LCD screens, with the large main screen displaying instantaneous values and the sub-screen showing various information such as level-time, bar graphs, and lists. ■ It is capable of continuously recording three-directional instantaneous values to a memory card, although the capacity of a single file is approximately 200 hours. ■ The maximum value, time rate level, and power average calculation results can be continuously stored in internal memory.

• Vibration Testing

The testo 405i is a thermal wire anemometer smart probe that can measure wind speed, wind temperature, and air volume. It is compact and highly portable, and the measurements can be checked on a smartphone or tablet via Bluetooth communication. Additionally, specialized analysis results can be easily obtained through calculation and display functions provided by a dedicated app. 【Features】 ■ Displays measurement values on Android/iOS devices (smartphones and tablets) ■ Connects up to 6 probes to a single device for simultaneous measurements ■ Capable of graphing, saving (Android only), and emailing measurement data ■ Duct information can be set in air volume calculation mode ■ The dedicated app can be downloaded from Google Play and the App Store (free) ■ Wireless probe capable of measuring and recording wind speed and temperature via Bluetooth communication ■ The rod with a scale indicating insertion length is up to 400mm long, can be bent 180°, and allows measurements at any angle.

• Wind Speed/Volume Meter

Equipped with SDR8 Civil Master.

• Distance measuring device

The RI moisture density meter uses trace amounts of radioactive isotopes to measure soil density, moisture content, and other parameters with high precision.

• Soil testing

NST-2 is an ultrasonic depth measurement device that can quickly and easily measure the embedment depth of guardrail posts, road sign posts, protective shelf posts, lighting poles, and more.

• Flaw detection testing

The HI-300J/330J is an accessory, while the HI-300/330 is an optional item.

• Soil testing

Using signal processing techniques with DSP, we generate white noise/pink noise from M-sequence pseudo-random noise and create band noise using a 1/1 octave filter. Output frequency range: White noise/pink noise bandwidth 20Hz to 20kHz.

• Vibration Testing

Applying signal processing techniques using DSP, we generate white noise/pink noise from M-sequence pseudo-random noise and create band noise using a 1/1 octave filter. Output frequency range: white noise/pink noise bandwidth 20Hz to 20kHz.

• Vibration Testing

It is ideal for leak testing of CO2 fire extinguishing equipment, confirming entry after the operation of CO2 fire extinguishing equipment, and detecting exhaust gas leaks from combustion appliances in general households. 【Features】 ■ Compact and lightweight (approximately 500g) ■ Equipped with automatic lighting and alarm functions ■ External output signal (0-1V linear) ■ Peak value and average value calculation functions included

• Odor Testing

It is a three-component ultra-small seismograph. The waveform data of the three components can be displayed on an LCD screen.

• Soil testing

Records the level difference between two locations for two units simultaneously with one device. It can set eight types of recording paper speeds from 0.01 to 30 mm/sec. 【Features】 ■ Compact and lightweight. ■ Recording mode is independent for each channel. ■ Has equivalent dynamic characteristics (response of the pointer and pen) to sound level meters and vibration level meters (exponential response type). ■ Wide frequency range from 1 Hz to 20 kHz. ■ Level difference recording is possible (Channel A mode). ■ Can operate paper feed in the rewind direction. ■ When the recording paper runs out, the paper feed and pen operation stop. ■ Equipped with a light for nighttime measurements. ■ Recording range of 50 dB (level) and 50 mm (voltage). ■ Eight types of recording paper speeds from 0.01 to 30 mm/sec.

• Vibration Testing

Not only between the two parties (A and B), but there is also a function for a third person (C) to listen to the conversation between A and B (monitoring mode). 【Features】 ■ Fully compatible with the expansion and addition of existing specific low-power transceivers ■ Simple operation simultaneous communication method that allows hands-free contact ■ Ultra-lightweight and compact design that does not get in the way when placed in a pocket ■ Comes standard with a large-capacity lithium battery that can be recharged repeatedly + dedicated charger ■ Equipped with a monitoring mode that allows you to check the work situation ■ Automatic switching function for communication channels A/B and automatic line connection function ■ Key lock function to prevent accidental operation ■ Auto power off function that automatically turns off the power to prevent forgetting to turn it off ■ Power save function that reduces battery consumption during standby ■ Secret communication function to prevent others from overhearing the conversation

• Other security and surveillance systems

It is a light meter capable of measuring up to 20,000 lux.

• Optical Measuring Instruments

It can measure coatings of both magnetic and non-magnetic metals with a single unit. Additionally, data can be transmitted to a PC using the included software and USB cable. ■Measurement range: 0 to 2,000μm

• Coating thickness gauge