ウィンテクノ List of Products and Services

EA-151D Wall-Mounted Fixed Arm is a monitor arm product designed for mounting on walls or vertical surfaces, allowing for horizontal and vertical movement. Depending on the difference in gas springs, you can choose from two products. After installation, you can adjust the position of the screen back and forth, as well as up and down, and side to side. (Photo 3) Model Number: EA-151D Load Capacity: 3–8KG Model Number: EA-151WD Load Capacity: 1.5–4KG

• Office furniture
• Other machine elements
• Other PCs and OA equipment

The LA-50 series horizontal multi-joint arm is an LCD monitor arm that can accommodate various installation environments by combining standardized parts. It can move freely in all directions in the horizontal space. In the vertical direction, it can be moved to any position on the support column (except for LA-55**). The product has a load capacity of up to 8KG or 12KG, and it is designed for monitors around 24 inches in size. *When installing the equipment, please ensure that the arm is installed and used in a level position. *The load capacity is based on the weight of a typical PC monitor; installation may not be possible even within the load capacity range due to monitor thickness or weight balance. *Each product requires assembly by the customer. *The product is manufactured by Modern Solid (MODERNSOLID).

• Other machine elements
• Other PCs and OA equipment
• furniture

The PA-10AX support stand is a post that is fixed to the desk surface with a clamp, while the PA-10DX is a post that is fixed to a horizontal surface (such as on the desk) with screws. The height of the post is approximately 600mm, allowing for the possibility of arranging monitors in two tiers by preparing two separately sold arms. The separately sold dedicated arms can be selected from four types depending on the movement method and the conditions of the mounted monitors. The keyboard arm KA-01A can be used, allowing for a configuration of monitor + keyboard arm. *For details, please check the product information separately. *The product is manufactured by Modern Solid (MODERNSOLID).

• Other machine elements
• Other PCs and OA equipment
• furniture

It will be mounted on the side of the square aluminum frame, and the models differ in vertical and horizontal directions. The screws used for fixing are M6 (one or two points on each side) and M8 (one point on each side). * Assembly by the customer is required for the product. * Please confirm in advance that the screw pitch matches the frame. * For installation examples, please refer to photos 7 and 8 below. * Please prepare the nuts for the receiving side separately. * The monitor shown in the photos is sold separately.

• Other machine elements
• furniture
• Other PCs and OA equipment

The square frame will be mounted on the top and sides; for side mounting, the models differ in vertical and horizontal orientations. The screws used for fixing are M6 (one or two points on each side) and M8 (one point on each side). *Please confirm in advance that the screw pitch matches the frame. *Please prepare the nuts for the receiving side separately.

• Other machine elements
• Other PCs and OA equipment
• furniture

This is a simple PC stand equipped with a monitor arm, keyboard arm, and PC holder, featuring aluminum support columns and caster-equipped legs. The PA-23D series has a total height of approximately 1850mm for standing work, while the PA-24D series has a total height of about 1350mm for seated work, offering two configurations. The monitor arms have different weight capacities and mobility options depending on the lineup, allowing for selection. The total weight capacity on the support side is up to 30KG; when calculating the load, please include the weight of the monitor arm, keyboard arm, and any options before checking the equipment weight. The keyboard arm can be folded for movement or storage. Optional parts such as weights and handles are available. It can also be used as a simple monitor stand without the keyboard arm. *The product is manufactured by Modern Solid (MODERNSOLID). *Assembly by the customer is required for this product. *Please check the link for product details.

• Other machine elements
• Office furniture
• furniture

- This is a large arm that can extend 1800mm, fixed to high-strength wall and ceiling surfaces. - The expected monitor size for installation is 26 inches*, and the forearm joint moves up and down using a gas spring. - Wiring can be routed through the arm, allowing for use without compromising the appearance after installation. - The lineup is divided based on the load capacity of the arm. - Other wall-mounted arms include the HA-501, which incorporates gas springs in the front and rear joints, and the HA-625, designed for lighter loads with a size limited to 1400mm. *The product is manufactured by Modern Solid (MODERNSOLID).

• Other machine elements
• Stand and other options
• Other PCs and OA equipment

◆The LA-XXG series is a compact arm that is mounted on the wall by inserting the arm into the groove of a plate pre-installed on the wall. ◆The LA-XXL series is a compact arm that is fixed to the wall using a box-shaped mounting bracket secured with screws. ◆It complies with VESA standards and can accommodate LCD monitors with mounting holes at 75×75mm pitch and 100×100mm pitch (excluding LA-19). ◆The weight capacity is as follows: LA-19 is 6KG, LA-16G/L is less than 8KG, LA-17G/L is less than 8KG, LA-18G/L is less than 6KG, and LA-37G/L is less than 14KG*. ◆By turning the adjustment nut inside the joint cover, you can adjust the balance of the weight capacity. ◆Each product does not include screws for fixing the wall-side bracket; please prepare them according to your installation environment. Note: The photo shows the LA-17G equipped with a VESA conversion adapter; please check the catalog for other model numbers. *The weight capacity assumes a monitor thickness of less than 55mm and a general PC monitor with the center of gravity located in the middle.

• Office furniture
• Desktop PC
• Other machine elements

◆It is compatible with the VESA standard and can mount LCD monitors or TVs with mounting holes spaced 75x75mm or 100x100mm. The weight capacity is up to 6kg*. (For the 100x100mm configuration, use the included conversion adapter.) ◆It has a 5-axis joint, allowing you to freely adjust the position and angle of the screen. The angle adjustment at the base of the arm is fixed in 30-degree increments using a dial. ◆The installation method is a clamp type, which can be mounted on tables with a thickness of 15mm to 100mm. ◆The underside of the arm features a simple cable management area, making it easy to store cables. *The weight capacity assumes a monitor thickness of less than 55mm and a center of gravity located in the middle, typical for standard PC monitors.

• Desktop PC
• Office furniture
• Other machine elements

The "ED Series" is a stylish and luxurious horizontal and vertical multi-joint arm. It is compatible with monitors up to 26 inches (supports VESA 75x75 and 100x100). It features a gas spring mechanism that allows for smooth movement, creating a comfortable working environment. Additionally, each arm moves independently, allowing you to position the monitor in your preferred location. 【Features】 ■ Compatible with monitors up to 26 inches ■ Can be installed on tabletops ranging from 15 to 100mm ■ Utilizes a gas spring mechanism for smooth movement ■ Creates a comfortable working environment ■ Allows for positioning the monitor in your preferred location ■ Can be changed to screw fixation or grommet fixation (additional cost) *For more details, please refer to the PDF document or feel free to contact us.

• Desktop PC
• Display
• Office furniture

The "HA-157-M20HK-Xmm" is a long arm for ceiling mounting existing anchors that can be cut to fit the site. It can be installed using M20 anchor bolts. It features a built-in gas spring for smooth movement. Additionally, it can be manufactured to match existing bolt pitches and can be installed without any discomfort against the ceiling surface. 【Features】 ■ Compatible with VESA 75×75 and 100×100 ■ Monitor cables can be stored inside the arm ■ Can cut the support pole to fit the site ■ Can be installed using M20 anchor bolts ■ Smooth movement due to the built-in gas spring *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "LA-10AC" is a mounting bracket that allows for easy installation on the wall by inserting the monitor-side bracket into the wall plate. It supports screw holes with a pitch of 75mm x 75mm and 100mm x 100mm, in accordance with VESA standards. The distance from the wall to the back of the screen is 25.5mm, allowing for installation close to the wall. Additionally, we also offer the "PW-51-8," which allows for height and depth adjustments after multi-monitor installation. 【Features】 ■ Easy wall installation ■ Supports screw holes with a pitch of 75mm x 75mm and 100mm x 100mm in accordance with VESA standards ■ Can be installed close to the wall ■ The load capacity of the bracket itself is 20KG *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other PCs and OA equipment
• furniture

The "LA-50 Series" is an LCD monitor arm that can accommodate many mounting applications by combining standardized parts. It can move freely in all directions in the horizontal space. In the vertical direction, it can be adjusted to any position along the support pole (except for LA-55 and LA-56). It is also possible to mount multiple monitors on a single support pole, making it suitable for environments where many monitors need to be set up in a limited space. Additionally, we offer a white model with a design based on a white color scheme. 【Features】 ■ Load capacity of up to 12 kg ■ Uses a highly rigid arm cross-section structure and aluminum alloy material ■ Provides smooth movement even under high loads ■ Compatible with many mounting applications ■ Can move freely in all directions in the horizontal space *For more details, please refer to the PDF document or feel free to contact us.

• Office furniture
• Other machine elements
• Desktop PC

At Wintechno Co., Ltd., we handle "Horizontal and Vertical Multi-Joint Arms." Our lineup includes the "EA-211," which features a built-in gas spring for smooth movement, as well as the "EA-111D" and "LA-911," which have a simple design that does not compromise the appearance of the installation location. You can choose according to your application. 【Partial Lineup】 ■EA-211 ■LA-911 ■EA-111WD ■EA-111D ■EA-151WD, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Workstation
• Semiconductor inspection/test equipment
• Desktop PC

This catalog is the product catalog of Wintechno Co., Ltd., which sells arms for LCD monitors. You can choose from a wide range of products, including the gas spring long arm and wall-mounted "HA series," mobile medical carts, and horizontal and vertical multi-joint arms. [Contents] - HA Series - HM Series - Mobile Medical Carts - Tablet Solutions - Horizontal and Vertical Multi-Joint Arms *For more details, please download the PDF or contact us.

• Other appearance and image inspection equipment
• Desktop PC
• Other machine elements