ミヤガワ金属販売 List of Products and Services

The "CX095-65" is a drill screw that can be driven into 28mm ultra-thick steel plates without pre-drilling. It allows for joining and renovation work in environments where open flames are prohibited. We can recommend our original stainless steel brand according to your usage environment and application, so please feel free to contact us. 【Features】 ■ Enables joining and renovation work in environments where open flames are prohibited ■ Suitable for fastening steel plates (with pre-drilling) and ultra-thick steel plates (maximum flange thickness of 28mm) ■ A groundbreaking drill screw made possible by our excellent drill screw manufacturing technology ■ Various materials can be selected *For more details, please refer to the PDF document or feel free to contact us.

• bolt

Miyagawa Metal Sales Co., Ltd. handles faucet parts such as "washers and one washers." We pay attention to the finishing on the back side and provide careful finishing. We also offer various parts such as strainers used for sink and bath drains, as well as other types of parts. We can manufacture according to your requests. Please feel free to contact us. 【Product Lineup】 ■ Outer Diameter 60 Series ■ Outer Diameter 64 Series *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• others

Our "MRX" has successfully passed the salt spray test conducted by a certain unit bath manufacturer and has been adopted. It is used for the installation of internal components in unit baths. Bathrooms are particularly prone to rust, but our product has successfully met those conditions. Rust does not belong in a clean unit bath. Since this involves penetrating thin steel plates, it is designed with pointed screws. *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• stainless

Here is a case study of our "MRX Drill Screw" being used on the roof of a bicycle parking area in a condominium. The roof of the parking lot can be seen from the upper floors. In this condominium, rust had developed at the screw parts of the bicycle parking roof, resulting in noticeable brown stains that detracted from its appearance. By replacing the screws with the rust-resistant "MRX Drill Screw," we were able to reduce the occurrence of stains and solve the issue. Additionally, the speed of installation for the components increased, allowing for more efficient work. [Case Study] ■ Before Implementation - Rust developed at the screw parts of the bicycle parking roof - Noticeable brown stains, poor appearance ■ After Implementation - Reduced occurrence of stains *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• stainless

Introducing our proud lineup of diverse original products at Miyagawa! Careful consideration of materials, surface treatment, appearance, and usage environment is essential when selecting screws. The original products we offer are capable of meeting various environments and needs, including corrosion resistance, SCC resistance, strength, and hardness. <Original Products> ■ GRX Drill Screw ■ FRX Drill Screw *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• bolt

In response to the frequent typhoon damage occurring these days, the use of stronger and harder materials (high-strength materials) than conventional piping materials has been increasing. As a result, more force is required to fasten materials with traditional drill screws, leading to longer fastening times. Amidst this, our original product, the 'GRX Drill Screw,' can fasten even hard materials such as high-strength materials, making construction easier and reducing construction time. We have received positive feedback about this. 【Features】 ■ Drill screws for high-strength steel ■ High corrosion resistance ■ Easily penetrates plates up to 12mm thick 【Construction Examples】 ■ Round pipes for general gardening facilities SS400 materials such as φ25mm with a thickness of 1.2mm and φ31.8mm with a thickness of 1.6mm ■ High-tensile materials (Type 700) used in videos φ32mm with a thickness of 2.0mm and joint material electrical conduit G22 (φ26.5mm with a thickness of 2.3mm) ★ We will be exhibiting at the Architecture and Building Materials Exhibition held at Tokyo Big Sight starting March 3, 2020. *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• bolt

"Bolts are prone to rust." Are you giving up with that thought? We have good news for such customers. Miyagawa Metal Sales specializes in stainless steel screws. Our company offers the MRX stainless drill screw, a remarkable drill screw boasting exceptional corrosion resistance developed uniquely by Miyagawa. In addition, the FRX drill screw has achieved excellent cost performance through years of technology and experience. It's definitely worth trying at least once! ★ We will give samples to 10 selected companies ★ ★ Those who receive samples will also receive a special original novelty item from Miyagawa Metal ★ 【Features】 ■ Penetrates a 12mm thick steel plate in about 10 seconds ■ Martensitic type ■ Exceptional cutting performance with high-speed drill speed for comfortable and labor-saving work ■ Total cost reduction with durable MRX ■ Adaptable to harsh environments ■ Non-plated with corrosion resistance equivalent to A2 (SUS 304 series) *We have introduced [case studies] at the URL below. If you would like a sample, please contact us through the inquiry form! For more details, please download the PDF or feel free to contact us.

• others

The "STS6.5・F Series" is a high-quality hardware approved by the Japan Housing and Wood Technology Center, ensuring safety and reliability. It allows for the fastening of engineered wood such as laminated timber without the use of connecting hardware. It features an environmentally friendly surface treatment called ZICOLLUMTM, which is resistant to rust. It is manufactured in certified factories under strict quality control. 【Features】 ■ Certified by the Japan Housing and Wood Technology Center ■ Z-mark connecting hardware (Approval number 129-1) ■ Allows for fastening of engineered wood without the use of connecting hardware ■ High quality made in Japan ■ Surface treatment using ZICOLLUM ■ Manufactured in certified factories *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

Our company manufactures long screws with a maximum nominal diameter of 8mm and a maximum nominal length of 400mm using our unique dedicated machines. Thanks to our high technical capabilities that maintain high quality, we can adapt to various needs, and the shapes and materials of recesses, heads, and screw tips can also be customized. Depending on the usage environment and application, we propose Miyagawa's original stainless steel brand. Please feel free to contact us. 【Features】 ■ High technical capabilities that maintain high quality ■ Miyagawa's unique dedicated machines ■ Long screws with a maximum nominal diameter of 8mm and a maximum nominal length of 400mm ■ Customizable shapes and materials ■ High quality made in Japan ■ Various materials available for selection *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

"Deck screws" prevent burr formation due to their special screw head shape. Since pre-drilling and countersinking are unnecessary, work efficiency is improved, leading to reduced construction time and cost savings. They are suitable for fastening hard decking materials (such as Jarrah, Ipe, and Ulin) and steel joists (1.6mm thick). 【Features】 - No pre-drilling or countersinking required - Prevents burr formation due to special screw head shape - Improved work efficiency leads to reduced construction time and cost savings - Various materials available for selection - Ideal for fastening hard decking materials *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

"Code Rex" is a drill screw that combines square and cross holes to eliminate cam-out, which can cause work delays. It features a square No.2 bit hole that is long-lasting and compatible with high-power drivers. This design allows for smooth work in hard-to-reach and difficult-to-hit areas. Aftercare can be done with a regular cross screwdriver. This improves work efficiency and achieves cost reduction through shortened construction periods. 【Features】 ■ Adopts a square No.2 bit hole that is long-lasting and compatible with high-power drivers (Note: SRWQ63 and FRWQ63 use square No.3) ■ Increases work efficiency, shortens construction time, and reduces costs ■ Prevents screws from falling during installation ■ Makes installation in difficult high-altitude sites easy ■ Hybrid of square and cross holes *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

"SRX" is a drill screw made of austenitic stainless steel that is strong in harsh environments, designed to be driven into general structural steel. With this durable product, you can achieve total cost reduction. It offers high corrosion resistance comparable to standard A2 (SUS304) products, making it suitable for harsh environments. Additionally, it enables drilling into thin sheets of general structural steel, which is difficult with A2 (SUS304) products. 【Features】 ■ Made of austenitic stainless steel ■ Capable of drilling into thin sheets of general structural steel ■ Adaptable to harsh environments ■ High corrosion resistance comparable to standard A2 (SUS304) products *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FRX" is a drill screw uniquely developed by Miyagawa that inherits the astonishing sharpness achieved by the "MRX," while being offered at a relatively low cost. Through a consistent manufacturing system that includes design tailored to purpose, production of molds and tools, heat treatment, and quality control inspections, we achieve excellent cost performance. We offer a lineup that includes "FRX-S," a stainless steel product with corrosion resistance and workability that surpasses typical SUS410 products, as well as "FRX-F," made of iron/trivalent zinc. 【Features】 ■ Inherits the astonishing sharpness achieved by the "MRX" ■ Available at a relatively low cost ■ Consistent manufacturing system including design tailored to purpose, production of molds and tools, heat treatment, and quality control inspections ■ Achieves excellent cost performance *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

This document introduces the types and characteristics of surface treatments for screws and bolts handled by Miyagawa Metal Sales Co., Ltd. It provides detailed explanations of the appearance and composition of surface treatments, as well as the properties and main applications of stainless steel. Our company keeps a wide variety of drill screws in stock to meet your needs. Please feel free to consult us for urgent orders. [Contents] ■ Types and characteristics of surface treatments ■ Properties and main applications of stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Surface treatment contract service

"Barrister" is a stainless steel drill screw developed to provide holding power to aluminum thin plates, making them fastenable. With outstanding torsional strength and holding power, it achieves efficient workability and speed of screwing in. Additionally, it demonstrates high corrosion resistance and durability even in the harshest environments. Depending on the usage environment and application, we will propose Miyagawa's original stainless steel brand. Please feel free to contact us. 【Features】 ■ Exhibits remarkable holding power against aluminum thin plates through unique technology ■ Efficient workability reduces construction time ■ Proposals available with materials suited to conditions *For more details, please refer to the PDF materials or feel free to contact us.

• bolt

"Stud screws" are non-weld screws handled by Miyagawa Metal Sales Co., Ltd. Compared to welding, they are less affected by weather conditions, making process management easier. They can also be used for joint repairs and construction in environments where the use of open flames is prohibited. Additionally, they help prevent health hazards to workers from electric shock and gases. Depending on the usage environment and application, we will propose Miyagawa's original stainless steel brand. Please feel free to contact us. 【Features】 ■ Easier process management as they are less affected by weather compared to welding ■ Possible for joint repairs and construction in environments where open flames are prohibited ■ Prevention of health hazards to workers from electric shock and gases ■ Contributes to reducing carbon dioxide emissions on site compared to welding ■ Various materials can be selected *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "MRX" is a martensitic high-strength stainless steel drill screw that has corrosion resistance equivalent to SUS304 without plating. It has a high holding power against the counterpart material and is resistant to rust, which can reduce maintenance efforts such as replacements. It is also suitable for use in harsh environments. *Currently, related materials are being distributed. We are showcasing the results of salt spray, sulfur dioxide gas, and outdoor exposure tests conducted by our company, comparing them with SUS304 and SUS410, through photographs. (For detailed information, please refer to the download button.)

• others

In the case of drill screws, drilling into stainless steel plates, which has been considered difficult until now, is made possible by the "GRX drill screw" due to its excellent corrosion resistance. We believe this groundbreaking product will be expected to perform well in various locations by fastening harder materials more easily. 【Features】 ● Enables drilling into stainless steel plates (austenitic type) where it was difficult with iron and SUS410 series drill screws. ● Adapts to harsh environments (high corrosion resistance equivalent to general A2 <SUS 304> products). Material: Martensitic special stainless steel Applications: Locations where maintenance is difficult, plants that should avoid operational failure due to aging deterioration, kitchen equipment, etc. *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• bolt

This catalog introduces the drill screws handled by Miyagawa Metal Sales. It features a wide range of our original products, including iron and unichrome drill screws "FRX-F," stainless steel drill screws "FRX-S," and special stainless steel drill screws "MRX." We are continuously introducing products that can meet various environments and needs, with features such as corrosion resistance, SCC resistance, strength, and hardness. Please make use of this for selecting products. [Contents] ■FRX-F ■FRX-S ■MRX ■GRX ■FRX-N *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• bolt