イチネンケミカルズ List of Products and Services

"Icoat ET/Icoat UT" is a solvent-based resin paint. We offer a two-component epoxy paint "Icoat ET," which excels in adhesion, water resistance, oil resistance, and abrasion resistance, as well as a two-component urethane resin paint "Icoat UT," which is superior in gloss, durability, and chemical resistance. Please feel free to consult us for anything from floor repairs to Icoat application. 【Icoat ET Specifications】 ■ Content: 15kg ■ Mixing ratio: 4:1 ■ Standard application amount: 0.2kg/m2 ■ Coverage area: 70-80m2 *For more details, please refer to the PDF materials or feel free to contact us.

Is the factory floor deteriorating due to tire marks and oil stains from vehicle traffic? "Aikoat WAUT-CLEAR" protects new floors or freshly painted surfaces from scratches and dirt by applying a coat. Being water-based, it has a low odor while offering excellent abrasion resistance and dirt-repellent properties. Extending the repainting interval leads to savings in costs and time for construction in the medium to long term. [Features] - Prevents scratches and dirt from forklift traffic. It can be directly painted on tiles or concrete substrates, preventing oil infiltration. - Makes it difficult for scratches and dirt from vehicle traffic to adhere, maintaining the gloss of the paint film for aesthetic appeal. - Excellent workability, allowing forklift traffic 8 hours after application (at 23°C). - UV cut function! Prevents discoloration of the paint film (effectiveness is achieved by applying multiple coats). ☆ Special sale from December 1 to 31! ☆ Receive a set of 5 painting supplies as a gift when you purchase one or more sets of floor paint! Gift contents: 1 small roller brush, 1 large handle, 1 large roller brush, 1 small handle, and 1 scraper. For details, please refer to the catalog.

"Aikoat EFR" is a two-component epoxy resin paint that can be directly applied over a one-component acrylic coating, and due to its excellent leveling properties, it can be applied thickly using rollers or brushes. Even when old coatings remain, it can achieve a beautiful finish without the need for a primer. It can be applied with rollers or brushes, making it easy for in-house application. Additionally, it has excellent leveling properties, resulting in a flat finish on uneven surfaces. 【Features】 ■ Achieves a beautiful finish without the need for a primer, even when old coatings remain ■ Can be applied with rollers or brushes ■ Easy for in-house application ■ Excellent leveling properties ■ Flattens uneven surfaces *For more details, please refer to the PDF document or feel free to contact us.

"Aikoat UF" is a two-component polyurethane resin that is easy to handle and features elasticity, providing a soft walking sensation. It is slip-resistant and safe, and can also be used for repair filling of joints and other areas. Additionally, the curing time for the topcoat and the time until light foot traffic is allowed is over 18 hours at 20°C, and during winter, 2-3% thinner can be mixed in. 【Features】 ■ Provides a soft walking sensation due to its elasticity ■ Slip-resistant and safe ■ Usable for repair filling of joints and other areas *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our epoxy resin-based antistatic flooring, "iCoat CEF." It complies with the conductivity standards of N.F.P.A., making it suitable for preventing ignition and explosion due to static electricity. It can be used in electronic component factories, clean rooms, as well as printing and painting factories. Please feel free to consult us for anything from floor repairs to iCoat installation. 【Features】 ■ Antistatic flooring ■ Suitable for preventing ignition and explosion due to static electricity ■ Complies with the conductivity standards of N.F.P.A. *For more details, please refer to the PDF materials or feel free to contact us.

"Icoat WET" is a water-based resin paint that has low odor due to its water-based nature. It can be applied safely with consideration for the environment. It can be used in general factories, offices, and basements where solvents cannot be used. Additionally, the substrate concrete must be cleaned of oil, paint, etc., before use. Mix this product in a 1:1 ratio using a stirrer or similar tool, and dilute with 30% water based on the amount mixed. [Features] - Low odor due to being water-based - Can be applied safely with consideration for the environment - Usable in general factories, offices, and basements where solvents cannot be used *For more details, please refer to the PDF document or feel free to contact us.

The "Icoat WE Primer" is a low-odor, environmentally friendly two-component water-based epoxy resin paint. It can be applied over acrylic, epoxy, and urethane paints. If the adhesion between the substrate and the old paint film is insufficient, there is a possibility of peeling after curing, so please remove any easily peelable old paint film before applying the topcoat. 【Features】 ■ Low odor ■ Environmentally friendly ■ Can be applied over acrylic, epoxy, and urethane paints *For more details, please refer to the PDF materials or feel free to contact us.

The "Icoat WPUH" is a polyurethane resin coating that excels in durability and abrasion resistance against heavy traffic such as AGVs. Results from a tire skid test, where wheels were rotated 10,000 times in the same spot, confirmed minimal wear and excellent durability. It is also reliable for unmanned transport vehicles that constantly run in the same location. 【Features】 ■ Excellent durability and abrasion resistance against heavy traffic ■ Reliable for constant travel in the same location ■ No damage even after dropping a 1kg steel ball from a height of 1m, 30 times *For more details, please refer to the PDF document or feel free to contact us.

We handle "Aicoat Quick-Drying Repair Material S." The application method uses a trowel, and no mixing machine is required. It can fill uneven holes and repair steps. Since it is a quick-drying type, it can be operational about one hour after application (at a temperature of 20°C). Please feel free to consult us for floor repairs and Aicoat installation. 【Construction Procedure】 <Items to prepare: gloves, mask, tape, trowel> ■1. Pre-treatment: Remove moisture, oil, and debris using a cloth and detergent. ■2. Liquid mixing: Cut the top of the bag and pour in the resin. ■3. Mixing: Knead well for about 1 to 2 minutes. ■4. Application (Construction): Use a trowel to press down to avoid gaps. *For more details, please refer to the PDF document or feel free to contact us.

The "Icoat Repair Material" is a solvent-free epoxy resin. The "Concrete Type" is suitable for filling holes in concrete and can repair uneven surfaces. It has excellent adhesion due to the use of epoxy resin. Additionally, the "Fast-Drying Asphalt Type" allows for operation approximately one hour after application due to its fast-drying nature. No mixing machine is required. 【Specifications for Concrete Type】 ■ Resin only EMH: Main agent 10kg + Hardener 5kg ■ Repair Material for Concrete: Main agent 2kg + Hardener 1kg + Silica sand 10kg *For more details, please refer to the PDF document or feel free to contact us.

We introduce our "in-house construction painting supplies" suitable for "i-coat." Our lineup includes the 4-inch "roller brush (small)," the 9-inch "roller brush (large, white)," the 9-inch "roller brush (large, yellow)," and the approximately 360mm long "regular roller handle." Feel free to consult us for anything from floor repairs to i-coat application. 【Lineup (excerpt)】 ■ Roller brush (small) ■ Roller brush (large, white) ■ Roller brush (small, yellow) ■ Roller brush (large, yellow) ■ Roller brush (small, white) *For more details, please refer to the PDF materials or feel free to contact us.

"Icoat WAUT-CLEAR" protects new floors and freshly painted surfaces from scratches and dirt by applying a coat. Being water-based, it has a low odor while excelling in abrasion resistance and dirt-repellent properties. Extending the repainting cycle leads to savings in costs and time for construction in the medium to long term. 【Features】 ■ Prevents scratches and dirt from forklift traffic and other vehicles. It can be directly applied to tiles and concrete surfaces, preventing oil infiltration. ■ It is difficult for scratches and dirt from vehicle traffic to adhere, and the gloss of the coating surface is maintained, preserving aesthetics. ■ Excellent workability allows forklift operation just 8 hours after application (at 23°C). ■ UV cut function included! Prevents discoloration of the coating (effectiveness is achieved by applying multiple layers). For more details, please refer to the PDF catalog.