シリコーンテクノ List of Products and Services

"Conductive silicone rubber" has conductivity by incorporating carbon and other materials into silicone rubber, which is an insulator, while maintaining elasticity. Depending on the intended use, it is possible to select hardness and resistance values. It is effective in preventing static electricity and can be added to electronic components that require anti-static measures, mats for workbenches on manufacturing lines, and parts materials such as CCD packings and LED masks that require dust prevention, thus providing expected benefits. 【Features】 ■ Maintains elasticity while having conductivity ■ Hardness and resistance values can be selected according to the intended use ■ Effective in preventing static electricity *For more details, please refer to the PDF materials or feel free to contact us.

• Rubber
• Contract manufacturing

The "LSR Series" is a super high transparency liquid silicone rubber. It provides a good solution for the material considerations of optical components such as lenses and light guide parts that require optical transparency and durability (heat resistance, UV resistance). We offer a wide range of products, starting with "LSR 05" with a hardness of 5 degrees, and including "LSR 90" with a hardness of 90 degrees. 【Features】 ■ Super high transparency (transmittance over 94%) ■ Low haze, resistant to discoloration ■ Excellent durability (heat resistance, UV resistance) ■ High productivity through injection molding ■ Capable of molding complex shapes *For more details, please refer to the PDF materials or feel free to contact us.

• Rubber
• Contract manufacturing

Due to the properties of silicone rubber, there is a tendency for adhesives and double-sided tape to have weak adhesion. Our "Pericon" enables strong adhesion to films by treating the silicone rubber, and by adding decoration to the film and applying double-sided tape, it becomes an impact-absorbing product suitable for various applications. As it is a seal type, it can be applied to the necessary areas. 【Features】 ■ Strong adhesion to films ■ Becomes an impact-absorbing product suitable for various applications by adding decoration to the film and applying double-sided tape ■ Seal type ■ Can be applied to the necessary areas *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• Contract manufacturing

To produce general silicone rubber products, silicone rubber must be molded at a high temperature of 180°C due to its thermosetting nature. Therefore, the molds need to be made from metals that can withstand high temperatures. Cutting processes take time, which naturally increases the usage time of the processing machines, resulting in significantly higher production costs. The typical lead time for producing a single mold is 1 to 2 weeks. In response to the demand for "faster and cheaper mold production," we have made it possible to use resin-based prototype molds. By switching the mold material from metal to resin, we can significantly reduce the time required for cutting processes, which in turn decreases the usage time of processing machines, leading to a substantial reduction in production costs. 【Features】 - Significant reduction in initial costs by changing the mold material from metal to resin - Quick delivery of prototype products - The material used for the prototype products is only silicone rubber - Surface coating treatment is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Prototype Services
• Resin mold

General silicone rubber has weak tear strength, and once cracks occur, it tends to tear easily from there. Therefore, we reviewed the materials and successfully developed a material with improved tear strength. 'FK-Strong' is a reinforced silicone rubber that can also be surface coated. It has strong electrostatic properties and tends to attract dust, but by making the product surface textured or applying a coating, it becomes less prone to dust accumulation and also improves the tactile feel. 【Features】 ■ Suitable for products that come into direct contact with skin, as it is used in medical and food applications ■ Does not undergo hydrolysis, allowing for long-term use ■ Surface coating is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• Contract manufacturing

The "keypad/key sheet" is mainly used in the switch components of equipment input parts. The "keypad" utilizes rubber material, allowing for a click sensation that takes advantage of the rebound properties of rubber. To maximize the use of rubber characteristics, various designs are applied to the key shape, enabling production according to desired specifications for key stroke and click sensation. Additionally, the "key sheet" allows for a thinner design by using film sheets instead of rubber, and its sheet structure on the surface also enables waterproof specifications. 【Keypad Features】 ■ The use of rubber material provides a click sensation that utilizes the rebound properties of rubber. ■ Various designs are applied to the key shape to maximize the use of rubber characteristics. ■ Production is possible according to desired specifications for key stroke and click sensation. *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

Medical-grade silicone adhesives can be used for a wide range of healthcare applications, including "artificial prosthetics" and "fixation and adhesion of medical devices." We offer soft skin adhesive "SIT-SS," which can use untreated polyethylene film as a release liner, and pressure-sensitive adhesive "SIT-PS," designed to secure medical device components to the body. 【Soft Skin Adhesive Features】 ■ Low release force, causing no damage or pain to wounds ■ Easy to reposition ■ Optically clear adhesive ■ Easy to handle *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• glue

"FK-S" is a silicone rubber surface modification coating agent that excels in release properties and prevents adhesion. It also maintains its characteristics in reliability tests for environmental resistance, chemical resistance, and oil resistance. Through the development of unique coating technology and materials, we have significantly improved the release properties, slip properties, wear resistance, and water repellency of silicone rubber, making it widely adopted in fields such as mobile phones, where high wear resistance and water repellency are required. 【Features】 ■ Provides dry slip ■ Matte finish ■ Excellent heat resistance ■ Superior release properties, preventing adhesion ■ Provides water repellency *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

"FK-F" is a coating agent made from fluorine and glass-based materials. By combining a glass-based film with ultra-fine particle fluorine resin, it forms an excellent dry film. It is a room temperature curing type, making it suitable for coating large molded products. 【Features】 ■ Excellent followability ■ Strong adhesion ■ Excellent slip properties ■ Room temperature curing type ■ Suitable for coating large molded products *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

Here are some examples of prototypes we would like to introduce. Recently, customers can easily confirm shapes using 3D printers and light curing technologies, but due to the rubber-like nature of the materials, there are cases where issues arise because they differ from the materials used in mass production (physical properties). In such cases, we offer low-cost prototype molds made of aluminum. By using aluminum molds, the same rubber materials used in mass production can be employed, allowing for various verification tests such as fitting and durability. Additionally, our website features examples of "development support cases" as well as "joint development cases." Please take a look. [Prototype Examples] ■ Iron mold (S50C) ■ Aluminum mold (A2017) ■ Casting (acrylic resin) ■ Machining (resin, rubber, metal) ■ Decoration such as printing, painting, and coating ■ Others *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Other contract services
• Prototype Services

We would like to introduce our "Functional Silicone Rubber Products." The "Glow-in-the-Dark Patches for Children," utilizing phosphorescent materials, excel in safety and are made from silicone rubber that is harmless if put in the mouth. Additionally, the "Ultra-Transparent Sake Cups" made from LSR (Liquid Silicone Rubber) are highly transparent like glass, and they are safe as they do not break. Moreover, they have low thermal conductivity, providing insulation and making it difficult for water droplets to form. 【Features (Glow-in-the-Dark Patches for Children)】 ■ 10 hours of glow ■ The presence of active children can be easily recognized even in the dark ■ Harmless silicone rubber material if put in the mouth ■ Soft silicone rubber material *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• Contract manufacturing
• Other contract services

At Silicon Tech, we accept orders for various waterproof components, including key sheets and contrast agent injection devices. Since 2007, the prevalence of smartphones has significantly reduced the demand for key switches; however, switches other than those for mobile phones are still in demand, and we produce a wide range of products that add value through rubber alone, printing, and resin bonding. Additionally, we have a wealth of experience in producing products that require waterproofing (IEC standards IPX0 to IPX8), and we can accommodate this with our in-house leak testing equipment. Our website features several reference examples. Please take a look. *For more details, please refer to the PDF materials or feel free to contact us.*

• Rubber
• Contract manufacturing
• Other contract services

Various rubber components are used in medical devices. At Silicone Techno, we manufacture a wide range of products including hemostatic valves, duckbill check valves, catheters, and more. Do you have concerns about the slits in the valve parts sticking together over time? We recommend prototyping with silicone materials that prevent closure. [Case Study (Check Valve for Catheters)] ■ Material: Silicone Rubber ■ Specifications: Molding + Pure Cleaning ■ Applications - Duckbill type check valves serve as one-way valves in infusion circuits and various devices, allowing gas or liquid to be injected from one side while sealing against flow from the opposite direction. *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• Contract manufacturing
• Other contract services

Silicone Tech Co., Ltd. handles "Platinum Silicone." This product is silicone rubber that uses platinum as a curing catalyst. It has almost no odor, making it suitable for medical and food applications. Additionally, it has a low curing temperature (approximately 120°C), allowing for insert molding with certain resins. We can consider various products and parts, so please feel free to consult with us. 【Features】 ■ Uses platinum as a curing catalyst ■ Almost no odor ■ Low curing temperature (approximately 120°C) ■ Material selection can be tailored to products and requirements ■ Can be colored to your desired hue *For more details, please refer to the PDF document or feel free to contact us.

• others

At Silicon Tech Co., Ltd., we have developed "Antibacterial and Mold-resistant Silicone" in pursuit of greater safety. Products using this material can obtain SIAA certification. It exhibits inhibitory effects against 2,000 types of bacteria, including 60 major molds. Additionally, it contributes to the suppression of discoloration after silicone rubber molding. 【Features】 ■ Inhibitory effects against 2,000 types of bacteria, including 60 major molds ■ Low irritation ■ "Mold-resistant and antibacterial" effects equivalent to arsenic-based mold inhibitors ■ Long lifespan of "antibacterial and mold-resistant" performance due to low leachability ■ Suppression of discoloration after silicone rubber molding *For more details, please refer to the PDF document or feel free to contact us.

• others

Silicone Tech Co., Ltd. handles industrial silicone rubber, synthetic rubber, medical, and beauty silicone rubber. Our dedicated development and design personnel will respond to your requests with 2D drawings and 3D modeling. Based on the experience and technology we have cultivated over many years, we deliver high-precision silicone rubber, so please feel free to contact us with your requests. 【Sales Items】 ■ Medical rubber products ■ Various waterproof silicone rubber products ■ Rubber contacts ■ Industrial rubber products ■ Rubber sheets, etc. *For more details, please download the PDF or contact us.

• Rubber
• Contract manufacturing
• Processing Contract