アイメックス List of Products and Services

The Aimeks melting furnace does not require water-cooled cables and is approximately 30% more energy-efficient compared to conventional products. In the case of a typical 60 kW unit, operating for 4 hours consumes 240 kW/H. With our unit, it can be reduced by 30%, so 40 kW is sufficient. For a 40 kW unit, operating for 4 hours consumes 160 kW/H, resulting in a difference of 80 kW/H. Additionally, due to its compact design, it can be integrated with the furnace body. Please feel free to contact us if you have any inquiries. 【Features】 - Compact design allows for integration with the furnace body - No need for water-cooled cables, making maintenance easy - Reduction in cooling water usage *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

We would like to introduce our "Induction Heating Atmospheric Dissolution - Pouring Device." It features a compact high-frequency power supply unit with a built-in matching device, making it a space-saving device with flexible placement options. With no need for water-cooled cables, it has minimal power loss and significantly lower maintenance part costs. Please feel free to contact us if you have any inquiries. 【High-Frequency Power Supply Specifications (Partial)】 ■ Power Supply Model: IMC-ASH403 ■ High-Frequency Output: 40kW (max) ■ Output Frequency: Reference Frequency = 25kHz Operating Frequency = 15-30kHz (planned frequency) ■ Cooling Method: Water cooling (Cooling water inlet: Rc-1/2) ■ Protection Functions: - Output insufficiency, overvoltage, overcurrent, frequency anomaly, power supply temperature, cooling water, coil ground fault *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

The "IMC-PH3F-V4/IMC-PH5F-V4" is a high-frequency preheater for heating PVC sol. It heats the sol with a high-frequency preheater and heats the surface of silicone molds or the sol using electric or gas ovens. This allows for rapid and nearly uniform heating of the inside and outside of the sol. By utilizing the characteristics of each heating method, it can be adapted for thick products and surface products. Please feel free to contact us if you have any inquiries. 【Features】 ■ The large gap between the upper and lower electrodes allows for heating of thick or tall products. ■ The appropriate electrode gap can be set each time with just a push-button operation. ■ The front door opening and closing reduces the risk of being pinched and significantly improves the shielding function of the radio waves. ■ Improved heating efficiency and significant enhancement of workability contribute to cost reduction. *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We can conduct experiments and tests for trials of new application development, review of current processing methods, and verification for the selection of high-frequency equipment. We have prepared high-frequency induction heating equipment for rental, enabling induction heating experiments at customer sites. Heating experiments in a non-oxidizing atmosphere, heating experiments of ultra-thin steel wires, and melting experiments of precious metal materials are possible. Please feel free to contact us if you have any requests. 【Purpose of Heating Experiments and Tests】 ■ Confirmation of the feasibility of heating new materials ■ Confirmation of the applicability of induction heating ■ Transition of current production/processing methods ■ Review of existing equipment *For more details, please refer to the related links or feel free to contact us.

• Other services

The "IMC-AMH Series" is a high-frequency power supply that enables heating treatment of small-diameter and thin plate products with an output frequency of 1.5 MHz. With continuous output and linear control, it does not generate intermittent output like pulse control methods, and it can be easily integrated into automation equipment using a dedicated compact matching device. It is suitable for brazing carbide/diamond tools and heating treatment of small items and thin parts. 【Features】 ■ Enables heating treatment of small-diameter and thin plate products with an output frequency of 1.5 MHz ■ Continuous output and linear control prevent intermittent output like pulse control methods ■ Easily integrates into automation equipment with a dedicated compact matching device ■ With an output efficiency of over 95%, the required amount of power supply and cooling water is less than half that of electron tubes ■ Equipped with a cooling water monitoring function compatible with small-diameter heating coils, allowing for stable operation *For more details, please refer to the PDF document or feel free to contact us.

• power supply

We would like to introduce the various services related to high-frequency preheaters offered by Aimex Co., Ltd. We provide modifications to equipment through replacement of alternative parts and circuit changes due to the discontinuation of electron tube manufacturing. We can also respond to requests from domestic and overseas factories. Please feel free to contact us if you need assistance. 【Features】 ■ Repair and inspection of existing equipment ■ Upgrading of existing equipment ■ Maximum consideration for safe operations ■ Maintenance training and practical training *For more details, please refer to the PDF materials or feel free to contact us.

• Other services

We would like to introduce our dedicated high-frequency preheater. The electrode area is 300×350, with a maximum output of 5KW. This product is a high-frequency heating device for large items such as food samples. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Electrode area: 300×350 ■ Electrode gap: 50–150 ■ Maximum output: 5KW ■ Door operation: Air cylinder *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce our fully automatic high-frequency preheater. We offer a lineup for discrete devices and automotive electronics. This product is an automation device for tablet handling and high-frequency heating. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ For discrete devices - 3KW device for 3 pots ■ For automotive electronics - 3KW device for 1 pot (with built-in magazine) - 3KW device for 3 pots *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

Our company will examine how to create an appropriate temperature distribution for individual mold conditions in order to achieve a more suitable temperature distribution. We respond quickly to issues that arise in daily operations. If you are unable to resolve the problem yourself, we will provide on-site service. [Overview] ■ Regular inspections ■ On-site repairs ■ Modification work *For more details, please refer to the PDF document or feel free to contact us.

• Other services

We would like to introduce the high-frequency preheater from Aimex Corporation. It is equipped with a robotic hand for the transportation and insertion of tablets. There are also heating devices for large molded products such as food samples. Please feel free to contact us if you have any inquiries. 【Overview】 - A robotic hand is installed with the high-frequency preheater for the transportation and insertion of tablets. - For heating large molded products such as food samples. *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce the fully automatic high-frequency preheater from Aimex Co., Ltd. The device automates the handling of preformed resin (also known as preforms or tablets) from the initial stage to the insertion of the resin into the mold after high-frequency heating, and it is operational in factories as equipment for fully automatic mold lines. The preforms being processed can be handled one at a time, and there are also devices that can process three at the same time. 【Product Lineup】 ■ For discrete devices ・3KW device for 3-pot ■ For automotive electronics ・3KW device for 1-POT (with built-in magazine) ・3KW device for 3-POT *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "IMC-PH3F-V4/IMC-PH5F-V4" is a dedicated high-frequency preheater for producing "food samples." It can heat large food samples in a heating zone with a height of 150mm. The height adjustment of the heating zone can be easily done with a push button, making it very user-friendly. 【Features】 ■ Large gap between upper and lower electrodes allows heating of thick and tall products ■ Motorized elevation of the upper electrode allows for arbitrary electrode gap settings with just a push button operation ■ Upward and downward movement, door closure, and heating start can be controlled with left and right push buttons ■ Safety ensured with two-handed push button operation ■ Shield structure with BS components to reduce damage to shield fins *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "IMC-PH-V3 Series" is a high-frequency preheater that has significantly improved dust intrusion into the device by making major changes to the inlet structure and adopting polyester-based dust filters. It comes in roller electrode and parallel plate electrode types. Please feel free to contact us if you have any inquiries. 【Basic Concepts】 ■ Pursuit of safe operation ■ Pursuit of device stability ■ Ease of device operation ■ Suppression of wear and tear on consumable parts *For more details, please refer to the PDF materials or feel free to contact us.

• Other heaters

We would like to introduce the heating coils and crucibles handled by Aimex Co., Ltd. The crucibles are available in alumina and silica, while the heating coils come in ring and pancake shapes. Additionally, we offer general-purpose high-frequency power supply units. Please feel free to contact us if you need assistance. 【Product Lineup】 ■ Experimental crucibles ■ Experimental heating coils ■ General-purpose high-frequency power supply units *For more details, please refer to the PDF materials or feel free to contact us.

• Inductor Coil
• Other measurement, recording and measuring instruments

We would like to introduce high-frequency power supplies suitable for specific applications by Aimex Corporation. Our lineup includes the vacuum tube type "OMT-503VT" for CCFLs and the "IMC-PRF-5002," which performs automatic matching with a tap-switching system. We also offer high-frequency power supplies for ultrasonic cleaning. Please feel free to contact us if you need assistance. 【Lineup】 ■IMC-AMH-102 ■IMC-PRF-5002 ■OMT-503VT *For more details, please refer to the PDF document or feel free to contact us.

• power supply

The "IMC-ASH203BI model" is a compact size that can be integrated into the control panel of your equipment, with heating capacity equivalent to our standard power supply. The matching device and heating coil can be designed and manufactured according to your specifications. Additionally, we will create specifications suitable for you using our experimental facilities. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Output: 20kW ■ Frequency: 25/50kHz, +20%, -40% ■ Power supply: 3-phase 200V, 22kVA ■ Cooling water: Approximately 8 liters ■ Size: W260×D250×H360 mm ■ Weight: Approximately 25kg * For more details, please refer to the related links or feel free to contact us.

• power supply

The "IMC-AFH103/203" is a dedicated high-frequency induction heating power supply that employs IGBT/MOSFET modules with low ON resistance and high-speed switching characteristics, boasting an inverter efficiency of over 97% across all frequencies. Based on the high-performance IMC-ADH series, it achieves miniaturization and cost reduction for a pre-set dedicated load (the object to be processed). The matching devices can be arranged freely as all are of a separated type. 【Features】 ■ High reliability ■ High efficiency ■ Control stability *For more details, please refer to the PDF materials or feel free to contact us.

• power supply

The "IMC-ASH502" is a power supply device suitable for mass production equipment, combining a separate type of inverter with a compact power supply unit, allowing for a highly flexible layout. It is ideal for soldering, brazing, annealing, sintering, and hardening processes. Equipped with a temperature control unit, the power supply can be placed within the user control panel, offering a variety of convenient usage options. 【Features】 ■ High reliability ■ High efficiency ■ Control stability *For more details, please refer to the PDF document or feel free to contact us.

• power supply

The "IMC-ASH103" is a specialized high-frequency induction heating power supply designed for dedicated loads (processed materials) based on the high-performance IMC-ADH series, achieving miniaturization and cost reduction. The matching device can be arranged freely as all components are separated. Equipped with a temperature control unit, the power supply can be placed within the user control panel, allowing for various and convenient usage options. 【Features】 ■ High reliability ■ High efficiency ■ Control stability *For more details, please refer to the PDF document or feel free to contact us.

• power supply

The "IMC-ASH203/403" is a power supply unit that combines a separate type of matching device with a compact power supply, making it suitable for mass production equipment with a high degree of layout flexibility. Based on the high-performance IMC-ADH series, it achieves miniaturization and cost reduction for pre-set dedicated loads (the items to be processed). Equipped with a temperature control unit, the power supply can be placed within the user control panel, allowing for various and convenient usage options. 【Features】 ■ High reliability ■ High efficiency ■ Control stability *For more details, please refer to the PDF materials or feel free to contact us.

• power supply

The "IMC-ASH603" is a dedicated high-frequency induction heating power supply that has achieved miniaturization and cost reduction, targeting a pre-set dedicated load (the material to be processed) based on the high-performance IMC-ADH series. It employs IGBT/MOSFET modules with low ON resistance and high-speed switching characteristics. It boasts an inverter efficiency of over 97% across all frequencies. 【Features】 ■ High reliability ■ High efficiency ■ Control stability *For more details, please refer to the PDF document or feel free to contact us.

• power supply

The "IMC-ADH803" is a versatile high-frequency induction heating device that can achieve appropriate output through trans-tap switching even when heating different materials (with varying material resistances). The adoption of a one-touch clamp system allows for frequent and quick replacement of heating coils. With the two-system output switching method, it is possible to configure 1-power supply/2-heating unit, enabling high-efficiency production. 【Features】 ■ High reliability ■ High efficiency ■ Control stability ■ Stable continuous operation *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

The "IMC-ADH403/603" is a versatile, high-frequency induction heating device that allows for the adoption of various temperature control methods. With the adoption of a dual-output switching system, it can be configured with 1-power supply/2-heating unit, enabling high-efficiency production. Additionally, the matching section and heating section are connected via flexible cables, making it easy to move the heating coils during operation. 【Features】 ■ High reliability ■ High efficiency ■ Control stability ■ Stable continuous operation *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

The "IMC-ADH103/203" is a versatile high-frequency induction heating device that can achieve appropriate output through trans-tap switching even when heating different materials (with varying material resistances). Since the power supply unit and matching unit can be separated, the heating section (coil section) can be arranged freely. Additionally, by adopting a dual output switching method, it is possible to configure 1 - power supply unit / 2 - heating unit, enabling high-efficiency production. 【Features】 ■ High reliability ■ High efficiency ■ Control stability ■ Stable continuous operation * For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

The "IMC-ADH502" is a versatile, high-frequency induction heating device that allows for the adoption of various temperature control methods. It features a one-touch clamp system for the frequent replacement of heating coils, enabling quick changes. Additionally, even when heating different materials (with varying material resistances), appropriate output can be obtained through the trans-tap switching. 【Features】 ■ High reliability ■ High efficiency ■ Control stability ■ Stable continuous operation *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

This catalog features high-frequency power supplies and other products handled by our company. Starting with the versatile and multifunctional "IMC-ADH series," we also introduce the "IMC-ASH/AFH series" for dedicated loads and heating coils, as well as high-frequency preheaters. Additionally, we include the characteristics of induction heating, application examples, and equipment cases related to induction heating. We encourage you to read through it. [Contents (excerpt)] ■ What is high-frequency heating ■ Electromagnetic waves and high-frequency heating ■ Characteristics of induction heating ■ The expanding use of induction heating ■ High-frequency power supplies boasting exceptional reliability ■ Compact and flexible high-frequency power supplies *For more details, please refer to the PDF document or feel free to contact us.

• High frequency/microwave parts

In dielectric heating, the "high-frequency preheater" is primarily used in the molding process of thermosetting resins to preheat the mold resin for improved productivity and moldability. This column provides a detailed introduction to the fields of application for dielectric heating. It can be utilized in various areas, including semiconductors and electronic components, electrical and mechanical parts, and tableware and fixtures. For application technologies of high-frequency heating, please contact Aimex Co., Ltd. 【Fields of Application】 ■ Semiconductors and electronic components ■ Motors ■ Electrical and mechanical parts ■ Tableware and fixtures ■ Sample industry *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

This column introduces the fields of application for induction heating. "Induction heating" can be utilized in various processes, including thermal processing such as melting and casting of ferrous and non-ferrous metals, as well as heat treatment like quenching. It is also applicable in shaping processes such as forging and wire drawing, and in assembly processes like brazing and shrink fitting. Additionally, ferrous and non-ferrous metals can be used as heating media for a wide range of applications, including inserting metal helicoils into resin molded products, bonding resins together, and promoting the drying and curing of paint films and adhesive layers. 【Fields of Application】 ■ Heat Treatment: Quenching/Tempering/Purification/Structure Control/Amorphous ■ Joining: Brazing/Soldering/Diffusion Bonding/Electric Resistance Welding ■ Resin Processing: Bonding of Molded Products/Container and Cap Sealing/Mold Heating ■ Shaping Processes: Hot Forging/Hot Rolling/Wire Drawing/Powder Sintering ■ Assembly Processes: Shrink Fitting/Shrink Removal/Metal Inserts/Adhesive Drying *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

"High-frequency heating" not only allows for the heating of materials within a container but also features high control over high-frequency output, enabling rapid and precise output control, among various other characteristics. In this column, we will introduce the objects of induction heating and dielectric heating. In both cases of induction heating and dielectric heating, the amount of heat generated varies depending on the electrical properties of the material (such as resistance). Therefore, we have created this column to help you confirm what can and cannot be heated. We encourage you to read it. [Overview] <Induction Heating and Heating Targets> ■ Objects that can be heated (conductors) - Ferrous metals (Fe, SS, SUS, etc.) - Non-ferrous metals (brass, gold, platinum, nickel, lead, copper, aluminum, etc.) - Graphite (carbon) or their alloys *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

In this column, we introduce the phenomena and reasons behind the heating of induction cookers (IH) and microwaves, as well as high-frequency heating. "High-frequency heating" is a heating method based on the same principles as induction cookers (IH heaters) and microwaves. By using high-frequency power, it is possible to heat materials that differ from commercial electricity. 【Features of High-Frequency Heating】 ■ Based on the same principles as induction cookers (IH heaters) and microwaves ■ Uses power in the radio frequency range (3 kHz to 3 GHz) ■ Capable of heating internal packaging materials ■ High thermal efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

This column introduces the features and application examples of high-frequency dielectric heating. "High-frequency dielectric heating" utilizes the differences in dielectric loss coefficients of materials to enable localized and selective heating. It can also heat internal food materials wrapped in plastic films and similar packaging, and since the heated object itself generates heat, it is more thermally efficient and economical compared to external heating. 【Features】 ■ Rapid and uniform heating both internally and externally ■ Direct heating in the atmosphere ■ Heating of materials inside packaging is possible ■ High thermal efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

This column introduces the principles and features of high-frequency dielectric heating. "High-frequency dielectric heating" has the characteristic of simultaneous heating of both the inside and outside, allowing for rapid heating, as well as easy heating control. It is also widely used for vinyl welding and the adhesion of building materials, with various applications depending on the shape of the electrodes. 【Features】 ■ High heating efficiency as the object itself generates heat ■ Simultaneous heating of both inside and outside allows for rapid heating ■ Selective heating of objects inside the container ■ Easy heating control *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

Our company proposes and provides a high-frequency induction heating system that maximizes the features of induction heating. In this column, we will introduce the components of the high-frequency induction heating system in detail. The high-frequency induction heating system consists of a high-frequency power supply, a matching section (matching circuit), and a heating coil, and is used for purposes such as melting, hardening, and brazing, depending on the material of the object being heated. 【Main Components】 ■ High-frequency power supply ■ Matching section (matching circuit) ■ Heating coil ■ Temperature measurement and control *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

This column introduces the principles and features of high-frequency induction heating. It is widely used for processes such as quenching and melting, with a common example being "induction cookers." In addition to being able to heat under pressing conditions, it has features such as very low environmental impact, and various applications depending on high-frequency output and the shape of the heating coil. 【Features】 ■ Direct heating for high efficiency (the heated object itself generates heat): enables rapid heating ■ Ease of heating control (temperature, time, selectivity): easy output control with quick response ■ Safety and environmental impact (safe operation, working environment): does not use combustion such as gas *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

This column introduces the meaning and standards of high-frequency output used in induction heating and dielectric heating. It explains the pathway from the factory power supply to the heat generation in the heated object. The content is described based on the general circuit configurations of both induction heating and dielectric heating. Our company offers customers proposals for identifying causes and basic solutions based on the fundamental principles of induction heating and dielectric heating. *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

In this column, we introduce the differences between induction heating and dielectric heating. Induction heating refers to the phenomenon where metal is heated by "induced currents/eddy currents" that are induced in the metal by an alternating magnetic field generated from the current flowing through a heating coil (also called a work coil or inductor). Additionally, materials containing moisture and plastics with bipolar characteristics are heated by dielectric heating. Our company proposes the fundamentals of cause investigation and solutions to our customers based on the basic principles of induction heating and dielectric heating. *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

We propose and provide a high-frequency induction heating system that brings out the characteristics of induction heating. To meet our customers' diverse needs, we gather the expertise of external companies with specialized technologies. We strive to conduct demonstration experiments and tests, as well as develop, design, and manufacture equipment in collaboration with our customers, aiming for optimal matching between the heating material and the heating equipment. Additionally, we place the highest importance on support after delivery, actively responding to changes in our customers' heating materials, processing requirements, process changes, and any troubles that may arise. 【Sales Content】 ■ Induction Heating Field - Design and manufacture of power supplies for induction heating, various high-frequency induction heating devices, and heating coils ■ Dielectric Heating Field - Repair services for high-frequency preheaters and other electronic tube-type high-frequency heating devices, as well as the provision of maintenance parts ■ Other Power Supply Related - Power supplies for ultrasonic cleaning, plasma excitation, and various DC high-voltage power supplies ■ Others - System upgrades for automation devices related to high-frequency heating, cooling water circulation systems, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

The "IMC-ASH/AFH Series" is a power supply device suitable for mass production equipment, featuring a separate matching section that can be combined with a compact power supply unit, allowing for a highly flexible layout. By assuming a somewhat limited range of heating targets or variations in heating coils, we have achieved miniaturization and cost reduction. We have adopted IGBT/MOSFET modules with low ON resistance and high-speed switching characteristics, boasting an inverter efficiency of over 97% across all frequencies. Equipped with a temperature control unit, it allows for various convenient usage options, such as placing the power supply unit within the user control panel. 【Features】 ■ Achieves miniaturization and cost reduction by targeting pre-set dedicated loads (workpieces) ■ High inverter efficiency across all frequencies ■ Flexible placement with a separate matching device ■ Suitable for mass production equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Electric furnace
• Power Supplies